126. fatdog1903@yahoo.com message: Have very nice pair of 25-29 JD clinchers, wanted to trade for a nice set of pre 25's. Thanks FatDog www.fatdogvintagesalvage.com
125. FAKEIT@BELLSOUTH.NET message: STILL LOOKING FOR 1939 HD TRANSMISSION OR GEAR SET.
124. amca2475@@@earthlink.net message: Indian CHIEF 1948 runs good,complete trans rebuilt.comes with other extra 48 chief parts cases,heads, cylinders,fork legs,links,handlebars,speedo,headlight,etc. to start another bike $20k, 1947 INDIAN chief CHOPPER done up in 1974,motor/trans runs,needs finishing,comes with extra INDIAN CHOPPER parts $13K. 1947 CHIEF stock almost complete basket with very nice frame(no tabs cut), Timmerman rebuilt 47 speedo,tanks, brakes,headlight,forks,wheels,etc.$10K .email - @@ ...serious call(559)348-1220
123. loikav@aol.com message: Wanted, all parts except shell for Indian Powerplus rear hub. Any condition. Literature also. Thanks George from Paul V
122. 100scoot+@+charter.net message:
Take a look at 1932 PAMPHLET
121. 100scoot +@+charter.net message: ONE MORE TRY
4 SALE1932 PAMPHLET
120. 100scoot +@+charter.net message: TEST ALSO
http://img5.ranchoweb.com/images/shovel100/000_2091.jpg
119. my46wl@yahoo.com message: I am looking for a tank set for a 1946 wl in good shape with trim.
Call Greg at 919-761-1201 or email me with a price,Thanks118. shuvl427@comcast.net message: iam still on a hunt for a set, or front, or rear heads for my 36 EL knucklehead someone help please there must be some out there ive been looking for a couple of years now HELP
117. info@ace-ltd-usa.com message:
Just testing
116. jdsal@telusplanet.net message: need parts for pedal clutch for 1913 hendee ,I do have some parts and also have some doubles I can use for part trade THANKS Jed
115. jsrestore@aol.com message: actuating arm and anchoring arm for eclipse belt drive clutch for 1909-15 american motorcycle.
114. loikav@aol.com message: Rear hub guts and brake band for 1918 Excelsior. Powerplus early or racing tank or parts. Thanks George.
113. phdinc@webound.com message: WANTED;;;; H-D SIDE CAR SHACKLE BUSHINGS PART #88314-37 PERFER NOS
112. richard.berchtold@power.alstom.com message: Iam looking for a knucklehead engine FL 74 CU inch. The engine musent be in perfect condition but more or less complete. Am willing to pay 5 K.
Regards
Richi
111. valron@atlanticbb.net message: WANTED: NEED A 74 CUBE KNUCKLEHEAD INTAKE MANIFOLD FOR STOCK LINKERT. I BELIEVE IT IS OVER 3.5 INCHES LONG. ANY HELP WOULD BE APPRECIATED. HAVE CASH OR SOME PARTS FOR TRADE. E-MAIL OR PHONE 1-814-749-8070 ASK FOR RON.
110. thug50@msn.com message: I am looking for a right hand UL engine case preferably 1941.
I also want a decent set of UL barrels with no more than 0.30"
over bore.I'll pay top money for the right parts.I'm interested in most U model enggine parts,can you help?109. ulfhd@gmx.net message: i realy need fore a 1915 hd twin,clutch hand lever straight,and footclutch pedal.i have cash ore trade.amca member 6170.thanks ulf from germany.
108. wallner@cslsoft.de message: `38 EL Knucklehead motor, cases or complete, matching,
ONLY correct and original #
will pay very good dollars
king regards
chris107. mvandolson@direcway.com message: Looking for a stock seat for a 1981 FXS Lowrider. Part no. 52499-80 (hi-lo split seat) black. This seat was used on other FX models from 1980 to 1984.
106. *garcia_r@msn.com* message: WANTED: Thin Strap OEM Harley Big Twin Front Fender, Must be straight and solid, no junk. Have CA$H or Trade 55-57 Straight Leg Rigid Frame.... needs work but I have seen MUCH worse. , Ray (330) 799-3738.Thanks George !
105. girardfox@aol.com message: Hello...Looking for the followin Henderson Deluxe parts: Luggage Carrier, Tail Lamp, U.S. Gauge Co. oil pressure gauge(20 or 50 lb.), gas cap, oil cap, Generator belt case, petcock, Handlebar sleeves,and a rear
stand latch. Ready to buy any or all of these items. Thank You!104. jbsb2@shawneelink.net message: 1931 VL parts wanted. I am looking for a good used, restorable VL sunburst face horn and a 7in. Motolamp headlight with the flat lens. Any help in locating these items either used or very good reproductions would be much appreciated. Thank you. John B.
103. wadellad@agi.ca message: i need a hydra left brake drum fork leg, i'm going to powder coat black so it dosen't have to be perfect. no turned legs please !! e-mail me thanks
102. ulfhd@gmx.net message: iam looking fore a 1912 to 1913 hd twin project,engine ore parts in any conddition have cash ore trading.
101. hd36ohv@yahoo.com message: For trade only: I have a NOS front WL fender that I would like to trade for a NOS front or NOS rear big twin fender of the 1937 to 1948 variety. My fender is black and does have a couple of small easily removed dings in it but it still is very nice. It is of the 1948 and 1948 variety.
I will not sell this fender because in the worse case I can replace the strap on it and use it on a big twin.
100. info@ace-ltd-usa.com message:
NOS NOS NOS NOS Harley Parts For Sale - Everything Listed is NOS:
WL Chrome Exhaust Stacks 65552-39 aka 11504-39,
Front Fender Tip 59215-57A,
Tail Lamp Outlook Lens (tombstone) 5063-47 (I have several),
Bag of 2 balls and 7 links for Cheese cutter - 91036-52 & 91038-52,
Speedo Cable out sheath for 1940's up Knuckle/Pan - 67026-36,
Left side rail for 58-64 Glides - 53417-58,
White Fender Flap for Sportster - 59242-60,
Private Stripes - 59879-51,
Sporster XLH and Sprint Ignition Switch - 71500-59A,
1949 Bigtwin stainless steel exhaust clamp - -49 Part#,
Rear bumper stancheons - 35170-47,
Cycleray lens "16" above the "Top" block lettering - 67731-35,
Bigtwin outer primary forward grease hole plug, the real thing NOT the hardware store specials! - no Part#,
Rear fender replacement hinge kits - 59853-48,
Rear fender replacement hinge kits - 59851-39,
Rear fender replacement hinge kits - 59853-58,
Dash reset cover - 71311-36,
Dash reset cover - 71311-47
Dash washer - 6466,
Headlamp door screw - 67714-47,
Handlebar grip retainer - 56235-47,
Hummer? jet screws - 27582-47,
Hummer rear cheese grater - No Part#,
Rear mount siren - 91126-67,
Saddle bag inner wire spreaders for BT and Hummer bags - No Part#,
Direction signal lamp dash - 68560-50 & 68559-50,
Sprint aluminum exhaust pipe finned clamp - No Part#,
BT juice brake pedals - No Part#,
Hummer part - 61314-47,
BT rear sprocket - 2049-36A,
Tach cable - 92065-74,
Hummer tranny part? - 34475-47B,
Rubber lamp gasket - 67755-47,
Throttle grip screw - 92971,
M50 Stop light bracket - 72001-65,
Hummer fuel line - 62358-47,
Hummer rear brake adjusting nut - 42265-47,
Gas tank strainer K Model? - 61601-54,
Case bushing / race - 24585-39,
Case bushing / race - 24610-39,
Case bushing / race - 40325-57,
Case bushing / race - 24600-55,
Case bushing / race - 24599-55,
Case bushing / race - 24601-55,
Generator brush set - 30425-51,
Generator brush set - 30425-32,
Unknown - 30392-58,
Motor pinion gear - 24010-39,
Star hub wheel star - 43566-35A,
Tranny idler shaft locks - 35216-26,
WL Crank pin - No Part#,
Points, incomplete - 32658-30,
Generator slinger gear - 1658-37,
Circuit breaker to coil wire - 1613-30,
Coil mounting bracket - 31725-48A,
Generator brush set - 31509-65,
Flasher kit, missing flasher - 68542-58A aka 68541-61,
Tranny reverse idler gear - 36141-41,
Tranny vent screws - 34723-47,
Tranny gear - 35275-41,
Tranny gear - 35294-41,
Box 10 carby gaskets -27410-39,
Bushing 35322-38,
Oil pump gear - 26320-52,
Oil pump gear 45 - 26320-37,
Cam gear bushings - 25285-37, 25590-37, 25591-37,
Rollers STD - 305-15,
Rollers and cage set .0008 - 24654-54,
For more info call Pete at 603-396-8355 or email your list. Thanks George!
99. pigstye13@aol.com message: Looking for any of the following NOS ONLY. No used or repops.
2260-41 side cover, 2513-41 clutch gear,2270-41 top cover
2272-41 main shaft, 2300-41 countershaft & 2242-40 shifter lever/shaftHave many NOS and used OEM HD parts for most models from 1936 to 1965 or cash (903) 873-6644
98. gw_motorcycles@hotmail.com message: Hi everyone, looking for the following parts for a '65 Panhead: Saddle Bags, Saddle Bag Rails, Mufflers, Left side Tank Emblem, Air Cleaner Cover and a Rear Fender. Please include pics with price, all parts must be original and in at least very good condition. Will do cash or have trade available for many H-D models.
Thanks,
John Barrack97. DANPATCH@PLANETKC.COM message: NEED A INLINE SPRINGER ONE INCH NECK FOR A 41 -46 HARLEY PAINTED NOT CHROMED CALL DAN 913 268 5314 CELL 913 515 3721
96. tnasheldon@msn.com message: WAGNER motorcycle, made in St. Paul, MN from 1901-1912. Wanted: any motors, frames, sheetmetal, ads, sales lit, postcards, promotion items, etc, etc. Let me know if you have one, I have a list of known Wagners (over 40). Also, anything on Minneapolis, Michaelson, Thiem, Joens, Cyclone, Comet, Eagle, Armac, etc (any old bikes with a Minnesota conection. Also wanted any Minnesota motorcyle license plated for 1909-1949. Let me hear from you.
95. mrwhitepipes@yahoo.com message: I am looking a stock legenth, reasonable condition, harley VL or RL I-beam springer rear leg. I only need the rear leg as I am making my own "I-beam style" front leg. I can't afford mint condition and don't need it for this project. Somthing needing work is fine. Willing to pay up to $400 depending on condition. Thanks, Andrew
94. alfaman8c@aol.com message: 1931 101 Scout. Anyone out there got a horn, chainguard, toolbox or battery box for a 1931 101 Scout? Cash waiting. Thank you.
93. jeffw3333@aol.com message: 43 Indian Scout seat and headlight, exhaulst.
46 Chief Sidecar w/ frame, any condition. Fiberglass reproduction okay. Also need Motor, Trans and title for 46 Chief
92. yorgtat@hotmail.com message: Looking for a right side 47-48 UL flathead tank,Gen-oil type dash.....if you have one please mail me......thank you
91. bobrakestraw@comcast.net message: Wanted proper tank for 26 Scout. Have same year Chief tank to trade. Also need 41-46 Knuckle tanks, have 38 up Chief tanks to trade. 41-45 HD BT frame ,have straight 48 frame[loops, tool box,rear stand tabs gone] to trade up or down.Need 53 Chief frame can trade 46-48. Need Trumpet horn for Sportster.Also left 47-50 Pan tank . Thanks
90. nonne2@hotmail.com message: 3,5 gal. GAS TANKS ...black painted with vintage patina !!!!
I`m looking for a matching pair of 3.5 gal. tanks with left side tankshift. They must be black painted with old patina...meaning worn off paint,schratches and surface rust.The model is of minor importance also if the paint is original or garage made...it just has to be old. Why I`m so specific about this is that the tanks must match my old panhead.I`m also searching for an old worn set of grips for the springer handlebars.
Cheers
Rino Kristiansen
89. indian@indy.rr.com message: Any American Bikes or Parts wanted. Four cylinder bikes and parts also. Have Cash and will travel. I have very good references as well. indian@indy.rr.com
88. reinvoskamp@yahoo.com message: I need an original FRONT cylinder for a 74 knucklehead.Must be able to hone/bore it to + 0.060 oversize.Not sleeved.
thx Rein (netherlands)87. pan54dd@aol.com message: searching for a late 38 early 39 big twin foot clutch lever, please send pics if availible, thanks for any help.....Dave
86. TOWNSANITATION@MSN.COM message: LOOKING FOR 1949 PANHEAD LEFT SIDE FUEL TANK.
85. empiremil@aol.com message: WANTED: 1937 NEW YORK MOTORCYCLE PLATE. ANY CONDITION CONSIDERED. PLEASE SEND E MAIL TO empiremil@aol.com OR CALL 631-584-6038 9:00AM TO 9:00PM(EST).
THANKS, STEVE (LISTED 11-13-05)84. ajjameyer@comcast.net message: Looking for 38 - 42 Indian four. Complete, project or parts.
Please contact me at ajjameyer@comcast.net83. laro@ap.net message: Looking for:1965 flh Harley-Davidson saddlebag guard rails.
82. indianchoutracer@yahoo.se message: early carb bowl for linkert in aluminium with the marking 7-64 inside, ohv typer or sidevalve.
81. gerrard@wanadoo.nl message: Looking for a rear cilinder for a Harley model J, 1925, 61 cui.
80. hayden_hell@comic.com message: original MINT Harley Davidson big twin rigid frame oil tank 1938-1957,
a Harley Davidson big twin right hand shift crossover bracket (this is located on top of the rear motor mount)79. hayden_hell@comic.com message: original harley davidson rigid frame big twin oil tank 1938-1957
78. fbac@familynet.net message: WANTED: 4 bolt Linkert at a reasonable price.
TRying to engineer a dual carb setup for a dirt bike..
Anybody help?
Thanks
Gene
77. bobrakestraw@comcast.net message: wanted 53 Chief frame [CS 4digit# prefered] 27-31 Scout cases. 101 tank.front forks. I have 46,47,48 frames and tanks for trade Bob 209 217 7495
76. pbpop58@hotmail.com message: NEED 1948 PANHEAD single carb HEADS
putting my monster together waited a long tome to take this ride
DONT want to wait any more
Pete75. 100scoot @charter.net message: 41 wr cam cover needed
remove the spaces from the email addr to contact me
74. drnorah@centurytel.net message: 1941 Knucklehead engine cases.
73. casskuzba@wishd.com message: Wanted stock or near stock 1978-1980 FXS Lowrider
72. pigstye13@aol.com message: WANTED:::: I need a couple of decent Linkert flathead type float bowls.No junk please. Cash or trades.Thanks..................Mutt
(903) 873-664471. jerite@hotmail.com message: I am stil looking for a Pan or Shovel Project. Ideally an FL of some type. Been looking dilligently but just cant find anything reasonable. PLEASE HELP!!!
70. shuvl427@comcast.net message: i have a 36 knucklehead that in is dire need of the correct front and rear heads, please help!!! someone has to have a pair or single one layind around colecting dust thanks.
69. indianchoutracer@yahoo.se message: 42-46 original beehive taillight.
68. emanuelpfister@hotmail.com message: Hello
i have a 1948 Pan in barn fresh condition . for make the bike perfect i search original harley enamel paint . i search original flight red ... 1 pint or more ... please help me i will pay all works .. best greetings from switzerland harley driver...67. pbuck@nexicom.net message: I am looking for Tank Badges for a 1968 White Motorworks 250 SS Motorcycle. I have completely restored the bike from the frame up, but am missing a tank badge. Anyone have one? I can send a picture of the badge if it will help.
66. jcsrestoration@cswebmail.com message: Wanted: THOR headbadge, also teens bicycles made by Hendee, Pope Merkel, Thor, Pierce, Emblem, Dayton, Davis sewing machine company, Harley, Reading Standard, etc. also looking for early pre 1930 bicycles and turn of the century models, barn fresh is fine. Email me if you have one lying around, Thanks George.
Dave
AMCA#138865. vtwinrebuild@yahoo.com message: Wanted...Early Servi Car kick starter parts. Need part #2105-32 starter crank shaft and #2109-32 starter shaft coupling. Thanks George... email... vtwinrebuild@yahoo.com
64. knucklfrank@aol.com message: NEED Original Springer Top Clamp 56119-49 inline with 7/8" ears, seem all the aftermarket clamps have 1" ears and my stock 56127-49 clamp post wont fit as they are set up for 7/8" ears. frank
63. shuvl427@comcast.net message: Wanted a set of 36 el heads a front and a rear have indian,harley,super x,henderson parts to trade
62. redfern@acmeaust.com message: Wanted, rear exhaust pipe and muffler ( 1 piece ) for a 1981 FXWG Flame Glide.The part # is 65603-80. Thanks George! My email address is redfern@acmeaust.com
61. redfern@acmeaust.com message: Wanted, rear exhaust pipe and muffler ( 1 piece ) for a 1981 FXWG Flame Glide. Thanks George! My email address is redfern@acmeaust.com
60. jcsrestoration@cswebmail.com message: Wanted:Early Teens Thor parts, will consider in any condition. Email me with prices and a photo, thanks George.
Dave59. yafer@shasta.com message: Need tanks for 1934 Harley model C single; (D models, and R models, and earlier singles, the short ones may work)give condition, cash price, and phone number; Thanks George
58. fbac@familynet.net message: Need Upper Tree-(Adjustable) for a 59 pan p/n56129, and tabs p/n45752.
Cover for above p/n45741
Tabs for lower stem p/n45710Thanks
Don57. mvandolson@direcway.com message: 1974 FXE SUPERGLIDE AMF GAS TANK DECALS (any color of stripes). I have the AMF HARLEY DAVIDSON gas tank decal, but need the stripe decals that go above and below the AMF decal. STOCK 1974 FXE SUPERGLIDE SEAT (any condition).
56. duda@rduda.com message: Wanted, Harley CUTS & MATS, this was the original advertising sent to dealers for them to use in their local newspapers. I am looking for these please call 802-888-7689 or email
55. jimvan"@"flash.net message: I'm looking for an original battery box cover for a teens Harley. This style is approx. 4" X 5" and has two small holes on opposite corners of the top. To respond, remove the "quotes" from around the @ in my email address. Thanks, Jim
54. indianspanner@bigpond.com message: wanted. Splitdorf mag-dyno to suit Indian powerplus
53. blackbomber65@hotmail.com message: Wanted Original hd springer fork....offset would be good but will take a inline .Must be in good orig shape , no chopper weld ons or rebends . Thanks alot , really need this for my frame .....thanks all !
52. indianchoutracer@yahoo.se message: 1938 knucklehead oil pump or oil pump housing in good condition. Has 36-37 pump for trade i likewise condition or other interesting trades. Also looking for a 36-48 horn grille.
51. jim@guidera.com message: Looking for a gas tank mount for a Corbin Speedo for 1926 J.
50. shuvl427@comcast.net message: still looking for a set of 36 knuckleheads need a front and rear cant someone help
49. bluedog5@cox.net message: Wanted Excelsior motor15-19 also 36 knucklehead parts early cam cover, have many parts for trade indian , harley , henderson
48. djfitz@ocslink.com message: Looking to buy 1938 Indian Chief or Sport Scout project bike. Prefer unrestored, but will consider older restoration. E-mail djfitz@ocslink.com or phone 309-645-4623
47. meredithmcg@gmail.com message: 1967 Washington motorcycle license plate. All offers considered.
46. vintagespeed1955@swbell.net message: WANTED: 1913 or 1914 cam cover for H-D single...any help or leads would be appreciated.
Thank You George for the great site!45. jsrestore@aol.com message: WANT- hedstrom gear case for magneto 09 -15 also parts for crouch 1906 / original indian diamond frame,thanks
44. shuvel427@comcast.net message: desperate need a set of heads front and rear to complete my 1936 el knucklehead
43. jokerman115@aol.com message: Wanted 1930 or about harley twin project hopefully running but will consider anything mostly complete.
42. danmargolien@yahoo.com message: Need a pair of intake valves and keepers for a '26 JD. Also need a timer body and shaft- the type that takes the rotor. Also the coil and coil cover. Thanks!!
41. jmw_50@hotmail.com message: Wanted:1912 Hedstrom Indian engine mainshafts, any condition for samples to copy, rusty or damaged OK, both 3/4" diameter, timing side with integral gear teeth, for copying. To buy or borrow. U.K
40. Hooper167@cs.com message: YALE. I am looking for a 1914 Sales Catalog for a Yale twin. The original or a copy is O.K., its the information that I need. Any help is greatly appreciated. Bryan
39. gwellin((@))yahoo.com message: Need Harley 50-57 Panhead front fender for restoration. Must be in very good condition. Remove (( )) in e-mail. Thanx George
38. jcsrestoration@cswebmail.com message: Wanted: Pre 1910 Indian single motor and other parts. Email me if you have some early Indian stuff, thanks George.
Dave AMCA#138837. jamesinman@comcast.net message: Wanted. Goodyear 5.00x16 tire with diamond tred pattern ("Aero tread")
Jim Inman (209)334-263236. DANPATCH@PLANETKC.COM message: WANTED 46 47 48 OFFSET BIGTWIN ONE INCH SPRINGER CALL DAN 913 268 5314 ALSO 47 -50 HARLEY TANK BADGES
35. llwauto@aol.com message: wanted 1925 indian scout motor and trans ,and wheels
34. llwauto@aol.com message: wanted 1925 indian scout motor and trans ,and wheels
33. hensteveamc@aol.com message: Need 1928 to 1935 sidecar step plate part no. 6470-28. Either original or Merle Wolfe repro OK. Email or call (603) 585-7188. Thank you George.
32. pigstye13@aol.com message: For Sale or trade.
I have a NOS very rare 1935-36 RL rear brake drum with sprocket with perfect original paint.Honestly believe this could possibly be the only one left in existance.I don't have a RL, so I have no use for it,but I am sure some one does.Would trade for a NOS 41-52 WL rear drum w/sprocket,NOS 41-64 45 cluster gear, linkert float bowls, or I'll take $150 plus shipping for it. Thanks (903) 873-664431. trainnut@northnet.net message: looking for a riders hand book for a 48 servicar.
30. vtwinrebuild@yahoo.com message: Wanted: NOS 1964-65, 1966-73 Servi Car electric starter parts only. part numbers, [31491-64 Pinion, starter shaft], [31487-64 Rubber Cushion, starter shaft, [31494-64 Anti-Drift Spring,starter shaft, [31490-64 Pinion Washer, starter shaft, [31497-64 Spacer, starter shaft, [31486-64 Spacer, starter shaft, short, [31425-66 Shift Lever, starter gear. Email me at: vtwinrebuild@yahoo.com
29. bowlesjeff@hotmail.com message: nerwin@bigpond.com this is a bad email address get back to me and i will see what i have
28. nerwin@bigpond.com message: 1957 Sportster headlight shroud
any other parts associated with same bike27. jerite@hotmail.com message: CAN ANYONE HELP A BRO OUT WITH A PAN OR SHOVEL BASKET/PROJECT? PLEASE RESPOND ASAPIF YOU CAN!!!!
26. emanuelpfister@hotmail.com message: Hello I search original flight red paint for my 48 - er pan .. i want the paint job with original paint ... please help me to complet my bike ... greetings from switzerland ... and thanks gorg for his page ...
25. wadellad@agi.ca message: i need a panhead bottom end ( bottom case with flywheels, rods, gears, etc.) i don't care if it has blown cases or title, i just need the guts. i'm also looking for a 4 speed trans case. thank guys
24. girardfox@aol.com message: Looking for U.S. Gauge Co. oil pressure gauge for 1922 Henderson Deluxe.
Must have 20lb. markings.
Thanks.23. okkie2@hotmail.com message: Looking for a complete upper clamp assambly for my '58 later tow bar
Shipping to Amsterdam Netherlands22. jmw_50@hotmail.com message: Wanted: Old Hedstrom Indian engine mainshafts, any condition for samples, rusty or damaged OK, both 3/4" diameter,timing side with integral gear teeth, only for copying. To buy or borrow. U.K.
21. spinner@eim.ae message: Wanted. Panhead motor. 1958 thru 1962. All options considered. Thanks.
20. sales@motorcyclerescue.nl message: looking for Lefthand throttle grip 56220-58 for right hand shift servi cartanks. thanks jack
19. mtullberg1762@yahoo.com message: WANTED 1916 Indian power plus schebler DLX 11 carb,and a Mag that will work, also need kicker assembly, would prefer comp engine,any year power plus 61 cu Inch preferably in the mid west. Also interested in any power plus parts, What do you have, will buy large or small amount. Thanks to you George for a great site , Mel
18. indianchoutracer@yahoo.se message: 1938 knucklehead oil pump or oil pump housing in good condition. Has 36-37 pump for trade i likewise condition or other interesting trades.
17. s.w.gilbert@DL45Homepage.com message: Hey people, anyone out there possibly have a right (brake)and left (clutch) complete sidebars for a 1932-36 RL. Any leads would be appreciated!! Thanks, Stephen Gilbert DL45Homepage.com
16. wrenchead62@aol.com message: WANTED! 70's era flat track motorcycles and or frames, HD, rotax and others considered, 250cc to 750cc
15. 33vle@optonline.net message: Looking for Bosch Magnetos for Harley twins (45 deg)...
Looking for cam covers for 12-23 twins, cam chests...
Will also look at pre 16 twin and single motors,cases,parts...
14. talktojon@aol.com message: WANTED: *PowerPlus* Outer primary cover (tinware),Compression release lever, Clutch parts.*Prince* Battery Box, Tail light lens. *32 Scout* Headlight,Generator cover(Tinware). Thanks!
13. pigstye13@aol.com message: WANTED:
Does anyone out there have any Harley flathead Linkert main nozzles? I need about 5 of them. Have lots of Linkert parts to trade (pivot screws,float bowl top screws, levers,shafts,springs plugs,discs,screws,etc,etc).
Hope someone can help me out here.Thanks
Mutt (903) 873-664412. impala18969@yahoo.com message: Looking for a 4 speed transmission for a 1970 thru early 1978 FLH. I am located in the Philadelphia Pennsylvania area. HELP!
11. bcorey@colourcity.com. message: Wanted Source for obtaining N.O.S- REPRO- S/H ,VENTURIS to suit 1.1/4 schebler deluxe carburetors. cheers.
10. carl399@msn.com message: Henderson engine or parts 1917,1918,1919.
Have manny American parts for trade!!!
Carl9. cbguns@comcast.net message: Hello
i ned help
i just found a 1929 harley model D
i need help and a s*** load of parts
any help woul be greatly apriciated
thanks
chris barry
wilmington ma
508-954-7840
cbguns@comcast
THANKS AGAIN8. info@trinitymotorworks.com message: WANTED: Just purchased an Indian 101 Dispatch Tow. NOT FOR SALE, but am looking for information. Any factory Information on Indian 101 Dispatch Tows. Any photos, parts or additional Information that you may have. If you do not want to sell your stuff, copies are fine. CASH PAID. Pics and some information of the bike I bought will be on our website this upcoming week. www.trinitymotorworks.com
Thank George7. work 1000 @eathlink .net message: wanted cleveland four cyclinder parts.. anything.
to email remove the spaces between the words on the email adress.
thanks6. darbone85737@yahoo.com message: NEED... original 5 pole ignition switch to fill the last remaining hole in my UL dash. Keys not required. Help me get this thing back on the road in time for the Toy Run
Thanks
Larry in Tucson
5. btflat47 "@" aol.com message: I have a real sharp and beautifull 100% original deluxe seat correct from 1952 to 1954 to trade for a 1947 to 1949 original deluxe seat(rosettes are dark green on the bottom ,yellow on the top)
Need info just let me know.If you are serious i can send accurate pics that hide nothing.To email me please remove spaces and " " around @ to avoid spamming.
Thanks Georges
4. carl399@msn.com message: Berling magneto, model E41.
Thanks3. gerrard@wanadoo.nl message: Hello, i,m looking for a rear cilinder for a model J Harley davidson from 1925, 61 cui. The cilinder I have has a crack in the exhaustvalve
hole. Do you know any? Others defects no problem.
Thanks,
Gerrard Kijk in de Vegte
Holland
Tel 0031 615075685 gerrard@wanadoo.nl kijkbouw@hetnet.nl2. mstrbreze@earthlink.net message: wanted 2 into 1 header pipe for 1972 or 71 harley fx superglide,NOS or GOOD USED
1. pamplonab@aol.com message: wanted nos front fender for a 1934 to 1936 vl
September 2005
123. gpardos@ix.netcom.com message: Wanted HD external contracting brake for 1917 Twin.
122. dexters@rea-alp.com message: I need a rear stand for late powerplus or scout. This is half round stock much like the early powerplus without the extra leg. Also a chain guard for early scout, inner and outer primary cover without the generator gear cutout, clutch pedal with solid heal and a Messinger Auto Cushion Superba #2 seat. This seat comes with two exta straps for support. Any leads would be appreciated. Thanks George!
121. ricbolduc@comcast.net message: Looking for a starter crank spring for a 1917 Harley J - repro is OK.
120. pigstye13@aol.com message: WANTED:Does anybody have a NOS 68673-38 Big Twin SH2 spot lamp gasket for sale of trade? If not, does any one got a repop gasket for the same lamp (as long as it fits correctly)? (903) 873-6644
119. jdkljennings@adelphia.net message: HELP I NEED A SET OF SIDECAR SPRINGS TO FIT A 1918 HARLEY SIDECAR ALL FOUR OR WHAT EVER YOU MAY HAVE.THANKS JOE
118. rconti@ipsdb.com message: Need a Rear, late model 46'-47' Knucklehead rocker box in good usable condition. Have an eary one, will give to anyone offering me the late model. Thanks Rich..... & thanks to you George !
117. vvmc_usa@comcast.net message: need a front head for a 36 knuckle
116. cknoop36@hotmail.com message: Pierce Single parts wanted.
Have some early trades.
Thanks115. DANPATCH@PLANETKC.COM message: WANTED BIG TWIN OFFSET SPRINGER CALL DAN OR EMAIL 913 268 5314
114. carl399@msn.com message: EMBLEM 1917 - 1920, interested in absolut all parts for this motorcycle.
Carl in Denmark
Thanks George!!113. Indian_29@hotmail.com message: Harley approx. 1920 hand brake lever assambly wanted. Have very nice early 20's Indian brake lever assambly for trade.
112. g_skilton@hotmail.com message: WANTED Eclipse front hub 36 spoke 2 1/4 inches flange diameter with good (useable) races or new repro,
Thanks.111. indianmotocycle@gmail.com message: Wanted: Anyone out there have any wood rims for 1902-1906 Indian Camel backs? They are wider than most bicycle ones and the rear is 40 spoke and front is 36. I saw a pair a few years ago at Oley or Brookfield someone was selling but can not remember who had them.. Anyone have a better memory than me?? Thanks for any help.. Email indianmotocycle@gmail.com
110. jcsrestoration@cswebmail.com message: WANTED:Nice Complete 1913-14 THOR Single engine. Pre 1910 american made motors as well, shoot me an email, AMCA #1388, thanks George.
Dave109. hd65flh@aol.com message: Looking to sell or trade for 49 pan heads. Have 48 heads that need seats reworked as well as exhaust flanges repaired. Head Hog Vintage M/C does the repair work and are supposed to be good at it. Have a set of 50 heads that I am pulling off a 49 motor also for trade. Can send flicks via aol snail mail.
Thx. Dave Newman108. garcia_r@msn.com message: WANTED: Delco Remy model 16 9 bolt horn, must be complete and working.... cover not inportant. Have Horns to trade, Indian , Harley. or CA$H. ALSO ANY EARLY KNUCKLE TANKS, FENDERS.
107. h4west@comcast.net message: h4west@comcast.net message: I am looking to buy a set of orgional HD pan or Pan/shovel cases with or without flywheels. E-Mail me or I Will be at the Jefferson PA. Swapmeet on 9-30 Thank you, Mark
106. info(((@)))beautyofspeed.com message: Looking for a WL FRAME, prefer a 1950s style but I'll take whatever year I find. No junk, I'm willing to pay the price but I want a nice frame. Located in europe so would prefer finding one on this side of the ocean. Remove the ((( around the @ to email me. Thanks, Eric.
105. riderhank@yahoo.com message: WANTED Original rear fender for 62 duo-glide
104. pigstye13@aol.com message: Wanted: one 1948 Panhead front head. Don't need rockers/blocks/valve springs/etc. No cracked broken sunken seat junk need apply.Thanks (903) 873-6644
103. fakeit@bellsouth.net message: WANTED:: (2) TRANSMISSONS FOR 1939 BIG TWIN. ONE YEAR ONLY SHIFT PATTERN.
102. gpardos@ix.netcom.com message: Wanted.Rear external brake for 1917 J HD
101. iowashovel@earthlink.net message: I need two - NOS single button, two wire handlebar switches like the ones used on a 1967 FLH. Also can anyone put me in touch with Jeffs American Classics?
100. dexters@rea-alp.com message: For sale; 1917 Indian Powerplus project bike. Reasonably compleat. Engine has compression, good tanks, Troxel seat and many other hard to find goodies. What is missing for parts are available. Great project to restore or leave as original. Email me for pictures.
99. h4west@comcast.net message: I am looking to buy a set of 1966-1969 Pan/shovel cases with or without flywheels. E-Mail me or I Will be at the Jefferson PA. Swapmeet on 9-30 Thank you, Mark
98. h4west@comcast.net message: I am looking to buy a set of 1967-1969 Pan/shovel cases with or without flywheels. E-Mail me or I Will be at the Jefferson PA. Swapmeet on 9-30 Thank you, Mark
97. graham56@esatclear.ie message: looking for 95th anniversary timer covre for 1340 evo
96. mscottharley@sasktel.net message: WANTED-37 knuckle rear rocker box,37 knuckle front head,36-37 big twin clutch foot pedal,29-34 Harley 45 trans case. 37 only Indian dimmer switch(knurled)Cash or trade.Scott 306-757-7982
95. jdkljennings@adelphia.net message: i really need a set of sidecar springs to fit my 1918 harley sidecar does anybody have any springs for sale or trade? thanks
94. dismaldreams@sbcglobal.net message: Need 1965 PANHEAD*** front cylinder OR BOTH (FACTORY/STOCK ONLY PLEASE). Must be no more than .020 over bore. No broken fins and/or weld marks.
93. mot54@aol.com message: $$WANTED$$-ORIGINAL PAINT 34 VL TANKS BLACK&RED,ORIGINAL PAINT(MAROON) 34-39 INDIAN CHIEF GENERATOR BELT GUARD,ORIGINAL PAINT(MAROON)LEAF SPRING PACK FOR 36 CHIEF,ORIGINAL 30'S INDIAN SADDLEBAGS,FRONT CYL FOR 35-36 CHIEF PLEASE CALL OR E MAIL!!406-434-2005 THANKS!
92. h4west@comcast.net message: I am looking to buy a set of 1967-1969 Pan/shovel cases with or without flywheels. I Will be at the Jefferson PA. Swapmeet on 9-30 Thank you, Mark
91. wolfebike@mchi.com message: Wanted:
Original paint motor cycles made before 1936. Must be nice. I want to colect one bike from every manufacrturer and each year. I will pay up to $2500 CASH for the ultrarare. I know some of you old fellas got some in your storage, so give me a call while the prices is up.
Mike Wolfe90. g_skilton@hotmail.com message: WANTED Thor rear hub with rear wheel clutch for Harley or any parts,also I need to buy rear cylinder for 13/14 Harley or trade for front cylinder, any other parts 12/13 would also be usefull for my project. many thanks.
89. dixchief@gmail.com message: Wanted: front cylinder for 1936 Indian chief. Thanks George
88. tcob013@bellsouth.net message: Looking for a basket case 1957 service car. Ex sold everything while i was over in the middle east, any lead's would be great. God bless the USA.
87. pigstye13@aol.com message: Looking for decent used OEM HD horn buttons (the whole assembly )Need a pile of them. Parts to trade or cash. Thanks (903) 873-6644
86. rnlind@westriv.com message: WANTED front leg for harley springer frontend with the number 7 or 8. Will pay cash or trade for 13 or 15 + $$. Thanks!!
85. fixman@adelphia.net message: I am looking for a dead 6 Volt battery that I can cut open to insert a smaller sealed battery. I did it before for my 45, but it went with the bike when I sold it. I recently got a 57 Pan, and want to go the sealed route. I will be happy to pay you for the dead battery and, of course, shipping it to me if you have one around. Thanks George.
84. jcsrestoration@cswebmail.com message: Wanted: I need a gas tank, mechanical oiler, handlebar control sleeve and piston for a 1914 Thor Single 4 HP. 1913 Parts would work also.Thanks George.
Dave83. jsrestore@aol.com message: LOOKING FOR Magneto Drive / timing case for 1909- 1915 Indian also original Gas / oil tanks ,,thanks George!
82. garcia_r@msn.com message: WANTED: Harley Springer rear leg for pre war big twin, the brazed type not welded. Must be OEM NO JUNK PLEASE. Will have a MINT 1940 and up one to trade. Will pay CA$H but not a kings ransom. Thanks George.
81. RONNIE.BRACKE@BELGACOM.NET message: I am looking for an unrestored or unrestored project pré 1914 Indian motorcycle for sale.Have an unrestored Belgium fast running 350 O.h.v bike in exellent preserved condition for part exchange if wanted. Thanks George! Best wishes from Ron.
Con artists, please don't react!80. colw@bsa.qld.gov.au message: 1912-17 Harley single cylinder inlet cam. This cam is part of a two stage timing gear with 48 and 36 tooth gears. Also need 24 tooth drive gear that goes on crank shaft. Help very much appreciated.
79. meerkt42@softcom.net message: Wanted parts and/or information on Bremer Mini Scoot.
August 2005
78. jerite@hotmail.com message: I AM STIL LOOKING FOR A PAN OR SHOVEL BASKET OR ROLLING CHASSIS PROJECT! IDEAALY AN FL OF SOME SORT. I HAD TO SELL MY 52' LAST DEC FOR REASONS(FAMILY) BEYOND MY CONTROL AND I AM NOW DYING TO WRENCH ON SOMETHING! I KNOW SOMEONE OUT THERE CAN FEEL MY PAIN! PLEASE HELP A BRO' OUT! THANKS - JER
77. kurtkstm@atlantic.net message: 65 Pan engine or cases. Henrietta Evan at DE's cycle has not produced the engine I paid cash for 3 years ago. Thx.
76. kurtkstm@atlantic.net message: 65 Pan engine or cases. Thx.
69. bigarmsmalloy@yahoo.com message: I am looking for a WWII German/Russian motorcycle with a sidecar to restore. Any ideas where to find one these days? Also, I'm assuming a lot of people have done this, so are there any recommendations to a model? Thanks
68. pigstye13@aol.com message: WANTED. I need a good picture of an original Hi-Fi Green Panhead or K model. Can anyone help me out here? Thanks
67. hogluvr1340@yahoo.com message: Wanted: Seat T-bar for Harley
66. dextes@rea-alp.com message: Looking for a rear stand for a later model power plus and a Dixi 42 degree mag. Any help appreciated. Thanks George!
65. ronnywitt@t-online.de message: I'm seeking for B&H Footshift unit for Harley-Davidson 4-Speed Gear Box
64. jsrestore@aol.com message: WANTED FOR 1911- 14 FLANDERS,, HANDLEBARS AND FLAT BELT ECLIPSE CLUTCH
63. wwh396@yahoo.com message: I know that my bike is not vintage but I need help. It is A 1982 xl 1000 I need a motor for it the lower end is making lots of noise and no one around here works on them. Please help if you can Thanks Wes
62. iriengr@hpnts.net message: Would like to buy a VL frame that has been modified to accept a knucklehead engine. Prefer stock rake and neck. Appreciate any leads or information.
Thanks61. bakermaker@tds.net message: armac motorcycle info & parts wanted.
60. captchebur@global.net message: Need right side footboard bracket mount & brake pedal for 1919 HD model J.
59. jurassicracing@rushmore.com message: wanted...........cam cover for a single cylinder MERKEL engine,will pay your price,any condition considered.i have some parts for the one year only {1910}oil pump,and the cast bracket that replaces the mag and holds the battery box and timer,for battery model{1910},only one i've ever seen.thanks
58. dexters@rea-alp.com message:
Looking for a good useable 42 degree Dixi magneto. Prefer one that is hot but would concider one that is rebuildable. Thanks George!57. mhackler@kc.rr.com message: Looking for a 1980 cb750c custom gas tank in mint condition. contact me at mhackler@kc.rr.com
56. bradleydogg@zoominternet.net message: Looking for a set of STAINLESS valve covers for my 53 Pan project.
Must be in good shape / no dings or dents...54. jim@kiesler.net message: Need to purchase, rent or borrow to copy harley knucklehead saddlebags 36-42 can use even one side for pattern
53. hogluvr1340@yahoo.com message: Wanted: Seat Plunger (pogo stick) and seat T for '56 Pan, I was told any year Big Twin setup will work. Thanks...
52. jfundy88@aol.com message: looking for 69 125cc harley davidson rapido gas tank
51. kigy@centurytel.net message: WANTED; SERVI-CAR GAS-OIL TANKS FOR 1967-69, should be in good shape,thanks
50. wdbdel@yahoo.com message: WANTED: NOS cable housing for '40 EL, or accurate reproduction. Please email price or info regarding where I can get one. Thanks!
49. howiem@bigfoot.com message: Wanted: 3-hole mount carburetor for 1929 Harley-Davidson JD Motorcycle. Currently has Schebler Deluxe 1 1/4" carb with a 7/8" venturi, but can also use a 1 1/8" with 3/4" venturi. The item is to be shipped to Thailand. If you can provide the item or have any recommendations, alternatives, it will be most appreciated.
48. burgular@comcast.net message: Wanted : The following hydra & Duo-Glide Big Twin windshield parts in NOS or excellent used condition :
58021-56 lower blue
58022-56 lower red
58026-60 adjustable window blue
58028-60 adjustable window red
Will pay reasonable market value. Must have the Harley bar & shield emblem embossed into it with DOT #'s. Must be able to send good clear close up photos to : burgular@comcast.net or call Elmer at : (860) 982-6126 Leave message with phone # if no answer and I'll call back within 10 minutes. Thanx's George!!47. emanuelpfister@hotmail.com message: I search a Harley Knucklehead in original condition ... NO REPRO PARTS .... if you now somthing please help ... i com from switzerland
46. djfitz@ocslink.com message: Looking to buy 1937-1939 Indian Chief project bike. Will also consider older restoration. E-mail me at djfitz@ocslink.com or phone 309-645-4623 if you have one available or know of one elsewhere.
45. wolfebike@mchsi.com message: Wanted Early Thor Carb for a 1903 Imperial Motorcycle Believed to be made by The American Bicycle Company in Conn..Also need Literature Picture anything of this bike so I can make a Gas Tank for it...Please Help any information would be appreciated.
44. llwauto@aol.com message: 30-35 harley vl rear fork leg or complete springer allso a set of cams thanks
43. indian@indy.rr.com message: American made motorcycles and parts. Love 4 cylinders. Especially Indian, but not picky. Private collector with cash. Will travel. Big loads are a plus? 317 201-7777
42. jurassicracing@rushmore.com message: wanted............. 1915 thru 1917 excelsior engine,prefer nice original and complete,have 1912 or 13 excelsior engine to trade in excellent original and complete condition.
41. mplanet9@aol.com message: I am looking for an unmolested (not a chopper) 1948 (not a replica) H-D panhead. If it needs work, that's OK as long as the majority of the bike is there. I may be able to go as high as $14,000 depending on the bike. If you have one, e-mail me with the details and please include HD in the topic. I live in the Western NY area. Love the site. Thanks George!
40. dmk441@yahoo.com message: Wanted: 1913-14 Thor 4HP single parts. I need Piston, handlebar control sleeve, fender braces, and small misc. parts, thanks George.
Dave39. bondini@hotkey.net.au message: Wanted Ace / Inidan Ace forks or components. Any condition accepted. Also required to complete bike, rear corbin dual brake hub, once again any condition.
Regards
Marc38. bdwalker348@yahoo.com message: I need lots of parts for my 1929 Indian 101 Scout project. I only have a frame, big fork (not the front link), engine cases, clutch, carb and primaries, so I need a lot! Please email me at bdwalker348@yahoo.com. Thanks!
37. 1mbwlc@verizon.net message: Hello,
I'm looking for following original parts for my 1942 H-D WLC, please help!
- correct original front fender marker light assy complete, part number 4901-41AN (early style)
- correct original tandem/buddy seat assy complete, part number 11235-41N (early style)
- original Spare Parts List for H-D WLC, it covers both models 1942 & 1943, marked with Symbol No. H-D WLC-03 (upper right hand corner on the front cover)
Prem
36. r-mulder@home.nl message: Hi there
I'm looking for a KH 900 or XL 1957 speedometer
Greetings from Holland
Ron
35. jdkljennings@adelphia.net message: NEED SOME HELP DOES ANYBODY HAVE A NICE SET OF SIDECAR SPRINGS TO FIT A 1918 HARLEY SIDECAR ALL FOUR OR WHAT EVER YOU MAY HAVE. THANKS FOR LOOKING.
34. dixchief@gmail.com message: Wanted: front frame section for an Indian SS. 1940 &later preferred but earlier will work for me. Thanks George
33. dixchief@gmail.com message: Wanted: front jug for a 1936 chief.Thanks George
32. indian_29@hotmail.com message: Indian 2-speed transmission with clutch.
31. twhughes@ozarkisp.net message: want to buy a 1948 indian or older doesn't have to run ,maybe build one from parts. prefer chief. what are my chances?
30. jje100@earthlink.net message: WANTED: 1938 OR 1939 Indian Chief. Bike must have original sheet metal and matching numbers. Price dependent upon condition, of course.
If interested, I have a 2002 HD Road King Classic, with 6,700 miles and Stage 2 Big Bore kit plus lots of extras as a possible trade. Will pay cash for the Indian if not interested in a trade.
Call 720 350 6883 or email jje100@earthlink.net29. Springerandy@aol.com message: Wanted - Original Panhead Air-Cleaner. Let me know what you have.
Thanks.28. www.PxBEEN@hotmail.com message: wanted uncut wisboon frame for panhead 1948
27. burgular@comcast.net message: Wanted : The following hydra & Duo-Glide Big Twin windshield parts in NOS or excellent used condition :
58021-56 lower blue
58022-56 lower red
58026-60 adjustable window blue
58028-60 adjustable window red
Will pay reasonable market value. Must have the Harley bar & shield emblem embossed into it with DOT #'s. Must be able to send good clear close up photos to : burgular@comcast.net or call Elmer at : (860) 982-6126 Leave message with phone # if no answer and I'll call back within 10 minutes. Thanx's George!!26. jerite@hotmail.com message: I AM IN SERIOUS NEED OF A BASKETCASE OR ROLLING CHASSIS,IDEALLY A PAN OR SHOVEL. I WAS FORCED TO SELL MY 52' PAN LAST DECEMBER DUE TO REASONS BEYOND MY CONTROL(DOING THE RESPONSIBLE FAMILY MAN THING)AND NOW I AM GOING MAD WITH NOTHING TO WRENCH ON. CAN ANYONE HELP A BROTHER OUT WITH A DEAL? PLEASE RESPOND. THANKS SO MUCH - JER 815-326-1931 LEAVE MESSAGE
P.S. MOST EXCELLENT SITE25. loikav@aol.com message: Wanted, Any Indian Powerplus wheels and Henderson teens stuff. Paul 562-4331465 or loikav@aol.com Thanks.
24. hagen_rinke@web.de message: Hi I´m searching for a pair of cylinders for a 1925 J front and rear cylinder needed.I´m also looking for a pair of gas tanks.please write me a e-mail if you have some of this parts.Thanks to George
23. handarms@acr.net.au message: I am searching for a pair of gas tanks to complete the restoration of my 1928 J model Harley. Repro will do if someone can steer me to a good tankmaker.
22. sales@usrotarysports.com message: WTB left side ( or a pair ) '47 knuckle gas tank in good shape. Please e-mail or call me (866)867-3798.
Thanks for looking.21. pan54dd@aol.com message: Searching for a 38,39 embossed top big twin oil tank, any shape, send pics if available, Thanks For Any Help...Dave
20. OldIronAddict@aol.com message: Wanted, Harley `46-47 bullneck frame. Email, or call me 714-447-9564, Thanks, Tommy......
19. parkerize@charter.net message: original straight Kelsey Hayes 18 inch rim with original black paint for early knuckle (take a whole wheel or just the rim). Tons a junk to trade. thanks
18. colw@bsa.qld.gov.au message: Pre 1923 harley rear brake shell and mechanism wanted for a 1922J any shell from 1916 to 1923 will do. Your help will be greatly appreciated as it will complete a 1923 project. I am located in Australia but mail makes US dealing easy.
17. mhawkin4@tampabay.rr.com message: I am looking for a orginial 1962 xlch horseshoe oil tank w/a top fill neck. If anyone can help please email me right away.
16. 1968@amphicar.com message: WANTED!!
Rare older, 3 wheelers like dispatch tows, sidecars or servi-car type bikes. I am looking for RARE and UNUSUAL examples only. Must be complete, restorable, high quality restoration or (preferable) original condition. Call 970-532-4104 (John)15. pigstye13@aol.com message: WANTED: One nice ORIGINAL 33860-47 Shifter rod (no chrome please) runs from tank shift handle to top of tranny.
Fits 1947 to 1952 WL and Servi-car. cash or trades,
Mutt (903) 873-664414. bowlesjeff@hotmail.com message: for post 11 3rd down I sould have put part number #2823 Sorry
All so need part # 64500-52a wing stud13. trosa54@hotmail.com message: Wanted: 34-39 H-D two bolt trans and clutch assy. Complete or good usable parts to build one. Have Indian 101 trans and clutch stuff for sale or trade. Thanx.
12. docmacomber@hotmail.com message: Looking for an Harley-Davidson WLA 1938-1945 with sidecar. Must have all parts. No basket cases.
11. bowlesjeff@hotmail.com message: i need the 4 5/16-24x3/8 truss hd screws for the fork covers on a 54-65 KH,XL,XLH and that well have my 57 complet
10. 56flh@web.de message: I`m looking for a Cyclone dirt track motorcycle from Joerns Motor Mfg. The shape is equal. Please provide evry kind of parts or complete bikes. Thanks
9. summertime2@cox.net message: wanted!!!! 1970 sportster parts needed...especially chromed original or aftermarket primary,cam and kickstart(electric and kick) covers.
8. btflat47 "@" aol.com message: I have a really sharp and beautifull 100% original deluxe seat correct from 1952 to 1954 to trade for a 1947 to 1949 original deluxe seat(rosettes are dark green on the bottom ,yellow on the top)
Need info just let me know.If you are serious i can send accurate pics that hide nothing.To email me please remove spaces and " " around @ to avoid spamming.
Thanks Georges
7. paramotor2000@yahoo.com message: Looking for a basket case flathead 74 or 80 cu. in. any condition, the more complete the better, with title.
thanks George6. dmk441@yahoo.com message: Wanted: Pre 1915 Merkel single or twin engine, also Pre 1915 Yale, Pope, or Thor Twin motor and other misc. parts. I have 1912/13 Harley parts(Frame/Engine) etc. for trade, thanks George.
Dave5. jamesinman@comcast.net message: Wanted; Rear fender for 1947 knucklehead or 1948 Harley panhead in original black paint. Must be complete fender. Will consider any condition.
Jim (209)334-26324. PALancia@aol.com message: Wanted: 1938/39 Indian Four, basket, rolling or running. Also, interested in Scout 101; 1930's project. Best regards to you all. Paul
3. nonne2@hotmail.com message: Looking for a pair of large port cylinder heads ,rocker arms and covers for Knucklehead. Please let me know if you got anything :0) Cheers
Rino
2. rabbit421@myway.com message: I see Henrietta Evans is advertising again -- I thought maybe she (and Don) were finally kicked off the site because of customer complaints. Anyway, before sending any money out that way you might want to ask around a bit first. Try here, or at the Horse BC Swap Meet.
1. Springerandy@aol.com message: Wanted - Original Early 74" Panhead Cylinders (Jugs) and an Original Panhead 8-Fin Cam Cover. E-mail if you have anything for sale. Thanks.
July 2005
96. rboykeps@hotmail.com message: i want The Knucklehead Engine completed [project],please,... email me ; rboykeps@hotmail.com
i have a 45 [WLA series 5] if you want to trade for good !!!
i will pay $$$ the rest.
thanks95. info @ beautyofspeed.com message: Indian Sport Scout center frame section for a race bike project. I don't eed all the tabs etc... but I need it to be nice straight one. I also need an inner primary cover. Serious Buyer! (remove spaces around the @ to email me).
94. vintagespeed1955@swbell.net message: *** WANTED *** 1914 HARLEY SINGLE CAM COVER. ANY CONDITION.
Send email: vintagespeed1955@swbell.net93. jokerman115@aol.com message: Wanted Contact with the Guy who bought the Avia police radio that was bought some years ago in davenport. I would like some pictures of the radio and some info on it.
thanks scott
92. jessijfoster@yahoo.com message: WANTED: White Buddy Seat, or white Buddy Seat cover. For 1969 Harley Davidson FLH.
91. jessifoster@comcast.net message: All white Buddy Seat, or all white Buddy Seat cover, for 1969 Harley FLH.
90. wolfebike@mchsi.com message: WANTED 1913 INDIAN CHAIN GAURD, CLUTCH GAURD,TOOL BOX,ORIGINAL PAINT PARTS...PLEASE CONTACT wolfebike@mchsi.com THANK YOU
89. Steve45hd@yahoo.com message: Projects wanted ! Looking for 1948 Pan complete bike basket or parts. willing to look at most anything. Also would like UL ULH same basket or what have you? Email me pics and prices all answered.....
Thanks for lookin88. hogluvr1340@yahoo.com message: Looking for the following parts for a '56 Panhead:
51610-58 Seat Plunger (pogo stick)
50061-36 Jiffy(Kick) Stand
36918-52 Clutch Rod
36916-52 (36) Rod End
36921-52 Rod End Bolt
33068-54 Kicker Arm
38618-52 Clutch Cable
33096-54A Kicker Shaft
42430-36 Rear Brake Pedal Stud
33638-52 Footshift Bracket Bushing
Battery Top Cover & Hold-Down RodsOEM would be great, repop stuff is OK too, right now this thing is a bit away from being an original-style bike, just looking to get it back on the road for now. If you have any or all, please email hogluvr1340@yahoo.com
Thanks George!!
87. wolfebike@mchsi.com message: NEED Original 1913 Indian Chain Gaurd and Clutch cover.Also Tool Box
Please contact me at wolfebike@mchsi.com or call 563-370-0654
Thank you86. Springerandy@aol.com message: Wanted - Original Early Panhead Cylinders (Jugs). If you have any please let me know. Thanks
85. barrytabel@bendcable.com message: Just starting correct restoration of 1969 XLCH. Need solo seat, part # 52000-40 or 52010-54 w/hardware & springs. Horn #69000-65. Rubber fork boots #46001-54 w/retainers & straps. Interested in any 1969 XLCH parts, esp. NOS. Thanks. BarTab
84. fatdog1903@yahoo.com message: Stop by annd see our latest update August 1st! new items in the "NOS and Used section"! www.fatdogvintagesalvage.com Thanks George!
83. onyon.jim@sbcglobal.net message: wanted: one each original uncut 1937 UL harley frame.
82. ste.antoine@compaqnet.be message: Wanted : front intake cup for late knuck(smallest), have late knuck front exhaust/rear intake cup and/or pre '38 cup for trade, or just buy. Thanks George ste.antoine @ compaqnet.be(leave out spaces)
81. oldcycledoc@hotmail.com message: Harley JD gas tanks '25-'29 ( Later rounded style ). I am looking for original tanks to de-solder and rebuild, the usual minor dents
do not bother me, but I Don't need any more rusted-through sets.
What Have You Got ??....Contact Steve at oldcycledoc@hotmail.com80. indian@indy.rr.com message: Four cylinder bikes and parts. Anything 4 cylinder. Also, anything AMERICAN made in bikes or parts. Have the cash and will travel. 317 201-7777
79. indian@indy.rr.com message: American made motorcycles and parts. Especially Indian, but not picky. Private collector with cash. Will travel. Big loads are a plus? 317 201-7777
78. colin_peter@asiamail.com message: Hello, I am looking for some people to scam! Here is how it works... I email wanting to buy anything for sale. I send a fake cashiers check for more than the amount of your item. I then call and ask you to send the balance to my shipper (again me) via money gram. By the time your bank figures out the check is bogus, I am on to the next sucker. Send me a note and let me know how you feel about me! Spam me as I like it in return. Thanks, and hope to do business.
77. duda@rduda.com message: Wanted: I am looking for original cuts and mats. These were the copywork that Harley would give to a dealer to put in the local newspaper. I will buy either original or make copies. Richard Duda 802-888-7689
76. pcaputo@voitco.com message: I have a stock 57 straight leg frame with all the tabs, probably a 8-9 out of 10 scale due to a few extra tabs added for foot pegs and disc brake. can be removed and made mint. I want to trade for a 48/49 wishbone frame thats stock and in great condition. thanks
75. pcaputo@voitco.com message: Wanted, inner primary cover for my 46 knucklehead. thanks
74. grinch@airmail.net message: Wanted: transmission gear case for 31-35 Harley Davidson VL. Looking for a "one ear" case for 4 speed or reverse. Thanks
Greg Sveska email: grinch@airmail.net phone: 817 683 819173. DANPATCH@PLANETKC.COM message: WANTED HARLEY 46 47 BULNECK FRAME CALL DAN AT 913 515 3721 913 268 5314
72. marshmetz@aol.com message: Marsh Metz twin 90 degree motor or parts needed. Sold under Marsh Metz, National, Peerless and Arrow. Thanks Ken
71. Joe58DuoGlide@aol.com message: $$$$$ TOP DOLLAR PAID !! for Front Fender DuoGlide with Siren hole and Bracket Needed ! have Siren...NEED FENDER & BACKING PLATE
70. adolphschmidt@comcast.net message: Wanted forks for 1915 Harley Davidson
Adolph Schmidt
adolphschmidt@comcast.net69. henderson@c.dk message: EMBLEM motorcycle, need parts for this.
Do you have some?68. pigstye13@aol.com message: WANTEED URGENTLY:::
Need one upper outer and one lower outer springe fork spring for 1926 thru? B model (Peashooter) springer fork.Have the rest of the complete assembly,only need these 2 items to complete it and I need to do that ASAP if not sooner. CAsh,parts,both,whatever ya want for them. Thanks .....Mutt (903) 873-664467. mfsanchez@earthlink.net message: I am looking for a cat eye dash cover for 1944 ul flathead. I will repair if it is not to bad. Please call collect at (505) 471-1876 and I will send money. Ask for Mario. Thanks
66. fcara@flexconind.com message: Looking for 1937 BT clutch rocker pedal and a 1937 BT front crash bar. Also I would be intrested in any 1937 BT flathead parts. I have a 1937 ULH. I have parts to trade or Good Old American CASH. The choice is yours.
Thanks, Frank65. info@ace-ltd-usa.com message:
ATTENTION! WANTED - BUYERS! ATTENTION!
Nice lot of Harley junk headed for HEBRON CT Meet July 30th
Some knucklehead, panhead, K model, etc. Some examples:
1937 Knucklehead dash cover and base nice
1947 Knucklehead RH case nice
1936-39 Knucklehead speedo cable nice
1938 -38R Knucklehead sirens
1941-46 Clutch rocker
1946-64 Clutch rocker
Call Pete at 603 396 8355 for more info. July 25, 2005. Thanks George!64. test@test.com message:
test
line1
line2
goodbye63. portcapt1@comcast.net message: Wanted; 73 servicar, but will consider any late model electric start servicar, must be nice original bike or very good restoration, no frankinstien crap, no funny numbers or bikes with questionable backrounds i am familiar with restored bikes. AMCA member. This will be for my own personal use so I will be extremely selective. Send photos and details to portcapt1@comcast.net
62. produksjon@bridgestone.no message: I need a set of good cam followers to my 1919 powerplus, regards Lars
61. darbone8@aol.com message: WANTED: Skull-type dash cover for 36-39 Harley, also need gas tanks and rear stand for same.
email w/ pics, price
DARBONE8@aol.com
60. cknoop"39"@hotmail.com message: 1915-16 Reading Standard Motor Wanted.
Complete motor or parts.
Many trades like Iver Johnson Timming Cover and gears, 101 Splitdorf Genny, 41-42 Sport scout Rear Hub + Brake
Please remove the " " from the Number in my email address.
Thanks59. cuminsalami@verizon.net message: Looking for a 1970's era FX rear fender and braces.
Thanks58. dmk441@yahoo.com message: Wanted: Antique Motorcycle project for around $6-$8K give or take. Anything
1905 to 1949. Indian Scout, prince, powerplus, Chief, or Harley JD, VL, WL, Excelsior super X, etc. email me if you have a decent project between those years. I will also be at Davenport, thanks George.
Dave
AMCA#138857. djfitz@ocslink.com message: I need an original 1957 Harley Panhead/Sportster plastic tank emblem. Will buy single or pair. Please e-mail me at djfitz@ocslink.com if you can help. THANKS!!
56. pigstye13@aol.com message: WANTED: I bought a 3" spool hub from Nostagia Cycle in 1986.The hub was chrome stell billet and had 6 small bolt holes on each side to mount a mini rotor(if you wanted). In the Nostagia Cycle catalog,it said they were made by A.R.P. Does anyone know if that company is still in business OR does anyone have one of these hubs/wheels laying around and want to sell it? I need the hub ASAP if not sooner.Thanks for any help....Mutt (903) 873-6644
55. bumvivant@hotmail.com message: looking for parts to complete a 1910 indian single 2 3/4 engine. I need the head, intake manifold, rocker, cam cover, oil pump, front engine mounts, Bosch DA2 mag, and push rod. Parts or info appreciated
54. wolfgang.scheerer@iname.com message: Looking for a J-slot air cleaner cover as well as for a offset springer fork and correponding handlebars for my '48 panhead.
All tips are welcome.
Thanks George!53. shola_toyinstore@yahoo.com message: ++ PLEASE SPAM ME (back) ++
shola_toyinstore@yahoo.com
Hello salesman,
I am interested to buy your(bike) I would like to know that the real
price and also it is the current state and the condition and me will prefer
to pay with a control of books and forwarding I know a good maritime company
which I used.kindly return now with the price.
Respect
++ PLEASE SPAM ME (back) ++
shola_toyinstore@yahoo.com
52. mogandbasset@comcast.net message:
NEED 45 0r Servi-car TOP TUBE with tank mounts.Some chucklehead
cut into a perfect frame to put some WCC tank on it then found
out it would'nt work!! Would like whole tube from neck to seat
post if possible.THANX GEORGE
51. spsport@bektel.com message: looking for a coil for a coil for a 1921 hd jd. cash or trade!!!ANYBODY???
50. ghwoodworks@cablerocket.com message: 1927 hd jd ,, i need a headlight , oiler ,messenger seat and chains thanks
49. fakeit@bellsouth.net message: Still looking for primary covers for 1929 hd model (d). thanks richard
48. pigstye13@aol.com message: WANTED. Need tail light for Harley 125 / 165 1948 to 1955. As long as the cup is good,I don't care if the lenses are missing and the bracket is trashed,just need the cup. Also a K model uses the same cup,so that would work also. (903) 873-6644
47. dmk441@yahoo.com message: Wanted: mid-late 1930s Indian Junior Scout or Sport Scout, would prefer original paint, but would consider any complete, and/or running or close...nonconcourse project, have cash waiting$$$$Thanks George.
Dave46. kswinkelman@yahoo.com message: I am looking for a 1942-1945 WLA Military issue Harley Davidson.
45. slovewell2@aol.com message: !!!!!WARNING!!!!
lot of knuckle flathead stuff listed in WALNECKS these guys are crooks and i try to warn people, they were in las vegas now in florida used to sell stuff on e-bay "albert knorr" is his name & "carolyn martin" they get kicked off and come back as new members w/phony names. ex-names were "jjcycles" "ulh80" to name a few. i've talked to a lot of peple who have gotten ripped off by these guys a lot of you know who they are already
old ebay user id's used by these guys:
User ID: sadle408
Name: George v Knott
Company:
City: Fort Lauderdale
State: FL
Country: United States
Phone: (954) 281-8271
crystal martin/albert knorr
15201 North cleveland Ave. #115
Fort Meyers, FL 33903
(954) 281-8271Crystal Martin
3311 S.W. 8th ST.
Cape Coral, Fla. 33991
eMail is jjcycle@hotmail.com
239-283-9235 your supposed to ask for JJ
Tarolyn Martin
3528 Sweeden St.
Las Vegas, NV.
89129User ID: jjcyclellc
Name: JJ Cycle
Company: jj Cycles
City: Cape Coral
State: FL
Country: United States
Phone: (239) 883-9335they try tell sell repo frames as oem and sell cases/motors and never ship
--------------------------------------------------------------------their adds are listed with 954-281-8271 as phone number and email as sixpack205@hotmail.com
---------------------------------------------------------------------
sorry this isn't the right forum but people need to be warned........
44. kentclarke@verizon.net message: Looking for a pre-50 oil pump cover- where the return line connects to in the front of the oil pump. thanks.
43. dmk441@yahoo.com message: Wanted: Early 1920-1927 Ace four Motorcycle project, parts engine, misc. email me if you have some spares, thanks George.
Dave42. jim@guidera.com message: WANTED For 1926 H-D Model J: distributor cap and rotor, aircleaner. Will pay top dollar.
41. norpts@aol.com message: need motor for simplex servi-cycle..
40. pigstye13@aol.com message: Looking for a 1960 Pan right side case half or any year panhead case that would other wise be scrap yard material. I need the relay boss from it to repair a nice case I have that someone ground the boss off to run a mag. Thanks..........Mutt (903) 873-6644
39. robbhenninger@hotmail.com message: I have a 1969 or 1970 Steyr-Daimler-Puch motorcycle model 810.895721 also says simpsons-sears does any one know where I can get parts ? Thanks Robb
38. mtaylor570@aol.com message: Hello all, Im looking for a Mid 20's cleveland motorcycle to restore- looking for bike in any condition also parts. thanks so much. Mike
37. jcsrestoration@cswebmail.com message: Wanted:1925-1948 Indian Scout or Indian Chief motorcycle, complete project or running bike. I have a 1912/13 Harley project for partial trade(I have well over $15K into it) email me if interested in the Harley project or if you have a reasonable scout or chief project for sale, thanks.
Dave36. hogluvr1340@yahoo.com message: Still looking for a fairly original Panhead, don't want a museum piece, I actually plan to RIDE this thing. Fixer-uppers welcome, I don't mind getting grease under my fingernails, would like something fairly complete. If you have something you want to part with or know someone who might, please email me details to hogluvr1340@yahoo.com
35. bigdesert1@hotmail.com message: Looking for a panhead that is mostly original.A rider as opposed to a show bike is preferred. Thanks. John
34. portapotti@prexar.com message: I'm still searching for a set of late teens or early 20's curved headlight mounts for a Harley twin. JD parts to trade or the last resort of cash. Thanks, Dave
33. lazlobassett@optonline.net message: Wanted,one hand grip original condition for '47 Chief. Had a fire and one is gone, Worn ribbed with Indian on inner edge. Thanks Matt
32. michael@upholsteryshop.org message: I need a stock transmission case for 1981 Sportster XLH, 1000cc, Ironhead. I'm in Portland Oregon. Will ship, etc.
31. moconnell46@hotmail.com message: looking for restored, mechanically strong servicar preferably eletric start post '66 but I'm interested in all offers
30. plefe@hotmail.com message: Need some help locating a set of late 55FL, or any 56FL or 57FL pan cases in very good to excellent condition with HD title. Do not have to match numerically, but title must be clear. This is my first pan project and hope you guys can help. Thanks!
29. wcbishop@bellsouth.net message: Wanted : Clutch Drum for a 69 FLH Thanks, Wayne
28. colw@bsa.qld.gov.au message: HARLEY DAVIDSON 1914-1918 single cylinder timing case, timing case cover (with oil pump)and all timing gears and cams wanted. This is all I am missing to complete a bike can anyone help? I am in Brisbane Australia
27. HOST@HARLEYHUMMER.COM message: WANTED ASAP: HARLEY HUMMER LIGHTWEIGHT PARTS. SCAT, PACER, SUPER-10, 125, 165, 175 parts, basketcases, etc. ! We are ...SERIOUS... buyers of your Harley lightweight parts. New, used, and NOS. We buy it all! Please e-mail us at host@harleyhummer.com
Also visit our web site.... http://www.harleyhummer.com
Thanks GEORGE! Keep up the great work!
26. kayakersteve2001@yahoo.com message: Looking for an older service bike (trike)Saw these when I was young in the 1960's
25. indian_29@hotmail.com message: 1913 Indian twin engine and two speed gearbox wanted. Have PP engine and gearbox for possible trade/cash adjustment. Looking for handlebars, gas and oil tank too, have nice early Super-X tank in original paint for trade. Correct address this time!
24. iindian_29@hotmail.com message: 1913 Indian twin engine and two speed gearbox wanted. Have PP engine and gearbox for possible trade/cash adjustment. Looking for handlebars, gas and oil tank too, have nice early Super-X tank in original paint for trade.
23. v8_muskler@hotmail.com message: I have a 1978 AMF Harley Davidson 125cc. I am wondering if anyone has any idea where I can locate parts? Or other people (in Sweden) that knows things about / or have an AMF Harley that are almost like my bike.
Thanks for your help.......
22. emanuelpfister@hotmail.com message: i search a ORIGINAL 1947 knucklehead ...
21. danmargolien@yahoo.com message: Looking for saddlebag lids for '63 HD FL. Early 'glass- seal is on the bag bottom. one/both/pieces. Thank you!!
20. info@ace-ltd-usa.com message: WANTED: VL 3 Speed Reverse Tranny Parts: Here are the part numbers:
2367-31
2351-31
2370-31
2371-31
2374-31
2360-31
2365-31
2366-31
2367-31
2359-31
Please email or call Pete at 603 396 8355. Thanks George!19. info@ace-ltd-usa.com message: WANTED: VL 3 Speed Reverse Tranny Parts: Need shift forks and rods. Any help would be greatly appreciated. email or call Pete at 603 396 8355. Thanks George!
18. wcbishop@bellsouth.net message: Wanted: A 38 harley EL motor or at least 38 matching cases. Will be well used in a nice 38 frame and front end. Will also take any knuckle left side case for a chopper project. Will listen to any offers. Thanks, Wayne
17. oldmill@rideau.net message: WANTED FLXI SIDECAR OR JUST CHASSIS OR ANY PARTS
16. blade66@greenmail.ch message: I`am looking for a Knucklehaed/E-EL /74Cu.inch. Year, between 41-47.
Musen`t be in good condition but complet able to rebuild.Regards
Richard
15. ghwellin @ gmail.com message: Wanted- Green Guide fender light lens for Buck Rogers style lamp. Will trade NOS red glass Beehive lens or NOS cateye lens.
14. harleyrandy1947@comcast.net message: Wanted rear 1955 pan head in decent condition. ok if drilled for extra holes for rocker cover.
13. stephanied803@yahoo.com message: Looking for a swingarm for a '87 Sportster. I have already have the rear-end, so just looking for the swingarm.
12. spsport@bektel.com message: looking for entire ignition unit for a 235 hd generator namely for a 21 JD 74 ci thank you
11. jim@guidera.com message: WANTED for 1935 VLD: rear brake light swich.
10. jim@guidera.com message: WANTED for 1926 H-D J: rotor for distributor, and p/n 1735-25 coil cover. Thanks George!
9. pigstye13@aol.com message: IS there anyone out there that has a Harley Peashooter fork and a exploded diagram of the fork components.I need to buy the complete set of CORRECT springs and don't have a parts manual to get the OEM part #'s from.Thanks for ANY help (903) 873-6644
8. spsport@bektel.com message: wanted for 21 hd jd tranny mainshaft and mainshaft startergear cash or trade.
7. Host@harleyhummer.com message: WANTED ASAP: HARLEY HUMMER LIGHTWEIGHT PARTS. SCAT, PACER, SUPER-10, 125, 165, 175 parts, basketcases, etc. ! We are ...SERIOUS... buyers of your Harley lightweight parts. New, used, and NOS. We buy it all! Please e-mail us at host@harleyhummer.com
Also visit our web site.... http://www.harleyhummer.com
Thanks GEORGE! Keep up the great work!6. primosoftail@netzero.com message: I'm looking for a 1948, 74ci HD
Thanks
PS the paint doesn't have to be the best, but not many "aftermarket" parts please.5. btflat47 "@" aol.com message: I have a really sharp and beautifull 100% original deluxe seat correct from 1952 to 1954 to trade for a 1947 to 1949 original deluxe seat(rosettes are dark green on the bottom ,yellow on the top)
Need info just let me know.If you are serious i can send accurate pics that hide nothing.To email me please remove spaces and " " around @ to avoid spamming.
Thanks Georges4. jerite@hotmail.com message: I AM IN SERIOUS NEED OF A BASKETCASE. IDEALLY A SHOVEL OR PAN. HAD TO SELL MY PAN LAST DEC FOR REASONS BEYOND MY CONTROL(DOING THE RESPONSIBLE FAMILY MAN THANG)AND NOW I AM GOING MAD WITH NOTHING TO WRENCH ON. PLEASE CAN ANYONE HELP A BROTHER OUT WITH A DEAL? PLEASE RESPOND IF AVAILABLE. THANKS MUCH - JER 815-326-1931
P.S. EXCELLENT SITE!!!3. jdkljennings@adelphia.net message: i need a set of sidecar spring to fit my 1918 harley sidecar all four or what ever you may have for sale or trade. thanks joe
2. alan@drivesouth.us message: Just a simple request,I'm looking for a Henderson 1917 or 1918 Motor,Hope You can help,Alan
1. jimw@saltlakecircuits.com message: 249 vertical parts
May 2005
103. info@ace-ltd-usa.com message: WANTED TO TRADE / SELL: I have a nice original unmolested 1937 John Deere "B" model popper for sale or trade. Must be 1947 or previous vintage, must be 45" or greater, must be a twin cylinder. Other than that any H-D, Indian or other Domestic parts pile is fine by me. Call Pete 603-396-8355.
102. info@ace-ltd-usa.com message: WANTED TO TRADE / SELL: I have a 1937 Lincoln Zephyr Sedan 12 cylinder that I would like to trade for bike or parts. Must be 1947 or previous vintage, must be 45" or greater, must be a twin cylinder. Other than that any H-D, Indian or other Domestic parts pile is fine by me. Call Pete 603-396-8355.
101. feld0028@umn.edu message: Wanted: Topper handlebars, prefer complete w/ internal throttle and any original levers.
Also interested in low cost (repro ok) springer fork for 1" neck frame. Send me what length(s) you have.
Thanks
NokoNate100. girardfox@aol.com message: Hello! I am looking for Henderson Deluxe parts to fit a 1922 model:
Headlight lens, complete tail light, oil-filler cap, gas cap, oil gauge and bracket, ammeter bracket, horn bracket(handlebar-mount),etc.....
ALSO: For 1934 Sunbeam Model 80: need clutch plates, kickstart return spring, clutch springs.
Thank You!99. portapotti@prexar.com message: I'm still needing a pair of the curved headlight brackets to fit the teens and 20's Harley. I know they aren't correct to the 1922 that I am trying to complete but with a gas light, I feel they look much better. I have a very good condition light to mount on them so please dig deep and help me out. I have many JD parts to trade, so maybe I can help you out. Email or call David at 207-695-2500. Thanks.
98. sallyhadwiger@bigpond.com message: connecting rods to suit my 1930 D model harley please also ahorn bracket
97. sallyhadwiger@bigpond.com message: connecting rods to suit my 1930 D model harley please also ahorn bracket
96. daphner@chestertel.com message: Looking for a Harley Davidson Hummer (1950 - 1965) to restore.
95. motorcityjim@cox.net message: Wanted:Harley 46-48 Offset springer top tree or handlebars,I just need the clamp,so broken handlebars or chopper stuff is fine.Thanks.
94. waloo321 @ yahoo.com message: WANTED: Top triple clamp for VL springer.
Email: waloo321 @ yahoo.com
When emailing, remove the spaces around "@" in the address. Thanks.
93. johncopelandstudio@verizon.net message: Still looking for 55-65 left hand panhead case or set with good orignal numbers, no aftermarket. Last thing I need to finish this project, Thanks in advance... John Copeland - 718-418-7904
92. hogluvr1340@yahoo.com message: Also interested in a complete '56 Pan MOTOR w/title, or '56 cases w/title (good numbers only, please). Email hogluvr1340@yahoo.com
Thanks George, for a terrific site!! Oh yeah, and death to the spammers!
91. raphaelsmadja@hotmail.com message: wanted SEAT for a KNUCKLE PANHEAD solo seat, the seat does not have to be in good condition i only need the foam to be in clean condition iwill redo the leather cover to a custom fit call me at 213 507 0073
90. hogluvr1340@yahoo.com message: Looking for a fairly original Panhead, don't want a museum piece, I actually plan to RIDE this thing. Fixer-uppers welcome, I don't mind getting grease under my fingernails, would like something fairly complete. If you have something you want to part with or know someone who might, please email me details to hogluvr1340@yahoo.com
89. henderson@c.dk message: Need parts for Henderson 1918-1919: engine,and other parts.
Thanks George88. henderson@c.dk message: Need parts for Henderson 1918-1919: engine,and other parts.
Thanks George87. pan54dd@aol.com message: looking for female rear connecting rod with no cut out (window) part # ZA - 705 in repairable condition, any help thanks!!!! Dave
86. johncopelandstudio@verizon.net message: Need left hand panhead case, 55-65 with good numbers or NOS left hand case, to replace broken case. Email or call John, at 718-418-7904. Thanks in advance.
85. mike@rfiservices.com message: Lookin for a "Super Deluxe Buddy Seat" 1958-1980 style. All hardware is needed. I have a 94 and will modify to fit. Any ideas are welcome.
Send to mike@rfiservices.com or 240-508-376084. rschutlz@atwell-hicks.com message: Schebler HX181 in relatively decent shape.
83. emanuelpfister@hotmail.com message: i search a 1947 Harley Knucklehead in original Condition .( When it have first paint its great ) Not too much repro parts . please help me to find it .... regards
emanuel82. ddechambeau@verizon.net message: WANTED TAIL LIGHT LENS COVER FOR 1970'S BATES FIBERGLASS SADDLE BAG. IT MEASURES 2 1/2' WIDE X 4' TALL. I CAN SEND A PHOTO OF ONE FOR A BETTER DESCRIPTION. MAIL DDECHAMBEAU@VERIZON .NET
81. peter@614engineering.com message: Wanted: 1914 Excelsior twin timing cover. Also a front and rear hub, and a rear brake.
thanks
Pete80. portapotti@prexar.com message: I need an original set of the curved headlight brackets used on the teens and early 20's Harley. These will be used to mount a gas headlight on my 22 "F". This is one of the final pieces needed to complete this bike. I have JD parts to trade or cash if desired. Somebody must have a set out there someplace to help me complete this bike. Email or call David at 207 695 2500. Thanks George for this site!!!
79. ebrown@pgonline.com message: Wanted: 1925 - 29 left hand JD motor case with good numbers, will consider a match pair of cases also. Thanks
78. ebrown@pgonline.com message: Wanted: a pair of 13 fin ULH cylinders in good condition or rear cylinder only. Thanks
77. ghwellin@gmail.com message: I need a green plastic lens for a Harley 50's front fender light, Flash Gordon style. NOS or excellent condition. For a bike so I don't need the box. Have earlier complete light in good condition I may trade or will purchase. Thanx George!
76. jim@guidera.com message: I also need an original style aircleaner for the 26J.
75. my46wl@yahoo.com message: needed to finish 46wl restoration, original tank set left hand shift,
original civilian 41-46 speed-o
original front fender, good shape.
#919-761-1201 thanks74. jim@guidera.com message: 1926 Harley-Davidson Model J. I need an original distributor and the nameplate that goes on the battery box. Thank you.
73. ib@trupart.co.uk message: Knucklehead wanted. Original or restored to original style with mostly original parts. Must be a running bike. Thanks.
72. ShaLar@Colmar.com message: I am bringing a bunch of early motorcycle parts, motors, etc to the swap meet in Dixon, CA this weekend. I will be in space 47 and 48.
71. hd36ohv@hotmail.com message: FOR TRADE: I have an outer cover for a rightside (OHV) HD bug scoop air intake horn and a leftside (SV) backing plate. Neither is perfect but both are very restorable. I would like to trade either for the correct one so I can have a complete unit.
Thanks
70. 46knucklehead@cebridge.net message: NEED:
-for '46 Knucklehead
NOS front frender.
NOS handshift tanks, w/two recessed nuts, for the "curved" style gate,
(NOT the '47 deeply embossed type)
and please, I know what they are and what they are worth...
A thanks for the great site. I appreciate it, along with everyone else.69. burgular@comcast.net message: WANTED : Guide GLASS RH-55 red tail light lense. Must have guidex script & have no cracks or chips, will pay reasonable market value. Must be able to send detailed closeup photos to: burgular@comcast.net or call Elmer at (860) 982-6126
68. indian@indy.rr.com message: Four cylinder bikes and parts. Anything 4 cylinder. Also, anything AMERICAN made in bikes or parts. Have the cash and will travel. 317 201-7777
67. headschmengy@aol.com message: I need an intake manifold for a '74 inch Panhead. 1950 with plumber heads. Don't need the nuts, but will take them. No aftermarket please. Should be about 3 5/8" wide at spigots.
66. info@ace-ltd-usa.com message: WANTED DEAD or ALIVE: 1915 to 1936 motorcycles and parts. Harley, Indian, etc. Also any police or fire related motorcycle parts and accessories. Call Pete 603 396 8355. Thanks again George.
65. RROBERT60@HOTMAIL.COM message: LOOKING FOR NOS REAR FENDER FOR 55 PAN HEAD
64. pigstye13@aol.com message: WANTED ASAP::::::
I am looking for a good used S&S two-throat intake manifold for a PANHEAD.I have the complete carb and manifold (but it's for a shovel) and a complete set of jets but need the correct manifold before I can install it on the 90" Panhead.Hope someone has on stashed.Thanks.............Mutt (903) 873-664463. pigstye13@aol.com message: WANTED ASAP::::::
I am looking for a good used S&S two-throat intake manifold.I have the complete carb and (shovel) manifold and a complete set of jets but need the manifold before I can install it on the 90 Panhead.Hope someone has on stashed.Thanks.............Mutt (903) 873-664462. ebuyou@dm-tech.net message:
I need a set of front wheel spokes and nipples for a WLA.
Spokes....H-D P/N: 3943-30N (8-3/8" QTY: 20) parkerized finish
Spokes....H-D P/N: 3945-30N (5-15/16" QTY: 20) parkerized finish
Nipples....H-D P/N: 3947-16N (QTY: 40) parkerized finish
PLEASE, NO AFTERMARKET. NOS or very, very good used only! There are a lot of WWII surplus floating around so somebody has to have them.
Thank you George for your wonderful site!
Submitted 10 June 0561. ebuyou@dm-tech.net message:
Spokes....H-D P/N: 3945-30N (5-15/16" QTY: 20) parkerized finish
Nipples....H-D P/N: 3947-16N (QTY: 40) parkerized finish
PLEASE, NO AFTERMARKET. NOS or very, very good used only! There are a lot of WWII surplus floating around so somebody has to have them.
Thank you George for your wonderful site!
Submitted 10 June 0560. theknucklehead@hotmail.com message: Searching for a 1940's motorcycle license plate frame. These were a "tubular" style that was adjustable and fit ar
