WANTED

October 2004

 

86. kevin_lair@yahoo.com message: i am looking for a harley enduro from the seventies in good shape. preferably 250cc. but i am in iraq right now and won't be home till april next year i think we could still work out deal though email me if able to help

85. pigstye13@aol.com message: WANTED
I need a matched set of 1953 Harley 165 ST motor cases. Must be in EXCELLENT condition,no repairs or cracks (903) 873-6644

84. mjbute@bigdam.net message: looking for original 48 panhead heads in good shape[rebuildable]also tail light ass. for 1968 sprint

83. kmstrade@aol.com message: wanted 19-22 HD unrestored engine so i can rebuild. thanks

82. orionskyltd@aol.com message: wanted
Windoff 1937-? or good Indian

81. danwolf@charter.net message: need saddle bag brackets for 841 Indian

80. pigstye13@aol.com message: Looking for any of the 1948-1962 Harley Enthusist Magazines That have "the New Year models Announcement" I believe most all of them are the September issue. (903) 873-6644

79. pigstye13@aol.com message: Looking for any of the 1948-1962 Harley Enthusist Magazines That have "the New Year models Announcement" I believe most all of them are the September issue. (903) 873-6644

78. 48hdbob@onramp.bz message: Wanted: Harley-Davidson in-line standard handlebar, brazed type. No junk

77. oldmtrcyc@msn.com message: Wanted:
Headbadge for Orient motorcycle and any literature.
Magneto for 1914 Indian twin.
Cases and magneto for 1915/16 HD twin.
Decent frame for 1911 HD single.
have some stuff for trade.
Thanks!

76. dmk441@yahoo.com message: WANTED: 1912 HARLEY GAS TANKS, REAR STAND, AND REAR SHEAVE, EMAIL ME WITH WHAT YOU MAY HAVE, THANKS AGAIN GEORGE.
DAVE

75. cvlrymn@yahoo.com message: WANTED! Disc brake set up for Servi-Car rear. Also looking for aftermarket axels and differential internals for same. Thanks George!

74. SALES@MOTORCYCLERESCUE.NL message: WARNING: BE CARFULL WHEN SELLING TO SINGAPORE, THEY LIKE TO BUY S&S OR REV TECH ENGINES AND PAY WITH CREDITCARDS !!!!!THIS IS A SCAM!!!MOST CARDS ARE FRAUD TALKING OUT OF EXPIRIANCE!!

73. jds39knuck@earthlink.net message: LOOKING TO TRADE A 39EL REAR HEAD AND ROCKERBOX FOR A FRONT, OF THE SAME. THANKS, JD

72. ajkj.bennett@virgin.net message: Wanted for 1914 Indian 1000c twin engine, Magneto drive housing and gears, also front cylinder head. My current front head gives a misalignment between valve and tappet. Does anyone know what year of twin this head is from? i suspect it may be earlyer. Information on these machines is very limited in England (uk) Any help would be appreciated. Andrew.

71. owlo@death64.freeserve.co.uk message: Wanted Handlebars to suit 1915 Harley Single Model 10C. Early J or JD could be ok.
Regards Owen.

70. djfitz@ocslink.com message: 1957 Panhead front fender tip and tank emblems (single or pair) needed for a nice unrestored bike. No repops please. Thanks....

69. wohgar@msn.com message: left side engine case for 53 pan

68. wirajaya@roadfly.org message: Dear Seller,

I want to order from you S&S or Revtech engine for Harley Davidson. Can you supply ? Can you ship to Singapore and accept credit card ?

Looking forward to hear from you

Best Regards,,
Wira Kusuma

67. carl.d@mobilixnet.dk message: Need parts for Henderson 1918, have for trade oiltank for Yale (like new), and parts for other motorcycle.

66. 1qazaq@adelphia.net message: Looking for a motor to put in my 37 chassis,big ULH or knucklehead,Title A plus?Consider any year?

65. phdralph@webound.com message: WANTED..36-66 SIDE CAR PARTS...

64. tomjr@conveyorsystems.com message: looking for pictures or info on mid 70's police harley FLH
Thanks George for this site.

63. wallner@cslsoft.de message: searching original waffle grips WITHOUT hole for 48 to 52 panhead. Black or blue ones. Will pay good dollars. Pay by PayPal, money order or cashier check or on any other way. Please offer all.
best regards
harleywallner

62. cc9dog@aol.com message: HELP!!!
looking for a 57 FL pan motor or set of cases. i have the complete bike and missing a motor. this is for my own personal use not for resale . also i just finished restoring a 42XA and have some left over parts for sale or trade. nos head light bracket, nos horn bracket, nos battery mnting plate that gets welded to the frame, great used XA front brake backing plate with shoes and levers.. looks like a upside down 45 plate. if interested please e-mail me at above address put harley parts in the subject line. or fax me at 845-528-0139. thanks.
pete

61. shuvl427@comcast.net message: desperetly need a 1936/1939 right side gas tank for an overhead model big twin hd any help would be great thanks

60. oldmill@rideau.net message: EVEREADY AUTOPED and SMITH MOTOR WHEEL (or just parts) WANTED FOR MUSEUM

59. oldmill@rideau.net message: WANTED, FLXI SIDECAR , OFFERING CASH AND/OR TRADES , THANKS, BARRY

58. vklm@adelphia.net message: WANTED 1928-1931 101 INDIAN SCOUT restoreable runner but all concidered 540-273-7000 usa

57. tipatcarmc@juno.com message: I need a 1959 harley panhead motor with a title running or the motor needs to be rebuilt.Tim

56. ironwigwam@@aol.com message: Wanted: Any and all parts for a "Molitaire" or "Molitar" motorcycle or wooden rims for same.

55. 48hdbob@onramp.bz message: wanted: 74599-77A, circuit breaker, battery. This is the circuit breaker that comes right off the positive battery post on late Shovelheads.

54. dotman@qwest.net message: Looking for an oil tank for : 1984 FLT , parts dept says its obsolete
however part from 85 ,86 will also fit dotman@qwest.net

53. xrracer@aol.com message: 1911 Shaw/Kokomo.... Always looking for parts -lit for our Kokomo, Want to make it live again, Need original handlebars for starters. Thanks George!! Dave

52. rebelbugs1@aol.com message: I have a 1975 sportster and am looking for a shiftrod for it can anyone tell me where i can find one without buying the whole forward control kit and would like a photo of the inside of the primary cover where the clutch cable hooks up thank you David

51. Tony@acmeaust.com message: Wanted for 1951 WRTT Project:
1) Transmission (yeah,yeah,I know....)
2) Front fender "" "" ""
3) Handlebars assembly "" ""
4) Seat "" "" ""
5) Gas tank strip "" "" ""
Have good ol' cash, some WR parts, old HD parts, trade, cash, swap etc. Thanks George!

50. bondini@hotkey.net.au message: Wanted, Ace or Indian ace forks or parts, anything considered.
thanks for the service George.

49. lestweforget@shaw.ca message: I'm looking for a 1920-27 ACE basket case or even just a fairly complete motor for one.Hats off to you George!Pat.

48. vtwin@ix.netcom.com message: WANTED: 1966-69 Shovelhead cases with title.

47. outlawguns@msn.com message: Need engine parts and tranny for 1926 B up 350 side valve single or let me no what you got.
Thanks Bud outlawguns@msn.com

46. jimmyd@heart.net message: Looking for an original 1964 Panhead Duo-Glide Riders manual in decent shape. Will pay fair price. Please e-mail jimmyd@heart.net

45. shovel100@charter.net message: WANTED

does anyone out there have a wr cam / gear cover for sale or trade?
ive got tons of parts including nos narrow wr clutches std bore wr cyl's plus plenty of other goody's

also i have a mint condition set of 41-46 wr narrow tanks i'd like to trade for 47-50 ones
i'd even sweetin the trade with some cash or buy the tanks outright?

44. nukkelhet@yahoo.com message: need 2 knucklehead rear inlet rockerarms,
Thanks.

43. mark@linkcycles.com message: I'm going to be making a few sets of transmission gears and shafts for Harley Sport models for personal use. (Opposed twin 1919-1923) I'm going to make a couple extra regardless, but if anyone needs any of these parts, let me know ASAP and I can make extras of what people need. They will be fairly priced. Call or email me if you have any questions.
Mark Masa
Link Cycles
330-721-9344

42. ebuyou@dm-tech.net message: Looking for a basket Knuckle or UL 1936-1947. Don't want to spend too much but I understand the market. What do you have? How much of it is actually there? How much is it? Where are you in relation to Northern California (for shipping/picking up purposes)? Please, no 45" models. No Servi-Cars.

41. elemore.3@virgin.net message: WANTED - BIG TWIN OR FOURS HARLEY, INDIAN , ACE , CROCKER, HENDERSON - 1925-1965 ANY CONDITION BASKET CASE OR RUNNER PLEASE SEND PICTURES AND PRICE - THANKS

40. elemore.3@virgin.net message: WANTED - ORIGINAL CROCKER ENGINE CASINGS WITH GOOD NUMBERS PLEASE EMAIL ME AT elemore.3@virgin.net

39. nikolaus.huber@glashuber.at message: Hallo

Need some original parts for EXCELSIOR 1000 ioe from 1919.

Best regards
Niki Huber

38. carl.d@mobilixnet.dk message: Parts for: Henderson 1918, Ner A Car, Thor 1916, Reading Standard.
Have parts to trade with.

37. pigstye13@aol.com message: WANTED::: rear wheel hub for 1955-57 Harley HUMMER (B model) N.O.S. ONLY Part # 41016-55

Have cash or 1930-1962 H-D NOS parts to trade,restoration work,whatever you need for the hub is fine. (903) 873-6644

36. pigstye13@aol.com message: WANTED::: rear wheel hub for 1955-57 Harley HUMMER (B model) NOS ONLY have cash or 1930-1962 H-D NOS parts to trade,restoration work,whatever you need for the hub is fine. (903) 873-6644

35. sammaddy@zoominternet.net message: WANTED: one or more early INDIAN handlebar control sleeves (pre-101 type from early-mid '20s). Need not have spirals inside.
Also, rear external brake band for INDIAN Powerplus. Call Scott at
(610) 932-0580 after 4pm EST. Thanks for looking!

34. jesseichick@sbcglobal.net message: WANTED: a set of exhaust heat shields for my '69 FLH... Also looking for period accessories - parking light brackets (68518-68), Electroline Torpedo lights, rocket lights. E-mail me and let me know what you have.

Thanks George!!!

33. info@wastedspark.com message: I am looking for an original running 1958 1/2 or 1959 Harley-Davidson XLCH. Anyone having either of these models to sell, please contact me at 802-439-5851 or the e-mail address given with this request. Leave message for Richard.

32. thevettshop@aol.com message: WANTED: I need the plate that goes on top of a 30's Indian ignition switch plate. This is a round plate with "Indian" and switch positions printed on it. Thanks

31. shuvl427@comcast.net message: i recived the same scam from mr hoover reiberson wanting to by from me also i assumed bogus

30. DANPATCH@PLANETKC.COM message: WANTED 41 KNUCKLE CASES OR MOTOR DAN 913 268 5314

29. shovel100@charter.net message: heres a email i got the other day
i traced the email to italy so be careful out there i'm positive this is a scammer

Dear seller,
My sincere apologies for contacting you via e-mail to acquaint you.
Mr. Hoover Riebson I live in 1454, Proscov Bhavan, 110, CDA Avenue, Ctg-4000.
Bangladesh. I saw your advertisement onhttp://www.omnieye.com/mc/forsale3.html.
and I am interested in it, I will like to purchase these products of yours
Userd MotorCycle For Sale which I do not know the price or the amount you
are selling it and I will like you to tell me the price to the product bcos,
I am interested in buying it I am a dealer and I deal with goods like the
products will like to purchase from you I want your interest Over this product
if you will like to sell it to me also I will like to know my method of
payment bcos. I will like to pay you with a cheque and also I want u to
know that I will take care of the shipment by our personal shipping agent
company that will take care of the shipments. My shipping agent to start
coming around for the pick up and he going to check all the conditions before
pick it or you look for shipping company in your country to ship it, but
if that is okay by you let me know.
I'll need the information contact details in sending the payment to you
and it should be listed in this form...
Full name:
Full address:
Telephone number #:
Last price:
With you for further details....

28. jcsrestoration@cswebmail.com message: WANTED: 1912 or 1913 Harley single belt drive engine, any condition, will take partial engines and incompletes. Also need a 1912 or 1913 Harley single right side gas tank, can also be in any condition, and a 1912/13 Harley rear stand. and rear wheel parts, hub(non clutch), belt sheave. Email me with what you may have otherwise contact me at (920)627-2163, thanks George.
Dave

27. sbyrd@iocc.com message: 1930 DL (45) frame for sale or trade for VL frame. Excellent condition. Currently has springer front end (may be correct, not certain) and 18" rims and tires on it; will sell as complete or part out. Call or email me (Scott)with questions or offers (870) 403-2808

26. 33vle@optonline.net message: Looking for early front hub/wheel - 40 spoke - eclipse type- not for Harley but for a Dayton,Sears or DeLuxe front end...
Rusty but workable preferred
Thanks

25. MOT54@AOL.COM message: WANTED!! 1938-39 CHIEF FRAME,1935 CHIEF CYLINDERS & HEADS YOUR PRICE PAID.406-434-2005

24. gsol@gmx.at message:

Parts and Information for the restoration of Excelsior SuperX 1925 and 1930: rims, ammeter, speedo 160km/h, headlamp (bullet type or 1931 Motolamp), Horn, Aluminium Tanks, 1925 Ignition switch and many more small parts....all contacts and information welcome! I have original Indian parts to swap!
Thanks George!

23. Modenaro@aol.com message: Wanted, early HD single in restorable cond.,
Looking for a 1928, but any early single project bike
will be considered.

Modenaro@aol.com

22. shovel100@charter.net message: if anyone gets a guy trying to sell them parts by the name of

Vincenzo Dave

HUDA ELSAYED IBRAHIM

i'd highly reccomend you not do buis with him
i bought some parts from him the first deal went fine then he burned me for 400 bucks

21. 100@charter.net message: a@a.com if it hurts your eyes then dont look at it

20. a@a.com message: Your site looks like a 5 year old designed it. It actually hurts my eyes.

19. alan@drivesouth.us message: Hello ,I'm looking for a 40's Sport Scout front frame section,any leads welcomed,thank you.

18. deal@beautyofspeed.com message:
WANTED //////// WR & WLDR PARTS ////////////
I'll buy any WR & WLDR parts from individual used parts to piles to complete bikes. Serious buyer. email me at deal@beautyofspeed.com and we'll figure something out.
WANTED //////// WR & WLDR PARTS ////////////

17. oldmtrcyc@msn.com message: wanted:
1913-1915 Indian twin frame.

16. weyland@bellsouth.net message: WANTED - Generator Shovelhead cases
Condition isn't the most important thing.
Finding a set is.

Thanks.

Weyland

15. phdralph@webound.com message: WANTED...1955 BIG TWIN HEADS..

14. motorcityjim@cox.net message: Looking for 55-64 Panhead engine.Prefer complete but will consider any.

13. crumb1111@netzero.net message: Looking for a 41-45 big twin rolling chassis. Have a 41 el motor and tranny and looking to put it back original. Contact me at 918-520-8508

12. sales@victorylibrary.com message: WTB Scout girder in excellent condition, mostly complete or better.

11. shovel100@charter.net message: wanted -- 18" or 19" 400 firestone tires with 80% or better tread
they dont have a name on them but have a cross type tread pattern for the center row of the tread

on page 462 of palmers shows a bike with them on it

also I'm in search of a set or two of 49 up servicar springer handle bars
and a nice rear inline spring fork
I have alot of nos or good used rare parts for trade or good ol' cash

thanx george

10. mrmotorcycles@att.net message: Need 1948 Tank Emblems in Very Good to Excellent condition(or NOS). NO DENTS!

9. lesliewhit@aol.com message: Wanted 39 big twin harley frame call 478-256-4254

8. pigstye13@aol.com message: WANTED: I need a NOS (new old stock) tail light mounting bracket Harley Part # 68040-55 This is for the 55-59 Harley Hummer.Parts to trade,work to trade or cash.(903)873-6644.Thanks

7. hetuch@adelphia.net message: Looking for a solo seat, or aftermarket frame type low rider seat, in white or black, for a '66 Shovelhead.
Also a front bumper for '66 HD.
440-439-9445 hetuch@adelphia.net
Thanks
Paul

6. bbop@dblclickit.com message: wanted 1929-1931 henderson complete bike basket case or starter project. no restored machines please . have harley bikes and parts for trade.

5. workforbikes@earthlink.net message: To Mr. George Pardos or to whom it may concern I am patrick. I have been telephoned this afternoon twice the first was a threat the second was from a friend to let me know what has been done.
I do know Jim tuck but has has no representaion of any of my goods. I further understand after being alerted to what has been going on with yuor web pages concerning Jim and others has nothing to do with me.
I did try to call Mr.Tuck but got no response. I respectfully ask you to remove his add and to not allow him to further use my name.
As far as Jim go's I ask that he return goods to Ronnies shop the Bruce put in his truck.
I state that im and I will never talk again and that he needn't contact me for any reason. Him and I are no longer going to do any buisness as I do not play games or feel that as I have read "childish behavior" is neccesary. I would thank you George and as well let you know after becoming aware of what has happened I will remove you from my favorites list. In parting I would like to thank you for allowing me to sell a few bikes over the last couple of years.
Hope all go's well for you.
Regards,Patrick

4. tcob013@bellsouth.net message: Wanted: 1936 to 1965 FL PANHEAD or KNUCKLEHEAD basket case. Matching numbers and original transmission.Don't care about the rest, But wouid take frame and sheetmetal for a fair deal. I would like to thank GEORGE for a wonderful web page.

3. amca2475@earthlink.net message: Wanted: Buyer for 1948 INDIAN CHIEF 80ci low miles Restored! NO RESERVE! now listed on EBAY < http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2492078876&rd=1&sspagename=STRK%3AMEWA%3AIT > Paint and chassis Restoration done by: Patrick James , 743 N. Van Ness , Fresno, CA 93703 USA (559)266-5945 , (559)266-4951 - James James Motorcycle Spares - American and british parts 1901 - 1960 (559)229-7267. Motor and Transmission was Rebuilt by: Vintage American Motorcycle ,Machine Shop Service Since 1975, Complete Indian Four Motorcycle engine rebuilding service including
Line Boring and Setup
Top End Rebuilds
Transmission
Kevlar Clutch Conversions
Also Vee Twin Motor and Transmission Rebuilding
All work done on site for faster service.
Proprieter - Robby Robinson < http://www.cycletownusa.com/vacycle/index2.html >
email < vintageamerican@sierratel.com >
phone (559) 683-6481 ... Chrome prep and Polish done by: D. Turner's Stainless - Straightening and Polishing, 4388 S. Willow, Fresno, CA 93725 (559)237-0892.

2. amca2475@earthlink.net message: Yer the only idiot screwing around on this site. whats Your name, address and phone #???? he who hides behind fake email addresses and spams everyone here. Why dont you ID yourself little boy???? mommie forget to take your buttplug out today?

1. gpardos@ix.netcom.com message: Wanted. 1910 or earlier HD

September 2004

82. aharleykindalife@hotmail.com message: Looking for a 1926-36 Harley JD springer frontend (I-beam style)

81. doesntmatter@yahoo.com message: I'll save all your time looking for the idiot's (amca2475@earthlink.net) name and address in the roster. His name is James K Tuck. 4060 N Larkin Ave, Fresno, CA 93727. Phone number is 559-348-1220. Now would James and the other idiots that are screwing around with him take it offline? GROW UP!!!

80. amca2475@earthlink.net message: Nice try nobody, Attention Everyone! this is not ME (amca2475@earthlink.net) below - OK! ok its nobody@nowhere.net (among many other alias email names he uses here and such as on ebay aka EBAY I.D. =erlebik( -1 )
E-MAIL = ERLEBIK@AOL.COM
) obviously he has nothing better to do but play games on the computer with cookies and the cause of spamming of this site and talking to himself on this site (such as using my address here) trying to stir up some trouble for himself while trying to pass off phony emails and listings here,etc., He basically does alot of whining while trying to stir up trouble playing his juvenile games here and on ebay aliases aka- EBAY I.D. =erlebik( -1 )
E-MAIL = ERLEBIK@AOL.COM
-among others used over the years. Everyone on this site knows me, knows who i am, my phone #, where i live, etc. He doesnt have the balls to come out in the open so he hides behind fake names,emails,etc. and the AMCA wont let him in the club so he plays these games with this site and ebay people. If George wants to list pictures that are being messed up or screwed up by his software? (or whatever the reason or problem is with that) thats HIS business, (maybe he can or will do something about this in the future?, maybe not?) as i send in good quality in-focus photos, if there was a problem receiving them or posting i have NOT been informed of any problems about THIS from George. There has been quite a few photos that seem to have been processed here from other listings other than myself that i have noticed over the last year that others than myself have had the same problem. Some just as bad scrambled, some not so bad but most seem to start about the middle of the picture down like a reverse negative or worse, some just lightly near the bottom distortion and some worse like 90% of the picture. This site seems to process all pictures with high resolution or low resolution so i am not sure why there is a problem, All i know is i am not sending anything but good quality pictures (with some posting good and some not), and some not at all? Not sure why but only George can say for sure. Maybe some of you all are having the same problems here as i see some photos submitted that are having the same problem as some of mine in the past and some not being listed at all if the other listings by other people are credible. This is Georges site and he can submit, omit what he likes for whatever reason, but till this date i have not received anything from HIM regarding NOT wanting me to list anything i have on HIS site here. SO what do i care what else anybody else thinks about my parts, bikes or deals done or NOT? I dont, but So as far as i am concerned IF he chooses to not fix the text and picture listing problem its probably because he does not have the time to so, other than canceling out the submitted ad before or ads already listed which his software can not seem to cancel out before they get listed? Personally i do NOT care if any of my ads are listed or not and would prefer they not be listed or canceled out all together along with all the other crap if this problem can not be fixed on this site, but thats up to George, HIS site, HIS decision. I am not going to let some punk hacker, that never buys or trades anything and just likes to play spoiled brat kiddie games, keep me from posting parts or bikes here, THAT is up to George. If he wants to let this hacking of emails and crap continue on his site then thats up to him, i have stayed off this site for over 3 months just to see what would happen and recently listed some good rare parts again, some not so good parts, but mostly good rare AMERICAN parts, all old American, different makes, years and marques, mostly pre 50s stuff to early teens parts with good pictures. The person submitting email text here below with my email address is NOT ME and likes to play games hacking/spamming everyones emails that logs on and gets off on someone responding to his childish, juvenile, jr. high school mentality remarks as he can not get thru my security via my email address. He likes to assume many different email names and plays these games especially when YOU dont want and wont do business with HIM. Anyone whom wants to contact ME will have to do so via telephone to confirm if parts are still available or not. Anyone wishing to do so just has to look in their AMCA Rooster (or contact someone in the club with one if you are not a member) for # 2475 as the last 25 years my # amca2475 has not ever changed. I've made some good trades, buys and sold a few things in the last 6 years here, but as the market goes it only takes only one jerk with computer hacking skills to mess up a good site for everyone. Since this is NOT a secure site, You will have to contact me via phone for parts, bikes available. IF you are serious about doing business then you can make the phone call (from any AMCA Rooster) otherwise disregard any further comments supposedly from this email address here on this site, (its old BS, a waste of time and quite boring and he feeds off it and sure to make more in the future as he has no friends and has nothing better to do), just best to ignore any future crap postings here on this site if they get posted as it is NOT me.

79. hogluvr1340@yahoo.com message: Looking to trade set of '66-'73 Harley-Davidson Servicar right-hand shift tanks in excellent shape for similar set of '47-50 45" WL or Servicar right or left-hand shift tanks. Tanks appear to have original white paint and are in excellent condition.

78. oly1212@msn.com message: 1918 Excelsior twin parts. Rear brake internal parts, mag and generator for same. thanks

77. amca2475@earthlink.net message: This is DASTUPPPID!!!!!!!!!!! HARDLY DAVISON OWNERS
they don't know what they want.
let me see into the toilet and see your reflection on the parts you need or are you just CRAZY like me!!! derby burby or do you need a FURBY.

76. cpiche@globetrotter.net message: wanted 41-46 el or fl matching cases set with good numbers for an original restoration .desperately need. amca member

75. kigy@centurytel.net message: WANTED: POLICE LIGHT FOR FRONT FENDER TO FIT 1969 SERVICAR- HYRDA GLIDE FRONT END, THANKS, mike

74. kigy@centurytel.net message: WANTED: RED AND BLUE POLICE SPOTLIGHTS, OR JUST THE LENSES FOR 1969 HYDRA GLIDE FRONT END, mike

73. rogerorton@sbcglobal.net message: Wanted 1912-1914 Harley Davidson Twin Cylinders, or complete engines

72. rogerorton@sbcglobal.net message: Wanted early Pierce 4 cylinder motorcycle engine. Have cash willing to pay a fair price. contact at above e-mail with photos, or call 916-362-3772 Pacific Coast time

71. alan@drivesouth.us message: Info relating to 70 and 69,Maybe it's the nude female that's the most important part!

70. amca2475@earthlink.net message: So you want a 3 hole derby cover, FOR WHAT!!!!!!!???????? is there some kind of stupid diease going around that i'm not awear of??? or is everybody psychic but me? Hmmmmmmm let me flip a coin or check my crystal ball,oh its for a limey right and they only made one year and model that this part fits and everyone knows the make, year, model and cc displacement for this rare part you need and what part of the motorcycle it fits, it is a motorcycle right,wait the cards say its modped made in tiawan.

69. tophat@mchsi.com message: Wanted- 3 hole derby cover with a nude female on it. Stamped steel or ?

68. wolfgang.scheerer@iname.com message: looking for original pan/knuckle decals 1947-1950
thankx george

67. dmk441@yahoo.com message: WANTED:I Need a 1912 Harley right side gas tank(for a single), can be rough, or primered/repainted, but original,also need a 1912 Harley non-clutch rear hub or hub shell, pedal crank & sprocket, and toolbox(for a single). I have a set of 1913 Handlebars and a twin toolbox(needs work, but is original) for partial trade. Email me with what you may have, thanks George
Dave

66. stonemenow@hotmail.com message: 1936 EL knuck frame ,got one? Will pay top $ !!!

65. amca2475@earthlink.net message: Wanted - Somebody with a brain! Thanks George, all parts are gone, this site is better than ebay! Nobody saw the ads, Nobody came over, Nobody got all the parts. If Somebody still needs parts - Contact Nobody, as Nobody said all parts will be available @nowhere.net in the near future at reduced prices so he can make new friends and hopefully while doing so will find a new ruff tuff big biker boyfriend (preferably in the SF bay area) to shack up with before his mommie kicks him out of the house for buying more parts he doesnt really need, but makes him feel like he is gonna be a Somebody, someday.

64. bbop@dblcliickit.com message: need 1947 chief complete tranny and price. also orig. tank emblems fender emblems

63. nightoflight@btinternet.com message: Wanted, good original 101 Scout,1928-1931, un-restored bike preferred, running or not. Must be reasonably complete motocycle. Might do a part deal with my original factory paint 1952 Chief, all original although a little tatty. E-Mail Thom on nightoflight@btinternet.com ..............Thanks for the listing, Thom

62. hogluvr1340@yahoo.com message: Wanted: 3-speed + reverse transmission for 1941-1963 Harley-Davidson Servicar (3-bolt mount, kick start). Would prefer complete unit from kicker to clutch, but will consider all. Reasonable please. Thanks George!!

61. ulfhd@gmx.net message: need any basketcase,ore parts fore harley davidson twin before 1916,also indian singlespeed before1916.thanks ulf

60. morrison@lisco.com message: I recently bought a 1973 aermacchi harley davidson 350 ss, and need to know where I can get a shop manual and parts for it. Thanks for the help. Also, just some more info on the bike would be appreciated.

59. indianbartje@chello.nl message: Hi,Is there anyone out there who can help me ??? I am searching for a manifold for INDIAN POWERPLUS BIGVALVE 1920.
It must have the partnumber H 137 on top and it has to be in good shape.
Hope to hear from you soon .......

58. marshmetz@aol.com message: Complete 90 degree twin cylinder motor or parts for a 1912 Marsh Metz. Also sold under the names Peerless,Arrow, National, Haverford, Dixie Flyer and Imperial. Ken

57. lostmorality@hotmail.com message: Early Sporty frame wanted . Swing arm not needed.

Thanx :)

56. burgular@comcast.net message: Wanted : Harley 4 fin aluminum clamp on cooling ring for mid fifties & up Panhead and early Shovelheads Part # 44109-54 ( The # will be cast on the inside of the ring ) Will pay reasonable market value. Must be able to send detailed closeup photos to the following e-mail address : burgular@comcast.net or call (860) 982-6126 Elmer. Thanx's George!

55. burgular@comcast.net message: WANTED : Guide GLASS RH-55 red tail light lense. Must have guidex script & no cracks or chips, will pay reasonable market value. Must be able to send detailed closeup photos to: burgular@comcast.net or call Elmer at (860) 982-6126

54. burgular@comcast.net message: WANTED : 1971 Super-Glide FX Night Train decals Rear fender decals Part #'s 52126--71 & 52127-71 &52141-71 &52137-71 , front fender decal part # 59208-71 . gas tank decals part #'s 61150-71 top right blue, 61151-71 bottom right red, 61146-71 top left blue, 61147-71 bottom left red, AMF gas tank decals part # 61170-71. Headlight visor super-glide decal part # 67832-71, rear fender super-glide decal part # 59171-71 left, and part # 59172-71 right, ignition switch decal part # 71300-68 e-mail me at : burgular@comcast.net or call Elmer at : (860) 982-6126

53. burgular@comcast.net message: Wanted : 1940 Indian Chief Pyrene fire extinguisher mounting bracket about 12 inches long will pay reasonable market value must be able to send clear pictures to me @ burgular@comcast.net or call Elmer (860)982-6126

52. ingulv.burvald@c2i.net message: For Reading Standard 1170ccm V-twin 1920-22 wanted:Camarms (sitting on gearwheels) for valvelifting, inside twisting mechanism for gas- and ignition regulating (inside handlebar), or sketches of same to understand the principle. Also Corbin-speedometer w/drivingshaft, anglegear and clip-on toothsegments for the spokes.
Any other parts for this type of bike is also of interest.
Thanks George!
Ingulv

51. Tony@acmeaust.com message: Harley-Davidson items needed please.
1) Speedster bars for WL, 1949-1953, 56049-49
2) Ride Control complete 11250-36
3) Big twin solo saddle, no skirt, open seam
4) Big twin seat T 51900-30
5) RH Gas Tank name plate 61773-51
6) LH Gas Tank name plate 61775-51
7) 2 x Name plate strips 61794-51
Please email me if you can help.
Many thanks George.

50. hd36ohv@hotmail.com message: I am in need of a 1938 or 1939 Harley Davidson big twin transmission case. I have a 1937 or 1940 and up to trade or cash works too.

Jerry

49. cc4319@bellsouth.net message: Looking for a 2 bolt style intake for a 1971 servicar.

48. shuvl427@comcast.net message: needed right side gas tank 36/39 over head randy 206 463 2498

47. hd50el@aol.com message: WANTED TO BUY: a set of mufflers for a 1974 Harley-Davidson Sprint SS 350. I need good used or better. Thanks,

John C. Smith

46. ramoto@apollo.lv message: Wanted: All timing gears and rockers for 1924 Indian Big Chief desperately needed to finish restoration. Aluminium exhaust manifold needed for 1929 Indian 4.

45. shovel100@charter.net message:
wanted -- 18" or 19" 400 firestone tires with 80% or better tread
they dont have a name on them but have a cross type tread pattern for the center row of the tread

on page 462 of palmers shows a bike with them on it

also I'm in search of a set or two of 49 up servicar springer handle bars
and a nice rear inline spring fork
I have alot of nos or good used rare parts for trade or good ol' cash

thanx george

44. 33vle@optonline.net message: WANTED : Rear Hub for teens Sears MC. Might be same as the ones on Daytons, DeLuxes... A.K.A. "Musscleman hub" This is early hub for chain bikes, one speed, like Corbin rear.... Let me know if you think you have one....
Am looking for 12 and earlier Harley single motors, projects....

43. rly43@aol.com message: Iam looking for a original gas tank for a 1950 fl harley, or at least the left side.

42. wolfgang.scheerer@iname.com message: Looking for original tank emblems 1947-1950 (Fox).

Thanks George,
Wolfgang

41. tomjr@conveyorsystems.com message: Looking for a project bike to build a bobber.
Harley or indian,
looking for parts or a whole bike.
I would like something from the 40's but anything will work.

40. dkafton@inreach.com message: I am looking for a early Indian hand oil pump. (1913-16?) The one that is soldered to the oil tank. I heard that there are some nice reproductions out there. Can anybody help me out? Any help would be appreciated. Thanks, Dave

39. dl45homepage@telus.net message: looking for an early 1930's DL/RL/Single transmission (no reverse please), preferably complete with no cracks or repairs to the case. Doesn't matter if it needs a rebuild or is already done. Thanks!! Stephen Gilbert, DL45Homepage.com

38. lde47@bellsouth.net message: Want to BUY a SERVICAR FRAME, any year, prefer original, unaltered but will consider others.
Contact: David in Charlotte NC "lde47@bellsouth.net"

37. dexters@rea-alp.com message: Help! Looking for a kicker stud and mounting bracket for a 21' Indian scout. Any information and/or pictures would be greatly appreciated. Thanks!!

36. jcsrestoration@cswebmail.com message: WANTED: 1912 & 1913 HARLEY FENDERS, 1912 REAR HUB(NON CLUTCH MODEL) FOR HARLEY BELT DRIVE SINGLE. 1912-14 HARLEY RIGHT SIDE GAS TANK, 1912-14 HARLEY SINGLE TOOLBOX. LOOKING FOR ORIGINALS, DOES NOT HAVE TO BE ORIGINAL PAINT, ANY CONDITION. EMAIL ME WITH PHOTOS/PRICES, THANKS.
DAVE

35. tipatcarmc@juno.com message: 1959(olny) PANHEAD motor rebuildable or cases with title

34. 48hdbob@onramp.bz message: Wanted for '40 H-D EL; fork rockers, '39-'40 inner primary cover

33. oldmill@rideau.net message: WANTED COMPLETE GUS CARLHEIM ( NEW YORK) ENGINE OR JUST CRANKCASES, ALSO LOOKING FOR ZOLLER SUPERCHARGER

32. chief348@juno.com message: Wanted; wanted to let you know that the seller I mentioned in Ad #29 has contacted me and is offering a refund.

31. jcsrestoration@cswebmail.com message: WANTED:1908-1910 HARLEY SINGLE PARTS, ENGINES, FRAMES, TANKS, FORKS, ANYTHING. I HAVE SOME GOOD EARLY PRE 14' HARLEY PARTS AND GOOD CASH$$$$ FOR TRADE, THANKS GEORGE.
Dave

30. ttmacc@cox-internet.com message: Need TWO Topper scooter or Mustang scooter tires MUST BE NOS or very good . Need --Goodyear All Weather 480/400-12 Diamond pattern My email is ttmacc@cox-internet.com or phone 479 361-2108
Mac

29. chief348@juno.com message: WANTED; I need to know if anyone out there has had a similar experience buying Indian and Harley parts from someone on the East Coast of the US. He currently has numerous ongoing listings and his starting bid price is low. I took a chance and purchased a very expensive Part from him even though his photos leave something to be desired and his description is non existant. I personally know who this person is as I see him at AMC Meets. Even though he knows who I am he will not answer my e-mails or return my phone calls. The part I purchased is basically useless as it has a hole in it that you can see daylight through. I need to know if anyone has had a similar experience with this individual. I see by his Feedback and by the Feedback he has left others I am not the only one. We all know that a reputable seller will stand by his product and contact the buyer to resolve all issues. I believe when someone misrepresents something and takes the money and runs it is Internet Fraud. This person KNOWS me and ripped me off. What will he do to you? Do your homework before bidding. Anyone out there who has had the same experience please contact me. I am beginning to file complaints against this individual. I will be contactiong State and Local Police Departments along with the US Postal Service and the FBI. Any help from anyone in the AMC who can tell me if this person is an AMC Member and what can be done about it through the AMC will be appreciated also. If this seller contacts me and trys to resolve this issue I will gladly let everyone here know that he did. 9-10-04

28. finn@harley-davidson.dk message: Hi There

I´m looking after a headlight/taillight and a batterybox for my Harley 1919 model L,if you can help in any way I´ll be thanksfull.

Best regards

Finn Hansen
Denmark

27. lesliewhit@aol.com message: Wanted 39 big twin harley frame call 478-256-4254

26. shovel100@charter.net message: does anybody out there have fox grips telephone #
i thought he would be at davenport but i never saw him there

25. alfaman8c@aol.com message: 101 Scout chain guard. Must be original please.

24. beton-pro@t-online.de message: Wanted: Harley JD 1928 crank cases 74" 1200,(left+right) in good usable condition. Will trade with D Modell Cases compleate with crank, or
HD Single 500 ccm Engine Parts.
Thanks George, and all Harley intusiasts !

23. carrasas@voyager.net message: Wanted "Basket case" or in need of restoration "CURTIS MOTORCYCLE"
Would like it to be fairly complete but would look at one that is not
Serious buyer
Thanks,
Steve Carrasas

22. marshmetz@aol.com message: Can anyone direct me to where I can get a flat solid steel 51 tooth sprocket. This is for a custom project and the sprocket must be flat and for 530 chain. Mounting holes dont matter as long as there are no other holes, to lighten, etc. Ken

21. '48hdbob@onramp.bz message: Wanted: '31-early'42 Big Twin fork rockers. Have mint '30 only Big Twin fork rockers or '42-up Big Twin fork rockers for trade.

20. carlcycle@nrctv.com message: I am willing to pay an unreasonable amount of money for an Edison Splitdorf magneto for a harley Davidson WR. Please help me out. I also have a lot of parts to trade if you prefer that route. Matt Olsen

19. burgular@comcast.net message: WANTED : Guide GLASS RH-55 red tail light lense. Must have guidex script & no cracks or chips, will pay reasonable market value. Must be able to send detailed closeup photos to: burgular@comcast.net or call Elmer at (860) 982-6126

18. burgular@comcast.net message: WANTED : 1971 Super-Glide FX Night Train decals Rear fender decals Part #'s 52126--71 & 52127-71 &52141-71 &52137-71 , front fender decal part # 59208-71 . gas tank decals part #'s 61150-71 top right blue, 61151-71 bottom right red, 61146-71 top left blue, 61147-71 bottom left red, AMF gas tank decals part # 61170-71. Headlight visor super-glide decal part # 67832-71, rear fender super-glide decal part # 59171-71 left, and part # 59172-71 right, ignition switch decal part # 71300-68 e-mail me at : burgular@comcast.net or call Elmer at : (860) 982-6126

17. burgular@comcast.net message: Wanted : 1940 Indian Chief Pyrene fire extinguisher mounting bracket about 12 inches long wil pay reasonable market value must be able to send clear picturesto me @ burgular@comcast.net or call Elmer (860)982-6126

16. bbflh1340@hotmail.com message: wanted for trade decent panhead or shovelhead in good running condition prefer rigid frame , will trade a 1992 fxd with dual disc wideglide runs great looks good, everyday rider located in newjersey can email pics if interested

15. johnkane@thegranitekitchen.co.uk message: could the guy advertising the bike collection as bluedog5@coxnet.com
please contact me at johnkane@thegranitekitchen.co.uk - your email address does not work! thanks

14. shovel100@charter.net message: i'm in search of 18" and 19" firestone tires that have racing embossed in the sides

i can use 10 of them

13. jamesx@ix.netcom.com message: Wanted Indian 841 Engine/Transmission and or Parts.

12. silverfoxx9@hotmail.com message: I need a original leather belt for a old harley jacket plain 2" wide at least a 40" Prefer 42" HELPPPPPP TY

11. pigstye13@aol.com message: Does anyone know how to get in touch with the owner of this website. I click the links to mail him and it comes back undelieverable. Here is the link to the website. He offers Harley Paint
http://www.gis.net/~schmoo/

10. shovel100@charter.net message:

wanted will pay above fair market price

46 mangled / destroyed springer handle bars to rob the center casting from and / or very nice 49 up servicar handle bars

9. shovel100@charter.net message:

if you dont already know this ones a scam listed below

64. robert_enterprise@yahoo.com message: Dear Seller,

I've seen your capability to received engines order.
I interested to buy : S&S 107" Polished Driveline Package.
You can give me the total prices include shipping cost.
Please advise me soon if you can ship to Indonesia using UPS Express and accept credit card payment directly.

Regards,

Robert

8. DANPATCH@PLANETKC.COM message: DAN PATCH 913 268 5314 46 KNUCLE CASES TRADE FOR 41 KNUCLE CASES

7. DANPATCH@PLANETKC.COM message: WOULD LIKE TO TRADE 46 KNUCKLE CASE FOR A SET OF 41 KNUCKLE CASES WILL PAY DIFFERNENCE 46 CASES HAVE MATCHING BELLY NUMBERS AND TITLE IN MY NAME

6. johnkane@thegranitekitchen.co.uk message: WANTED - HARLEY , INDIAN IN FACT ANY ANTIQUE V TWIN OR FOUR MOTORCYLES CONDITION UNIMPORTANT -COMPLETE ,OR NOT .BARN FINDS, BASKET CASES, ANYTHING CONSIDERED. 1920s to 1965. email me description and pictures if you have them to johnkane@thegranitekitchen.co.uk
THANKS FOR THE BEST SITE ON THE NET GEORGE!

5. bpk@valley.net message: Excelsior, 1917, need an original rear wheel, rusty okay, but needs to be usable for an original machine. Also primary cover, kicker cover and rear chain guard.. Indian model "O", 1917, need front exhaust pipe, rear wheel stand and dixie mag points cover- - Thanks,Geo, BPK!!!!!!

4. boilermaker99@adelphia.net message: 1948-1957 pan parts looking for fl drive train

3. jcsrestoration@cswebmail.com message: WANTED: 1910-1915 HARLEY PROJECTS, SINGLES OR TWINS, ANY CONDITION, BASKETCASES, AND ENGINES, TANKS, FRAMES, EMAIL ME WITH WHAT YOU HAVE, OR CALL ME AT (920)773-3213, THANKS GEORGE.
DAVE

2. carl.d@mobilixnet.dk message: Ner A Car, i want to buy a Ner A Car, and all parts for this motorcycle.
Also interested in contact to Ner A Car owner.

1. les2810@msn.com message: I need a clutch hub for a 1983 Surgis special HD.

August 2004

64. robert_enterprise@yahoo.com message: Dear Seller,

I've seen your capability to received engines order.
I interested to buy : S&S 107" Polished Driveline Package.
You can give me the total prices include shipping cost.
Please advise me soon if you can ship to Indonesia using UPS Express and accept credit card payment directly.

Regards,

Robert

63. ebrown@mag-net.com message: Could the guy calling himself mainmerchantintl1@yahoo.com in ad # 69 of the for sale section please contact me regarding the 12 motor and 14 basket case. Your email address won't work for me. Thanks...Eldon

62. cc4319@bellsouth.net message: Wanted 1942 North Carolina License Plate.Thanks

61. thevetteshop@aol.com message: Wanted: 1927 New York cycle plate, I have a 1936 New York plate to trade. Thanks

60. tubesnbikes@hotmail.com message: Need a big twin trike frame,NOT butchered.Will pay no more than $500.

59. stevwells8063@cs.com message: can anyone help me find parts for a 1942XA,runs great need to find some exhaust pipe from the heads to mufflers and crosover.also like to find first aid kit. thanks

58. sve@tds.net message: SIDECAR FRAME wanted '36 to 79 frame 36 - 66 springs s bar any other parts? locatedin south central pa. thanks

57. jamesx@ix.netcom.com message: Wanted KR Intake Manifold H-D P/N 27045-69R Please Email me if you have one for sale.

56. burgular@comcast.net message: WANTED : 1971 Super-Glide FX Night Train decals, Headlight visor super-glide decal part # 67832-71, rear fender super-glide decal part # 59171-71 left, and part # 59172-71 right, ignition switch decal part # 71300-68 e-mail me at : burgular@comcast.net or call Elmer at : (860) 982-6126

55. burgular@comcast.net message: WANTED : Guide GLASS RH-55 red tail light lense. Must have guidex script & no cracks or chips, will pay reasonable market value. Must be able to send detailed closeup photos to: burgular@comcast.net or call Elmer at (860) 982-6126

54. cc4319@bellsouth.net message: Looking for a set of rear hub caps for a 1973 servicar. Thanks Jonathan

53. jcsrestoration@cswebmail.com message: WANTED: I NEED A 1913 HARLEY REAR HUB(FOR TWIN MODEL), 1912-1914 HARLEY TANKS(FOR TWINS), 1912-1914 HARLEY FRAME(FOR TWIN), EMAIL ME WITH PHOTOS AND PRICES, WILL TAKE IN ANY CONDITION, ALSO NEED A BOSCH ZEV 45 DEGREE MAGNETO, AND MAY CONSIDER SOME REPRODUCTION PIECES IF PRICE IS RIGHT, THANKS GEORGE
DAVE

52. kigy@centurytel.net message: WANTED; SERVICAR LEG SHIELDS - MUD SHIELDS FOR 1969 SERVICAR,ALSO FRONT WHEEL POLICE SIREN,thanks

51. weyland@varangiankindred.org message: Looking for Generator Shovel cases.
Want 68's but will look at others.
Blown up is okay.

Thanks,

Weyland

50. oldmtrcyc@msn.com message: I have about 50 carbide and acetylene lights for motorcycles from 1900 to 1915. If you are looking for something in particular, I may have it. Also selling the following:
1907/8 Indian Hendee carb with intake $2500;
1915/16 Harley motor complete but crusty $2000;
1915/16 Harley motor, nice, needs small pieces, $3000;
1913/14 HD left tank (single), $400;
1913? Shaw motobike, magneto model, needs resto, $3800;
1903 Steffey motobike project, $2500 with literature;
1915? Shaw motor, battery ignition, $800

49. crossbone2110@aol.com message: Looking for HD Big Twin Flattie parts 41-46. Any and all parts. I'm restoring a 1944 U. Civilian...Need M51 linkert, Tanks, fenders, healight, Tail-light, ETC...ETC.. Any technicle expertise would gladly be accepted. Thanks for the help fellas...Len

48. jcsrestoration@cswebmail.com message: WANTED:BUYING ANY OR ALL PARTS FOR 1912 HARLEY TWINS. EMAIL ME IF YOU HAVE A FRAME,TANK, ENGINE OR ENGINE PARTS, FENDERS, HANDLEBARS, HUBS, RIMS, ETC. SEND PHOTOS AND PRICES, CAN BE IN ANY CONDITION, THANKS GEORGE.
DAVE

47. kigy@centurytel.net message: WANTED; SERVICAR PARTS, LOOKING FOR POLICE SIREN FOR FRONT FENDER,ALSO MUD SKIRTS FOR CRASH BARS, MD1 CARB AND MANIFOLD,1969 SERVICAR PARTS,thanks

46. pigstye13@aol.com message: WANTED:::: NOS (New OLD Stock) Only. I need any of the following 45 steering damper parts (preferably still in the cosmoline and Military package.) I know I can buy all the stuff repop from Tiawan Tedd's ,but I am building an AMERICAN bike,not a Kia.

46777-30 release spring
46775-30 adjusting washer
46746-30 adjusting nut
46779-30 sterring damper bakelite washer
46755-36 steering damper lever
46758-37 steering damper screw

Have MANY NOS Harley parts to trade or cash.....Mutt
(903) 873-6644

45. slovewell2@aol.com message: !BEWARE!

they guy who ripped off a bunch off people is back on e-bay as "JJCYCLELLC"
this guy is a crook- he ripped a bunch of people off when he was member "ULH80" and had a business in las vegas "hardcore choppers" alias albert knorr, tarolyn martin, etc. now he's back, he was "selling" knuckle cases to several people and just took the $$ and split, i've e-mailed him several times but no response now that he knows who I am. there are people looking for him, as long as people keep dealing with him the more he can rip people off,
if you could please hand down any information about him he sends you would be appreciated, where he wants payments sent, etc.
if you look at his new profile it's all fake:
business name
phone number
no address
e-bay of course won't do anything cause they don't care. member "sct2002"
email: slovewell2@aol.com
thanks for any help

44. ebuyou@dm-tech.net message: Need a genuine Harley-Davidson control coil (outer only because I already have the inner wire) for the spark advance on a 1956 FL. Aftermarket junk need not apply. Thanks George! (submitted August 23, 2004).

43. pops@classiccycles.com message: WANTED: Battery for 1954 HD FL Police bike. Needs to be 6-volt, 51amp, "police escort" battery. Email pops@classiccycles if you have one or know where one can be located. Thanks!

42. rhandbh@netscape.net message: 1952 speedo, handlebar grips(white), kicker pedal

41. oldmackfan@hotmail.com message: LOOKING FOR REAR MOUNT SIREN FOR A 1965 FL POLICE SPECIAL. PLEASE E-MAIL ME AT OLDMACKFAN@HOTMAIL.COM THANKS. DAN

40. fatdog1903@yahoo.com message: Looking for NOS sprocket shaft for Harley 45. I have lots to trade or cash also. Thanks FatDog

39. valron@atlanticbb.net message: WANTED; MATCH SET OF '46 FL KNUCKLE ENGINE CASES, WITH GOOD NUMBERS AT A FAIR PRICE. LEFT SIDE ONLY WILL DO. PLEASE E-MAIL OR CALL AT 1-814-749-8070 IN DAYTIME E.S.T. ANY HELP WOULD BE APPRECIATED. THANKS, RON.

38. ulfhd@gmx.net message: i need fore a 1915 hd electric bike a rear light,clutch pedal and clutchhand lever,i have something to trade ore cash money.thanks ulf

37. bpk@valley.net message: Wanted: Indian 1917 Model O parts-rear stand, front cylinder exhaust header pipe, muffler, dixie mag points cover,handlebar grips.. Thanks, BPK!!!!!! 603-298-5799

36. shovel100@charter.net message:

I want to trade a mint condition set of 41-46 set of wr gas tanks for a set of 47-50 wr tanks if someone has some 47-50 they are using out there
also i'll buy any and every wr part you have for a few of them i'm workin on

parts or complete bikes

35. carl.d@mobilixnet.dk message: Ner a car motorcycle or parts for this.

34. fredrik.lange@swipnet.se message: HD BT OHV 1937-up air horn. Complete Indian Chief motor and tranny setup. Any year. Magneto for Indian Chief.

33. pigstye13@aol.com message: Hello Folks.I just listed some really RARE Panhead WR Hummer 45 parts on ebay.You might want to take a look. Ends Friday and Sunday August 22 24. Here is the link.

http://cgi6.ebay.com/ws/eBayISAPI.dll?ViewSellersOtherItems&userid=thepigstye&include=0&since=-1&sort=3&rows=50

32. burgular@comcast.net message: WANTED : 1971 Super-Glide FX Night Train decals, Headlight visor super-glide decal part # 67832-71, rear fender super-glide decal part # 59171-71 left, and part # 59172-71 right, ignition switch decal part # 71300-68 e-mail me at : burgular@comcast.net or call Elmer at : (860) 982-6126

31. burgular@comcast.net message: Wanted : Harley 4 fin aluminum clamp on cooling ring for mid fifties & up Panhead and early Shovelheads Part # 44109-54 ( The # will be cast on the inside of the ring ) Will pay reasonable market value. Must be able to send detailed closeup photos to the following e-mail address : burgular@comcast.net or call (860) 982-6126 Elmer. Thanx's George!

30. burgular@comcast.net message: WANTED : Guide GLASS RH-55 red tail light lense. Must have guidex script & no cracks or chips, will pay reasonable market value. Must be able to send detailed closeup photos to: burgular@comcast.net or call Elmer at (860) 982-6126

29. jcsrestoration@cswebmail.com message: WANTED: Looking to purchase 1907-1913 Harley projects or parts, engines, chassis, tanks, etc. Also looking for early Iver Johnson project, email me with photos and prices, thanks George.

28. mot54@aol.com message: WANTED!!TOP DOLLAR PAID FOR 1936 MONTANA LICENSE PLATE,32-39 CHIEF/SCOUT TOOLBOX MUST BE RED ORIGINAL PAINT,34-39 ORIGINAL PAINT GENERATOR BELT GUARD BLACK OR RED.PLEASE HELP!..(406)434-2005

27. xprogramx@hotmail.com message: BOBBER, finished or project in Northern California...thanks. A good start to a retro '50's-style BOBBER.
Adam
San Jose, CA
408-821-1613

26. valron@atlanticbb.net message: WANTED; CLEAR GLASS GUIDE LENS FOR GUIDE SPOTS. THE SPOT LIGHTS THAT HAVE THE REFLECTOR LENS AND THE BULB INSIDE. I DROPPED ONE AND SHATTERED IT. ANY HELP WOULD BE APPRECIATED. E-MAIL OR PHONE RON AT 1-814-749-8070, DURING WORKING HOURS. THANKS, RON.

25. 48hdbob@onramp.bz message: Wanted; '39-'40 inner primary cover in real decent workable condition

24. jds39knuck@earthlink.net message: 39EL MOTOR PARTS. I NEED A GOOD SET OF FLYWHEELS. MUST BE IN GOOD USABLE CONDITION. ALSO, TAPPET BLOCKS, AND A CAM. I HAVE A 39REAR ROCKER BOX FOR TRADE FOR A FRONT. THANKS, J D

23. duffymt60@aol.com message: Looking for a set of late 48 Indian Chief cases with built in scraper, aluminum oil pump thanks George!

22. townncountryauto@aol.com message: Wanted cam cover for 51 panhead

21. buzz98569@yahoo.com message: Wanted: 1950 Chief engine, CEJ 1001 thru CEJ 1500, NOT POLICE. I have a 1950 Chief rolling chasis and need an engine to complete. Will pay $, trade, or? Have complete 1946 Chief engine with trans.

20. ebuyou@dm-tech.net message: Thanks to all who responded to my previous search for a '56 California license plate.

Now, I'm looking for a 1942 California motorcycle license plate. This plate will be used on a 1942 motorcycle. Thanks! (submitted 9 Aug 04)

19. erik.klingler@web.de message: looking for 1909-1912 hedstrom bigtwin frame. top dollar payed

18. gman2226@msn.com message: please help!anyone having any parts for a 1954 165 hummer, need front/rear fenders,seat, carburator and cover, side stand,key switch,handlebars and assys headlight and mount,fork tube cover,thanks to all,would like nos if possible

17. burgular@comcast.net message: Wanted : Harley 4 fin aluminum clamp on cooling ring for mid fifties & up Panhead and early Shovelheads Part # 44109-54 ( The # will be cast on the inside of the ring ) Will pay reasonable market value. Must be able to send detailed closeup photos to the following e-mail address : burgular@comcast.net or call (860) 982-6126 Elmer. Thanx's George!

16. burgular@comcast.net message: WANTED : Guide GLASS RH-55 red tail light lense. Must have guidex script & no cracks or chipps, will pay reasonable market value. Must be able to send detailed closeup photos to: burgular@comcast.net or call Elmer at (860) 982-6126

15. burgular@comcast.net message: WANTED : 1971 Super-Glide FX Night Train decals, Headlight visor super-glide decal part # 67832-71, rear fender super-glide decal part # 59171-71 left, and part # 59172-71 right, ignition switch decal part # 71300-68 e-mail me at : burgular@comcast.net or call Elmer at : (860) 982-6126

14. pigstye13@aol.com message: Hello folks. I am looking for ANY of the following transmission gears.I will pay your fair market values for any of these gears.
These are racing gears for the 1948 to 1966 Harley- Davidson American made Lightweight models known by most as Hummers.

35051-59R main drive gear (25 teeth)
35720-59R countershaft 3rd gear (20 tooth)
35056-59R mainshaft second (22 teeth)
35691-59R countershaft second (25 teeth)
35051-62R main drive gear (24 teeth)
35720-62R countershaft 3rd (21 tooth)

I am also looking for a few NOS (New Old Stock) Linkert carb
parts. Most of these are flathead parts ,so there should be plenty War surplus parts out ther. No repop parts PLEASE,I can get them from Tedd if I want them..I have other NOS Linkert parts or complete carbs to trade for what I need......................................

I need the following::::::::::::::::::::::::::::::::::::::::::::::::::::

27390-33 float bowl vavle cover cap(s)
27251-24 choke lever screw(s)
27235-29 float bowl nut(s)
27363-41 1 5/16" venturi

Also looking for a EXCELLENT condition Linkert M-18 (1948 to 1958 Servi-Car carb). I need only a BARE body with basically ZERO grooving in the throat of the carb (you can see this by removing the throttle disc and throttle shaft and examining the throat at that area) This wear is caused by loose throttle discs/shafts have worn away the throat.

13. carl.d@mobilixnet.dk message: Henderson K model: gastank.
Thanks George

12. BIGESTUNA@AOL.COM message: JERRY HATFIELD AMERICAN RACER BOOK
SOFT COVER I BELIEVE
HAS YELLOW CYCLONE ON COVER

11. ebrown@mag-net.com message: Wanted for 1928-29 JDH - rear cam gear, lifter blocks and right hand motorcase. Will pay top prices. Thanks...Eldon

10. crossbone2110@aol.com message: Looking for a Big Twin Flathead to RIDE/Restore. U, UL, ULH.
1937-1948. If you have one. I am interested. Must have good vin and most of the original stuff. Please no cut frames...I have a 1942 indian scout to trade or will pay cash or work for food...Whatever you can deal with...Thanks, Lenny
CROSSBONE2110@AOL.COM

9. sammaddy@zoominternet.net message: Indian Powerplus : primary chainguard, rear external brake band, Schebler DLX 21 carb (partial OK), Bosch ZEV mag (42 degree -partial OK). Call Scott, evenings at (610) 932-0580 EST.

8. flathead@freemail.hu message: Wanted : H-D Police motorcycle RCA radio receiver 36~46 ', 36' and 37' Knucklehead engine, BigTwin sidecar parts - TRADE : 1932~36'Indian police motorcycle receiver in NOS painted box, complette all parts (made American-Bosch)

7. oscarhedstrom@hotmail.com message: WANTED: For pre 1905 Indians: Hedstrom spark plugs, corbin/new departure front or rear hub parts, wide wood rims in 40 or 36 hole, original gas or oil caps and any photos of 01-08 Indians.
THANKS to all who help.. Email George in Massachusetts at oscarhedstrom@hotmail.com Date 8/3/04

6. jenningsauntieem@aol.com message: WANTED ONE CIRCUIT BREAKER COVER FOR A BERLING E-21 OR B-21 MAGNETO TO FIT MY 1918 HARLEY MODEL F. THANKS FOR ANY HELP. JOE J.

5. gem4cj@yahoo.com message: Looking for the following parts to finish my basket case racer. 45115-72R Brake hose, 59671-75 splash guard, 65214-75 expansion chamber, 52040-75 seat, 37883-75P clutch hub, 37443-75P spacer, 37892-75P retaining ring, 47508-75 rear fork, 46270-75 side panel left, 61700-75 fuel tank, 29120-75 air filter housing, 16529-75P cylinder, 16715-75P head
I can provide detailed archive pictures of each of the parts.
Thank You, B

4. marksey111@comcast.net message: I am looking to restore an Indian Scout from 1930's or 1940's. I have looked everywhere, but need more eyes!!!

3. oldmtrcyc@aol.com message: Wanted: "Orient" motorcycle headbadge.
oldmtrcyc@aol.com

2. oldmtrcyc@aol.com message: Wanted for '12 or '13 HD twin: need an open magneto and a good rear cylinder. I have an extra front cylinder for trade.

Wanted for '15 HD twin: ZEV magneto, 45 deg CW.

thank you!
oldmtrcyc@aol.com

1. gpardos@ix.netcom.com message: Wanted:1908 or earlier HD

June 2004

189. howiem@bigfoot.com message: Need Carburetor for 1929 Harley JD

188. dehall@adelphia.net message: looking for a servi car frame for a good price.
1936-49

187. cave_dood@yahoo.com message: looking for ...off set springer bars... speedster,,,hollywood?????
thanks,Win

186. stingl.dietz@t-online.de message: Foks,

desperately looking for an original good 1946/47 BigTwin frame

thanks
Klaus

185. trosa54@hotmail.com message: Need two bolt transmission DL,RL,WL, for a early HD frame with 41 WLA engine.

184. pigstye13@aol.com message: Hello . I am seeking the following parts
a NICE undamaged pair of iron heads for 47 to 73 Servicar
one automatic advance timer for 45/XL
one 1966 to 73 Tillotson MD carb for Servicar
one manifold for Tillotson listed above. NO junk please.Thanks for any help.......Mutt (903) 873-6644

183. blndrs@msn.com message: WWII harely davidson any

182. fatdog1903@yahoo.com message: Looking for Harley CAC Speedway racer parts, Especially frame. Thanks FatDog

181. moparwade@sbcglobal.net message: Need seat for 71 XLCH. Looking for a seat that is not a huge fat seat. More of a badlander style. Have pics of the seat that I took off if you would like to see them for referance. Thanks.

180. moparwade@sbcglobal.net message: Looking for forward controls for 71 XLCH Sportster.

179. lindaluise@aol.com message: Looking for Harley Servicar, running condition, some restoration and/or repairs OK. Thanks.

178. deal@beautyofspeed.com message: I have a bunch of parts for trade or sale. Lots of NOS hardware, motor parts [like NOS panhead intake valves and NOS shovelead cylinders], 45 perfomance parts, accessories, BGT transmission case etc... Details, prices and pictures of every part I have to offer can be seen here:

http://www.beautyofspeed.com/stock.htm

I am open to trades also. I'm looking for any and all Harley WR / WLDR parts and Crocker twin parts. I am located in Europe but do international deals all the time so you don't need to worry about that. Thanks George,
Eric

177. lardo1981@yahoo.com message: Goodyear tires 5.00"+16,Ring of fire or spoke cover for springer,Fancy lights,Doodads,Gadgets,NOS or very good condition horn(springer)

176. jenningsauntieem@aol.com message: WANTED ONE USED OR NOS CIRCUIT BREAKER COVER TO FIT A BELING MAGNETO MODEL # B-21 THANKS GEORGE

175. rbn9487@flash.net message: '55-'56 Pan hand shift gas tanks wanted. Email or call 978 764-4923.

174. shovel100@charter.net message:
wanted rear fender for 45" solo models and a wla fender

I've got a set of 41-46 wr tanks id like to trade for a set of 48-52 ones

also i've got a mr3 linkert i'd like to trade for a mr4 linkert

173. pigstye13@aol.com message: WANTED:::: I have a super nice OEM 1947 to 1957 45/Servi-Car rear spring fork leg........I need to swap this leg with someone who has a equal condition 1940 to 1945 rear spring fork leg. If you don;t need this style of leg, I have lots of other parts I could use for trading material and/or restoration work for the part I need. Can anyone help? Thanks (903) 873-6644

172. carl.d@mobilixnet.dk message: Do you have Thor, Reading Standard, Cleveland, or Excelsior parts for sale or trade?
thanks George

171. carl.d@mobilixnet.dk message: Henderson 1918 - 1919 parts: engine and other parts, interested in all for this motorcycle.

170. keeskoster@noknok.nl message: Looking for pre 1910 motorcycles and parts everything worldwide
kees koster
Holland ++31653457493

169. johnm@goulburn.net.au message: Wanted chrome side covers for 1969 FLH.
Any other Dresser parts.
Thanks, George.

168. oldmtrcyc@aol.com message: Wanted: Orient motorcycle head badge.
Thank you!
oldmtrcyc@aol.com

167. fredrik.lange@swipnet.se message: Motor for RL, preferably 1935, but any year considered.

166. trosa54@hotmail.com message: Need 29/30 Harley DL transmission stuff.Cluster/slide etc. What do you have? Tony.

165. kigy@centurytel.net message: WANTED: STOCK DISTRIBUTOR AND CARB FOR 1969 SEVICAR,MUST BE IN GOOD CONDITION, ALSO OIL DIP STICK, PLEASE SEND PICS AND PRICE TO kigy@centurytel.net, THANKS, mike

164. pigstye13@aol.com message: WANTED::: NOS 45" WL/WLA outer primary cover. outta 100000 made,there has GOT to be some still around.Anyone got one for sale? (903)873-6644

163. thenativessunshine@hotmail.com message: WANTED: 1962 Harley Davidson Sprint 250cc left-sided kicker.

162. thenativessunshine@hotmail.com message: WANTED: 1962 Harley Davidson Sprint 250cc left-sided kicker.

161. dexters@rea-alp.com message: I am interested in any 20's Indian chief or scout parts you may have. Fair price offered for good parts. Thanks!

160. CHROMESPOKE@HOTMAIL.COM message: LITITURE WANTED: "THE SUN" MOTOR CYCLE With VILLIERS ENGINE -LITITURE AND PARTS WANTED! Im interested in pre-1928 parts and lit. for "The Sun" motorcycles. Thanks George!

159. pockit@earthlink.net message: I AM LOOKING FOR AN ORIG SIDECAR FOR A 1948 PANHEAD. THANKS FOR THE HELP!

158. gorretaalberto@libero.it message: For my FLH 1972 shovel I need URGENT :
front exhaust pipe for dual exhaust system (with kick starter)

157. mark@linkcycles.com message: Wanted: Harley opposed twin sport model parts. Have other Sport and JD parts to trade or will buy outright. ANY sport model part(s) considered.
Mark Masa

156. trinitymotorworks@pshift.com message: WANTED:
1915 Indian Single head and intake. Have the bottom end of the motor and am in need of the top end. Original or Repro is fine.
Thanks
George

155. ingulv.burvald@borealisgroup.com message: For Reading Standard V-twin 1170 ccm 1922:Valverockers and also the timing gearwheels for rockers/oilpump- and magneto-driving. Internal wirepulling piece inside handlebar for ignition-/and, or gas-regulating.Or sketches of the same.
Also the grips for controlling the high/low ignition and brake.
Or sketches of the same.
Thanks George.

154. Michael.Guthke@constantin-entertainment.de message: I´m looking for an old (not younger than 1949) straightleg frame for a pan head!

Please Phone or send an email to
Michael Guthke
Weißenburgerstr. 37
81667 München/GERMANY
Tel. 0049 - 89 - 44 44 88 305 or 0049 - 163 -62 04 126

153. doublewide60@sbcglobal.net message: Cable drive Smith's (preferred) speedometer and necessary hardware to install, for 1969 XLCH Sportster. Also miscellaneous parts for future use/need. Thanks, Jim

152. fredrik.lange@swipnet.se message: empty star hub with good races 43-57 style.

151. mark71572000@yahoo.com message: wanted pan head engine cases in any condition ? especialy need 55/57 paperwork not important. also need 68 g cases must have bill of sale on g cases

150. tpzz@adelphia.net message: 1949 FL / EL OEM PARTS WANTED

FRONT FENDER
HEAD LIGHT BULB
HUB CAP
LEATHER BAGS W/WESTERN STYLE BUCKLE

THANK YOU

149. mark@linkcycles.com message: Wanted: 1941 Harley Knucklehead FL Number side (LEFT) case.
HELP!!!!!

148. shovel100@charter.net message: will matt olsen give me a email
i want to talk to you about buying a fender we talked about a while back ago

147. sderby5492@aol.com message: need 841 seat tee bottom rear fender have 841 parts to trade or by out right have gas tanks, dash, horse shoe intake manfold

146. sderby5492@aol.com message: need 841 seat tee bottom rear fender have 841 parts to trade or by out right have gas tanks, dash, horse shoe intake manfold

145. jenningsauntieem@aol.com message: HELP I NEED A CIRCUIT BREAKER COVER FOR A BERLING MODEL B-21 MAGNETO ALSO DOES ANYONE HAVE THE BRASS STRIP THAT GOES ON TOP OF THE MAGNETS WITH THE TYPE NUMBER STAMPED IN IT.THANKS FOR ANY HELP JOE J.

144. pigstye13@aol.com message: Wanted:::: one excellent condition WR sprocket shaft (903) 873-6644

143. pigstye13@aol.com message: WANTED:::: Want to buy or trade for any/all of these 45" steering damper parts N.O.S. H-D only NO REPOPS. Need ASAP..............I have quite a few NOS ride control pieces to trade or lots of other NOS stuff

46777-30 release spring
46758-37 steering damper screw
46755-36 WLA steering damper handle
46779-30 damper bakelite washer
46746-30 damper adjusting nut

(903)873-6644

142. kingbiker@verizon.net message: Wanted-1933 Maryland motorcycle license plate.

141. DANPATCH@PLANETKC.COM message: NEED LOW AND HIGH SPEED NEEDLE VALVES FOR A 46 KNUCKLE M35

140. jonathan.curry@pfrd.ocgov.com message: Have an original excellent condition 47 knuck right case and will trade for a 39 knuck right case. I also have a beautiful original late model knucklehead frame that I would trade for a 1939 knuck frame in very good or better condition.

139. pigstye13@aol.com message: Wanted::: HELP !!!!!!!!!!! Need NOS crank pin Harley part # 24251-47. HAve a ton of old HD NOS and good used parts to trade for most models 30's to 50's
(903) 873-6644

138. oldmill@rideau.net message: A GOOD HOME OFFERED FOR A KOOL OLD 2 CAM OR NEAT OHV CONVERSION BOBBER. INDIAN? HARLEY? WHATEVER. PERIOD PIECE ONLY, NO ORANGE COUNTY CHOPPER CRAP, RARE TRADES AND/OR CASH, THANKS GEORGE

137. chromespoke@hotmail.com message: "THE SUN" MOTOR CYCLE With VILLIERS ENGINE -LITITURE AND PARTS WANTED! Im interested in pre-1928 parts and lit. for "The Sun" motorcycles. Thanks George!

136. kmstrade@aol.com message: Please re send if you have sent responses to my requests for 22 HD engine/tranny. I have been having problems with my aol. thanks

135. raclark4@mail.uh.edu message: 1930-36 VL sidecar frame wanted.
Original part #6001-30 ,LT model
Thanks George

134. slovewell2@aol.com message: ---HELP WANTED---
I'M TRYING TO GET IN CONTACT WITH ALBERT KNORR, ALBERT I BOUGHT '44EL KNUCKLE CASES FROM YOU, BUT YOU SENT THE WRONG STUFF PLEASE CONTACT ME. IF ANYBODY KNOWS HOW TO GET IN CONTACT W/ALBERT PLEASE DROP ME A LINE-E-MAIL IS: SLOVEWELL2@AOL.COM

THANKS
SCOTT

133. davemcguire08@yahoo.com message: Wanted 40's military wla or miltary Indian project bike. Running or not and have at least 75% of the bike.

132. burgular@comcast.net message: WANTED : Guide GLASS RH-55 red tail light lense. Must have guidex script not cracked, chipped or scratched. Will pay reasonable market value. Must be able to send detailed closeup photos to: burgular@comcast.net or call Elmer at (860) 982-6126

131. burgular@comcast.net message: Wanted : Harley 4 fin aluminum clamp on cooling ring for mid fifties & up Panhead and early Shovelheads Part # 44109-54 (The # will be cast on the inside of the ring) Will pay reasonable market value. Must be able to send detailed closeup photos to the following e-mail address : burgular@comcast.net or call (860) 982-6126 Elmer. Thanx's George!

130. burgular@comcast.net message: WANTED : 1971 Super-Glide FX Night Train decals Headlight visor super-glide decal part # 67832-71, rear fender super-glide decal part # 59171-71 left, and part # 59172-71 right, ignition switch decal part # 71300-68 e-mail me at : burgular@comcast.net or call Elmer at : (860) 982-6126

129. burgular@comcast.net message: WANTED : NOS Panhead 1963 -1964 -1965 left side tank emblem Part # 61775-63 (L) WILL PAY reasonable market value. I have the right side and need a left. Original Harley only no taiwan or eagle iron junk. I know the difference. Must be able to send close up clear photos of both sides to the following e-mail address : burgular@comcast.net or call Elmer at (860) 982-6126 Thanx's George

128. evostevo2@aol.com message: Need rear wheel and brake setup for a 1937 Indian chief. That would be a rigid frame.
Thanks, Steve

127. coastie40@yahoo.com message: Need some tank shift parts; shift gate for panhead W/REVERSE. Shifting pattern is (from front of tank to rear) R1N23. Lever and related linkage would be handy too if they are in good shape. Also looking for long axle and housing for servicar. Thanks, Bob at or gimme a call (509) 773-6930.

126. trinitymotorworks@pshift.com message: WANTED: Indian Dispatch Tow in any condition. Any Year. Project, Runner, preferably not a full restoration.
Thanks George!

125. dgerulski@vistascape.com message: Wanted one set of foot boards for 1952 Harley FL Hydraglide. These have rivets around the top edges to hold the rubber boards to the metal plates. Condition of the rubber not important. More concerned with condition of the metal.

124. jonathan.curry@pfrd.ocgov.com message: Need a Harley 1939 EL right crank case and a early (39) forged neck for my frame.
Thank you.

123. jerry@digitalpath.net message: hi i have a spring cycle i belive it was maid in 1938 maid by spring and bumper co of los angles need information on this bike it has a larson moter on it with 20" bike tires belt driven the fram is maid with leaf springs step throu fram thank help

122. weyland@bellsouth.net message: LOOKING FOR 1968 SHOVELHEAD CASES, CASE HALVES, OR BASKET MOTOR. HAVE EVERYTHING ELSE TO BUILD A MOTOR, BUT WANT 1968 CASES.

Thanks.

121. valron@atlanticbb.net message: WANTED; NEED TO FIND THE ADDRESS OR PHONE# OF CURT WHO USED TO STRAIGHTEN HARLEY FRAMES. I BELIEVE HE WAS FROM THE PITTSBURGH, PA. AREA. I NEED A 45 SOLO FRAME CHECKED BEFORE I PAINT IT. DO YOU KNOW OF ANY OTHER REPUTABLE FRAME STRAIGHTENERS IN WESTERN PA. REGION? ANY HELP WOULD BE PPRECIATED. E-MAIL OR PHONE 1-814-322-4003. THANKS, RON.

120. valron@atlanticbb.net message: WANTED; LOOKIN' FOR THE TOP SECTION OF A RIGID PAN OR KNUCKLE FRAME, FROM THE TOP MOTOR MOUNT BACK TO THE SEAT POST TUBE. ANY HELP WOULD BE APPRECIATED. PRIVATE OWNER TRYING TO UNCHOP THIS OLD RIGID FRAME. E-MAIL WITH ANY HELP OR LEADS, OR PHONE 1-814-322-4003. THANKS, RON.

119. corelord@iw.net message: Wanted good pair of J inlet housings - with or without valves,springs,coller and keepers.
658-15 oil pump gear stud wasdher
set of 61 flywheels
set of late JD connecting rods

Would like to talk to anyone that knows about J/F/JD/FD motors

Thanks

118. W3ECU@NETSCAPE.NET message: CUSHMAN WANTED. LOOKING FOR THE FOLLOWING FOR A 1963 CUSHMAN TRUCKSTER
SERIES 781, MODEL 880003:
STEERING WHEEL
FRONT END PARTS
OWNERS/PARTS/SERVICE MANUALS

117. W3ECU@NETSCAPE.NET message: WANTED SIDE CAR AND/OR PACKAGE BOX FOR 1960,63'64' HARLEY TOPPER SCOOTER
MODEL "A" OR "AH". ANY CONDITION.LOCATED IN BALTIMORE,MARYLAND.

116. hulagun@hotmail.com message: WANTED: H-D K, KR, KRM, KH, KHK, KHR, KHRM model project, rolling, basket or complete. Also might be into a postwar WR or Scout with footshift, or older dry clutch iron head Sportster 'racer'. Not interested in expensive trailer queens, looking for something I can ride or build to ride.

115. oldmtrcyc@aol.com message: Wanted for '12 HD twin: need an open magneto and a good rear cylinder. Have an extra front cylinder for trade.

Wanted for '15 HD twin: ZEV magneto, 45 deg CW.
oldmtrcyc@aol.com

114. ebuyou@dm-tech.net message: I'm looking for a 1956 California motorcycle license plate for my dad's restored Panhead. This plate would really be cool. My dad turned 75 this year. Thanks for looking through your license plate stash and thank you, George, for letting me post this message. (submitted July 8, 2004).

113. one_tall_cool_1@hotmail.com message: WANTED: Bee hive oil bag, bee hive tail lamp. Bee hive gas tank?? New or slightly used knucklehead engine; can be RevTech or Accurate Engineering; would prefer something larger than a 74". Indian or other manufacturer leaf spring front end in good condition.

112. ddhowsmon@hotmail.com message: Need set of usable saddlebags with mounts for 47 indian, black with white fringe. Thanks George

111. mydog7@canby.com message: Looking for panhead project bike. I want it to be a fairly complete scooter including engine, tranny, primary and frame. A stock or custom is fine. It must have a HD title with matching numbers...this is a must! Have cash. E-mail at mydog7@canby.com or m.johnston@detemple.com Ride Safe!

110. ingulv.burvald@c2i.net message: For Reading Standard V-twin 1170 ccm 1922:Valverockers and also the timing gearwheels for rockers/oilpump- and magneto-driving. Internal wirepulling piece inside handlebar for ignition-/and, or gas-regulating.Or sketches of the same.
Thanks George.

109. chromespoke@hotmail.com message: SUN motor cycle lititure wanted! I am interested in any early (pre-1920) SUN motorcycle lititure. These used a 2-stroke VILLIERS engine. Thanks to all, especially GEORGE!

108. ulfhd@gmx.net message: wanted parts fore 1915 hd twin.clutchlever fore hand and foot,rear hubore any parts what you have.thanks

107. drbader@morelove.com message: very interested in purchasing restored 40's knucklehead,48 through 57 panhead. Motivated cash buyer. Please contact with pics and tel # via E- Mail. 203/445-9569 Fred.

106. gwen.graeme@xtra.co.nz message: Wanted KJ Henderson Flywheel and oil pump please. Thanks George.

105. shovel100@charter.net message:
Please follow the link below to view and help recover these bikes for this man. Maybe one of you can help put the idiots behind bars who stole them and put a smile back on the face of the man who owns them. On the 23rd or 24th of this month, he had 4 very valuable motorcycles stolen. There is a 10,000.00 euro reward, about $12,000.00 dollars for their return. Two of the bikes have a very personal tie with the owner

http://www.oit-harley-davidson.com/gestolen.htm

thanx a ton george

104. burgular@comcast.net message: WANTED : 1971 Super-Glide FX Night Train decals, Headlight visor super-glide decal part # 67832-71, rear fender super-glide decal part # 59171-71 left, and part # 59172-71 right, ignition switch decal part # 71300-68 e-mail me at : burgular@comcast.net or call Elmer at : (860) 982-6126

103. burgular@comcast.net message: WANTED : NOS Panhead 1963 -1964 -1965 left side tank emblem Part # 61775-63 (L) WILL PAY reasonable market value. I have the right side and need a left. Original Harley only no taiwan or eagle iron junk. I know the difference. Must be able to send close up clear photos of both sides to the following e-mail address : burgular@comcast.net or call Elmer at (860) 982-6126 Thanx's George

102. burgular@comcast.net message: WANTED : Guide GLASS RH-55 red tail light lense. Must have guidex script not cracked chipped, will pay reasonable market value. Must be able to send detailed closeup photos to: burgular@comcast.net or call Elmer at (860) 982-6126

101. burgular@comcast.net message: Wanted : Harley 4 fin aluminum clamp on cooling ring for mid fifties & up Panhead and early Shovelheads Part # 44109-54 ( The # will be cast on the inside of the ring) Will pay reasonable market value. Must be able to send detailed closeup photos to the following e-mail address : burgular@comcast.net or call (860) 982-6126 Elmer. Thanx's George!

100. shovel100@charter.net message:

I just listed a bunch of tools on ebay many nos and many from the Teens
heres a link or look under harley tool
they end on the 11th of july
http://stores.ebay.com/100INCHSCOOTS-VINTAGE-SALES_W0QQsspagenameZL2QQtZkm

99. mayfields50@yahoo.com message: Wonted - Fairbanks/morris magneto for 1952 panhead .

98. mrkevvzime@cs.com message: WANTED ORIGINAL PARTS FOR 1942 H-D WLC (Canadian Army model)

- Original operator’s, maintenance, parts manuals for WLC
- 11235-41N complete tandem seat assy. (an early type)
- 4901-41 complete head light (Cycle-Ray)
- 4901-41N complete front marker light including bracket (an early type)
- 11331-32A complete Jiffy stand (kick stand)
- 5058-41 Bulb repair kit
- 11905-X Exhaust pin wrench 7/16 & 3/8
- 11906-X Exhaust pin wrench 7/16 & 3/16
- 11551-X Pouch for tire tools/irons
- 11574-X Friction tape (4 ounce roll)
- 11974-37 Thickness gauge
- 12650-29 Cylinder base nut wrench

PLS email me at mrkevvzime@cs.com call (216)496-7550 and ask for Prem. THANKS GEORGE!!

97. weyland@bellsouth.net message: LOOKING FOR 1968 SHOVELHEAD CASES, CASE HALF, OR BASKET MOTOR.

THANKS~!

96. moparwade@sbcglobal.net message: Looking for speedo for 71 XLCH. If you need pics I have them and can send. Mileage not as important as condition. Original speedo went up to 140mph. Thanks.

95. ebuyou@dm-tech.net message: I'm looking for a headlight molding (door) for a 1947 Harley Hummer ST 125. I think the part number is 67712-47. It can be new or used. It can be chrome or painted. Heck, some scratches are okay too. Just as long as it works! Thanks for looking through your "stash" and thank you, George, for letting me post this request. (submitted June 30, 2004)

94. pigstye13@aol.com message: WANTED::::Please check you NOS parts stashes.I need a 22 tooth mainshaft second gear Harley part # 35056-59R. I am also looking for a 21 tooth countershaft 3rd gear. I have pictures of both I can email.These gears are for the 48-66 Lightweight models Hummer,165 125 etc.Will pay $75 for either or trade any NOS part(s) I have on hand.Thanks. (903) 873-6644

93. dlutman@weckclosure.com message: Howdy all,
I'm looking for a right side footboar mounting bracket, part number 75503 for a 1940 Indian 640B Scout. Can anyone help?
Thanks, and thanks George!
Denis

92. ironwigwam2@aol.com message: Wanted, Indian Brave, Any Foot pegs or rubber covers for the same. These are the English type footpeg that has The Indian Script on them.

91. penngrove@sonic.net message: WANTED: NOS GOODYEAR SUPER EAGLE 100 WIDE WHITEWALL TIRES - 5:00X16" WILL PAY $3,000 FOR PAIR - MUST BE IN MINT CONDITION - NOS KICKER COVER FOR 1959 FLH, NOS CHROME HEADLIGHT, PAIR OF NOS FLH HEADS FOR '59, NOS NEUTRAL LIGHT SWITCH WIRE - #71156-47 - NOS GENERATOR LIGHT SOCKET WIRE - #71158-47 ALL PARTS MUST BE GENUINE HARLEY-DAVIDSON! JOHN KING 707-763-7023

90. buana55@hotmail.com message: Wanted: Police radio boxes with cradle in the 30's or 40's era for Indion Motorcycle. Also looking for police spotlamps for 50 chief. Looking for people who dealt with Larry Struck from Groveland, Ca.

89. rogerorton@sbcglobal.net message: Wanted for a 1915 Excelsior Twin. Engine Oil Pump, Exhaust pipes and muffler, Primary cover, V shaped shifter gate on side of Tank, and tool box.

Wanted Cylinders for a 1912, 1914, and 1915 Harley-Davidsin Twin'
e-mail at=bove oc call 916-362-3772 ask for Roger

88. oldironaddict@aol.com message: Wanted...`46FL project bike.Does not need to be a runner,or complete.Would also consider buying just a complete `46FL motor.Would prefer a mid, to late bike with bullneck frame and offset frt. end. Tommy 714-447-9564 Thanks.

87. desertmoon@starband.net message: Swing arm for Panhead/ shovelhead 1963 - 72 for restoration. Straight and not polished. Also Panhead oil pump for 1958 FLH, body or complete. M74 B carb complete. Jim 760-364-2397

86. kmstrade@aol.com message: wanted 22 HD J tranny and engine.

thanks

85. RROBERT60@HOTMAIL.COM message: WANTED REAR FEANDER FOR 1955 PANHEAD RIGID FRAME

84. pigstye13@aol.com message: For sale on eBay One set of Harley ServiCar rear disc wheels 1951 to 1972::::::: Ends Friday July 2nd eBay Item number: 2253380923 Don't miss 'em

83. owlo@death64.freeserve.co.uk message: WANTED after becoming ebay victim to a David Howarth-Australia- DO NOT DEAL WITH THIS GUY, takes your money and does not deliver!!!!
1915 Gearbox for Model 11. Any condition, limited resources, Grateful of any parts or help,
Owen.

82. moparwade@sbcglobal.net message: WANTED, CYLINDER HEADS FOR 71 XLCH SPORTSTER IRONHEAD 900cc. Prefer heads that have been updated to run unleaded gas, but if thats not available then heads in good condition will work. Do not want to have to work on them, already have a set but they need work. Any suggestions would be greatly appreciated.

81. Joe58Duoglide@aol.com message: Wanted... Brake Drum cooling ring and NOS Eaton Gas Caps
for 1958 Panhead. CAS$$$$H Paid

80. Joe58Duoglide@aol.com message: 1958 FLH DuoGlide Police Special $$$ TOP DOLLAR $$$
Paid for N.O.S. or OEM Parts...email me with part & price......

79. longyard@ix.netcom.com message: Looking for a girder front end at a reasonable price. Will be painted, not chromed, so one with bad chrome is okay. Cash, no bs.

78. sancholtd@msn.com message: lookin for a 5 spd. tranny for an '82 fxr electric start. in a bind...need to ride

77. singledownloop@hotmail.com message: on the early sportster clutch basket "1954-1970 as i'm sure you know " i need the little pieces,i don't know the techy name for them but they are riveted inside the basket and the clutchs slide in and out on them.I'd like to get the pieces plus the rivits if you have them.I can make them and buy rivits but ready made will make my life easier.If you would let me know,if you can't help can you point me in the right direction?Also would take a junk clutch basket with these parts that are still good on them........ Thanks.....................Greg

76. oldspeed53@yahoo.com message: Wanted solo seat T for 48 Chief will pay fair price 607-783-2387 ask for Jon

75. erlebik@aol.com message: I would like to dispute BIGESTUNA@AOL.COM claim that I am a scam artist. First, I have NEVER ripped anyone off. I wasted a little of his time by pulling his chain because he wasted a bunch of other people's time offering a motor for sale and then waffling to get more money. He is all about greed.
Cheers!

74. oldspeed53@yahoo.com message: Indian Chief girder front shock in working condition will pay your price Phone 607-783-2387 or e mail Thanks Jon

73. Fasthdbill@aol.com message: Looking for 39 to 41 HD bigtwin tail light, I have one for a Servi Car outright sale or mine is available for trade. Thanks GEORGE!!

72. pete@614engineering.com message: Excelsior kickstarter gear. I need measurements of the gear, with the ratchet teeth on the side of it. A local gear company will be reproducing these for me, but I need the dimensions of the gear. Contact me if you would like to buy a gear. Whomever can supply me the dimesnions gets a new gear at my cost.

thanks!
pete

71. chromespoke@hotmail.com message: 1920-1921 SUN MOTOR CYCLE parts and lititure wanted.

70. VMARSHMAN@AOL.COM message: 34-36 45" RLD, ANY PARTS & INFORMATION ON THE OILING SYSTEM

69. weyland@varangiankindred.org message: LOOKING FOR 1968 SHOVEL CASES, CASE, BOTTOM END, OR MOTOR.

THANKS.

WYELAND

68. Harley42FL@aol.com message: I'm looking for a crystal jewel for the back of a 1939 Deluxe seat. They are usually a floral design but I have been told that there were other designs. I also need hard plastic black hand grips for a war years bike. Also in need of a plastic kick pedal for a 1946 knuckle. Thanks for any help and thank you George

67. burgular@comcast.net message: WANTED : 1971 Super-Glide FX Night Train decals Headlight visor super-glide decal part # 67832-71, rear fender super-glide decal part # 59171-71 left, and part # 59172-71 right, ignition switch decal part # 71300-68 e-mail me at burgular@comcast.net or call Elmer at (860) 982-6126

66. burgular@comcast.net message: WANTED : NOS Panhead 1963 -1964 -1965 left side tank emblem Part # 61775-63 (L) WILL PAY reasonable market value. I have the right side and need a left. Original Harley only no taiwan or eagle iron junk. I know the difference. Must be able to send close up clear photos of both sides to the following e-mail address : burgular@comcast.net or call Elmer at (860) 982-6126 Thanx's George

65. burgular@comcast.net message: WANTED : Guide GLASS RH-55 red tail light lense. Must have guidex script not cracked chipped, will pay reasonable market value. Must be able to send detailed closeup photos to: burgular@comcast.net or call Elmer at (860) 982-6126

64. burgular@comcast.net message: Wanted : Harley 4 fin aluminum clamp on cooling ring for mid fifties & up Panhead and early Shovelheads Part # 44109-54 ( The # will be cast on the inside of the ring) Will pay reasonable market value. Must be able to send detailed closeup photos to the following e-mail address : burgular@comcast.net or call (860) 982-6126 Elmer. Thanx's George!

63. burgular@comcast.net message: Wanted : Harley 4 fin aluminum clamp on cooling ring for mid fifties & up Panhead and early Shovelheads Part # 44109-54 ( The # will be cast on the inside of the ring) Will pay reasonable market value. Must be able to send detailed closeup photos to the following e-mail address : burgular@comcast.net or call (860) 982-6126 Elmer. Thanx's George!

62. hawk61587@prodigy.net message: WANTED: 1955 - 1957 Stock footshift Panhead All bikes considered.

61. gmes6704@charter.net message: PLEASE HELP!... I AM LOOKING FOR A 1937 WLD OR WL ENGINE OR GOOD CASES. I HAVE A 1937 ROLLING CHASIS AND WOULD LIKE TO MAKE THIS BIKE COMPLETE. ANY HELP WOULD BE VERY MUCH APPRECIATED. THANK YOU, GORDON

60. dmk441@yahoo.com message: WANTED:Buying Prewar Balloon tire bicycles(1933-1941)(Schwinn,shelby,dayton,elgin) & original paint whizzer projects. Please email me at dmk441@yahoo.com with pictures and prices, thanks.
Dave

59. jpaponne@yahoo.com.ar message: WANTED !!! original or reproduction parts for Harley Davidson 1914 twin. jpaponne@yahoo.com.ar

58. hdhardrider6969@yahoo.com message: Wanted 58 -69 big twin right side case no cracks. Thanks george

57. pinettere@link2usa.com message: I need an oil pump body for an early sportster (66)Thanks,Ron
207-528-2857

56. leif.stenbacka@finnair.fi message: following parts for Duo-gLIDE 1961/1962 WANTED.
1. CIGARETTE LIGHTER BRACKET WITH CAST # 91805-60, with or w/o lighter
2. Steering damper
3. Rear bumper
4. Spotlamp brackets
e.t.c.
All option parts of interest for these Duo's. Thank you Leif

55. klaus-jensen@sja.dk message: Servicar in good condition.

54. flovikholm@hotmail.com message: WANTED. Parts for 27mod Cheif. Wheels or hubs, Front fender, Generator Splitdorf DU5H other parts can also be of interest.

53. info@ace-ltd-usa.com message: WANTED: I need a nice or nos set of cast iron lifter blocks for a mid 50's panhead. Also a really really nice rear fender for same. Please email pictures or call Pete at 603 396 8355. Thanks George!

52. raclark4@mail.uh.edu message: 19" vl wheel and brake assy. for sidecar

51. spfoxx@comcast.net message: Looking for Oil Filter Cup Assy. for '74 Sportster

50. hdpietman@wanadoo.nl message: wanted 46 chief headlamp bracket, lens motolamp) nos std. pistons, brake bellcrank, left hand shifter bellcrank, fog lights, fenderlight with real glas(not the indian head) I'm located in the netherlands, europe

49. kigy@centurytel.net message: WANTED: SERVICAR, ELECTRIC START, IN GOOD CONDITION

48. jbabchak@tribune.com message: Servi car metal box and fenders- top price paid for either a decent box or a decent set of fenders. call Jim 917-355-6903 or email jbabchak@tribune.com

47. trinitymotorworks@pshift.com message: Wanted Indian 45" 101 runner. Not looking for someone's restored baby. Just a good runner. Does not need to be complete or pretty looking. Something to enjoy an afternoon ride. Cash waiting. Or bikes / parts to trade.
Thanks George.

46. bdlaust@hotmail.com message: deperately need magneto for 1939 Rikuo 1297cc V-Twin(made in Japan under licence to Harley Davidson)Cash waiting or swap knucklehead panhead or flathead parts.

45. toadlyracin@hotmail.com message: any parts for the Sears 106, or 124
Thanks, Ralph

44. jenningsauntieem@aol.com message: WANTED ONE GOOD USED BAKEALITE CAP THAT COVERS THE POINTS ON A BERRLING E-21 MAGNETO I NEED THIS TO FINISH MY MAGNETO SO PLEASE LOOK AROUND AND SEE IF YOU HAVE ONE. THANKS JOE

43. sderby5492@aol.com message: wanted parts for indian military 841 seat tee, inlet air filter assembly harley xa filter will work

42. dvdsni@aol.com message: Wanted KJ rear fender,front wheel and brake parts,shifter,Have some motor stuff to trade. 360-676-2269

41. jenningsauntieem@aol.com message: WANTED I NEED AN OIL PUMP COVER TO FIT A 1918 HARLEY MODEL F. MAGNETO MODEL.SOMEONE HAS TO HAVE ONE FOR SALE OR TRADE. THANKS JOE

40. dixchief@rochester.rr.com message: 1939 Indian 130 mph speedo needed. have 52/53 BSC Indian speedo. trade or buy outright. Thanks George

39. chief348@juno.com message: Wanted; I'm looking for a Knuckle Chromed Aluminum Front Rocker Housing. I need an inexpensive one for a display Motor. It can be cracked or have some stripped threads. I don't need any attaching parts. Check your junk pile for one and turn it into cash. 6-12-04

38. mark 71572000@yahoo.com message: wanted 68 g or ge cases. in good condition I don't need title or paper work just good numbers and resonably priced

37. BIGESTUNA@AOL.COM message: WANTED: OLD HARLEY SINGLE CYLINDER
BELT DRIVE ENGINE (DON'T WE ALL) WILL TO
PURCHASE RUFF BIKE ALSO..1910,,11,,12,,

36. weyland@varangiankindred.org message: 1968 SHOVELHEAD CASES, BOTTOM END, OR MOTOR.
Doesn't need to be in good shape, important thing is finding one.

Thanks,

Weyland

35. codesixty2@hotmail.com message: LOOKING FOR A 1947 FL PROJECT. NO BOBBERS CHOPPERS OR BELT DRIVE - FRANKENSTIENS!!!!!! ORIGINAL CASES FRAME AND FORK OLDER RESTORATIONS WHATEVER. ANY HELP LOCATING A MACHINE WOULD BE GREATLY APPRECIATED. HAVE CASH WILL TRAVEL. THANKS GEORGE

34. zoomie@dakotacom.net thurn@noao.edu message: I an looking for a piston and ring set for 76 250 harley sx dirt bike.

33. Brent.askins@wku.edu message: Need a set of shovel cases, alternater bottom. Might take entire bottom end. I also need a kicker side bubble bag lid.

32. arobinson0217@hotmail.com message: WANTED: WLA Frame in good order, not needing repairs. A little scale here and there isn't a big deal...just no holes or welding needed.
Thanks George. Great board here!

arobinson0217@hotmail.com or (206) 283-9263, Anthony

31. sderby5492@aol.com message: need seat tee for indian 841

30. weyland@varangiankindred.org message: LOOKING FOR A SET OF 1968 SHOVEL CASES

29. djfitz@ocslink.com message: 1937 thru 1939 Chief project bike wanted. Original bike, basket case, or older restoration. I have the cash and just want to pay an honest price for an honest bike. If you have a '37-'39 Chief available, or know of one, please e-mail djfitz@ocslink.com or give me a call at 309-645-4623 Thanks! Dan Fitzgerald, Peoria, IL

28. bikerbob@direcway.com message: I am looking for a 1957 Sportster. Condition unimportant, just want all parts. Will buy mint as well. Thanks

27. jbekavac@sympatico.ca message: Hello,

My name is John Bekavac. I am the transportation coordinator for a film entitled A Bear named Winnie. The film is set in WW1, it is the story of Canadian Veterinary Corps officer Harry Colbourne and his pet bear that was the inspiration for Winnie The Pooh. We desperately require a functioning military motorcycle with sidecar of the period that could be available for rental. We may also require a dispatch rider's motorcycle, but we may be able to use one machine for both. The film is a Canadian/ UK co-production it will be filmed in Winnipeg, Manitoba Canada. Shooting will commence June 28, 2004 so time is of the essence. If you are unable to assist us, perhaps you could forward this message to others in the industry.

Thank You

John Bekavac

204 927 0707

26. dmargolien@yahoo.com message: For a '64 FL:
saddlebags, or just latches, or pieces of fiberglass with the latches or front hooks on it.
tail light lens. NOS, good used. Need not be perfect, but not cracked.
Dan 603-458-5013

25. burgular@comcast.net message: WANTED Guide GLASS RH-55 red tail light lense. Must have guidex script not cracked chipped, will pay reasonable market value. Must be able to send detailed closeup photos to: burgular@comcast.net or call (860)982-6126 Elmer

24. burgular@comcast.net message: Wanted : Harley 4 fin aluminum clamp on cooling ring for mid fifties & up Panhead and early Shovelheads will pay reasonable market value. Must be able to send detailed closeup photos to the following e-mail address : burgular@comcast.net or call (860) 982-6126 Elmer. Thanx's George!

23. burgular@comcast.net message: WANTED : NOS Panhead 1963 -1964 -1965 left side tank emblem Part # 61775-63 (L) WILL PAY reasonable market value. I have the right side and need a left. Original Harley only no taiwan or eagle iron junk. I know the difference. Must be able to send close up clear photos of both sides to the following e-mail address : burgular@comcast.net or call (860) 982-6126 Elmer Thanx's George

22. kigy@centurytel.net message: WANTED: SERVICAR IN GOOD CONDTION

21. kigy@centurytel.net message: WANTED: SERVICAR IN GOOD CONDTION ,

20. dhilk@comcast.net message: License plate wanted.
In search of 1947 Pennsylvania Motorcycle license plate. Will consider any condition.

19. jpaponne@yahoo.com.ar message: WANTED original or reproduction parts for Harley Davidson 1914 twin.
jpaponne@yahoo.com.ar

18. mark@linkcycles.com message: I need help determining the year of a henderson engine I have. The numbers on the boss are 23277 (note that the first 2 is smaller than the rest of the numbers so it could be 3277) I also need sources for parts and services for engine rebuilding and repair.
Thanks
Mark

17. 1st-mate@msn.com message: I'm looking to buy a centaur folding motor scooter also any parts or owner's manual. In good to fair condition for a reasonable price.

16. valron@charter.net message: WANTED TO BUY: LOOKIN' FOR TAIL SECTION FOR A 45 SOLO FRAME. ACTUALLY ONLY NEED THE CROSS PIECE FOR THE REAR FENDER MOUNT. EVEN WRECKED OR BENT COMPLETE FRAME. ANY HELP WOULD BE APPRECIATED. CALL RON AT 1-814-322-4003, OR E-MAIL. THANKS.

15. hilltopcycle@aol.com message: looking for 1st type hollow small shaft 1936 ohv knucklehead timer call john at 330 530 0728 or email hilltopcycle@aol.com

14. weyland@varangiankindred.org message: 1968 Shovel cases or case wanted to buy.
Condition is not the most important thing.
Finding them is.

Weyland

13. jbabchak@tribune.com message: Wanted: Harley Davidson Sprint full racing fairing and mounts from the 1960's; original or repro, any condition Top price paid. e-mail or call Jim (212)210-2715 work

12. pinettere@link2usa.com message: I am looking for the manual advance parts that go under a Fairbanks Morse Magneto on 66 XLCH.I have the Mag and the bottom bracket,I just need the hardware that goes between.Thanks, Ron

11. fredrik.lange@swipnet.se message: One set of bare large port 40-47 Harley OHV heads in good shape.

10. pete@614engineering.com message: Wanted: 1916 Excelsior kickstarter gear. I need the gear on the main shaft that has the ratchet teeth on it.

thanks!
pete

9. dbmoto@comcast.net message: WANTED-46 knucklehead parts. HAVE- frame, trany, springer front end and motor except inner outer primary. NEED- EVERYTHING ELSE

8. sammaddy@zoominternet.net message: WANTED: Schebler DLX 21 carburetor - body,partial,or whatever. Also,Hedstrom or Powerplus rear brake parts. Call Scott at 610-932-0580, evenings, EST. or email.

7. pigstye13@aol.com message: WANTED: Need to trade a extra WR cam for another WR CAm. I need the cam with the beveled gear on the end.The extra cam I have is one with the 2 gears on it with no bevel gear on the end.(903) 873-6644

6. fatdog1903@yahoo.com message: Stop By and see our latest update, June 1st! www.fatdogvintagesalvage.com Thanks George!

5. ebuyou@dm-tech.net message: Need the following for H-D XA-750:

(2) 50500-42

(1) 28805-42

(1) 28800-42

(1) 28821-42

(2) 32140-42

(2) 32070-42

Thank you very much! (submitted June 1, 2004)

4. yorgtat@hotmail.com message: LOOKING FOR A 74`BIG TWIN MILITARY REAR FENDER,EVEN WITHOUT THE REAR FLAP...AM LOCATED IN EUROPE...THANK YOU

3. tipatcarmc@juno.com message: HI I need a 1959 panhead complete motor w/title.(1959 ONLY).Rebuilder,dont need the distributor or carb or intake.(607)-796-2662 or e-mail me at tipatcarmc@juno.com

2. oldmtrcyc@aol.com message: WANTED:
1915/16 Harley twin cases.
1913 HD twin rear cylinder.
1913-15 Indian twin motor or lower end.
Thank you!
oldmtrcyc@aol.com

1. gpardos@ix.netcom.com message: Wanted pre 1911 HD motorcycle

May 2004

51. wolfebike@mchsi.com message: NEED A 1917 EXCELSIOR TWIN MOTOR PLEASE HELP
563-370-0654 please call
thank you

50. 66gt350@earthlink.com message: WANTED..ANY PRE-58 INDIAN MEMORABILIA. POSTER, SIGN, OIL CAN CLOCK ETC. HARLEY THOR POPE X HENDERSON CROCKER ITEMS ALSO. 1913 INDIAN HUBS,FORKS BARS,SEAT. YOUR PRICE..MIKE 209 274 2206 66GT350@EARTHLINK.NET

49. jdsal@telusplanet.net message: looking for parts for 1913 indian twin pedal start,need clutch parts,right hand pedal crank & sprocket,floor boards & brackets fuel tank,front fender,plus small items ,if you know of any parts or have any please email with info Thanks jed GREAT SITE GEORGE

48. karrington@erols.com message: Can anyone suggest a East Cost based shop that can service 1946 WL 45? Thanks in advance

47. indianfourdoc@aol.com message: Wanted: Cylinders and rear fender for 1925 Indian big chief. Any other 25 chief parts. Marty

46. raclark4@mail.uh.edu message: 30-33 VL sidecar frame and axle wanted

45. ziggy@ziggysmotorworks.com message: Wanted: set of 1928 indian 45 scout engine cases serial # prefex= CGP they look like 101 cases but are not.
have a set of 1927 45" BGP to trade or will buy outright
ziggy 360 871-8120

44. curiomark@adelphia.net message: Looking for a late 1949-1951 Harley OHV bigtwin wishbone frame.
Must be uncut clean original frame with all tabs and brackets.
Thank You!

43. oneinthewind1957@aol.com message: I am looking for a set of "RED", brake and clutch pedals for a 46WL restoration project. Must be in good shape and have mounting hardware intact.

42. oldmtrcyc@aol.com message: Wanted:
1915/16 Harley twin cases.
1913 HD twin rear cylinder.
1913-15 Indian twin motor or lower end.
Thank you!
oldmtrcyc@aol.com

41. sderby5492@aol.com message: parts for indian 841 need seat tee,inlet air filter assembly, battery hold down, air pump ,mufflers,rear bumper rear fender bottom section,saddle bag shields, ,

40. timdurrett@webtv.net message: wanted 1925 to 1929 big twin harley. prefer running. no hyper sales brokers.thanks tim

39. produksjon@bridgestone.no message: Wanted schebler GX1 or GX4, have other parts to trade. Lars

38. produksjon@bridgestone.no message: Wanted schebler GX1 or GX4, have other parts to trade. Lars

37. thegreatrandolfo@neb.rr.com message: Excelsior tool box for 1912 - 1913 twin needed . Prefer decent original but would purchase reproduction also.
Thanks,
Randy Keiser daytime 402-467-4126 evenings 402-421-0160
Or email me with details and price.

36. carlmessina@comcast.net message: Looking for a white brake pedal for mid '70 HD FLH. This is the one with the threaded stud off the bottom. If you don't have the whole deal I will take just the rubber. Will take 2 if you have them.
Thanks Carl

35. ingulv.burvald@c2i.net message: WANTED: For Reading Standard 1922 V-twin 1170 ccm:Handlegrips for brakes etc.
Inside mechanism for gas/ignition pulling. Or sketches of same.
Cam-gear wheels and camrockerarms for pushrods.
Or any other R-S parts for 1918-22 models.
Thanks Geaorge for fabolous pages.

34. spt75r@earthlink.net message: Looking for 28 Henderson 4 Intake manifold, clutch/flywheel and bevel gears. Any leads appreciated.Steve

33. portapotti@prexar.com message: For a 1936 VL- I need a rear chainguard and the little odd shaped cover for the clutch adjustement. Both of these items need to be in used but not abused condition. Prefer with black paint that isn't new. These will complete a barn fresh running 36 VLD that will be kept as it is rather than being restored. Thanks for any help and thank you George, you are the best. Call Dave at 207 695 2500 or Email. Have parts to trade or cash

32. mileshjr@juno.com message: WANTED TO TRADE: I HAVE AN ORANGE SNAP ON TOOL BOX, ONLY 3 YEARS OLD AND IN GREAT SHAPE, WITH A WHOLE BOX OF TOOLS, MOSTLY SNAP ON, THAT I WANT TO TRADE FOR A SERVI CAR, THE BOX I PROMISE IS NOT JUNK, SO, I DO NOT WANT A JUNK SERVI CAR, EVEN IF IT IS IN PIECES, THAT'S OK, I DO HAVE PICTURES OF THE BOX WITH TOOL, JUST E-MIAL ME, MILESHJR@JUNO.COM, I WILL BE MORE THAN HAPPY TO SEND YOU THE PICS., THANKS AND HOPE TO TALK TO YOU LATER.

31. bigestuna@aol.com message: WANTED: 1911 or 1912

Harley Davidson LOOP

frame for a V-TWIN

also any other

part for the

give years

thank you

30. burgular@comcast.net message: WANTED : NOS Panhead 1963 -1964 -1965 left side tank emblem Part # 61775-63 (L) WILL PAY reasonable market value. I have the right side and need a left. Original Harley only no taiwan or eagle iron junk. I know the difference. Must be able to send close up clear photos of both sides to the following e-mail address : burgular@comcast.net or call (860) 982-6126 Elmer Thanx's George

29. jenningsauntieem@aol.com message: WANTED ONE CAM CHEST OIL PUMP COVER FOR A 1918 HARLEY MODEL F.
THANKS JOE

28. cc4319@bellsouth.net message: Looking for 1941-up 45 solo frame uncut. Thanks Jonathan

27. cyclemikel@comcast.net message: wanted 59-60 xlh gas tank.complete solo seat-tee bar and spring assy for same.also need 60 ch frame and chassis parts.have big twin and servi parts to trade or cash.or call 603-343-2621-mike

26. timdurrett@webtv.net message: want front and rear fenders for 47 el thanks

25. Julian.Pahlow@T-Online.de message: D or DL wanted. 45. Once had one from Argentina. Was forced to sell it 96 in Germany. Does anybody know a running bike with Motor-number 30 D 4182? That was it! George, I thank you and beg for a left bound layout of the add list in future.

24. mod099@msn.com message: wanted---shovelhead motor, and / or shovel motor parts ..
George, Clean & Sober Mc. Oregon

23. bpoelma@hccnet.nl message: May 21. I am looking very seriously for a brake drum for a Harley-Davidson sidecar with juice brakes 1976. This drum was pretty special cause the needle bearing was pressed into the drum.
Also please email me if you have any WR engine parts for sale or trade: bpoelma@hccnet.nl Thank you George.

22. garcia_r@msn.com message: WANTED: Knucklehead 1946 and earlier... the older the better. Must be stock OEM no choppers or bobbers. Dusty, crusty OK. Have CA$H. Will pay finders fee for right bike. Call Ray @ (330) 799-3738

21. rnlind@westriv.com message: I'm in the market for a 1944 Knucklehead. Good original or high point restoration preferred. Not interested in pieced together reproduction stuff. I am well aware of what these bikes are worth and am willing to pay the price for the right bike. Please contact me if you think you may have what I'm looking for. Thanks in advance for any help. Also, a big THANKS to George for this venue!!

20. info@ace-ltd-usa.com message: Help: I need a set of NOS or near perfect cast iron lifter blocks for a mid 50's panhead. Please call Pete at 603 396 8355 and I will be happy to relieve myself of the necessary greenbacks. Thanks George.

19. shovel100@charter.net message:

castings for a 45 solo frame
i only need the castings so the frame can be bent twisted and thrashed as long as ALL castings are still useable

thanx george you da man

18. dkafton@inreach.com message: I am looking for a cast steel shift drum for a 1973 H-D Superglide. The one that I have is the "FL" style and it shifts bachwards. I need the one that is stamped "FX" This is the one that nobody wants!! I will pay cash or trade a brand new "FL" drum. Thanks, Dave

17. jenningsauntieem@aol.com message: WANTED ONE BAKELITE CAP FOR A BERLING MAGNETO THIS IS THE CAP THAT COVERS THE POINTS.PLEASE LOOK IN YOUR PILE OF PARTS I NEED THIS TO FINISH MY MAGNETO.THANKS JOE J.

16. dbmoto@comcast.net message: Wanted - 46 knuckle parts. dbmoto@comcast.com

15. indian@indy.rr.com message: OLD AMERICAN MADE MOTORCYCLES WANTED. Any American make before 1953. One or entire collections. I buy parts as well. I got the cash and will travel. Especially interested in ORIGINAL paint. Also interested in anything in the teens. Thanks, Joey

14. burgular@comcast.net message: WANTED Guide GLASS RH-55 red tail light lense. Must have guidex script not cracked chipped, will pay reasonable market value. Must be able to send detailed closeup photos to: burgular@comcast.net or call (860)982-6126 Elmer

13. kerry.schmidt@worldnet.att.net message: Wanted a ten wire key switch for a 1973 itialian made harley davidison

12. cymbidium6@comcast.net message: WANTED... any information on a Safti-Cycle. Guessing '40s but not sure. Bob. 205/792-0056

11. moses@neilsen.org message: I want a UL for a dignified restoration. I'll consider any condition. I'd appreciate any help.

10. brg1963@aol.com message: i am looking for a inner primary for a 1985 softail with electric and kick start

9. cc4319@bellsouth.net message: Looking for a set of nos .040 oversize pistons for a 1942 wla. Thanks Jonathan

8. garcia_r@msn.com message: WANTED: Knucklehead, 1946 and earlier.... the older the better. Crusty and dusty OK. Must be OEM no choppers or bobbers. Don't have to no trailer queen, just a good ol stock Knuck, HAVE CA$H, finders fee paid for right bike. Call Ray @ (330) 799-3738.

7. burgular@comcast.net message: WANTED : NOS Panhead 1963 -1964 -1965 left side tank emblem Part # 61775-63 (L) WILL PAY reasonable market value. I have the right side and need a left. Original Harley only no taiwan or eagle iron junk. I know the difference. Must be able to send close up clear photos of both sides to the following e-mail address : burgular@comcast.net or call (860) 982-6126 Elmer Thanx's George

6. workforbikes@earthlink.net message: looking for cleveland 1929 four banger parts....................
what do you have in the junk box?

thanks george

5. rokajonjul@aol.com message: knucklhead

4. dcannavomd@aol.com message: 1953 Indian Chief parts. No reproduction. Top price paid. especially chrome parts. E-mail best-

3. driver426@yahoo.com message: looking for harley 49-50 rear fender . price depends on condition. also stainless parts, foot clutch bearing cover ,timer cover, inspc cover, ph. 270-404-1865

2. sammaddy@zoominternet.net message: WANTED: Indian Powerplus parts - Front fender, front (primary) chainguard, clutch hand lever, rear external brake, 17T engine sprocket.Call Scott at 1-800-456-3669 days OR 610-932-0580 eves.(EST).

1. gpardos@ix.netcom.com message: Wanted 1914 HD side car. Pre 1911 HD MC

April 2004

96. stan_jones@knology.net message: need 64 cam cover. need 65 outer primary cover. need S&S stock bore panhead cylinders. stan_jones@knology.net

95. burgular@comcast.net message: WANTED : NOS Panhead 1963 - 1964-1965 left side tank emblem Part # 61775-63 (L) WILL PAY reasonable market value.I have the right side and need a left. Original Harley only no taiwan or eagle iron junk. I know the difference. Must be able to send close up clear photos of both sides to the following e-mail address : burgular@comcast.net Thanx's George

94. burgular@comcast.net message: NOS Panhead 1963 - 1964 - 1965 left side tank emblem Part # 61775-63 (L) WILL PAY reasonable market value.I have the right side and need a left. Imaculate original Harley only no taiwan or eagle iron junk. I know the difference. Must be able to send close up clear photos of both sides to the following e-mail address : burgular@comcast.net Thanx's George

93. bolly@secureroot.com message: I NEED SHOVEL MOTORCYCLES, and ship to Indonesian country.....

92. pan54dd@aol.com message: Searching for a delco remy 9 bolt horn for my knuckle, appreciate any help, thanks george.

91. RROBERT60@HOTMAIL.COM message: NEEDED 55 PAN HEAD REAR FENDER
ALSO HAVE 63 SPRINT H MODEL STOCK ORIGINAL CONDTION. FOR SALE
ILLINOIS

90. djfitz@ocslink.com message: 1935 thru 1939 Chief project bike wanted. Original bike, basket case, or older restoration. I have the cash and just want to pay an honest price for an honest bike. I also have a '48 Chief basket, less sheet metal, to trade up or down if interested. If you have a '35-'39 Chief available, or know of one, please e-mail djfitz@ocslink.com or give me a call at 309-645-4623 Thanks! Dan Fitzgerald, Peoria, IL

89. hd36ohv@hotmail.com message: For Trade: I have both an early and a late HD beehive taillite cover for Servi-Car that I would like to trade for Solo bike types - either vintage.

Thanks Jerry

88. indianfourdoc@aol.com message: Wanted: 1925 chief cylinders, rear fender, chainguard, ammeter, headlight switch, what have you got? Marty

87. dixchief@rochester.rr.com message: I need an original 41 Indian SS chain guard.
I have an original 46 chief chainguard to trade or I will buy it outright.
Thanks George

86. gwellin@yahoo.com message: Wanted 1952FL Original, basket, restored, all considered. Prefer hand shift.

85. danmargolien@yahoo.com message: need (1) 52550-59 frame mounted seat nose bracket for 64 FL any condition.

THX!!!

84. bobmac56@hotmail.com message: I'm looking for a front brake drum for a 47 Chief. I'm also looking for an orginal front fender for a 69 Electra Glide in HiFi Blue.

Thanks

83. perelle@comcast.net message: I am looking for a 1941 to 45 74ci knucklehead in military trim,anyone have one for sale, or know where to look? thank you

82. j.callaway@netzero.net message: Looking for "Harley-Davidson" front brake caliper decal for 1974 XLCH part number 45532-74. This decal was used for three years....'74-'77.

81. MoeD@Comcast.Net message: Wanted
1961 Harley Topper wanted- AH Model (choke lever is left to right, not front to back)

Thanks

80. ricomorgan007@hotmail.com message: looking for a primary chain case cover for a 69 xlh will pay reasonable price for good condition

79. zebulun.mushlin@ge.com message: Looking for nimbus motorcycle original condition..have cash

78. dcbm@aol.com message: need a complete exhaust for a 49 indian vertical. thanks

77. amuck@earthlink.net message: OWNER OF A 1930 HARLEY-DAVIDSON 45D IS LOOKING FOR A H-D SIDECAR TO ATTACH TO MY BABY. MY BIKE IS 90% RESTORED TO PERFECTION, AND I WOULD LIKE TO GET LUCKY AND FIND AN APPROPRIATE SIDE HACK.

76. jpaponne@yahoo.com.ar message: WANTED original or reproduction parts for Harley Davidson 1914 twin.
jpaponne@yahoo.com.ar

75. bike@antiquebikeparts.com message: WANTED JOHNSON MOTORWHEEL ORIGINAL PAINT TANK -other Johnson and or Merkel motorwheel units/parts/memorabilia. Thank you.

74. harley1951man@aol.com message: need a set of 45 gas&oil tanks left hand shift,1959-1973 no junk but affordable

73. corner1@ebox.tninet.se message: Panhead cases, need 1948 panhead cases, must be factory numbers, no grind or weld with restamped numbers, must be OEM factory numbers, EL or FL...Thanks

72. wolfebike@mchsi.com message: wolfebike@mchsi.com Wanted 1917 Excelsior Twin Motor also need rear stand and Handlebar mounting Bolts.Please contact me.

71. richadr.fisher@tinker.af.mil message: I need the top part of a carb for a 1972 Harley Davidson Rapido 125

70. garcia_r@msn.com message: WANTED: Knucklehead 1946 or earlier must be OEM, no bobbers or choppers, crusty and dusty OK. Have CA$H , looking to spend 18,000-20,000 e mail or call Ray @ (330)799-3738 will pay finders fee for right bike, any leads appreciated.

69. colbyhendrickson@hotmail.com message: Wanted, I Beam springer in good to great condition...

68. wazzfu@optonline.com message: i need a 65-69 trans.

67. Rudy4536@aol.com message: need Linkert M-16 and M-18 carbs, have M31 and M55 to trade or cash.Also need part number 1102-35 manifold -1- year only. Thanks

66. devid.moto@virgilio.it message: I wanted a complete engine for my Henderson four model G year 1917, can she help me? Thanks. Regards: Davide

65. info@ace-ltd-usa.com message: WANTED: I am looking to buy any quantity of NOS VL parts. Contact Pete at 603.396.8355.

64. terrysmc@frontiernet.net message: looking for side car fender light for top of fender . For 48 Panhead

63. lawless_m@comcast.net message: I really really need a repair manual for a 1974 AMF Harley 125 cc on/off road bike. Any info will be greatly appreciated!!!
Thanks,
Melissa

62. oldmtrcyc@aol.com message: Wanted: Pre-1909 double clincher rims used on many early bikes.
Thank you.

61. patjim@sacoriver.net message: AMAL twist throttle wanted for early 50's vintage (type 16) for left hand, 7/8 bar. Was used on a 1953 Indian Patrol vertical and maybe some Brit bikes. Thanks.

60. shartley@netpluscom.com message: Wico Magneto parts wanted.
Need a cap, points, and condensor for a XV1922.
Thanks George!

59. sderby5492@aol.com message: need air cleaner assembley for harley xa

58. tipatcarmc@juno.com message: I need a good set of knucklehead motor cases with title. Tim

57. chief348@juno.com message: WANTED; Johnny McCartney from Canada please e-mail me. I have a friend i'm trying to help. He is a fellow AMC Member up in Mass. and he has an Indian 441 Project Bike For Sale you might be interested in. 4-26-04

56. sderby5492@aol.com message: need 640 and 741 rear fender also bottom rear fender flap for 841

55. xbrightman2004@yahoo.co.uk message: ATTENTION TO THOMAS FENRICH &JERRY WEILAND WHO HAD COMPALINS FOR UNDELIVERD PARTS PLEASE SEND UR LIST OF PARTS TO THIS EMAIL INSTED OF OLD EMAIL(XBRIGHTMAN@YAHOO.CO.UK)

54. jpomes@jazzfree.com message: Wanted motor Harley single 1909-12 Thanks

53. djfitz@ocslink.com message: 1935 thru 1939 Chief project bike wanted. Original bike, basket case, or older restoration. I have the cash and just want to pay an honest price for an honest bike. I also have a '48 Chief basket, less sheet metal, to trade up or down if interested. If you have a '35-'39 Chief available, or know of one, please e-mail me or give me a call at 309-645-4623 Thanks! Dan Fitzgerald, Peoria, IL

52. johnkane@thegranitekitchen.co.uk message: MISSED OFF PREVIOUS AD - SEEKING PROJECT BIKE BIG TWIN OR FOUR, INDIAN,HARLEY,HENDERSON,EXCEL ETC SEND DETAILS/PHOTOS TO johnkane@thegranitekitchen.co.uk

51. tipatcarmc@juno.com message: Im in need of a knucklehead motor that turns over,it does not have too run.If you have one let me knowTim

50. johnkane@thegranitekitchen.co.uk message: AM LOOKING FOR EARLY HARLEY OR INDIAN RUNNING OR NOT COMPLETE OR BASKET CASE - BIG TWINS ONLY PLEASE REPLY WITH PRICES/PICTURES TO johnkane@thegranitekitchen.co.uk

49. deal@beautyofspeed.com message: HARLEY WR PARTS WANTED -- BUY or TRADE --

I'll buy ANY WR & WLDR parts. Indiviaul parts or stashes. Serious buyer. Contact Eric at deal@beautyofspeed.com

Also if you like these models you can visit my website dedicated to WR & WLDR Models. Over 1000 pages of rare info, data and pictures. 100% free for your viewing pleasure.

48. vtwin@ix.netcom.com message: Wanted: Round bell-style S&S aluminum aircleaner.

Thanks, George.

47. ebrown@mag-net.com message: Wanted - right side motor case for a 1935 Standard Scout in good condition. Thanks...Eldon

46. burton@up.net message: Looking for stock, unchromed springer front end in good condition to fit a 1938 ULH. I need everything but the wheel and handlebars. Email burton@up.net. Thanks, Bud.

45. redfern@acmeaust.com message: Harley 1953 K Model gastank, preferably a bit beatup,and in factory black paint. Going on an barn fresh and original,black KRM. Please email if you can assist, thanks.
Thanks for the site George!

44. fredrik.lange@swipnet.se message: For BT 46-47, kicker cover, inner primary and kick stand bracket.

43. devid.moto@virgilio.it message: Good morning, my name is Devid, do I look for a motor for my Henderson model G year 1917, can she help me? Thanks. Regards: Davide

42. devid.moto@virgilio.it message: Good morning, my name is Devid, do I look for a motor for my model G year 1917, can she help me? Thanks. Regards: Davide

41. VL3036@aol.com message: 4/19 Looking for a NOS in the box pinion shaft and sprocket shaft for a 1941 FL.All help apreciated.Thanks

40. arts59@sympatico.ca message: For a1917 harley wheels seat handel bars and misc

39. Horsoljer@aol.com message: Servi-car wanted, 60's on up. Police model preferred but will consider any. Should be in decent condition.
Can be reached by email at horsoljer@aol.com
Thanks,
Steve

38. arcand7@juno.com message: need HD part no. 59100-77, fender decal.

37. cc4319@bellsouth.net message: Looking for a good OEM front fender for a 1969 XLH sportster.

36. hd36ohv@hotmail.com message: I have need of a front FL 74" HD panhead cylinder. Prefer .040 or less but what have you.

Thanks Jerry

35. trainnut@northnet.net message: Looking for OWNERS HAND BOOK for 47-48 or 49 Harley servicar. Appreciate any leads, thanks

34. sammaddy@zoominternet.net message: WANTED : Indian Powerplus parts - front fender, chainguard, clutch hand lever, 17T engine sprocket, Solar headlight, taillight. Call Scott at (610)932-0580 evenings EST. Any leads appreciated!Thanks.

33. pigstye13@aol.cxom message: Looking for OEM front exhaust valve cover tin top (no chrome or repop or pitted junk) NOS idler and timing gear SHAFTS,NOS oil pump drive shaft,and pack of (8) NOS valve keepers. Cash or 1930-1965 H-D parts to trade (903) 873-6644

32. VL3036@aol.com message: I need to find a nice set of upper and lower outer fork springs correct for the 30-36 VL. NOS/OEM/repop,don't care as long as they are in good shape.Have other parts to trade or cash.VTwin never has them and Harbor Vintage is out of there minds at $135 for 4 springs.
Thanks, George.....................14 April 04

31. garcia_r@msn.com message: WANTED: Knucklehead must be original without a bunch of k-mart junk on it. The older the better. Dusty and crusty OK. Not looking for a trailer queen... just a nice original Knuck. Prefer 46 and earlier. I am a serious buyer and will be at Oley with CA$H and on the hunt. Please e mail or call Ray @ (330) 799-3738.

30. oldmtrcyc@aol.com message: Wanted:

I need a rear cylinder for a 1913 Harley twin. I have an extra front cylinder for trade. I also have an extra loop frame (~1918) for trade.

Also need a 1913-15 Indian twin motor for hotrod project. Thanks!

Jim Hoffman
oldmtrcyc@aol.com

29. j2dever@juno.com message: 54 FL right case halve, front and rear cylinder for 54 FL. Please send contact information with response please. I am good for it. Thanks in advance to anyone who can help, AND

Thank you, George! You are righteous!

28. damonp@msn.com message: 1907-1914 Harley engines needed. Will pay good money.Thanks Damon Pfeifer e-mail or 614 206 6757.

27. crystalsicotte@yahoo.com message: WANTED cam cover for 67 iron head early XLCH
interested in other original eequipment for same
Tampa, Fl

26. Kevin_01@charter.net message: SPEEDO FOR 1950 FL REAR fINDER FRONT FINDER TRIM MIS CP BOLTS FOOTBOAD PADS FOOT CLUTCH PADSLOT OF OTHER THING HAVE A TANDEM SET WITH ALL BUT SEAT

25. arnoldcd@bigpond.net.au message: Wanted Indian chief rigid frame 37-39. Minor damage OK I will arrange shipping .

24. jpomes@jazzfree.com message: Excelsior 1914 twin model C, parts wanted, rear fender, fron fender, rear hub corbin, exaust complet, parts for trade : rear hub harley 1909, I have many pieces of EMBLEM twin 1915. jpomes@jazzfree.com
Thank you

23. wallner@cslsoft.de message: searching 1928/29 Harley j project. Should be complete. Please NO ruff and rotten parts.
Thanks for your contact
best regads
chris

22. 0002kwm@msn.com message: Needed, 1957 Panhead frame let me know condition and price.

21. sselder6@yahoo.com message: Looking for 1941-1946 speedo in working cond

20. justbecause@dm-tech.net message: I'm looking for a real Harley square or rectangle tool box. This is the one that came on the flatheads or early Knuckleheads before the kidney shaped ones of the 1940's and later. I know I can get an after market one, but I'm looking for an original. Posted April 11th. Thanks for the wonderful site, George.

19. jensh@surfmail.dk message: I need parts for H D 1910 Singel
Hansen Denmark

18. flathead@freemail.hu message: WANTED : All police accessories, radio rack, RCA receiver for my 38' H-D Police motorcycle + wanted : R-N-1-2-3 shift gate (36-46) NOS or aftermaerket, too.

17. huwyssen@tiscali.ch message: Wanted: Front and rear Zylinder's for J 1923 please offer what ever you have. Thanks

16. manske@charter.net message: help needed starting a vl project bike it is not going to ever be a 100 point show bike it is starting out to be a bobber/rat bike so the parts can be well used maybe i can use them as a pattern? i am looking for a set of beat up rusted out tanks and a beat up bent broken front end or pieces e-mail me and let me know what you have and how much
thank you george for a great place to find parts

15. marshmetz@aol.com message: Complete seat post assembly for 1926 Harley JD. Also need front brake mount that is welded to rear frame leg on 1928 Harley JD. Thanks Ken

14. bob.goldman@attws.com message: Looking for gas tank emblems for a 1962 Sportster large "turtle" tank. They are oval raised plastic. Bob bob.goldman@attws.com

13. workforbikes@earthlink.net message: looking for cleveland motorcycle parts......... gas tank and any extras. have a few hd and indian spares.

THANKS GEORGE

12. gwen.graeme@xtra.co.nz message: 1925 Henderson Deluxe parts wanted. Rear brake backing plate suitable for internal heel brake.Operating cam and lever for same.Would like undamged crankcase and pan set. Thank you.

11. rudy4536@aol.com message: In add no.2 I had the part number wrong for the wanted rear stand.....Need 3051-30A used on 1930-35 45" and singles. Thanks

10. joegassman@aol.com message: Wanted: 1911, 1912 PRATT-FOUR motorcycle, made by Pratt-Elkhart Carriage Co. of Elkhart, Ind. I am looking for a bike, parts, pictures, sales catalog or photocopy, and even just information as to where any Pratt-Fours are located, be it in museums or privately held. You can also call me at 305-849-3277

9. sherilg@gibralter.net message: WANTED: FRONT 4 FIN CYLINDER FOR 39EL MOTOR. MUST BE IN GOOD SHAPE.
THANKS GEORGE!

8. HD1933VLE@aol.com message: 1925-29 JD 74-inch front cylinder with 18mm spark plug hole. I'm posting this for a friend. This is to be used on a running motor, so it has to be in very good or restorable condition. THANKS GEORGE!

7. oldmtrcyc@aol.com message: Wanted:
I am looking for a magneto for a 1911 HD Twin (open mag, 45 deg, CW).
Thank you!

6. 48hdbob@fiberhighway.net message: Wanted;NOS or excellent used 3571-38C oil return line for '38-'40 EL.

5. sherilg@gibralter.net message: Wanted: left flywheel for 39 el motor. connecting rods for the same. must be in good usable condition. Thanks!

4. LMac59101@AOL.COM message: I am looking for a spec. book for a 1921 HD model J. I am also looking for the shafts that suport the cam and lifts. Any help? Lonnie Bekel at 1-888-493-0036

3. gramps_95457@yahoo.com message: Retire now!! I'm looking for a set of 41 knuckle head cases for a perfect bike, well maybe a nine will do!! Bob

2. rudy4536@aol.com message: Need front chain guard 3801-32 used on 1932-36 45"s rear stand 3051-35 used on 1930-35 45"s and singles, and 2782-30 steering damper screw. Thanks....have cash or some trade stach.

1. gpardos@ix.netcom.com message: Pre 1911 Harley Davidson motorcycles

March 2004

56. arildsoe@post2.tele.dk message: Hello I´m restoring af H-D 2 cam (engine no 30FHB806) and need the following parts
98-28A inlet housing cap
132-28b inlet pushrod lover end adj. the one with a ring on upper end for mounting the felt washer
135-28 retainer cup spring
110-29 inlet lever bolt
229-28 oil drain pipe clamp
512-28 relief cam stud spring
516-28 relief lever
528-28 relief stud
632-28 generator drive gear
653-28 armature shat nut
3393-28 generator control coil clip
3394-28 generator control coil clip stud
1523-25 drive case to generator screw
1542-20 timer base set screw
1408-28 connection screw short
1409-28 connection screw long
24-09 cylinder plug nut
I have some nos 2 cam parts and a lot of nos small parts pre 1930
for trade

George thanks for a great side.

Tom

55. trainnut@northnet.net message: LOOKING FOR 14-15 TWIN INDIAN MOTOR COMPLETE. HAVE 1912 MINNEAPOLIS MOTOR IN RUNNING CONDITITION WITH MAG. CARB. TO TRADE. MINNEPOLIIS MOTOR NOT FOR SALE. ONLY TO ASSIST IN A TRADE. THANKS GEORGE FOR A GREAT SITE!!!

54. shoegum@email.com message: Parts needed for a 1949 INDIAN WARRIOR TT:
Front and rear fender (complete),
Rear tail light (assy),
Headlight (assy and mount),
Carburetor (amal),
Exhaust pipes and mufflers.

54. shoegum@email.com message: Parts needed for a 1949 INDIAN WARRIOR TT:
Front and rear fender (complete),
Rear tail light (assy),
Headlight (assy and mount),
Carburetor (amal),
Exhaust pipes and mufflers.

53. 33vle@optonline.net message: W A N T E D
Harley two cam motor
Can be FH or JDH
Complete bikes considered
S E E K I N G
Early American Bikes, Barn Fresh
Email Pics, info, or just a lead...

52. oldmtrcyc@aol.com message: Wanted:
1915/16 Harley twin cases.
1913 HD twin rear cylinder.
1913-15 Indian twin motor or lower end.
Thank you!
oldmtrcyc@aol.com

51. trinitymotorworks@pshift.com message: Wanted: Parts for 1922 Chief, various chassis parts and internals for engine and tranny rebuild. Also looking for 841 parts and 1906 Indian Single Parts for chassis.
email trinitymotorworks@pshift.com
Thanks George

50. jbricen@choiceonemail.com message: wanted front fender mount siren and controls for a 73 servicar

49. dkafton@inreach.com message: WANTED WANTED WANTED: 1916-1924 Harley "J" left side gas-oil tank for race project. It doesn't have to be perfect, I just need something fairly soild that I can work with. I have CASH or parts for trade. Thanks, Dave

48. CMahon2@AOL.com message: Any '69 or earlier xlch sportster; running or basket case. Preferably clean and stock.

47. 044232556@telia.com message: 1916 IVER JHONSON MOTER 2-cylWANTED !!! Or only the cylinders and clutch!!
I have parts for trade, or a good price!!
Per Olofson Sweden Tel:+46-44-232556 Fax:+46-44-232556

46. dhilk@attbi.com message: Wanted, Sidecar for Knucklehead.
Ideally a 1947 would be preferred, but will consider any year from the era that is HD original or restorable.

45. carlmessina@comcast.net message: Looking for correct front exhaust clamps that clamp the front pipe to the squash pipe and to the frame for a 1955 FL. Thanks for your help. -Carl

44. stryker@empireone.net message: The last items i listed are not WANTED,They are for sale.I listed them
in the want ad section by mistake.Sorry!!

I am looking for a nice 47-50 Right Side Panhead Gas Tank Emblem.Thanks
George!!

43. stryker@empireone.net message: NOS Complete Superior Panhead "Shotgun" Exhaust System in the BOX with all hardware.

Nice 49-50 3 ribbed bobbed rear fender

Set of 4 1948 UL valve covers and lifter blocks

Like NOS Original set of UL cam gears.

32E generator out of a 48 UL.

Very nice ridgid rear crash bar.

50-54 Outer primary cover.

Mint perfect 50 glide front fender.

42. jje100@earthlink.net message: WANTED:

18" Rims for a 1944 Indian Chief.

Horn and mounting bracket for 1944 Indian Chief.

Foot rest boards for 1944 Indian Chief

Foot rest boards for 1928 Indian Chief.

Email or call me if you have these or can direct me to someone who might. Thanks!! jje100@earthlink.net (720) 350 6883

41. glazinray@sbcglobal.net message: looking for fuel petcocks for 38el right and left THANX RAY

40. arts59@sympatico.ca message: wanted for 1917 harley front and rear wheels, seat, transmission linkage, carb linkage etc.
Thanks George

39. carl399@msn.com message: Berling magneto E 41 and E21
Henderson 1918 - 1919 parts.

38. newmancausey@aol.com message: complete shovelhead motor with title

37. newmancausey@aol.com message: complete shovelhead motor with title

36. walmsci@qwickconnect.net message: Salsbury Scooter 1940's model 600 engine looking for parts and any information I can get ... "HELP"

35. bmj1393@sbcglobal.net message: Looking for Original Welbike & the following Brockhouse Corgi items:
Peter miller book “from welbike to corgi”
HT plug wire nut for Miller mag.
air cleaner-2
Amal carburetor 259/001
decals/transfers
tank rubbers
handle bar grips
brake pedal
handlebar metal plate
complete exhaust
rear handle
fuel tank petcock
taillight
headlight
complete motor mki/mkii
drive chain
kickstand/centerstand
THANKS, Brian

34. tonysehn@telus.net message: Looking for 1930 to 1936 VL parts
Also need a frame for a knucklehead

33. tony@acmeaust.com message: Harley-Davidson K model gas tank wanted. My 1953 motorcycle I have is barn fresh and unrestored, however missing a gas tank. I need a FACTORY PAINT, BLACK GAS TANK, preferably with imperfections, dents and scratches. Please email tony@acmeaust.com
Thanks, and thanks George for the opportunity to put this want advert on your site.

32. parkerize@charter.net message: Wanted Following Harley and Indian Parts: Original early knuckle 36-38) brake light switch with pull chain; 48 HD Big twin front and/or rear fender with original blue paint (will pay super high dollars for) and original blue dash cover (also have perfect originals that have been repainted to trade plus my cash if you like); 46 Chief original exhaust header (i.e., without the bracket by the floorboard) and original muffler; original stright 46-48 chief front crashbar with decent patina to it; original HD non-vented solo seat; 47 part # Indian chummee seat and 46-48 Indian Chief saddlebags. Thanks. 203-264-1540 or parkerize@charter.net.

31. indianut@cs.com message: Wanted rear wheel-brake for '28-30 101 Scout. Have nice complete set of handlebars for same to trade! Thanks, indianut@cs.com

30. jm34coupe@webtv.net message: Wanted, complete air cleaner assembly for 1939 Chief, scout or 4

Thanks

29. ckuzba@centurytel.net message: i am looking for
(2) 11386-38 old 68686-38 new spotlamp switch
(2) 11371-38 old 68660-38 new spotlamp lens
(2) 11376-38 old 68673-38 new spotlamp lens gasket
if you have and want to part with, please email me.

28. peashooter27@aol.com message: I am looking for a complete 1925-29 Harley J or JD engine. Can pick up at Oley
Thanks
Peashooter27@aol.com

27. marshmetz@aol.com message: Complete motor or parts for a Marsh Metz twin. Also sold under the names Arrow, National and Peerless. This is a 90 degree twin. Thanks Ken

26. johnlord@webtv.net message: Looking for 1940-1947 Knucklehead or 34-39 Indian Chief. Must be frame and motor numbers matching and correctly restored. Not necessariy 100 point bike, but very nice correctly restored rider.

Thanks

25. LESLIEWHIT@AOL.COM message: Looking for a 1939 big twin frame and a springer summer windsheild you can email @ lesliewhit@aol.com

24. sammaddy@zoominternet.net message: WANTED : for Indian Powerplus 1916 - 1921. Front fender, rear external brake band, front chainguard,exhaust,and clutch lever.
Call Scott 1-800-456-3669 ext.67540 7-3 m-f EST or leave message.

23. indian@indy.rr.com message: Private collector pays CASH for motorcycle loads. Must be mostly American bikes or parts. No load to big. I like any American brand such as Indian, HD, Pope, Merkle, Henderson, Reading, ect... I'm professional and will travel. I have done one bike deals and 200 bike deals. Email me what you have or call at 317 201-7777. Thanks, Joe

22. jenningsauntieem@aol.com message: WANTED ONE CAM CHEST AND COVER TO FIT A 1918 HARLEY MODEL F.DOES ANY BODY HAVE ONE FOR SALE OR TRADE? THANKS JOE J.

21. OLDVTWIN1@AOL.COM message: LOOKING TO BUY A JDH MOTOR, 8 VALVE OR NOT

20. hogluvr1340@yahoo.com message: Still looking for an old Harley restoration project, prefer 45 Flathead but will also consider Panhead, Knucklehead, Servicar, etc. partial or complete, original or molested. I am not a collector, just a guy looking to fulfill a lifelong dream of restoring an old Harley, don't have the bankroll of a collector either!! I guess this means, something CHEAP, the rougher the better! Send 'em all my way, Thanks

19. cc4319@bellsouth.net message: Looking for a flathead 45 solo complete or basket case. Thanks Jonathan

18. pjung@wwag.com message: Looking for a 1926-29 J/JD transmission case or complete transmission.
No welds or cracks pls, because this is what I have.

17. Suelynnrich5@yahoo.com message: 1947 Whizzer motor complete with clutch pulleys and Carborator. Rebuilt and running. $400 please call Oopie at 508-278-9429 or e-mail Suelynnrich5@yahoo.com

1971 Commando motor very low original miles. Complete with Carbs. Cleaned and very nice. $600 please call Oopie at 508-278-9429 or e-mail Suelynnrich5@yahoo.com

Linkert 51L 80 Inch HD Carborator. Nice condition and still has nickelplate. Complete, cleaned, and ready to run. $250

1935 HD Basketcase Model VLD BARN FRESH. Original matching Numbers. Frame uncut--no rust. Front end complete, motor good condition. Complete -- turnsover. No Carb, Manifold, Timer. Cylinders have no broken fins .030 pistons in it. Transmission complete and in good working condition. Clutch complete but rusty. Two wheels -- one rusty. Clutch pedal and strap -- rusty. Both axels. No brakes, sheet metal, or handle bars. $3750 Please contact oopiesiron@yahoo.com for photos. Please call Oopie at 508-278-9429 or e-mail Suelynnrich5@yahoo.com THANKS GEORGE!

16. howardb@visi.net message: 1949 harley 45, purchased in 1967, restored in 1989, have only ridden 5 miles since that time
$12,000.00, pictures upon request

15. rhondap@netconx.net message: Wanted: parts for a 1948 service car G series, it requires a v-twin flathead. My future husband has the frame and some parts, he would like to find all of the parts. Is there anyone who can help me?

14. pigstye13@aol.com message: Looking for NOS 45/servicar oil RETURN line, (903) 873-6644

13. indian52@maine.rr.com message: indian52@maine.rr.com message: I'm looking for a dual carb. intake manifold for a 38 to 42 Indian 4 cyl. I know Indian didn't make them for these years, but I'm betting someone made one for a hotrod, boat, airboat, airplane or whatever. A friend saw one at Oley last year-but I couldn't hook up. Information would be a real help. Thanks George for a great site

12. racer@beautyofspeed.com message: I'm looking for a set of 1941-1946 WL gas/oil tanks in great condition. This is for a 1941 model I am restoring, so I'd like to find an early set which has the brazed oil fittings and no plug on the gas side. I could settle for an oil side only. Let me know if you have anything. Thanks. Eric

11. indianbartje@hetnet.nl message: Is there anyone who can help me ?? I am searching for a generatorcover
for Indian Powerplus from 1920 repro is no problem, even an address
from someone who makes or sells them is more than welcome !!!!!
I am also watching for a brakepedal for the same bike.....
I hope that anyone can help ....

10. mark@linkcycles.com message: Anybody have any info on this Harley made tool? It seems to be a cylinder lap of some kind. The actual tooling is missing. It is early twenties vintage and is Harley made FOR SURE. I can tell by the casting numbers.
Click Here to See Pic
This was used by a foreign Harley dealer in the twenties. Harley must have made a service buliten of manual to go with it.
HELP!
Regards
Mark Masa

9. hd36knuckl@aol.com message: WANTED 3 speed & reverse shift gate for 1936 Knucklehead. Also need handlebars for 1936-1938 OHV and UL.

8. fatdog@wctc.net message: Also need XA oil pump drive gear cap, Part Number 26120-42 Thanks!

7. fatdog@wctc.net message: Looking for XA aircleaner unit, need not be NOS but at least restorable. Thanks George.

6. mikelmans2000@yahoo.com message: I am looking for a Pan or Shovel motor to rebuild for a project bike.
mikelmans2000@yahoo.com
Thanks Mike

5. 33vle@optonline.net message: Looking for 20's HD factory motor "FHAC orFHAD" Motor or bike complete.
Looking for pre-12 HD motors, 15 and earlier twins. Will consider complete bikes.

4. rr4253@enetis.net message: wanted! complete 55g motor, bottom end or cases.
Dan

3. panmanhd@earthlink.net message: Can anyone help me?? I'm looking for some old school style hardware and parts for my 48UL bobber project. I need a colony chrome acorn cam cover nut kit for a UL and chrome acorn generator screws, (I have both colony kits made for a 45 to trade) A finned linkert air cleaner made for a flathead , a 36-54 finned outer primary cover and finned derby cover, old big flathead upsweep pipes, orignal bobbed flathead rear fender, and anything that was custom made by colony or paughco etc for a UL flathead back in the old days. any help would be great. I'm trying to build a cool bobber to wow 'em at davenport in 04 Thanks george

2. carl.d@mobilixnet.dk message: Henderson 1918 - 1919 parts.
Thor 1916 parts.
Reading standard parts 1917 - 1922.
Cleveland parts.

2. carl.d@mobilixnet.dk message: Henderson 1918 - 1919 parts.
Thor 1916 parts.
Reading standard parts 1917 - 1922.
Cleveland parts.

1. gpardos@ix.netcom.com message: Looking for 1914 HD side car. Pre 1911 Harley Davidson MC

February 2004

175. johnm@goulburn.net.au message: Wanted to buy a good running original Knucklehead or Panhead,will pay fair price,must be prepared to help with shipping,John in Australia.

174. johnm@goulburn.net.au message: Looking to buy a good running and original Knucklehead or Panhead,will pay fair price. Must be prepared to help with shipping. John in Australia.

173. carlmessina@comcast.net message: I am looking for a front bumper for 1973 HD FLH. Original with good chrome prefered. Let me know.

172. 48hdbob@fiberhighway.net message: NOS or excellent used 3571-38C oil line ,'38-'40 Knuckle

171. lostmorality@hotmail.com message:

Servi-car REAR frame section: Looking from the seat post back
Prefer Mech. frame. Please no dreamers with $700
frame sections.

170. oldmtrcyc@aol.com message: I am looking for the following items and have stuff for trade!
1913-15 Indian Twin motor,
Rear cylinder for 1913 HD,
Cases for 1915/16 HD.
Thank you George!

169. davesvc@netzero.com message: 1913 harley rear clyinder needed ,also the rocker tower,any help appreciated. THANKS GEORGE

168. bleathers1973@yahoo.com message: looking for new/used parts/magazines/chrome, for 1973 tx 125cc enduro.
any and all items will be considered. send photos if possible!

167. dbeatty@tts.bwauto.com message: Wanted: Parts for 1971 Harley Davidson 350 Sprint. Need rear shocks, tail light assembly, points inspection cover, cables, etc... Please e-mail me if you have anything.

166. bdfry@flash.net message: WANTED:Harley FL 1947 Offset Springer Complete Front End. Bars. Fender.
Let me know? What ya got? Chicago.

165. 100scoot@charter.net message:

hey guy's on ebay
just a heads up " ulh80 " is being investigated for shill bidding as " getflat " is the same person bumping up the prices on his own auctions

i just thought you'd like to know theres a snake in the grass

thanx mike

164. plc6944@aol.com message: WANTED: 1961 or 1962 FL / FLH Panhead basket case
... Must be at least 90% OEM

163. mikesoldbikes@sympatico.ca message: Looking for NOS or reproduction "Cycle Ray" headlight for 36-37 Knucklehead.
Need 18 inch rims x 4 for 36-38 Knucklehead
Looking for Linkert M6 carb

162. jefzolnier@hotmail.com message: 4 NOS Handlebar Riser Studs and combination Filler Plug and Dipstick for horseshoe oil tank for a 1957 HD Big Twin.

161. hogluvr1340@yahoo.com message: Looking for Basketcase/Project Bike...Looking for an old Harley restoration project, Pan, Flathead, Servicar, etc. partial or complete, original or molested. I am not a collector, just a guy looking to fulfill a lifelong dream to restore an old Harley, don't have the bankroll of a collector either!! I guess this mean, something CHEAP, the rougher the better! Send 'em all my way, Thanks

160. lpc@capgroup.com message: Wanted to buy transmission for 1947 Harley knucklehead.

159. brcontheroad@aol.com message: Looking for a 1948EL righthand Motorcase. Mine is cracked on the inside, repair is questionable and months of waiting time.

158. dexters@rea-alp.com message: Looking for a generator shield for early 40's chief, original or repop. Also need compression reliece return spring for Indian powerplus, early scout and chief. Any information would be greatly appreciated!

157. sfrizzelll@aol.com message: i need a good set of useable running boards with the rubber for a 26 scout prefer crusty but readable to match the barn fresh look of this bike, also need the external brake band assembly for this export model from australia, it does not appear to be the same as 101 as it has the cable bracket already attached to the rear outer drum cover this is a dual brakeband model also need the brake lever assembly for the handlebars for the same machine 1926 scout.

156. traderjames@hotmail.com message: Wanted! Will trade for a oil cap that says 710 stamped on the top. I have seen these on some WLA HD military bikes but it is a decal. I need the stamped type OIL CAP that has the bayonet type seal match to the tank with or without good chrome, painted ok,flakey chrome ok,maybe. Whatcha got? send pictures and details. Thanks George for the #1 M/C site in the WORLD!

155. tplumb@jacobscorp.com message: Wanted 65FL or FLH basket case

154. mark@linkcycles.com message: FOR TRADE ONLY. I have an extra 1923 / 24 style Harley JD GAS cap for Trade for One marked OIL. This is the style with the two raised rings. A picture is included in the for sale section. Sombody out there must have two OIL caps of the same style. Lets put the "SWAP" back in swap meet.
I would also be interested in buying one marked OIL if this fails.
Thanks
Mark Masa
330-721-9344

153. pigstye13@aol.com message: WANTED:::::: I have a LEFT (timing mark side) 36-40 EL flywheel in great shape. Need to trade for equal condition RIGHT side flywheel for same 36-40 EL.Also looking for OEM front exhaust valve cover tin top (no chrome or repop) NOS idler and timing gear SHAFTS,NOS oil pump drive shaft,NOS or perfect used Original oil pump outer cover for the 36-40 type pump,and pack of (8) NOS valve keepers. Cash or 1930-1965 H-D parts to trade (903) 873-6644

152. dmk441@yahoo.com message: Wanted!!!!Dig through your Magnetos!I'm in need of a SPLITDORF Magneto it also has "E V" written on it, and 42 degrees, on it. I will take one in any condition, please email me with pictures and prices, thanks George.
Dave

151. hd36ohv@hotmail.com message: Would like to buy or trade for the AMA "Rules for Competition" handbook for 1936 and 1941. Copies are OK. I just need them to make vintage hillclimbers AMA legal.

Jerry

150. amca2475@earthlink.net message: WANTED!!!!!!!!INDIAN CHIEF FRONT CYLINDER THAT IS CORRECT, NOS, or very good condition and will fit('38-39). Base must be good, no repairs, cracks or rust out! L@@K at what i Have to TRADE: one INDIAN SCOUT 741 rear section, freshly done black powder coating by Cap's BHC the PREMIER Bright Hot Coatings Specialists. THE BEST PRODUCT and SERVICE on the West Coast! - if not the world! They use many types of media for stripping off paint and can do all other types of surface restorations. Metal is Steel shot blasted clean then coated black. Many other types of stripping available such as Garnet, Baking Soda, Glass Media, various types of shells such as Almond/Walnut,etc. and of course SAND for mostly non - M/C related projects. This INDIAN 741 SCOUT rear Frame section has all the tabs with rear brake cross shaft included.(*see pictures)Perfect for that stock bike restoration(change the color)or use as is for that bobber / chopper / Flat tracker / Racers use these to get the most speed out of there bikes,as this rear section is the lightest rear section of all the INDIAN Scouts ever made. Dependability plus Alignment is perfect for best transfer of power to the rear wheel also, if properly set up with the right combination of other scout parts such as motor/trans/rear wheel drive sprocket,etc.with this rear FRAME SECTION... NOT CHEAP! THIS IS NOT EBAY! Trade is the priority for NO$ INDIAN CHIEF FRONT CYLINDER ('38-39) +/or some interesting parts trades or may con$ider top dollar offers. More Pictures and detailed information to those whom know how to properly request. Ceramic coating for hi-temp exhausts and other items is also available if you want your bike to run as cool as possible. This Ceramic Coating will withstand 2000+degrees...Stay Cool this summer and help your motor last as long as possible,especially with those IOE "4" motors.

149. hd36ohv@hotmail.com message: For Trade: I have a very nice 1938 and up Harley Davidson knucklehead lower rear intake valve tin that I would like to trade for a lower rear exhaust tin of the same vintage. I guess I would also settle for either of the lower tins on the front head as well. The one I have extra is the short one and I really need to acquire either od the medium length ones.

Thanks Jerry

148. hd36ohv@hotmail.com message: For Trade: I have a very nice 1938 and up Harley Davidson knucklehead lower rear intake valve tin that I would like to trade for a lower rear exhaust tin of the same vintage. I guess I would also settle for either of the lower tins on the front head as well. The one I have extra is the short one and I really need to acquire either od the medium length ones.

Thanks Jerry

147. herzog@lakefield.net message: Looking for intake and carb for late teens Power-Plus. Thanks George

146. anthonytristram@aol.com message: wanted set of front forks 4 a puch 50 cheap plz son had a smesh on it bent the forks bit too fast 4 him hes only 6years old

145. btflat47@aol.com message: look for one windshield lower window(oem# 58022-50)and windshield upper window (oem# 58020-50).THanks George!!!!!!!!

144. jfb63@earthlink.net message: Wanted right side saddle bag for 1994 FXRP police bike part# 91003-84B

143. oldmtrcyc@aol.com message: Wanted: 1914 or 15 Indian twin motor. Thanks!

142. bdenman@charlotte.com message: The Little bike Harley-Davidson Model M125 or S125
this is a single displaced 125cc.
This is 1948 until mid 1950's.

141. hd36ohv@hotmail.com message: Wanted: For a 1934 Indian 4 - a Schebler DLX97 or I could trade for DLX 97 if I could buy a DLX51, DLX52, DLX65 or perhaps a DLX77. I have some misc. Scheblers for trade or also have Indian 4, HD knucklehead, panhead or shovelhead parts.

Thanks Jerry

140. indianfourdoc@aol.com message: Wanted- 1938 or 1939 Indian four- good basket or older restoration. Marty

139. indianut@cs.com message: wanted Indian 101 Scout rear brake/hub parts. Have nice 101 handlebars to trade. indianut@cs.com

138. jenningsauntieem@aol.com message: WANTED ONE GOOD USED TRANSMISSION SIDE COVER TO FIT A 1918 HARLEY THREE SPEED.THANKS JOE J.

137. jenningsauntieem@aol.com message: WANTED ONE GOOD CAM CHEST AND OIL PUMP COVER TO FIT A 1918 HARLEY MODEL F. THANKS FOR YOUR HELP. JOE J.

136. 48hdbob@fiberhighway.net message: wanted; NOS or excellent used 3571-38C oil return line,'38-'40 Knucklehead

135. jcsrestoration@cswebmail.com message: Wanted!!!Looking to buy a bunch of pre 1916 motorcycles, any condition, would prefer buying multiple bikes at one time, email me with photos and prices, thanks George.
Dave

134. pigstye13@aol.com message: WANTED:::: I need 4 NOS bolts. Harley Part # 4379 45 motor mount bolt 3/8-24 x 1 23/32" Prefer 1038 CP but 1035 CP will work,too
(903) 873-6644

133. garcia_r@msn.com message: WANTED: ORIGINAL Knucklehead, NO repro, must be OEM prefer a crusty, dirty, the older the better. Have ca$h or have items for trade. RAY 330-799-3738

132. fatdog@wctc.net message: Stop by and see our latest update march 1st!
www.fatdogvintagesalvage.com/

131. cc4319@bellsouth.net message: Looking for a set of right hand shift tanks with the shift linkage for a 1947 or later servi car.

130. jpaponne@yahoo.com.ar message: Wanted complete Indian Chief 1946 engine, thanks.

129. jpaponne@yahoo.com.ar message: Wanted complete Indian Chief engine, thanks.

128. kmstrade@aol.com message: thanks, looking for 22 HD engine

127. karimaria@yahoo.com message: Looking for service manual and parts for 1972 AMF Harley Davidson 175cc bike.

126. hd36ohv@hotmail.com message: I am looking for a 1934 (DCD) Indian 4 upper crankcase assembly or at least a good transmission and bellhousing piece to fix my original. I have some Indian 4 and Ace engine stuff and a 100 mph Corbin as possible trades and much HD knuckle, pan and big flathead stuff to trade or cash works too.

Thanks Jerry

125. chromespoke@hotmail.com message: 77. $100 REWARD chromespoke@hotmail.com message: $100.00 REWARD

Harley Hummer parts, basket case wanted! Top dollar paid! Im interested in your Harley hummer, scat, pacer, lightweight bikes and/or parts.
Im willing to pay $100, for 1,small, NOS Harley hummer transmission gear...the part number is 35051-59R Check your parts supply...If anyone can help, please let me know. May also be interested in a decent used gear, same part number, 35051-59R . Thanks George!

124. workforbikes@earthlink.net message: looking for thor frame.... 13 to 15 will work.

thanks george!!

123. jcsrestoration@cswebmail.com message: Wanted:Looking for hedstrom racing handlebars, an engine primer cup for hedstroms, also a 1912 Indian frame is needed. I have a 1915 Indian fork, a 1912 racer front rim, and a 1912 Indian two speed gear box for trade!!!Let me know, email with pictures & prices, thanks.
Dave

122. rita611@netzero.net message: OEM. NOs. 68603-62,68604-62 lt.&rt. mounting bracket. 50013-74A chrome jiffy stand assy. 65440-48 frontexhaustpipe. 65519-48A, 2exhaust port clamps. 68725-62, spot clamp moulding. Passenger foot rest bracket for 1962 FLH the part is hook shaped no OEM no. available.

121. driver426@yahoo.com message: need a set of stainless slider covers , ( cow bells) for 1949 fl oems only.

120. hd36ohv@hotmail.com message: Wanted for HD knucklehead: Low bore rear 74" FL cylinder and low bore EL 61" front cylinder - less than .030" oversize preferred. Would consider trading NOS rear EL 61" cylinder or have other pan, knuckle or big flathead parts to trade.

Thanks Jerry

119. sbyrd@iocc.com message: WANTED: 1929 45DL Parts: 18" clincher rims (front and back), air snoot (1406-29), front footboard support rod (2928-29), rear footboard support rod (2929-29), and seat bar (3106-29). (870)403-2808, leave a message if no answer.

118. giannifilangieri@shaw.ca message: Looking for 1937 Flathead big twin oil tank with banjo fittings please call (604)987 2840

117. dmk441@yahoo.com message: Wanted:Looking for any pre 1915 Harley parts: Tanks, forks, partial engines, frames, etc. will take rotted, or original paint. Also looking for a 1912 Indian Frame, please email with prices and photos, thanks.Dave

116. pcaputo@voitco.com message: looking for titled panhead cases or engine. thanks

115. jerrycul1903@aol.com message: I painted the Then Came Bronson 69 Sportsters & am looking for one to restore for myself There were 6 Sportsters I only want to find one. Bud Eakens tore them up as fast as i could paint them. If anyone knows anything i would appreciate any info. Thanks Jerry

114. thevetteshop@aol.com message: Wanted: Harley 1937 Big twin inner primary, 1927 New york license plate, #3 mesinger half pan or complete saddle. Any help is appreciated. Thanks

113. ddhowsmon@hotmail.com message: wanted 1947 ohio license plate good condition

112. g_skilton@hotmail.com message: I need rear cylinder for 1913 or 1914 Harley I will pay good price or exchange exelent 13 front cylinder, or like new 14 front cylinder,or later j part that you need.
Please email Geoff.g_skilton@hotmail.com.
Thanks George.

111. tcolby@springnet1.com message: WANTED: early- mid 1970's IRONHEAD SPORTSER stock parts...looking for original splined pegs/brackets ...internal wire handlebars...tach/speedo dash...and original rear and front fenders...please contact me at tcolby@springnet1.com if you have any of the above or other parts...TOM COLBY (oldpan*)

110. flovikholm@hotmail.com message: For Big Cheif 1927 mod I'm looking for following.
19B32X Transmission countershaft
16B6 Transmission sliding gear.
Front fender to 27 mod ( I have one for 22-24 mod)
Brake drum (rear)
Wheels/rims can also be of interest.

Hope some can help me.

109. dinar007@webtv.net message: i need info on tillotson carburator for harley davidson.where can i buy a rebuild kit? if anyone can help please e-mail me at dinar007@webtv.net thanks

108. ingulv.burvald@c2i.net message: For Reading Standard V-twin 1918 & 1922:Camgears, camlifters, handlebar levers.
Or any other R-S parts.
Also if anybody has present e-mailadress to previous e-mailadress:
lostA@mbari.org ?
Appreciate any answers.

107. bmj1393@sbcglobal.net message: Wanted WELBIKE, CORGI or INDIAN PAPOOSE Motorcycle..In need of Front Fender, Air Cleaner & Tires For Corgi MK1..bmj1393@sbcglobal.net

106. fredrik.lange@swipnet.se message: BT-offset handlebars 1946-48, clutch arm BT 40 up, Hydraulic damper unit for springer fork 46-52.

105. fauzi@excelcom.co.id message: Do you still have the oil feed pump for 45” (26203-37), what is the price plus shipment to singapore.

104. indian52@maine.rr.com message: indian52@maine.rr.com message: I'm looking for a dual carb. intake manifold for a 38 to 42 Indian 4 cyl. I know Indian didn't make them for these years, but I'm betting someone made one for a hotrod, boat, airboat, airplane or whatever. A friend saw one at Oley last year-but I couldn't hook up. Information would be a real help. Thanks George for a great site

103. yokot@olive.plala.or.jp message: I am looking for small port heads for 1939 knucklehead.If you have other parts for 1939EL, please contact to me.

102. workbikes@earthlink.net message: 1936 knucklehead cases... for trade.
what do you have that is 36? in the trade box.

A BIG THANKX GEORGE

101. hyperrevsports2@yahoo.com message: I'm looking for 36 EL knucklehead motors, cases, anything. Let me know.

100. carlcycle@nrctv.com message: I need an edison splitdorf mag for a 1942 wr. Please help me out, I have a lot of parts to trade along with cash. thanks in advance
Matt Olsen

99. portapotti@prexar.com message: I need one aluminum gear case cover with oil pump to fit a 17 to E22 Harley Davidson twin. Email or call David at 207 695 2500. Unit must be in good condition or better. Thanks!!!

98. panhead62@iwichita.com message: WANTEDFOR A PANHEAD OEM KICKER ARM AND A POLICE OILTANK BATTERY TRAY!
Have cash or trade? THANKS GEORGE!!

97. wilsoncattle@pldi.net message: i am looking for a early 54 wishbone frame must be original with all tabs in place thanks george

96. wilsoncattle@pldi.net message: i am looking for a early 54 wishbone frame must be original with all tabs in place thanks george

95. kmstrade@aol.com message: Looking for 21/22 HD engine/tranny.

thanks

94. knudandersen@post1.tele.dk message: Wanted Indian dispatch tow. Complete, basket or a rearsection (axle,rearframe and wheels) for an indian dispatch tow. Thanks from Knud

93. panhead62@iwichita.com message: WANTED 52583-68 and 525834-68 The brackets the seat springs sit on for a 65 pan. Thanks Geoge Thanks for looking DAVE

92. garcia_r@msn.com message: WANTED: KNUCKLEHED... Must be at least 95% OEM. The older the better.NO bobbers or choppers, looking to spend 18,000.00 to 20,000.00 Don't want an example with a bunch of K-Mart junk on it... looking for ORIGINAL. Have some things to trade, or cash . Ray 330-799-3738 Ohio

91. rita611@netzero.com message: Own a 1963 panhead duoglide keeping as original as possible always looking for any parts. Would appreciate any info. or offers as to where I can obtain parts! Thanks!

90. jcsrestoration@cswebmail.com message: Wanted:Looking for a large Acetylene Headlamp for a pre 1914 Indian, any condition, also looking for other available hedstrom parts, please email, thanks.
Dave

89. cc9dog@aol.com message: hi. i'm looking for a set of 57 FL cases, or just a good number side case, or even a basket case motor.. no rebuilt motors, case i'm sure i can't afford what you think it's worth.
also looking for a nice dash cover for the same 57 with the neutral light jewel.
also. there's guy on this wanted page looking for a 36knuck dash base,, well i have one. but it's gona cost ya, a complete horn for my 56 K model.
also looking for a skid plate and floor boards for a XA, have a nos XA horn mount and headlamp mount to trade. e-mail above address or fax me at 845-528-0139. and put 57 or xa parts in the subject. cause i delete address i don't know.

thanks george for the site

88. LYarham@aol.com message: Need parts for 1948 FL. Oil pump cover, speedometer lens with numbers and heads. Also need fork tubes for a 1971 FLH.

87. sales@victorylibrary.com message: Wanted: 1937 NY state bike license plate.

86. rjinright@comcast.net message: WANTED 45 motor running or rebuilt & ready to install.I have heads,carb,gen,& small stuff. thanksron

85. dexters@rea-alp.com message: I am looking for the compression reliece spring for late powerplus and early scout. It looks like a small shock absorber that are used on alot of early race bikes. I have pictures available. This is the last piece I need for my bike. Any leads would be greatly appreciated!!!!!!!!! Thanks George!!

84. llemay@swfla.rr.com message: Need Linkert M17L carburetor for HD 1942 XA. would buy pair if available.

83. rudy4536@aol.com message: Need part No.2238-35 Bell crank rod for a 1935 RL Have cash or a box of wrong ones to trade. Thank You

82. 48hdbob@fiberhighway.net message: WANTED:'63-'64 buddy seat,red and white or all white in excellent condition

81. 48hdbob@fiberhighway.net message: WANTED: 3571-38C NOS or excellent used oil return line,'38-'40 EL

80. shuvl427@comcast.net message: NEEDED WANTED REAR FENDER HINGE 3751-34 PLEASE CHECK YOUR STASH NEED TO FINISH MY FENDER THANKS

GEORGE THIS SITE RULES

79. oldmtrcyc@aol.com message: I need a rear cylinder for a 1913 HD twin. I also need cases for a 1915 HD twin. Thanks George!

78. herzog@lakefield.net message: DOES ANYONE KNOW WHERE I CAN FIND A FRONT FENDER FOR MY 1919 INDIAN POWER PLUS ? ANY LEADS APPRECIATED . THANKS GEORGE

77. $100 REWARD chromespoke@hotmail.com message: $100.00 REWARD

Im willing to pay $100, for 1, little, NOS Harley tranny gear...part number 35051-59R Check your parts supply...If anyone can help, please let me know. May also be interested in a decent used gear, same part number, 35051-59R . Thanks George.

76. chromespoke@hotmail.com message: $100.00 REWARD

Im willing to pay $100, for 1, little, NOS Harley tranny gear...part number 35051-59R Check your parts supply...If anyone can help, please let me know. May also be interested in a decent used gear, same part number, 35051-59R . Thanks George.

75. JOHNWILSONC@AOL.COM message: I AM LOOKING FOR A HARLEY SERVI-CAR YEAR NOT IMPORTANT. ORIGINALITY IS MOST IMPORTANT.

74. hdvelodrome@aol.com message: Wanted: Fork tube bushing puller for HydraGlide forks, and/or bushing reamer and/or fork bushing installation tool. Trying to replace tools old tools stolen by fools that probably have no clue what they were. Damn.

73. glazinray@sbcglobal.net message: Looking for dash base for my 36EL anybody got one? THANX GEORGE!

72. pigstye13@aol.com message: WANTED ASAP::::: I need one KR bearing cage.I have 3 of the 4 four cages. The o.d. 2.118. The i.d. is the 1 1/2.The 2 cages are .328 thick and the other rod cage is .472 thick.The cages use 5/16" rollers
I have the 2 thin ones and i thick one.I am looking for one thick one (measures .472 thick. Can ANYONE help me out here? Thanks for a great site George..........Mutt (903) 873-6644

71. cc4319@bellsouth.net message: Looking for a 1964-1966 Servi-car complete or basket.

70. cc4319@bellsouth.net message: Looking for a 1941-up flathead 45 solo frame.

69. grussek@aol.com message: Wanted brake anchor plate for a 1922 Indian Chief
Please reply to above email adress

68. als993@bellsouth.net message: 25-27 JD parts wanted especially complete front end.
please let me know what you have. I need alot.
also looking for pre 40s basket project.

67. erlebik@aol.com message: Whoever thinks "amca2475@earthlink.net" is a numbskull, please tell him! He thinks he is clever, but he is quite the retard. Thanks for the site George!

66. info@ace-ltd-usa.com message: I want one of every