GEORGE'S WORLD WIDE ANTIQUE MOTORCYCLE TRADER

Try These Motorcycle Books

 

WANTED

Please Use Section labeled "Feedback on Buyer's and Sellers" For Comments Other Than "Wanted" Ads.

Only "Wanted" Ads Here Please.

275. caravel3@msn.com message: oil lines for 1955 to 1957 FLH Panhead. Must be in good shape no dings. Need the vent line ( one closest to the frame and rear head)

274. dmk441@yahoo.com message: I'm looking for 1919 Excelsior connecting rods, email me if you have any, reproduction are fine, thanks.
Dave

273. hotrodndn*@att.net message: need repairable tank [rust holes ok]for 25 Scout.need right side 33-35 Jr. Scout tank[have 36 up tank for trade]. need curved Indian headlight nacell emblem for 59 Chief.[ have nice 54-58 aluminum fender Chief head for trade]. need Whizzer mounts, exhaust ect. Thanks for the site George. omit * when replieing.

272. bigyellowt@yahoo.com message: Wanted to Buy pre 1916 motorcycle in orig.paint old survivor barn find type,will pay your price, rarer the better!call Vince at 530 305 6979 anytime day or night or email photos to bigyellowt@yahoo.com

271. softtail5@hotmail.com message: looking for a carb, manifold and hot coil for a 27 jd. also a number side case for a 68 shovelhead. thanks curtis

270. tomi.hocevar@live.com message: I am looking for a WLA or similar H-D models.Can be a basketcase as long as all the parts are there. located in San Diego CA.

269. dpatch2@kc.rr.com message: need 1955 -56 Panhead tanks have 48-50 and 51-53 to trade or will buy out right no rust. Dan 913 268 5314

268. parkent@roadrunner.com message: looking for a 58 right side panhead case. 58-62 will work but would like a 58 but open to others thanks Bob

267. gkonz29744@aol.com message: Hello,
Still looking for a salvage Indian chief frame 35' to 39'. Need center kicker post. Anything out there $$$$$$$. 320-333-7258

266. theknucklehead@hotmail.com message: Wanted: CURVED SPOTLIGHT BAR for Harley Knucklehead. Will pay top dollar!!

265. ehbplummer@aol.com message: looking for all parts for a 1980 390 CR Husqvarna

264. pigstye13@aol.com message: WANTED::: 40 N.O.S. 43027-30 short side spokes for the 18" Harley 45" FRONT wheel. 5 15/16" long. Also need one nice OEM 45 rear brake shoe 41806-41 (I have linings and rivets). 1940-1960 NOS and good OEM Parts to trade or cash. Thanks...............Mutt 6/21/09

263. henn@geloman.de message: Looking for a single cylinder Indian Hedstrom motor.Any year.Christian

262. svenawold@yahoo.no message: Hello! Do you have any parts for a 1912 Harley Davidson 8xe v-twin?
Such as motorblock,motorparts, wheels etc.
With regards Sven Wold

261. tjvetlaw@aol.com message: Looking for Excelsior Super X project/complete bike. Will possibly consider trading 1929 Indian 101 project bike. Thank you Robert

260. tomgmcbride@yahoo.com message: I am looking for a 1934 VLD Rear Brake Drum. Any leads will be appreciated.

Thank you,
Respectfully,
Tom
tomgmcbride @ Yahoo . com

259. MONUKES@PEOPLEPC.COM message: HARLEY FLH FRONT FENDER 63-64 WITH ORIGINAL HI FI PURPLE PAINT

258. monukes@peoplepc.com message: HARLEY 1943 BIG TWIN FRAME. PREFER CLEAN , NEAT AND STRAIGHT BUT WILL CONSIDER ON THAT NEEDS ONLY MINOR WORK.41-45 YEARS ARE OK

257. bpk@@valley.net message: Looking for a 1926 Indian Chief motor and trany, prefer 74 cu in, barn fresh-etc. Call 603-298-5799, or drop the extra @ if emailing--Thanks--BPK!!

256. kerashae@gmail.com message: 1937 - 1940 Harley Davidson original Knucklehead Frame. Will trade 1944 knucklehead frame nice

255. kngkong@gmail.com message: need one tall Eaton gas cap for a 37 resto. thanks!

254. fastboyhd$$$@bellsouth.net message: want to buy a set of 41FL engine cases or complete engine with no reproduction parts if that's possible. prefer best quality and with title. will look at all replies and pictures. will buy what i can get. please include price too. may be interested in 43 and 44 also. complete bikes in any condition considered. looking for 37 38 40 43 and 44 to complete collection. remove $$$ from email address. thank you George for giving us a great alternative to the auction site

253. softtail5@hotmail.com message: looking for a carb, manifold and hot coil for a 27 jd. also a number side case for a 68 shovelhead, possible some excelsior stuff. thanks curtis

252. tbarlett@embarqmail.com message: I need a Police style battery for a 1953 Hydra-glide and rear wheel siren.What do you have?Thanks Tom 913-271-4812

251. ulfhd11111@gmx.net message: i need the last part fore my 14 hd twin late modell 9 lug engine a complete rear hub cain drive,ore 2 speed hub,have parts too trade 14 to 15 ore later.remove the 5 ones.amca member 6170 thaks and have fun ulf

250. Kmodel@ yahoo.com message: original paint K-model oil tank with cap bracket and origial patent decal on ebay now! nice rare piece.

249. clsspainting@msn.com message: any servicar parts at a reasonable price. I dont have a lot of money.
I bought a basket servicar and diddn't get what I thought I would get.
I know it's my own fault for not completly checking it out.
I need all kind of parts. please email me if you can help a starving trike owner out.

248. b.mier@comcast.net message: looking for n.o.s wiring for my 49
70224-47 (old number 1741-47)
70144-49
70129-49
70331-48 (old number 4733-48)
70146-49
70128-48 (old number 4705-48)
70160-48 (old number 4701-48)
70209-41 (old number 4706-41)
70193-48 (old number 4706-48)
any of these pieces or looms that you have and are interested in selling I will pay top dollar,name your price
Thanks much

247. lucas_import@yahoo.co.jp message: Hello. I live in japan, I look for ROCKERARM and ROCKERSHAFT of KNUCKLEHEAD for one of them. The reason is because it uses it for my 41FL. I look for the thing of the state of NEW OLD STOCK of the genuine parts. Please be sold to me. I wait for information. lucas_import@yahoo.co.jp

246. meREMOVE@joestuff.com message: Would you by any chance have 4 seat post bushings for mounting pogo style solo seat to early sportster, OEM 51720-52, also in v-twin kit is 31-4020(but they do not sell them seperate). Note, note the seet t-bushing10-2564. meREMOVE@joestuff.com

245. Blakshov@yahoo.com message: i am looking for S&S L series carbs, Spool hubs, Ribbed primary covers, And ribbed fenders. Please let me kniow what you have.

244. vvmc_usa@yahoo.com message: looking for matched set knucklehead cases any year from 1941 to 1947 E,EL,F,FL titled or not,any help would be great thanks

243. ryalew2@yahoo.com message: Wanted; Late '47 HD frame, not the bullneck

242. bigyellowt@yahoo.com message: Wanted to Buy! Orig. paint pre 1916 motorcycle,any make,will pay your price. cell 530 305 6979

241. hd36ohv///@yahoo.com message: Looking to buy a stock 1947/48 HD big twin offset springer. Black or chrome ok. Also need a usable set of 1936 to 1939 HD Knucklehead tanks and have parts or cash to trade. Remove/// to email.

Thanks George

240. hd36ohv///@yahoo.com message: Looking to buy a stock 1947/48 HD big twin offset springer. Black or chrome ok. Also need a usable set of 1916 to 1939 HD Knucklehead tanks and have parts or cash to trade. Remove/// to email.

Thanks George

239. bigyellowt@yahoo.com message: Looking to Buy 1914 Flanders single toolbox that fit's behind the seat down post and in front of the rear fender. will pay cash or trade MC parts or does anyone have a pattern so I can make one ??? cell # 530 305 6979

238. info@buenosairesdeluxe.com message: Desperately wanted:Henderson 1915-1919.Any condition.Even cut-offs considered.Indian Hedstrom motor,any year and parts.Thanks,Christian

237. bigyellowt@yahoo.com message: Wanted to buy ! orig. 1957 Harley Sportster solo seat ,will pay or trade nice orig. 1957 Sportster tandem seat for one also Wanted! 1915 X twin tool box,chain guard,primary cover,exhaust nuts,header pipes,luggage rack and rear hub guts,will pay or have old HD parts to trade . phone 530 305 6979

236. trent@atomiccustom.com message: WANTED Parts for my 48 Panhead-

NICE tanks/emblems. Would like shift gate, shifter, and linkage for tank shift as well.

Footboards and controls.

Dash/speedo.

Also looking for solo seat, oe crusty is fin.. Jeweled preferred.

No junk please.

trent%%%@atomiccustom.com (remove %%%)

235. jokerman15@aol.com message: Looking for GE portamoble and master exec. police motorcycle control head which looks close to the first but different color and plug connection.

234. trichards2flyp51@aol.com message: I'm looking for a 1966 Harley Shovelhead FL or FLH moderately chopped with as stock as possible running gear.

233. **jurassicracing@directv.net** message: early EMBLEM parts for sale around 1917 maybe later ,front fender,handlebars,basket twin engine,maybe a tranny too

232. cabodicks@hotmail.com message: Wanted 46-48 SPRINGER FRONT FENDER WIDE BRACES,, 47-48 LOCKTITE SADDLEBAGS and 49 PAN SERGEANT STRIPES.


Thanks George!!!!!!

231. gkonz29744@aol.com message: Wanted, 1935-1939 salvage Indian Chief frame. I need the center post or kicker post section. 320-333-7258. Thanks Glen

230. hd36ohv///@yahoo.com message: Looking to buy a stock 1947/48 HD big twin offset springer. Black or chrome ok and have parts or cash to trade. Remove/// to email.

Thanks George

229. jim.snow@co.pierce.wi.us message: NEED A 47 OFFSET SPRINGER COMPLETE FOR 47 FL TO FINISH .PLEASE HELP THANKS

228. tbarlett@embarqmail.com message: Need 46-47 Bull neck frame and offset riqid (rear fork)for my 47 UL.I have a nice late B.T. inline fork to trade for offset fork.Thanks Tom 913-271-4812

227. emer974@charter.net message: Looking for one or more rods for 1940 Indian Four. Have 2 early rods without removable bolts. Thanks George

226. mph3000@aol.com message: need a 1914 excelsior twin belt drive frame. also need a rear case to a 1915 hd twin thanks george

226. mph3000@aol.com message: need a 1914 excelsior twin belt drive frame. also need a rear case to a 1915 hd twin thanks george

225. mph3000@aol.com message: need a 1914 excelsior twin belt drive frame. also need a rear case to a 1915 hd twin thanks george

224. mlang6@cogeco.ca message: WANTED wide front fender brace for 46knuckle springer. 905-815-7782

223. mlang6@cogeco.ca message: WANTED late style springer rockers for 46Knuckle. Raised bosses, SC-3A and SC-4A markings, prefer no Chrome. 905-815-7782

222. culdude @hotmail.com message: Hello,
I need a vin side Panhead case with good numbers, title not important. Nor is condition of case it self. Prefer 48-49 but will consider all.
Thanks! Remove space from email to reach me.

221. indian_29@hotmail.com message: Toolbox for 20's Harley magneto model wanted.

220. bigyellowt@yahoo.com message: Looking to buy! mid 1930's streamline bodied motorcycle,any make,even hand made one off's are fine also looking for any barn find motorcycles and parts. call 530 305 6979

219. softtail5@hotmail.com message: i need two 21 x 3 40 holes clinter rims, 68 number side case for my shovelhead, JD luggage rack. thanks

218. dlepperd@rochelle.net message: Sorry! should have mentioned the backing plate and hub are for a Big Twin

217. dlepperd@rochelle.net message: Looking for rear brake backing plate plus hardware and star wheel hub for a rigid.

216. wr_racer@hotmail.com message: looking to get a matching set of knucklehead cases 46/47 e,el,f,fl.thanks for any leads

215. theknucklehead@hotmail.com message: Wanted: CURVED SPOTLIGHT BAR FOR HARLEY KNUCKLEHEAD, FLATHEAD.
BLACK OR CHROME OK. THANKS

214. tbarlett@embarqmail.com message: Need a good set of 1947 Knucklehead tanks,have a really nice set of 1941-46 UL tanks or cash to trade.Tom 913-271-4812

213. pigstye13@aol.com message: WANTED : NOS Harley 45 seat post (pogo stick) or atleast the tube itself. I have NOS springs and spacers and rod and such.
21 May 09

212. bigyellowt@yahoo.com message: Looking to buy a set of orig. Curtiss spark plugs for a 09 Curtiss twin

211. wadams8624@aol.com message: wanted - orig restorable 33 VL fenders- have decent orig 34-up fenders for trade

210. softtail5@hotmail.com message: i need two 21 x 3 40 holes clinter rims, 68 number side case for my shovelhead, poss pre 1930 american engine.

209. caseyjm2@hotmail.com message: Looking for a luggage rack, or parts of one, for K Model or early Sportster.

208. davesvc@netzero.com88 message: Looking for a original exhaust pipe for a 1911 harley single, rusty pitted ok,just the pipe i have the muffler, 1910 to 1913 i think is the same,also need the L shaped pedal crank arm for the left hand side for same bike,1910 to 1913 i think is the same,bike is all orig. just need these to complete,Thanks,take the 88 out of the email address when emailing

207. bigyellowt@yahoo.com message: Looking to buy a odd pre 1916 motorcycle,twin or single,barn fresh is great,also have good motorcycles to trade if money does not work for you??? my cell is 530 305-6979 call anytime

206. duda@rduda.com message: Wanted Box lid for 1936 Servi. Can send photo and measurements. I will be at Rhinebeck if you have one. Call 802-888-7689 evenings, thanks

205. cabodicks@hotmail.com message: Looking for 47-48 SPRINGER FRONT FENDER and 47-48 LOCKTITE SADDLEBAGS in good condition

Thanks George

204. stefan@ecn.net.au message: wanted indian 1928-32 four engine or part engine.thanks

203. massbro@pacbell.net message: Someone interested in my restored 1948 SERVI.

202. alvin65_99@yahoo.com message: Looking for original paint tanks & fenders for a 47 Knuck,The blue would be great but interested in any for 47.Call Al 724 333 5469 THANK YOU !!George

201. Jack.Jordan@universalensco.com message: looking for a '37 to '47 chief/Indian 4 unrestored,complete or near, prefer 39 or 40,with no welding on cases. reward for recovery of barn fresh builder. USA only,sight before buy. Thanks JNJ

200. 2cam@harley-memories.com message: WANTED! rear hub for 1918 harley. Thanks George!

199. arth.mac@verizon.net message: Need a set of gas tanks to fit a 1917 powerplus. Need to have some original paint. Bike is very original with 75% of its paint, but tanks were not useable. Have a very nice clean pair for trade in exchange, if needed. Last piece of the puzzle.

198. hotrodndn@att.net* message: Wanted 25 Scout tank,fenders,80mph corbin. Have good trades[1o1,jr.,sport,40 up chief parts. Want to trade a 90 HD Springer for an interesting antique m/c trade. Thanks[ omit * when responding]

197. dmk441@yahoo.com message: Wanted: Any Yale Parts. Any Pre 1915 Motorcycle engine, Single or Twin, any condition. 1916-1920 Indian Powerplus Tranny, other misc. early parts wanted as well, wheels, seats, lights, etc. Send me an email if you have any of these items, Thanks George
Dave
AMCA#1388

196. alvin65_99@yahoo.com message: looking for a pair of oem mufflers for a 1972 flh or just one would be good,thanks,Al Thank You,George!!!!!

195. hythunder@aol.com message: Also have 1940 leaf spring front end for indian will trade for good one for 47 chief might consider tradin 47 chief basket case for ???????????? 90% complete, new bottom end. thanx Sam in Az.

194. hythunder@aol.com message: Need parts for 1947 Chief, neck cups,intake manifold, front spool or wheel, have xtra,rear brake drum assembly, tranny case,engine cases, 741 engine cases with clyinders and heads for trading material, also a 42 WLA, been mondernized, for tradin. thanx Sam in Az.

193. pigstye13@aol.com message: WANTED: matched set of 1941 or 1949 WL cases with good Factory stamped VIN. Cash or trade. Thanks
Mutt

192. bike@antiquebikeparts.com message: WANTED JOHNSON, MERKEL, HENDEE, SMITH, BRIGGS, MOTORWHEEL PARTS AND EVANS ROCHESTER CYCLEMOTOR CYCLE MOTOR POWER CYCLE POWERCYCLE -WHIZZER ENGINES KITS PARTS- ANY USA BICYCLE MOTORS/"STUFF"...ONE OR A WHOLE COLLECTION ESP NEED
orig paint JOHNSON MW TANK- ANY COND INCL REPRO MERKEL FENDER/MOUNT. ANY COND EVANS TANK... BIKE@ANTIQUEBIKEPARTS.COM
THANKS GEORGE!

191. oldmill@kingston.net message: Wanted FULL WHEEL DISC COVERS TO FIT CIRCA 1927 HENDERSON DELUXE, ORIGINAL OR REPOP OK. HAS ANYONE EVER REPOPPED THESE COOL ITEMS? WERE THE ORIGINALS SOLD OR MADE BY BALLAK? INFO SOUGHT. LET'S GET SOME MADE! THANKS, BARRY

190. canderson88@yahoo.com message: Looking for a Scout project bike. Chris. NorCal.

189. nowbehere2003@yahoo.com message: Need a solid rim, 16" for a servi car harley..2 3/4" spacing small ceneter..
thanks

188. gdwrench39##@aol.com message: Looking for 65 pan motor or case(s). Clean numbers a must. Thanks
Remove ## from email address to respond.

187. 50pan@bellsouth.net message: Hello, I'm looking for an original 1949-1952 unaltered frame for a 1950 Pan resto. Any help would be great!

Thanks
Pete

186. hogluvr1340@yahoo.com message: Wanted: Harley-Davidson Shovelhead motor, any condition. Would prefer '66-'69 flatside, but will consider all. Cash or will trade my '47 bullneck frame for the right motor.

185. fastboyhd????@bellsouth.net message: i need a good right side 61-62 gas tank for panhead. i have a nice pair of 48-50 to trade or will buy cash outright. 48-50 need emblem mounts put back on. would also like to buy a good pair of 51-53 left hand shift 45 tanks. also looking for nos to good sleevable front knucklehead cylinder for 74 5 fin. remove the ???? from email. thank you george for keeping this site going

184. hd36ohv///@yahoo.com message: I have 2 front late (1939 and newer) UL tappet blocks I would like to trade for 2 late rears. Remove /// to email.

Thanks George for the sight. Jerry

183. jana3076@yahoo.com message: Looking for the front fender for the 1912 thru 1914 Excelsior Autocycle. E-mail or call (714) 241-7307
Thanks, Marty

182. cabodicks@hotmail.com message: Need 46-48 Front fender springer and 48 Locktite saddlebags in good condition.
Thanks

181. Rudy4536@aol.com message: need nice 47FL speedo cable for a rider

180. b.mier@comcast.net message: ******WANTED***** full can of Harley Davidson PEACOCK BLUE or METALLIC CONGO GREEN paint for 1949 Name your price, 1/4 pint 1/2 pint whatever you have,Thanks much

179. bigyellowt@yahoo.com message: Wanted Merkel twin motor email bigyellowt@yahoo.com or call 530 305 6979

178. areyou@stillthere.com message: Just seeing if the board is still active.

177. b.mier@comcast.net message: looking for n.o.s. heavy seat spring set 51771-29 as well as any single piece or multiple piece wiring harnesses for early panhead

176. valron@atlanticbb.net message: WANTED: LOOKIN' FOR LEFT SIDE TANK FOR '47-'48 BIG TWIN FLATTY WITH TANK EMBLEM MOUNT AND DECENT TABS. WHAT DO YOU HAVE? THANKS, RON.

175. rickmeister64@aol.com message: Need parts for 50's servicar restoration, transmission, generator, distributer, carberator,tank trim top and sides, gauges. I got injured and can't do two wheels anymore but want to be in the wind.

174. 2cam@harley-memories.com message: Search a 1918 Harley J rear brake. Make offer.

174. 2cam@harley-memories.com message: Search a 1918 Harley J rear brake. Make offer.

173. jcsrestoration@yahoo.com message: Wanted: pre 1915 Motorcycle Engines, tanks, seats, wheels, and other misc. parts. Yale parts wanted as well. Email me if you have any early parts, thanks George.

Dave

172. whiterh@intship.com message: 1967 FLH, right passenger footpeg, including mounting plate.

171. robronky##@yahoo.com message: need zenith carb.for harley jd remove## from email can pickup at oley

170. bigyellowt@yahoo.com message: Wanted pre 1916 Motorcycles,parts and related items , call to pre arrange deal, Vince 530 305-6979 for the Oley meet.

169. bigyellowt@yahoo.com message: Looking to buy Heigter carb. for pre 1916 motorcycle, missing the glass bowl is fine ,can pick up at the Oley meet. email me or call Vince at 530 305 6979

168. mikesteidley@gmail.com message: Wanted: Stainless steel muffler cover for '49 FL. Must be in good shape! Thanks George!

167. theknucklehead@hotmail.com message: WANTED: SET OF ORIGINAL TANK EMBLEMS FOR 1940-1946 HARLEY. NO JUNK PLEASE!! (these are the chrome plated brass ones)

166. blackjack.qt@live.com message: Looking for a pair 37-50 Servi-car spoked rear wheels. Any assistance would be appreciated.

165. alan@robertsbridgeca.com message: Hello,can anyone help with where I can buy the gas line fittings that were used and offered by Indian on their 40's racer and on the 648,Thank You,Alan

164. bhamster@comcast.net message: Wanted Real bad!!!! Information or leads on a Messinger "1" (number one) seat. Even if I could borrow or rent a pan to copy and recover. Anybody know of anything out there? MUCH thanks 360-815-4426 or bhamster@comcast.net

163. mmatteo43@tiscali.it message: Parts of Motobike Henderson K De luxe 1922, specially gas tank.

162. 2cam@harley-memories.com message: Search a 1918 Harley J rear brake. Make offer.

161. jg48@telefonica.net message: Wanted: 1946 Harley Knucklehead gas tanks, 47-48 Springer front fender(wide braces),49 sargeant rear fender,47-48 Locktite saddlebags.
Thanks George!!

160. indianchoutracer@yahoo.se message: Carb needles for Schebler 1" carbs. High speed needle and low speed needle to fit early harley 45" and Indian 101 scout. Repop or original.

159. me!!!@joestuff.com message: Wanted, Early S+S GB choke assembly and velocity stack, for my period correct hot rod sporty. remove !!! to reply.

158. bigyellowt@yahoo.com message: Want to trade ? I have a 1946 Knucklehead,restored and ready to go,trade for pre 1916 Motorcycle.

157. 50pan@bellsouth.net message: Please I need an unaltered. stright, 1949-53 harley wishbone frame for a 1950 resto. Any help would be appreaciated!

Thanks
Pete

156. hd65flh@comcast.net message: Looking for OEM rear brake drum w/ sprocket for 49EL, should be part number #41400-37

155. pat62pan@hughes.net message: I'm ooking for at least a lid for a set of 1954 police saddlebags. the lid is metal and is approximately 6" by 17". if you have a set of these bags and don't want to break them up, I'm still interested. Oh, Mike Venerable. Don't even bother contacting me, This forum and I are onto your thieving ways. Go get an honest job!

154. marsh1915hd@msn.com message: Wanted any 1915 Harley Original paint parts or any parts that fit 1915 Harley's. I am going to have a restored 1915 Harley twin, three speed for sale this fall.

153. blakshov@yahoo.com message: i am looking for a set of the stelling& hellings brasss risers for the stock bars clamp.

152. kim6723@aol.com message: HELP WANTED : Original paint cycles, unusuals & orphans,1 to collections.WANTED,Pre 1935 hd parts all & any condition, broken junk ok ! WANTED !1929 JDH OEM left case with GOOD #'s.Wanted old patina VL 19" rim cad plated, WANTED---EVERYTHING !!! Thanks George !! Carl 513-407-2575

151. pigstye13@aol.com message: looking for a reverse idler gear, reverse gear and reverse shifting clutch for 1946 ServiCar transmission

150. bhamster@comcast.net message: Wanted any condition Messinger number #1 seat or just the pan. Thanks 360-815-4426 or 360-752-1730.

149. jcsrestoration@yahoo.com message: WANTED: 1909-1912 YALE single motorcycle parts in any condition. Also looking for an early teens front wheel, and a teens era troxel seat/saddle. Email me with what you have, thanks George.

Dave

148. pineco@newsguy.com message: Wanted 1941 and 1957 maryland motorcycle tags. thanks G!

147. hd36ohv///@yahoo.com message: I have need of 2 of the middle length valve tin lowers for a 1938 to 1947 HD knuckle. They go on the front intake and the rear exhaust. The lines are routed different between the 2 but the basic tin is the same. I have the nice front exhaust (long) and the rear intake (short) extra to trade or have cash or what do you need.

Remove /// to email. Thanks George

Jerry

146. hd36ohv///@yahoo.com message: Looking to buy a complete tandem seat for a 1936 and up Knucklehead. Repop OK if anybody makes one. Any information is appreciated. Remove /// to email. Thanks George.

Jerry

145. hd36ohv///@yahoo.com message: Looking to buy a complete seat for a 1936 and up Knucklehead. Repop OK if anybody makes one. Any information is appreciated. Remove /// to email. Thanks George.

Jerry

144. ase55flh@hotmail.com message: I`m looking for a 1942 to 1947 factory Blue original paint knucklehead (FL only),
1949 factory "PEACOCK-BLUE " or "Congo Green" original paint bike.
Please write me for pics and prices.
I`m serious buyer. Thanks

143. hd36ohv///@yahoo.com message: I need an OEM generator for a 1940 Indian military 640 Scout. Needing a rebuild is OK. Remove /// to email

Jerry

142. jg48@telefonica.net message: Be carefully with MIKE VENABLE and JOE CHILBERT fron UK.He is the seem fuking scammer!! Thanks George!!

141. jg48@telefonica.net message: Wanted locktite saddlebags in good condition and 46 knuckle gas tank.

Thanks George!!

140. tlf@hammercreek.com message: Does anyone have an original #3051-30 rear stand for a 30-35 VL they are willing to sell? Doesn't need to be perfect, just something that is serviceable and affordable. Thanks Tom

139. smp915@comcast.net (99) message: Looking for goulding sidecar for Henderson KJ or Indian. good in usable shape

138. claytonrestall@hotmail.com message: Am looking for a 48 pan or ULH restoration project. Have a 41-45 knucklehead frame ($3500), both wheels ($1500), and both fenders ($1200) for sale or trade. Also a 39U motor, complete except carb is a 344 for an Indian Chief, never apart or repaired, turns over fine, have title ($3500). Also have some 37 Big Twin parts ie forks, oil tank. Thanks, George.

137. claytonrestall@hotmail.com message: Am looking for a 48 pan or ULH restoration project. Have a 41-45 knucklehead frame ($3500), both wheels ($1500), and both fenders ($1200) for sale or trade. Also a 39U motor, complete except carb is a 344 for an Indian Chief, never apart or repaired, turns over fine, have title ($3500). Also have some 37 Big Twin parts ie forks, oil tank. Thanks, George.

136. claytonrestall@hotmail.com message: Am looking for a 48 pan or ULH restoration project. Have a 41-45 knucklehead frame ($3500), both wheels ($1500), and both fenders ($1200) for sale or trade. Also a 39U motor, complete except carb is a 344 for an Indian Chief, never apart or repaired, turns over fine, have title ($3500). Also have some 37 Big Twin parts ie forks, oil tank. Thanks, George.

135. clapton824@aol.com message: I'm looking for a 1928 JD Harley with sidecar. Would perfer a bike with front brake. Bike need not be restore cosmetically, but sound mechanically. I want a bike I can take on short runs and rally's around town

thanks George Rich

134. theknucklehead@hotmail.com message: WANTED: 1940-1946 HARLEY TANK EMBLEMS (Brass, non military style). Must be in very good to excellent condition. I have the cash, you have the parts, let's trade!

133. chief348+++@+++juno.com message: Terry, Had the same guy email me saying he had the Clutch Parts I needed. I knew right away he was a scammer. He wanted money sent Western Union for parts he had no photos of. EVERYONE BEWARE of this jerk.

132. marsh1915hd@msn.com message: I just put an add in for MARSH parts. Had a man from London ,UK say he had parts, send money. NO pictures, HE is a THIEF for sure. Steve Slocombe from VLHEAVEN call his call, no work, NO street address,His information is.
Mike Venable
120 Leicester St
London , UK
Cell 4470325568
Don't do busness with him , he is a Thief, Terry Marsh

131. b.mier@comcast.net message: WANTED 49 panhead original saddlebags and buddy or solo seat,looking for good rider usable quality only,name your price. also interested in any n.o.s. wiring single pieces or harneses for panhead and any perfect n.o.s. tires good yesr or firestone 500-16

130. hd36ohv///@yahoo.com message: I need a rear head intake rocker arm for a 1940 to 1947 Harley Davidson Knucklehead OHV. I have front exhaust and rear exhaust arms or other parts to trade.

Remove /// to email.
Thanks

129. nowbehere2003@yahoo.com message: 1929 JDH, I want to thank everyone who replied to my wanted post. But after reviewing the selections, we realized it's just out of our skill level to build. So we are changing gears and looking for a completed, near complete etc. 1929 Harley Davidson JDH or 1928 JDH.
Please call Ruben 619-888-2091 if you have one or can point me in the right direction, thanks for reading.

128. $$4cylchevs@xcelco.on.ca$$ message: 03-30-09 looking for original usable 1940 chief complete exhaust system or any parts for the exhaust. also original used corbin speedo-cable. need info on CDOXXXX essential use chief's from 1940

need items for an original 1914 excelsior single belt drive email if you have anything. need things like large gas caps, troxel seat parts,spokes,rims etc

remove all $$ to email thanks in advance and to you george for the great site

aka HAWG canada

127. bigyellowt@yahoo.com message: Wanted to Buy a 1913 or 14 Wavley single or twin motor. please email or call 530 305 6979

126. LPHFARM@AOL.COM message: WANTED: THE REAR BAND BRAKE CLAMPS,ETC,THAT SECURE THE BAND-BRAKE PLATE TO THE REAR UPPER FRAME TUBE ON A 1927 ISH HARLEY BA. IF OTHER MODELS HAVE THE SAME SET-UP, PLEAE LET ME KNOW. THANK YOU, KERRY IN NORTH FLORIDA

125. ase55flh@hotmail.com message:
Wanted : I`m looking for a 1942 to 1947 factory Blue original paint knucklehead (FL only).
Please write me for pics and prices.
I`m serious buyer. Thanks

124. mogandbassett@comcast.net message: Goulding sidecar hub for HD 45

123. redfernmotorparts@bigpond.com message: Harley-Davidson Panhead 1955/56 front cylinder head wanted.Casting # is 16704-55 by the push rod holes on the underside. Please e me at redfernmotorparts@bigpond.com if you can help. Many thanks and thank you George, Tony.

122. redfernmotorparts@bigpond.com message: Harley-Davidson 1948/1949 Panhead Cylinder heads wanted for my personal ride. Really need the front only, however if someone has a set they will let go, I will go with the set.Please e me at redfernmotorparts@bigpond.com Many thanks and thank you George, Tony.

121. nowbehere2003@yahoo.com message: Looking for a 1929 Harley model JDH, basket preferably..I am located in san diego, Ca, willing to travel, need pictures before the journey, thanks for reading.

120. vvs.moto@gmail.com message: Wanted for 1928 101 Scout gas tank. Engin no. BCE 1365. Thanks, Vic

119. vvs.moto@gmail.com message: Wanted for 1928 101 Scout gas tank. Engin no. BCE 1365. Thanks, Vic

118. 2cam@harley-memories.com message: Hello anyone,
I search complete rear barke for a 1918 harley j
make offer
regards

117. marsh1915hd@msn.com message: I am building a 1904 MARSH motorcycle and need any parts for it. Front wooden wheel, Carb. Also would like to talk with other owners.
Looking for Original paint parts for my 1915 Harley, fenders, tanks. Have many J ,JD parts to trade or cash. Terry Marsh 541-882-2613

116. nowbehere2003@yahoo.com message: Harley Davidson Servi car lid please,email if you can help. Thanks.

115. pat62pan@hughes.net message: I have a set of 1954 police saddlebags. They are metal and approx. 16" long, 5" wide and 5" tall. I need another cover for one side as mine fell off and has gotten pretty banged up. Help me out if you can Thanks

114. mph3000@aol.com message: need 1916 hd twin left case, cam, all mag and drive.

thanks

113. cbabek@verizon.net message: need engine parts for 1922 harley j engine. timing cover, distributor cap, 1 piston ring - thanks -chris

112. craigbgreen@yahoo.com message: I am looking for a 45 front backing plate. Email me the with price, if ya have one.
Thanks
Craig

111. nonne2@hotmail.com message: WANTED : Parts for Harley Davidson 45` model D 1929.

Thanks George

110. Lungyu88@hotmail.com message: 1936 Indian Bobber runner Want to trade? I have Bimmer 635 CSI. Last & best year for the famous ‘shark nose’ sports coupe It is one owner before me. It was female owned, Anything not Excellent cond I replaced.Can email car Pics & $6,000 in rennovation receipts by Bimmer mechanics. This classic Bimmer luxury sport coupe looks & drives like a dream.

109. jg48@telefonica.net message: Hi folks!!
Looking for an original 48 panhead front fender and 49 panhead rear fender.Also need original 1946 Knucklehead gas tank
Thanks in advance

108. hdsneegas@sunflower.com message: Looking for a front fender for a 1918/19 Harley solo J model. 785-842-4314. If no answer please leave a message. Thanks, Jim

107. hickswd@bellsouth.net message: I need a good left side Knuckle case 41-47 in good condition with good, unaltered VIN. Title would be a plus but not necessary, would consider set of cases or complete engine as well.

106. mogandbassett@comcast.net message: Need Junk VL Brake Drums :: Well more a less something rotted or worn to much,,I need 2 good center pieces ( I'm sure they have a proper name ) but circles and arrow point the way... Thanks....

http://i21.photobucket.com/albums/b266/brookridgefarms/vlhubinsert.jpg

105. indianchoutracer@yahoo.se message: Motolamp for 1934 Harley wanted.

104. bck1953@gmial.com message: Wanted solid wheels for 55 servicar

103. softtail5@hotmail.com message: i need the rear part of the chain guard for a 741 scout.and one intake nut for a 12-14 excelsior. thanks curtis

102. rudy4536@aol.com message: Wanted correct oil filter bracket for a knucklehead, mounts to the rear rocker housing bolt. Thanks Rudy4536@aol.com

101. bobmac56@hotmail.com message: Looking for an orginal paint (hi fi blue) front fender for a 1969 Electra glide. bobmac56@hotmail.com

100. indianchoutracer@yahoo.se message: 1962 matching Panhead cases with nice numbers.

99. softtail5@hotmail.com message: i need one intake nut for a 12-14 excelsior. thanks curtis

98. Stafford_9@msn.com message: Looking for a 1940 to 1942 Indian Four frame for sale.

97. bobbothefist@hotmail.com message: I would like to trade my German WW2 collection for a motorcycle. The collection consists of over 200 items if you include coinage and paper moneys. There are some WW1 items in there too. I would like 20,000. for my collection if I were to sell it but I would take a bike worth 15,000. in trade. Email me and I can send pictures or please call Bob at 1-204-582-0257 Canada Thank you and have a great day and that means you too George. :^)

96. dwells$$$@$$$straussystems.com message: Looking for sport scout racer project , rolling chassis and or powerplant, remove$ from email and send info.

95. bj98741@yahoo.com message: I'm looking for a HD flathead bike to ride around on, not show. Would prefer a 45. Does not need to be stock or even nice! Drop me a line if you have one - Chicago area but have a truck and trailer, will travel.
**bj98741@yahoo.com**
No stars in email.

94. junkerbikes@roadrunner.com message: Please help me, i need an old used 28" clencher tire so i can roll my bike around the shop.please call 740-663-5010

93. chief348(((@)))juno.com message: Wanted; 3-5-09 Looking for 36 to 40 HD Big Twin narrow Clutch Basket Parts. I need some Steel Clutch Discs both Solid and the Slotted one. Check your Swap Meet Milk Crates! I can email photos of the ones I need if you are not sure?? I have a lot of other Narrow Clutch Parts to trade or will buy yours outright for cash. Delete the ((( ))) when emailing. THANKS GEORGE

92. mahd@telia.com message: Wanted for 1917 powerplus , oil tank , kick shaft and bracket, primary cover, rear fender, front spring, flexi shafts, clutch pedal. Wanted for 1920 Powerplus, fuel tank, handlebar, rear fender. Have trade parts for powerplus, early scout, HD pocket valves 1917-29. Mike

91. me!!!@joestuff.com message: Wanted, 69002-47C horn, or horn cover. This is the 62-63 XLCH/servi care horn with one big round hole in the face, and six smaller holes aroung id. remove !!! to reply

Also looking for a red(not metal flake) and white or white and white buddy seat cover.

thanks George

90. ckirkLL6882@aol.com message: ckirkLL6882@aol dot com i am looking for a 68 69 xlch front end and aluminum rims front and back hoping to find a complete front end if you have any xlch parts let me know what you have. thanks

89. dmk441@yahoo.com message: I'm looking for an early motorcycle engine, a single cylinder is fine, pre 1920, also am looking for any indian powerplus parts, email me if you have a spare you'd sell, thanks.

Dave

88. jimfonz@aol.com message: looking for a kicker gear, a front rim ,clutch hand engager and hand gear shifter with rods for my 1916 powerplus indian....thanks george

87. henn@geloman.de message: Henderson pre 1917 motor wanted.Would consider a cut -off motor.Thanks,Christian

86. indianchoutracer@yahoo.se message: Schebler HX-138 or Schebler De Luxe DLX-13.

85. craigbgreen@yahoo.com message: I loooking for a rear axle 1932-34 spool hub off a harley 45.

84. blakshov@yahoo.com message: I am looking for for a ribbed primary cover for pan or knuck. also Bates seats and p pads, S&S L seriers carbs,cce roth linkert breathers, ribbed fenders, spool hubs or anything chopper realted

83. indianchoutracer@yahoo.se message: hedstrom oil pump wanted.

82. theknucklehead@hotmail.com message: WANTED: Old style Harley servicar/sidecar front parking brake assembly. I need the thumb lock portion or will buy the whole assembly.

81. softtail5@hotmail.com message: help!!! i need one front pocket valve set up complete, (intake valve and guide) for a 15-19 excelsior. i need one intake nut for a 14 excelsior. thanks curtis

80. manlis1@aol.com message: looking for a 3 bolt 45 solo frame..in NC

79. popsflat@@@@charter.net message:
for a 45" harley solo
I'm in need of 2 of the front brackets that bolt the fender to the frame under the seat on the rear fender
if you got a junk fender or 2 laying around i'd give you $40 for that little l bracket take out the extra @@@@ in the email addr to email me

78. dmk441@yahoo.com message: Wanted: 1920s era Indian Scout parts or project, any condition. Frame, motor, forks, wheels, etc. email me at dmk441@yahoo.com if you have any spares in the shed, thanks.

Dave

77. mogandbassett@comcast.net message: Harley Servi-car Hyd,, Master Cylinder Mount.

76. mogandbassett@comcast.net message: Need Harley VL hub

75. freek49@hotmail.com message: I am looking for a police two way radio for me harley panhead 1950.
Also a radio rack and other parts to make it in a complete set (Vetric, Avia or Motorola) Email to freek49@hotmail.com
kind regards frederik Steppe

74. bigyellowt@yahoo.com message: Wanted to buy big stash of old Motorcycles and parts ,if you have a barn fresh load and lost your 401 K or your stock market money ect. and want to sell call 530 305 6979 or email bigyellowt@yahoo.com

73. hd36ohvzzz@yahoo.com message: I need a 3 rivot rear chain guard, headlight bracket and oil tank bracket that mounts the rear chain guard for a 1936 to 1940 HD big twin - repop ok.

Remove zzz to email.

Thanks for a good time George.

72. hd36ohvzzz@yahoo.com message: I need a 3 rivot rear chain guard, headlight bracket and oil tank bracket that mounts the rear chain guard for a 1936 to 1940 HD big twin - repop ok.

Thanks for a good time George.

71. bpalbee@yahoo.com message: Wanted 1934 or 1935-39 Indian Chief forks. (29 inch long) Have a set of the Essential use civilian (43-45 31 inch long) forks for sale or trade.

43-45 essential use chain guard to trade for early 30s chief chain guard.

Need either 1934 style front and rear fender or 35-39 style front fender.

Brian (425)749-2924

70. retaylor01@bellsouth.net message: I have a 1913 Indian Motorcycle engine for sale or trade for restorable bike.

69. dantana003@aol.com message: Looking for gas caps for a 1948FL and a luggage rack

68. heinz1905@yahoo.de message: Hello,I´am looking for an Indian racer frame,TT or something like this. Thank you!

67. hd36ohvzzz@yahoo.com message: I need a late flat bottomed front rocker box for a 1947 HD knucklehead - have earlier front or most any vintage rear to trade or cash. Need a 1947 HD speedometer have cash or can trade 1938 thru 1946.

Remove zzz to email. Thanks George for a good site.

66. fredrik@vildabomben.com message: Excelsior Big X 1915 & 1919 parts wanted, For 1915; Transmission, clutch parts, rear brake, foot pedals tool box, seat parts except leather. For 1919; Rear stand, front and rear fenders, footboards, front fork, front hub, oiltank/toolbox, seat post, seat comlete with mounting. handlebars and linkages. Have som spares for trade.

65. softtail5@hotmail.com message: i need a pocket vavle set up for a 15-19 exelsior. i need the intake nuts for a 12-14 excelsior. some one out there has to have one. i have pre 12 excelsior single pocket valve set up to trade or cash.

64. pigstye13@aol.com message: WANTED: Need a good used 45 top motor mount (for aluminum heads) and also carb mounting bracket for the float bowl for same
Mutt

63. fatdog1903xx@yahoo.com message: Wanted for 1914 Harley Single project. Freewheel clutch, eccentric parts, '15 single gas tanks, CASH$$$ available. It is time to turn those rusty parts that you will never make a bike out of in to cold hard cash! I also have tons 'o stuff to trade that I would not get rid of on a bet! nows the time! Help me finish this thing! I do not sell my bikes... This is for a personal project that will get built and run at meets for all to enjoy! Ride 'em, don't hide 'em! Remove xx's in email! Come on all you old timers! turn that stuff you've been hoarding into cash that your kids can spend!

62. pigstye13@aol.com message: Wanted: right and or left fuel tanks for 1950 Panhead. Anybody got either (or both) for sale?

61. MASTERGDCA@yahoo.com message: FRONT END WANTED!

60. MASTERGDCA@yahoo.com message: WANTED!!! 1960 Panhead, FLH Dou-glide front end.Would like to have a complete one minus the sheet metal. Will consider parts. There are so many chopped out '60 pans out there, someone HAS to have a front end lying about somewhere. Thanks for your help. Feel free to call at (757)-771-4139 William

59. wadams8624@aol.com message: ACE Frame Wanted Serial# D- Trade restorable Serial # A Frame or Ca$h
ACE short tank wanted -trade early restorable long tank or Ca$h
Walt (949) 375-0836

58. stefan@ecn.net.au message: harley 1919 opposed twin brake pedal,footboard bracket & footboard wanted. thanks peter

57. makingeights@gmail.com message: I need a 47 knucklehead transmission...I have a 41 tranny for possible trade.

56. devidoldmoto@yahoo.it message: Harley frame wanted

I look for a 1920-1924 Harley J,JD,F frame and complete front fork.
Please if you can help me, please send me email to devidoldmoto@yahoo.it

Thanks.

55. info@trinitymotorworks.com message: WANTED: INDIAN 101 Scout Bikes, Projects, Parts. Also Indian 401, 402 Original Bike, running or close to running. Rough originals ok too. Have cash or Indian parts, projects and bikes to trade. 570-460-8123

54. bigyellowt@yahoo.com message: Wanted to Buy a PEM,Wavery,Jefferson motor, single or twin. have good trades if money does not do it? call 530 305 6979

53. carletonlathrop@hotmail.com message: I'm looking for '36-'40 clutch parts;
2281-36A mainshaft ball bearing nut & lockwaher
(2)2284-36A bearing race retaining ring
2485-12 rivets,clutch friction disc.
3803-36 chain guard (inner)
3801-36A chain guard (outer)

52. ?esmcsm7304?@att.net message: Wanted : Late Indian Chief head bolts with a "N" head marking or
"captains wheel" head marking, any condition OK . Leave out the two
? to email me. Thanks

51. jana3076@yahoo.com message: Looking for the front fender for 1912 thru 1914 Excelsior Autocycle.
Thanks, Marty

50. mstreahle@hotmail.com message: 02/14/2009 WANTED 41-46 Fat bob tanks. Have 51-53 tanks will consider trade or partial trade based on conditon.

49. fatdog1903xx@yahoo.com message: Wanted parts for 1914 Harley-Davidson single speed project especially eccentric parts, and rear single speed hub and freewheel clutch. Have lots to trade and cash! Remove xx's from email

48. bigyellowt@yahoo.com message: Wanted to Buy 1901 to 1915 Motorcycles and parts email bigyellowt@yahoo.com or call 530 305 6979

47. monukes@peoplepc.com message: MILITARY 43 HD BIG TWIN FRONT FENDER. NO WLA FENDERS PLEASE

46. monukes@peoplepc.com message: 63-64 HI FI Purple FL Front fender. ORIGINAL PAINT!!!!

45. hd36ohvxxx@yahoo.com message: 1936 HD OHV stuff - repop ok: rear stand & catch, 2 hole rocker clutch mount, brake drum & backing plate, gas shut offs (both tanks), oil lines, gas lines, solo seat & 'T', brake light switch, top motor mount, brake clutch and shift linkages.

Remove xxx to email. Thanks George

44. softtail5@hotmail.com message: looking for pocket vavle setup complete for my 19 excelsior. need intake and exaust nuts for a 14 excelsior. side stand complete for a harley 45

43. heinz1905@yahoo.de message: I´am looking for Indian 8-valve "big base" parts.

42. l.pallack@chlmd.com message: Looking for a 1942 or 1943 WLA Harley Davidson Liberator to buy. Would like to restore it so any condition would be acceptable.

41. amcayouthprogram@hotmail.com message: Hi everybody,
I need a 1938 Indian, it doesn't matter what model it is, it just needs to be a 38. Thanks for your help.
best regards,
Matt Olsen
605-228-4334

40. oldmill@kingston.net message: WANTED PARTS AND INFORMATION FOR FULL FLXI SIDECARS BARRY 1-613-273-5036

39. pans** rule**@yahoo.com message: I`m looking for a RH-55 taillight body that has factory-original HiFi blue paint on it. I believe the HiFi blue was on 62-67 pans & shovels. I would buy the whole taillight if the price is right, but only need the body. Take out the **** to email me. Put taillight in subject so I`ll open it. Thanks! Ross

38. fullertonwelding$$$@$$$sbcglobal.net message: Wanted knucklehead rear motor/trans mount with large forging numbers XE-624 will pay cash. I do have a panhead mount with the smaller forging numbers if someone would rather trade. Delete the $$$ $$$ from email to contact me.

37. dkafton@clearwire.net message: WANTED: 2-8-09, For 1912 H-D , I need a belt tentioning lever or just the lower casting so I can make my own. I also need a pinion shaft for a 1918 Reading Standard. Thanks, Dave (209)368-7259

36. dkafton@clearwire.net message: WANTED: 2-8-09, Lid and fenders for a 1947 H-D servicar. Also need for 1915 H-D,shift gate, rear brake drum,intake manifold and a Bosch ZEV magneto. Thanks, Dave (209)368-7259

35. lbhill1@comcast.net message: 1928-29 JD parts, engine, fenders, wanted. Thanks, Cory 603-674-7226

34. grinch@airmail.net message: Wanted: Sidecar brake lever part 6187-30. For 32 Harley sidecar
restoration. grinch@airmail.net

33. **dks60**@sbcglobal.net message: In search of a front fender for a 45 ci WL in restorable condition. Remove *s from email. Thanks George!

32. softtail5@hotmail.com message: i need a pocket vavle set up for a 15-19 exelsior. i need the intake nuts for a 12-14 excelsior. also a side stand complete for a harley 45. thanks curtis

31. oaneskt@dishmail.net message: 34-36 VL Front Fender Wanted. Looking for a nice fender to finish a project before the spring riding season. Also need a ride control assembly. Have 30s-50s HD Parts to trade or cash. Thanks for looking.

30. alvin65_99@yahoo.com message: Looking for mid star hub wheels,10 inch rotor & original goodyear tires for 72 flh also chain guard & original windshield,also windshield for 64 Duo Glide.Thanks George,

29. duda@rduda.com message: wanted, lid for 36 servi box, Richard 802-888-7689

28. clb393@hotmail.com message: 1926-1934 Harley B flathead single engine parts. In particular i'm in search of a service/shop manual, a valve tappet bushing, and valve guides. Thanks very much!

27. junkerbikes@roadrunner.com message: Please help, i need a 28" clencher tire,preferrabally old used ugly white,any condition as long as i can install to roll my bike around,thanks,sharpy 740-663-5010

26. dantana003@aol.com message: Looking for a front fender light and speedometer for a 1948FL

25. pineco@newsguy.com message: Looking for tag bracket that mounts to tombstone taillight .need tag bracket only,with concave screw holes 2 holes ,with guide marking ..Thanks G.

24. thelooseends***band@gmail.com message: 1-31-09 WANTED: Harley (45) WR and KR rear knockoff spool SPROCKETS...need 48T, 44T, 42T, 38T and others....also, WR transmission close-ratio gearset, and 15T and 16T transmission sprockets.....and any other interesting WR stuff! Thanks! Call: 417-276-9908 (romove *** from email address)

23. papabearjkt*!@yahoo.com message: INDIAN 46-8 neck TEE bottom with or without brass bushings, will trade 41-2 SPORT SCOUT 16" Wheel RIM ONLY, straight , no dowaps, can paint or powdercoat, but if you need chrome this one will need prep work build up in some areas to make perfect. ORIGINAL with 41 stamps one inside rim. RIM has been cleaned ready for your finish. Good useable if you need one and gotta have the real thing. May consider other trades.

22. kirkmarlow@ymail.com message: 66-69 cases-have everything else 74c,i,-hd or poss aftermarket-or sell 60 roller for2800.00-fx fr/end-17157724559

21. gofarfast**@**gmail.com message: WANTED: A resource for early Harley-Davidson engine numbering ranges.
A book, faxed page, website location anything would be appreciated as long as it is reliable data. Send to gofarfast**@**gmail.com Remove the ** before and after @ sign.
Thanks in advance!

20. pansrule@yahoo.com message: I need an original paint Hi Fi Blue front fender for 65 Pan. I`m not sure what years interchange!? Doesn`t have to be real nice,but original! Will buy or trade-Email me!

19. utehk68@yahoo.com message: I need a servicar box and all related parts and hardware for 1940-1946

18. proto60pan@mchsi.com message: USED PANHEAD CABLE WANTED: I am looking for a used clothe covered mousetrap cable for an original paint 59 panhead. Must be a used original with clothe cover. I will pay much more that it is worth. Can you help me? (563)320-2014 -Brad

17. makingeights@gmail.com message: I need a stock, 47 late model knuck frame.

16. blakshov@yahoo.com message: I am looking for S&S L series carbs, spool hubs, Borrani 18,19 and 21 inch 40 hole rims, english fenders and tanks, Gme tank with center rib, Imperial Finned Primary cover and a vl springer top clamp. Please let me know waht you have.

15. hjn@orbital.dk message: Searching for original Flathead/Knucklehead UL/FL 1936-39 Toolbox, want to exchange with original Harley toolbox WL or VL.
Ask for pictures.
Thanks George.

14. bigyellowt@yahoo.com message: Wanted orig. paint Motorcycles 1901 to 1939,also old drag bikes and pre 1916 parts of any kind please email photos and prices or call 530 305 6979 can pick up anywere in the U.S.

13. RANDYP@BILLKAYCHRYSLERNAPERVILLE.COM message: 1950-1952 PANHEAD SADDLEBAGS

OEM- HARLEY DAVIDSON SADDLEBAGS

GENUINE HARLEY DAVIDSON SADDLE BAGS PART# 90994-48 WITH RED PIPPING. I HAVE HAD THESE FOR A LONG TIME AND THEY WERE TAKEN CARE OF IN STORAGE. THERE ARE NO TEARS OR RIPS IN THESE AND THE LEATHER IS IN GREAT SHAPE. 5 BUCKLES AND THE SIX FRONT STRAPS WERE REPLACED YEARS AGO.

LISTED ON E-BAY ITEM# 390025910977 $1000.00 OBO
CALL 630-355-7500 EXT-32 OR EMAIL ME
RANDYP@BILLKAYCHRYSLERNAPERVILLE.COM

12. dmk441@yahoo.com message: Wanted: Early motorcycle engines and chassis, any type, any condition, mainly 1910-1940 stuff. Email me with what you have, a price, contact number, and we can go from there, thanks.
Dave
AMCA#1388
dmk441@yahoo.com

11. campheidewald@web.de message: Wanted to buy! Flying Merkel parts 1913 1914 complete clutch for chain twin,toolbox,backhub,tank,motor,chain guard ring,exhaust lift lever,fenders.

10. panhead30040!!!@yahoo.com message: Need Big Twin Flathead Motor Parts Cam set , heads,1 tappet block set of lifters circut braker 770-888-9101 cyc;e solutions parts to trade or cash thanks...

9. panheads@svtv.com message: looking for a frame for a mid year 34 harley vl.also looking for a knucklehead basket case,or a 33 to 36 vl basket case.eamil me at panheads@svtv.com or call 605-361-7145.thanks

8. proto60pan@mchsi.com message: Wanted: Original paint right side Hi-Fi blue and white gas tank for a 1959 Panhead. (This panhead fell over in the garage and landed on the lawn mower). Screw the lawn mower, I just want to repair the panhead and still keep it original paint. Have cash for a good tank. Do you have one or know someone who does? Please help. (563)320-2014 Brad

7. my46wl@yahoo.com message: I am still looking for a rear brake drum for a 1960 panhead,HD# 41400-58c,NOS or used is fine please help Thanks

6. tprjj**49707@yahoo.com message: Seeking crack free 741 right case half.
Remove asterisks from email address.

5. thelooseends***band@gmail.com message: 1-22-09 Still needing a Harley WR rear flat track hub assembly (the one with the splines for the sprocket). Will buy or trade parts...call: 417-276-9908 (remove the *** in the email addres)
Please let me know if anyone knows of these being repopped as well!!! Thanks!

4. hjjaws@msn.com message: Looking for 1954 model harleys and trucks for sale

3. hogluvr1340@yahoo.com message: Wanted: Harley Davidson 45 I-beam springer front end for 1939 WL. I have a tubular front end to trade, or cash. Thanks George!

2. sjones@edencsd.wnyric.org message: Building a 1940 UL engine for this years class entry into the Donnie Smith Chopper Class Challenge. In need of part #24700-37(new)/356-37B(old. It is the pinion shaft spring that goes behind the scavenger pump drive gear. Last thing we need before assembly.

Please contact with any questions 716-992-3600 ext 2136
Steve Jones
Eden Chopper Class

1. softtail5@hotmail.com message: looking for pocket vavle setup complete for my 19 excelsior. need intake and exaust nuts for a 14 excelsior. side stand complete for a harley 45.

August 2008

383. makingeights@gmail.com message: I need a cycleray headlight and handle bar or any other reasonably priced parts for 47 knucklehead. Also need original 2 piece handlebars for 66 electraglide.

382. junkerbikes@roadrunner.com message: I need a 28 inch clencher tire,old used ugly white,can be bald ,just something i can mount so i can roll my bike around,thanks,sharpy 740-663-5010

381. davesvc@netzero.com$$$ message: Wanted:powerplus indian primary chainguard 1917 to 1922 they may have used the same one up to 1924 want orig.indian no repos Dave H.take the$$$ out of my email address to contact me

380. davesvc@netzero.com$$$ message: Wanted:powerplus indian primary chainguard 1917 to 1922 they may have used the same one up to 1924 want orig.indian no repos Dave H.

379. DPATCH2@KC.RR.COM message: 1955 FLH FENDER BADGE HAVE A 1955 FL TO TRADE OR WILL BUY STRAIGHT OUT DAN 913 268 5314 CELL 913 515 3721

378. vista333@hotmail.com message: Wanted pre 53 Indain motorcycle, perfer Chief might go for Scout. Bike need not be completly orginal, though it helps, aftermarket ok, must run, willing to do cosmetic work only. This will be a daily rider so no high dollar restorations need apply.

377. lardo1981@yahoo.com message: Wanted: NOS Generator for 1964FLH harley Also would like any fancy lights,doo dads,gadgets,chrome balls that I can add on to either my 1948UL or my 64FLH to make them look pritty.Also could use a windshield for either of these bikes.

376. donvito17@comcast.net message: WANTED: ORIGINAL,COMPLETE,1928 or 1929 Harley JDH Motor Or Complete
1928-29 LOWER END Minus Cylinders---Must be in Excellent Rebuildable Condition with Very Good Numbers---No Damaged/Rewelded Cases---
Thank You!---Mike--- (916) 962-2942 or (916) 320-1946

375. valron@atlanticbb.net message: WANTED:LOOKIN' FOR AN ORIGINAL GLASS LENS FOR HARLEY GUIDE SPRINGER FRONT FENDER LIGHT. HAVE EVERYTHING ELSE. MINE WAS DROPPED AND KILLED. ANY HELP GREATLY APPRECIATED. HAVE CASH. E-MAIL "valron@atlanticbb.net"

374. xxfatdog1903@yahoo.com message: Check out some nice rare pieces on ebay now Harley Late 1913-only front axle quill and twin mag control rod. Also flathead airhorn backing plate and delco horn. Search Antique Harley then see other items.

373. craigbgreen@yahoo.com message: I'am looking for 1939 wld, wldd, wldr case or cases. Good stuff or junk, let me know what you have. Thanks

372. $$4cylchevs@xcelco.on.ca$$ message: 01 -16 - 09 wanted for 1940 military chief, need front lower and rear lower fender struts. rear is 15 1/2 inches long with 2 holes spaced 14 3/4 apart. the front is 14 1/2 inches long this strut has 3 holes, first to second holes are 13 inches and 2nd to 3rd is 11/16.
also looking for seat "Y", complete 1940 exhaust or just front header pipes - prefer used. remove all "$$" for correct email put indian parts in heading please
thanks george

371. thelooseendsband@***gmail.com message: 1-16-09 Wanted: Harley WR or KR rear quick change hub (the one with the splines for the sprocket to slip on) Will buy or have parts to trade. Call: 417-276-9908 or email..(remove ***) Thanks!

370. bigyellowt@yahoo.com message: Wanted to Buy Orig. paint motorcycles 1901 to 1939 email photo and price or call 530 305 6979

369. ssusnis@hotmail.com message: looking for original decals for a 1979 flh (wings 2 pieces) any ifo would be appreciated ,these are impossible to find,need for final touch on restoration thanks much steve

368. ssusnis@hotmail.com message: i am looking for the original set of 1979 flh tank decals (the wings 2 pieces


have been looking everywhre no place to be found need to finish restoration any info would be greatly appreciated thanks steve

367. jeff.diamond13@gmail.com message: Trying to locate vl frame 1936-39. Can need work or an old chopper frame that was done poorly. Hope to find 1 in tx. I'm in Houston. Thanks, Jeff.

366. schwarz-s.raumgestaltung@web.de message: search Henderson k 1920-22 transmission case, without Gear - Shifter, or complete in good or bad condition. Please make me an offer with photo

365. mph3000@aol.com message: 1911-13 harley twin cylinders. any condition, can have all fins missing or cracked , rusted , ect. help me reproduce these by selling me your scrap.

364. info@utw-gmbh.com message: looking for any tandem seat parts up from 36 in any condition (no buddyseat)! Thanks, george

363. ospf88@hotmail.com message: I need a right side engine case for a 1966 Harley Davidson XLCH sortster. !957 through 1971 cases should work.

362. oldcycle@rogers.com message: WANTED:1942 Knuckle 61 cu cases or any real sheet metal.Mainly left case ,please no restamped numbers and a need a bill of sale.Have the rest of the engine and bike.thanks Rick

KEEP UP the good work George!!!!

361. russco61@hotmail.com message: I am in iowa and am looking for a servi-car,,thanks

360. thelooseendsband@***gmail.com message: 1-10-09 WANTED: left-hand 1941 Knucklehead motor case with original HD numbers and at least a bill of sale, or a set of '36-'41 Knuckle cases! Thanks! 417-276-9908, (remove the *** in the email address)

359. blkstang0321@yahoo.com message: WANTED PANHEAD LEFT MOTOR CASE
looking for a panhead left side motor case, need something with HD numbers on it,
not interested in anything that has the numbers removed or filled in,
please email me at blkstang0321@yahoo.com
can be from any year, but 48 is preferred
thanks

358. nobodyunonokiddin@gmail.com message: Hello folks, I'am looking for a few police related items for 1957 and older harley-davidson police units, will consider any and all items. Unlike the other one advertising here on this site, I have the greatest respect for preserving the integrity of these fine machines used by our law enforcement agencies for our protection and safety. Any help would be greatly accepted, thankyou

357. cralllen@aol.com message: Wanted older motorcycle license plates.
I have mc. plates from 1912 and up for trade, send me your want list and the ones you have to trade,thanks Charles from Charlotte NC

356. knuck39@yahoo.com message: knucklehead engine cases wanted...any of the following years..37,38,39,40,41,42,43,44.. Have cash or can trade..Please let me know what you have..knuck39@yahoo.com or 707-292-3033

355. bradandrose@genext.net message: Looking for a 1962 Washington motorcycle license plate for my pan. Any help greatly appreciated.

354. frantic.city@gmail.com message: HERE LITTLE PIGGY PIGGY, CMON AND GET THE MONEY FOR THOSE OLE COP BATTERIES, WE'LL EVEN TAKE DEAD OR BUSTED ONES, IT DOESNT GET ANY BETTER THAN THAT, WHEN WAS THE LAST TIME YOU HEARD OF ANYONE PAYING 250 BUCKS FOR DEAD BATTERIES ??? AND I'LL PAY THE SHIPPING, NOW PUT THAT IN THE GLASS PIPE AND THINK ABOUT IT, AS ALWAYS, DROP-DEAD SERIOUS AND GEORGES IS #1

353. dantana003@aol.com message: For 1948 FL, also need tank emblems, dashboard lens

352. dantana003@aol.com message: Looking for : 1948FL parts, tailight housing, air cleaner cover,
front fender light assy., speedometer, handlebar assy.

351. fatdog1903@yahoo.comxx message: Rare Harley leather Club uniform BowTie Ebay # 250352880726 also 1940 only knuck front fender trim and Delco springer horn

350. campheidewald@web.de message: Looking to buy a old pre 1914 Excelsior flat belt single or twin,running or not or other unrestored bikes pre 1920.

349. bigyellowt@yahoo.com message: Wanted to trade RARE set of 1928 Harley Davidson JDH Ricardo racing cy.er's off Sam Opie's personal cut down,will consider trading for a PEM Jefferson Walvery single motor ect. or will sell outright for best cash offer, email for photos or call 530 305 6979

348. jana3076@yahoo.com message: Looking for 1913 Excelsior Autocycle front fender and leaf spring pack and the frame mount tool box.
Call or write to Marty (714) 241-7307 jana3076@yahoo.com

347. tomgmcbride@yahoo.com message: Wanted: California Titled 34VLD Engine cases. Please if you have any leads or suggestion on locating please e-mail me or call me at 310.719.5315 thanks~ Tom

346. kfrnchknt@hotmail.com message: I want a set of 33.4 mm stock usable forks for a 1971 Harley 900 Sportster.

345. obsurfer67@yahoo.com message: looking for MASSACHUSETTS motorcycle plates - 1933, 1945, 1947. any leads appreciated. thanks, george.

344. bigyellowt@yahoo.com message: Wanted OHV motor for PEM,Jefferson,Wavlery,can be a single or twin ,email photo and price or call 530 305 6979 have cash or trade

343. hd36ohvxxx@yahoo.com message: In the previous ad remove "xxx" to email

Thanks Jerry

342. hd36ohvxxx@yahoo.com message: Wanted for 1936 Harley EL knucklehead - repop ok

-complete rear brake
-oil gauge and amp gauge
-rear stand
-2 hole rocker clutch mount bracket
-shift gate and lever

Some parts to trade but not a lot of extra 36 stuff.

Jerry

341. ducati.cyprus@gmail.com message: 1936 EL KNUCKLEHEAD (36 year only) dash.
1936 EL KNUCKLEHEAD (36 year only) oil tank.
1936 EL KNUCKLEHEAD (36 year only) frame.
Please send pics ESPECIALLY THE FRAME!
Thanks!!

340. mblmsmith@***platinum.ca message: Wanted: Schebler DLX 64 carb.(take out the 3***stars to email back)Thanks Mark

339. critto57@hotmail.com message: wanted parts for excelsior big x year models 1915 to1919

338. indianchoutracer@ahoo.se message: 1930-31 Harley DL camcover wanted.

337. thelooseendsband@***gmail.com message: 12-31-08 WANTED TO TRADE: My '41-'early '46 Knuckle frame for '46 Bullneck frame. Can send pics...CALL: 417-276-9908 or email (remove the ***) Thanks!

336. szymon.puchalski@wp.pl message: WLA ,original saddlebags in good complete condition for military HARLEY DAVIDSON WLA my email is: szymon.puchalski@wp.pl

335. phillippe@gmx.ch message: I search a 46-er frame for my knuckle. i have a 41 - 45 perfect frame for trade or cash . no junk parts , please phillippe at freesurf point ch

334. bigyellowt@yahoo.com message: Wanted anymake pre 1916 motorcycle, will trade a 1928 Morton and Britt bodied Sprint race car,runs great with a 4 port overhead motor,dual Windfield carb.'s,mag.,Franklin stering,friction shocks ect.email for photos

333. thelooseends***band@gmail.com message: 12-27-08 WANTED: Missouri Motorcycle "HISTORIC" License Plates...these are the older version with the white background and raised black numbers, and they say "Historic". Please call: 417-276-9908 Thanks and Happy Holidays to all!!!

332. Qtprjj49707@yahoo.com message: Seeking indian scout 741 right case half. Working class stiff assembling a project...remove "Q" from beginning of email address.

331. 2muchfunclub@redwhite&bluedude.org.gov message: Wanted ALL MILITARY BIKES,TRIKES,SIDECARS,Bars,jars,tars,Sorry no SARS,Dykesorkikes Please! Thanks George! Hope Santa brought you all you needed this year! Nextyear BETTER? Only time will tell i suppose, say hi to Rose for me! Later Gator!

330. 77okchief@earthdink.net message: Ida met cha on deyribberbank wit da parts son,jist besure ta bring dey duckets in buckets nowya followme? Knowd whati mean? ida had dirt in dey fuelline but ida hadher blowd dit out~! Kinda rusty 2thoughd'. be'd wait laster 2days rightcheer din brokenbow next to willowtreed! Whair youd bee?

329. toelker**@sbcglobal.net message: Looking for an NOS intake pipe (manifold) for a 47 knuck FL 3 5/8 across the nut ends as described in the Palmer book. remove the ** from the email. Thanks George

328. rudy4536@aol.com message: Need an old Harley sidecar interior 1940;s-50’s for a barn find bike, if you bought a new one…sell me the old, Thanks Rudy

327. Garnny6955@hotmail.com message: Iam wanting to build or buy 1966 FL FLH 1st yr Shovel Pan. Prefer original motor I do have some 66 parts,IF it is a basket case that is ok.I want this as my last personal ride.SO fellow riders if at all possible E-Mail me with some good news.

327. Garnny6955@hotmail.com message: Iam wanting to build or buy 1966 FL FLH 1st yr Shovel Pan. Prefer original motor I do have some 66 parts,IF it is a basket case that is ok.I want this as my last personal ride.SO fellow riders if at all possible E-Mail me with some good news.

326. aj49@sympatico.ca message: wanted 20,s ajs big port engine pieces rocker arms. pushrods .cam cover ,carb and any other pieces you might have for that bike

325. thelooseends***band@gmail.com message: 12-26-08 WANTED: Missouri motorcycle license plates from 1936-1950, especially 1946,1949, 1945....please call: 417-276-9908 if you have any of these! Remove the *** in the email address..Thanks!

324. thompsontrim@yahoo.com message: i looking for a motor for a 1972 z90 harley davidson-amf.Also any extra parts for it please let me know if anyone can help

323. bigyellowt@yahoo.com message: Wanted to Buy! 1915 Excelsior tool box,primary cover,rear chain guard,complete exhaust system(header pipes, muffler, and tail pipe).

322. albama cyc le warehouse@horsepowerintherawhide.net message: Hello sent an email to okiechief@earthlink.net I am intrested in the parts and have some fur trad'n to y'all if yunns want.
I need a bach weel plesure leyt mie now
Don Albertson
# 302-336-7405

321. anita.carty@sympatico.ca message: wanted 1928 indian chief parts email with anything you may have thanks

320. anita.carty@sympatico.ca message: wanted collectable motorcycle basketcases harley or indian or just parts 1917 harley parts and 1925 indian parts wanted

319. 77okchief@earthlink.net message: Wanted CA$H for JUNK EXCELSIOR CLEVELAND INDIAN 4 HENDERSON FOWLER,SUNDBEAM,JustinTime,Flanders,HD XA,841,741,641 misc. parts(someNOS$20.00min.bids=donations)mulitInternationalCollections! Mostly wallhanger or stocking stuffer kinda stuff for the Holidays! CA$H must be recieved in person by 12/22/08 while inBendigoOzlandToday~!Thanks George!

318. emer974@charter.net message: Looking for a set of 38-45 Indian hubs or complete wheels for four cylinder project.Thanks George

317. thelooseendsband@gmail.com*** message: 12-20-08 WANTED: a set of springer fork springs for a Harley single (Peashooter)..either original of repops..or information to a source for these springs....Thanks and Happy Holidays to all! 417-276-9908 (Gerald) (remove the ***)

316. thelooseendsband@gmail.com*** message: 12-20-08 WANTED: a set of springer fork springs for a Harley single (Peashooter)..either original of repops..or information to a source for these springs....Thanks and Happy Holidays to all! 417-276-9908 (Gerald)

315. campheidewald@web.de message: Looking to buy a old pre 1914 Excelsior flat belt single or twin,running or not or other unrestored bikes pre 1920.

314. bigyellowt@yahoo.com message: Wanted to trade my orig.Harley 1915 front end in good shape for 1912 HD front end in same cond. straight across

313. bigyellowt@yahoo.com message: Ready to sell ? need $$$ call 530 305-6979 I am looking to Buy unrestored Motorcycles like 1920's hillclimber,drag bikes,boardtrack racers,pre 1916 singles and twin motorcycles,all makes of 4 cy.er's,odd one off motorcycles,parts,accessories and memorbilia.

312. cleveland4junk@@@aol.com message: Looking for any cleveland four cylinder parts that might be out there.
gas tanks, motors, parts anything small or large.
thanks
please take the @@ to email

311. oilleak@yahoo.com message: Looking for a complete 37 or 39ULH motor and reverse trans for same.

310. mark000@000linkcycles.com message: I just listed a Harley JD Freewheel Clutch (used 1915 1916 1917 1918 and early 1919) and a 1918 Three Speed transmission on Ebay. Item numbers are 250344688165 and 250344699258 respectivly. Seller ID is MMASAHD. Remove the 000's from around the @ sign for my correct email address.
Thanks
Mark

309. bbop@dblclickit.com message: henderson kj 1930-31 fr.rear hubs complete or not . kj head lite brackets for deluxe brackets harleybosch 45degree mag for kj partsthank you

308. wr_racer@hotmail.com message: still in need of a matched set KNUCKLEHEAD CASES 46/47 needing repair or great shape parts or cash waiting to trade thanks

307. wr_racer@hotmail.com message: still in need of couple parts for a 36 el -------#1 a lid for the valve spring cup dented smashed repo. what ever is available #2 a 1936 washington state license plate parts or cash waiting to trade thanks

306. thelooseendsband@gmail.com message: 12-17-08 WANTED: Missouri or Arkansas motorcycle license plates from 1936 through 1950.....Call: 417-276-9908 or email: thelooseendsband@gmail.com Thanks!

305. campheidewald@web.de message: Looking to buy a old pre 1914 Excelsior flat belt single or twin,running or not or other unrestored bikes pre 1920.

304. gofarfast**@**gmail.com message: WANTED: Colorado motorcycle license plates up to 1969 in nice presentable condition. Send pictures and prices. Delete ** from email address to thwart spams and scams.

303. phil@knuckleworks.com message: Wanted R/H side cases for generator big twin motors 1936 to 1969. will trade or buy out right also need front section for knucklehead frame - 310 -537-7480- Phil

302. DPATCH2@KC.RR.COM message: ANY BODY HAVE A FRAME TABLE THEY WANT TO SELL CALL DAN 913 268 5314 913 515 3721

301. FAKEIT@BELLSOUTH.NET message: WANTED !! 1936 AND 1939 INDIAN 4 CYL. MOTOR ASSY. THANKS RICHARD

300. oilleak@yahoo.com message: Wanted 37-39 ULH motor,37-39 reverse trans

299. hogluvr1340@yahoo.com message: Wanted: Harley-Davidson 1940 W or WL flathead 45 engine cases, cash outright or will trade a nice set of 1947 WL cases. Thanks George!

298. qqkx3569@ace.ocn.ne.jp message: I need Linkert M35 Throttle Lever.One hole Knuckle Type.

297. softtail5@hotmail.com message: front fork springs for 15-19 excelsior, 19 pocket valve ass complete, intake and exaust nuts for 14 excelsior. thanks curtis

296. thelooseendsband@gmail.com message: WANTED: Knucklehead stuff..."black stuff", front and rear brake drms and backing plates, springer rockers, f&r axles, 16" rims. I have all this stuff in chrome, most of it very nice, but I'm not a chrome guy...would like to trade my chrome for you black!
Gerald AMCA 8193: 417-276-9908

295. qqkx3569@ace.ocn.ne.jp message: I need KR fly wheel parts, tappets, blocks and cams.

294. fastboyhd@bellsouth.net message: please help---i'm looking for an old friend---my 42 knuckle. it was not stolen. i broke my wrist and had to sell it at the time. last i knew it was in florida but who knows. it was red when i had it but i heard someone might have painted it green i. vin number is 42F1802. any help would be greatly appreciated. i turn 60 next july and my wife said if i can find it she would buy it back for me if she can afford it. thank you

293. southjerseyjack@gmail.com message: Very interested in finding a Harley Servi-Car,1950 to 60. Complete, roller, basket - Let me know ewhat you have. I am a private buyer.

292. papabearjkt@yahoo.com message: Merry Christmas Everyone! Thanks George!!!! May the Great Spirit Bless everyone with the parts they need and or Cycle(s) this Holiday Spirit of GoOD will to all my brothers and sisters! Protection while on the roads! Healings and Blessings to all of those in need!Halleluyah! Amen! Merry CHRISTmass to all and to ALL a GOOD KNIGHT!

291. pielle-electrik@libero.it message: I look for one set knucklehead heads.
thakns Lorenzo

290. biplane4ever@email.de message: Wanted: I will buy or swap for my 1928 Harley-D. BAF.
2409-28 foot clutch lever, 2410-14 hinged toe piece, 2411-14 hinged toe piece pin.
Thanks George!!

289. bigyellowt@yahoo.com message: Wanted to buy two good old useable orig. 520 narrow drive chain for 1907 Indian,need two pieces long enough to go from the pedal sprocket to rear hub and one from drive sprocket to rear hub. also a matching set of old rat trap pedals email or call 530 305-6979 if you have some.

288. fred@fjwillert.com message: wanted 1938 Harley-Davidson rear fender and tailight also original air cleaner for 1938 harley-Davidson 45

287. oldmotorbike @usa.com message: to Curtis or Henn are you his lover? stop we only want want adds and for sale junk! your post says to people that your bikes are repop. why do you not take a poll and ask the over 100s of people like myself and the guy who wrote in on Christain Henn how they have reciieved junk. Christain knows me I dealt with him 15years ago. post on complaints not here!
Thanks George Women!

286. kim6723@aol.com message: WANTED 1924/25 JD FUSE BOX COVER. HAVE EXTRA SWITCH COVER ( upper ) will trade for lower. Figure 8 style switch assm. Thank You Kim 513 407 2575....Thankx George !!!

285. softtail5@hotmail.com message: i need a complete pocket valve for a 15-19 excelsior, front fork springs for 15-19 excelsior, and intake and exaust nuts for a 14 excelsior. any help out there

well i keep doing business with christian, i have not had any problems with him and have spent alot of money, if you can get the parts at J& P cycles buy all means do so. but there anit to many people out there that make parts for these old bikes. curtis

284. kim6723@aol.com message: PRE 1915 GUYS-WANTED - Old spokes & small parts left over from restorations..( doing a 12 hd single) THANKS.....WANTED ORIGINAL PAINT bikes 1 to collections-/ Need original paint wheels for 35 vl & 35 accessories, this bike is a sweetheart (according to Rat)!! Wanted Broken J & jd cylinders to use as fin donors, broken frame parts- broken anything.....NEED 12 hd single oem front fender / Have much pre 15 to trade...WANTED hubcaps for 59 indian patrol car. Thanks to all & THANK YOU GEORGE !!!!!!!!

283. eglideic@localnet.com message: Wanted Knucklehead left engine case. Have several sets of Knuckle flywheels for possible sale or swap. eglideic@localnet.com

282. $$4cylchevs@xcelco.on.ca$$ message: wanted for 1940 indian military cheif 1 lower rear fender strut and 1 lower front fender strut, seat "T", used dash cover, used taillite, have list of smaller items

for 1914 excelsior single belt drive 2 large gas caps, troxel seat parts, eclipse clutch arm ( long ) have list of smaller parts needed

remove all $$ for email

thanks george

281. oldmotorbike @usa.com message: Stop with the crap and put want adds on! Christain is a thief and makes bad parts everyone knows get over it and see him at the meet not here online! gee whiz George delete this junk so we can get back to buisness.
I will respond to any emails delete the spaces.
THANKS GEORGE!!!

280. henn@geloman.de message: To message nr 278:Thanks Curtis for defending me.
To message nr 274:Lemerik@comcat.net,whoever you are,would you please stand up and tell me your real name so we can discuss your problem.You wrote,that I make Henderson parts which don`t fit and you wrote that you ordered parts and you did`t get them?Can you explain?How do you know they don`t fit if you did`nt get them?
I have never cheated anybody and will never do.
Christian

279. mcmanumj@mailbox.sc.edu message: ***WANTED*** Parts for 1941 EL Police.
Need dual headlight bracket, Radio boxes, radio rack, speaker, and siren pedal. Please contact me if you have any of these parts. Also would like to have 1936,1939,1943,1944,and 1945 knuckleheads for collection complete motorcycles, basket cases, or engines only. Let me know what you have. Thanks, Matt 803-287-8575 or mcmanumj@mailbox.sc.edu

278. softtail5@hotmail.com message: in responce to ad 274, i have done alot of business with christian and have never had a problem, he makes the parts and it takes awhile to get them, all the parts the i have gotton for my excelsiors have worked without a problem. so to this guy that is slamming christian, you need to try working with people, and not expect your parts in a week, the workman ship is good, and if you can get your parts else were than do. but insted of being childish get a life. curtis

277. bigyellowt@yahoo.com message: Looking to buy a old pre 1916 barn find motorcycle single or twin,running or not. email photo and price or call 530 305 6979

276. morten38@online.no message: Just missing one part for my indian 741. Anyone who have a speedometer to fit my bike? Morten from Norway . Thanks George
morten38@online.no

275. popsflat@charter.net message: I am in need of a few horn button covers #4768-26 and in dire need of the little clip that holds the horn button guts in place #2777-26

I'll take quite a few of either and will pay a real fair price or trade some good old HD parts

no repop crap will be acceptable

thanx george you the man

Mike Carter out in the sunshine state of Ca

274. lemerik@comcast.net message: henn@geloman.de message: Anyone has a 1915-1919 Henderson motor for sale?Need one for a 82 year old friend of mine.Your price paid-no hassle.Thanks,Christian
THIS GUY IS A LIAR! MAKES FAKE HENDERSON PARTS THAT DO NOT FIT HE IS IN GERMANY AND WILL DO TRADES AND NOT SEND YOUR PARTS BEWARE HE IS A THIEF LIKE TIMMERMAN!

273. DPATCH2@KC.RR.COM message: 1941-1946 HARLEY KNUCKLEHEAD FLATHEAD FRAME . ALL CAST #'S ARE THERE NECK AND SIDE CAR LOOPS NEVER CUT . SEAT POST NOT BASHED IN . MOTOR MOUNT AND SEAT POST HAVE NOT BEEN REPAIRED .TOOL BOX AND REAR TANK MOUNT HAVE BEEN CUT NEED WELDED BACK. ONE BOTTOM TUBE FLATENED AND THE OTHER IS NOT THAT BAD . DOWNTUBES AND BACKBONE TWEAKED . EMAIL ME FOR PICTURES . $3000.00 FIRM. NEED A RIGHT TANK FOR A 1955 1956 PANHEAD .DAN 913 268 5314 913 515 3721 DPATCH2@KC.RR.COM

272. henn@geloman.de message: Anyone has a 1915-1919 Henderson motor for sale?Need one for a 82 year old friend of mine.Your price paid-no hassle.Thanks,Christian

271. gpeeper3584@charter.net message: Looking for a good set of 1938 or 1939 Knuck gas tanks. The more complete the better. Contact with condition and price.

270. sbrow@shaw.ca message: wanted--left case bearing race # 2518-41 ( old # 37474-41) for 1942 harley 3 spd trans. thanks, stu brown.

269. ga.vandal@yahoo.com message: I am also looking for S&S L carbs or parts.

268. ga.vandal@yahoo.com message: I am looking for a Knucklehead engine. Let me know what you have.

267. thelooseendsband@gmail.com message: 12-04-08 WANTED: Close-ratio transmission gearset for Harley WR, or complete transmission, and any other WR parts. Also Knucklehead motor (genuine HD only, no aftermarket Knuckle copies) Thanks! Call: 417-276-9908 or email: thelooseendsband@gmail.com*** (remove the ***)

266. bigyellowt@yahoo.com message: Wanted 1947 Cal. Motorcycle lic. plate with 1948 corner tag, have nice 1937 Ca. lic.plate to trade. email for photo

265. pineco@newsguy.com message: Looking for vl-rl headlight mount . thanks G

264. panheads@svtv.com message: looking for parts for my 34 vl,need front fender brace,need original battery box,original headlight motolamp,rear fork section,correct frame for mid to late year production.please email me at panheads@svtv.com

263. rudy4536@aol.com message: need harley 1947 date code trans case,

262. jpatrick@mountaincable.net message: I am restoring a 1917 Model O indian and I need some help finding lower front forks. They are the same style as camelback forks but they are wider by about 1/2". I also require front and rear hubs with 36 spoke holes. A frame for a saddle, it mounts to the frame above the gas tank and bolts into the rear frame. Any help would be greatly appreciated. I also could use a kicker. Thanks George.

Greg

261. duda@rduda.com message: Early hand brake lever for a Teens HD. The rear double acting brake band was operated by a hand lever. I am looking for the laver and brackets for the cable. I have pictures if you think you have one. Richard 802-888-7689

260. wr_racer@hotmail.com message: I have a short Christmas list need for my project
(1)copper tagged 32 E genarator

(2)valve spring cup lid 36/37 el or baby food jar lid same thing any condition

(3)Washington state license plate 1936 any condition

thanks

259. danjfitz@comcast.net message: 1937, 1938 or 1939 Chief wanted. I'm looking for a good original to restore. Would be interested in a good Sport Scout of this vintage as well. I have the funds available & just want to get an honest bike at an honest price. E-mail me at danjfitz@comcast.net if you can help...thanks!

258. bodnarjw***@hotmail.com message: Wanted Right Side engine case for 1946 knucklehead. Needs 35 or 36 date code on belly. I'm readyt o get moving on my project and I NEED this case to get going. Remove the *** for my email address. Thanks, Jim

257. jalvarez0921@sbcglobal.net message: I need an original front leg guards for a 1953 FL Harley Davidson.

256. duggy@cybernex.net message: cushman model 59 package kar 8 hp engine and trans w reverse

255. thelooseendsband@gmail.com*** message: 11-28-08 WANTED: Any Harley WR and Knucklehead parts or projects, parts piles, incomplete projects, what have you.....please call: 417-276-9908 or email, (remove the ***) Thanks George!!

254. life35t@netscape.com message: I need a left side or set of handal grips for a1967 h-d Sprint it only has 1300 mils on it so I would realy like to find one or set thanks.Tracy 350k

253. bigyellowt@yahoo.com message: Wanted 1915 X twin toolbox,primary cover and chain guard ,header pipes orig. or repop also 1907 Indian orig.head stock badge.please email photo and price

252. bigyellowt@yahoo.com message: Looking to buy! Wild looking alum.body or steal body mostly home built,1930's streamlined bodied art deco type motorcycles,any make of running gear is fine,can be built in the U.S.or anywere in the world. please email photos or call 530 305 6979

251. bigyellowt@yahoo.com message: Cash today! for single or dual eng. Knuckle drag bike and other old interesting drag bikes also Wanted barn fresh board tracker any make 1908 to 1920's please email photos and price or call 530 305 6979

250. bbop@dblclickit.com message: need kj 1930-31 rear hub/fr. hub complete or some parts

249. ehjacobson@earthlink.net message: shot gun exhaust pipes for 68 electra glide that fit inbetween the frame

248. j_g_haprov@hotmail.com message: WANTED:
VARD front end(s). Complete, parts, broken, rusted, whatever. Any condition in other words. Also looking for early(pre-1955) aftermarket parts such as harley footshift units(all brands), lee clutch pedals, riser setups, bars etc early modified parts/tanks-any condition

Thank you,
Jon

contact me please at j_g_haprov@hotmail.com
all parts to be used for personal projects

247. DUNK@IRONBLOCK.COM message: LOOKING FOR THE BOOK "Hendersons, those elegant machines: The complete history of Henderson motorcycles, 1911-1931 - SHULTZ

NEW OR USED, SEND EMAIL TO DUNK@IRONBLOCK.COM

246. ***bodnarjw***@hotmail.com message: Looking for a 1941-1948 Harley Davidson EL/FL (Knucklehead) Oil Pump case. I'm looking for one that doesn't need repair. I have a broken one already. Send me your offers please. Reach me at the email above. Remove the *** from both sides of the email address to get in touch with me. Thanks, Jim You can call me at (321) 298-8342.

245. ***bodnarjw***@hotmail.com message: I am looking for a 1939 big twin frame and springer forks. remove the *** from the email to get in touch with me. Thanks, Jim

244. lutazca@libero.it message: Dear Friends , good morning.
My name is Luca Bodigoi from Italy.
I search a Corbin police speedometer for my Harley Davidson V 1930 police.

Please help me

thanks

Luca

243. indian52@maine.rr.com message: I'm looking for speed parts-cam, intake, headers,etc for a 1938-1942 Indian 4 cyl engine. Someone must have made this stuff
Thanks
Paul

242. bigyellowt@yahoo.com message: Looking to buy Flying Merkel or other pre 16 motorcycles and parts.email photo and price or call 530 305 6979

241. beachhawg@comcast.net message: 74 front cyl. no more than .030 over. for 1948. will buy set if i have to . need to complete project. thanks rick
NO REPRODUCTION

240. beachhawg@comcast.net message: 74 front cyl. no more than .030 over. for 1948. will buy set if i have to . need to complete project. thanks rick

239. (( 33vle@optonline.net )) message: Please remove (( )) in email in
ad # 238...
Thanks

238. (( 33vle@optonline.net )) message: BOSCH ZEV MAG
for Harley
Will buy one...or more...
Thanks,
Bill

237. wr_cacer@hotmail.com message: still WANTED a COPPER tagged 32 e generator complete or just the body
for my project any help would be great money to trade or parts thanks

236. wr_cacer@hotmail.com message: still WANTED a 1936/37 valve spring cover(baby food jar top) for my project any help would be great money to trade or parts thanks

235. wr_cacer@hotmail.com message: still WANTED a 1936 Washington state license plate for my project any help would be great money to trade thanks

234. me@joestuff.com message: WTB, velocity stack, choke, and stack cover for S+S "G" side bowl carb. Help me get my period mod hot rod sportster on the road in style.

Also, looking for horn(almost like the springer wing horn, but with a more abstract design, 4 laminate bracket.) goodyear grasshoppers(19x3.25, 18x4), duel seat (not buddy), and original sand cast cam and sprocket covers for my 62 XLCH resto.
me@joestuff.com

233. pigstye13@aol.com message: Wanted::::: looking for NOS 61" front knuclehead cylinder 5 fin. Cash or parts.Thanks

232. v-twin@mail.dk message: Wanted new home for this beauty.
Harley-davidson JDH 1929
See pictures

Harley-Davidson JDH 1929

231. jstewart@ajc.org.au message: I am looking and want to purchase an original service manual and original spare parts catalogue for a 1946 WL Harley Davidson, recently purchased from Portugal and shipped to me here in Australia. Thanks.

230. sharonsandwell$$$@hotmail.com message: SERVI-CAR looking for rear Right Hand fender, chain guards, bumper supports...... let me know what you want to sell, I may still need it! remove the $$$ from the email address.
Thanks for checking your parts stash!

229. indianchoutracer@yahoo.se message: Parts for Excelsior 61' 1915. Transmission case or whole tranny and clutch parts. Have some parts for trade.

228. kim6723@aol.com message: WANTED--Clincher Tires for pre 1913 DOUBLE CLINCHER RIMS!!! Has anyone figured this one out ?? PLEASE HELP Thank you Kim 513 407 2575

227. garcia_r@msn.com message: WANTED: OEM 1936-1939 HARLEY-DAVIDSON KNUCKLEHEAD RIGHT SIDE GAS TANK.330-360-5586 RAY... HAVE ORIGINAL RESTORED COMPLETE 1942-1946 BOAT TAIL TAILLIGHT ASSEMBLY FOR PARTIAL TRADE OR WHATCHA NEED?

226. jana3076@yahoo.com message: Looking for 1913 Excelsior Autocycle model 4 C parts.
Front fender
front leaf spring pack
Gas & oil filler caps
Cylinder for single model
Exhaust pipe for single model
E-mail or call. Marty, (714)241-7307

225. GA.VADNAL@YAHOO.COM message: i am looking for s&s L series carbs any condition please let me know what you have.

224. oldmtrcyc$$$$@msn.com message: Wanted: Pre-1916 motorcycles, parts, or projects. I am not a broker. Flying merkel, Pierce, Harley-Davidson, etc. Remove the $$$$ in email. 360-600-6388

223. vvmc_usa@yahoo.com message: needed a set of matched cases 1947/1946 knucklehead needing repair or not thanks

222. wr_racer@hotmail.com message: Still want and needed a COPPER tag 32 E generator for a project original,restored or what ever money or H.D. parts to trade thanks

221. wr_racer@hotmail.com message: Still want and needed a 1936/37 valve spring cup for a project original,restored or what ever money or H.D. parts to trade thanks

220. wr_racer@hotmail.com message: Still needed a 1936 Washington state license plate for a project original,restored or what ever money or H.D. parts to trade

219. thelooseendsband@gmail.com message: 11-14-08 WANTED: 1941-46 civilian (black face) OEM Harley speedometer in original condition. I don't want a new-looking speedo....this is going on my unrestored '46 Knuckle. I have alot of stuff to trade, depending on what you are looking for, or will buy outright if the price is right. Thanks! 417-276-9908 or thelooseendsband@gmail.com

218. thelooseendsband@gmail.com message: 1-24-08 WANTED: 1941-46 civilian (black face) OEM Harley speedometer in original condition. I don't want a new-looking speedo....this is going on my unrestored '46 Knuckle. I have alot of stuff to trade, depending on what you are looking for, or will buy outright if the price is right. Thanks! 417-276-9908 or thelooseendsband@gmail.com

217. kim6723@aol.com message: WANTED :Pre 1915 guys please help!! I am finishing my 1912 hd single ,original paint oem only, parts bike. The last piece I need is the BELT TENSIONER LEVER...Have much to trade,- pre 15 parts-restoration services, engine-cylinder rebuilding, fin repair, etc PLEASE HELP ... Thank You Kim

216. pigstye13@aol.com message: Wanted: need a good used OEM star hub. prefer to trade but will buy outright. I have a ton of NOS & good used OEM parts for just about any model from 1940 to 1962. Just email me a list of parts you are looking for and I will email ya back very quickly...Thanks
Mutt

215. provoli@otenet.gr message: Hello,
I'm interested for Smiths cronometric speedo 80 mph

214. jarmo.mursula@netikka.fi message: I am looking 1930 Matchless V/3 or V/6 engine. I am intresting 1929 V/5 or V/2 engine and V/5 cylinder too.

213. mcmanumj@mailbox.sc.edu message: ***WANTED*** parts for a 47 knucklehead project. I need an offset springer, handlebars, gas tanks, and heads. let me know what you have. Thanks, Matt 803-287-8575

212. bpalbee@yahoo.com message: Wanted: 1934 chief forks. Nice complete 1941-45 chief forks for sale $2700 or trade for 1934 forks. Also wanted 1934 chief fenders, dash, gas tanks, footboards, and steering damper. Brian 425-698-8172

211. laughingindian@msn.com message: I need 1 45" open-type Indian Scout flywheel. It can be a pinion-side or a drive-side. Thanks

210. stefan@ecn.net.au message: indian o model 1917 frame & wheels back & front wanted

209. DPATCH2@KC.RR.COM message: NEED SET OF 1955 1956 PANHEAD TANKS DENTS OK NO RUST DAN 913 268 5314 ALSO NEED EMBLEM MOUNTS FOR 51-53 TANKS MUST BE ORIGINALS

208. wr_racer@hotmail.com message: WANTED I need a 1936 /37 valve spring cup lid any help thanks

207. wr_racer@hotmail.com message: WANTED I need a copper tagged 32 E genarator any help even just the body thanks

206. vvmc_usa@yahoo.com message: WANTED I need a Washington state 1936 license plate perpect or restored original well used any help thanks

205. KARL50HENRY@ncrrcom. message: I AM RESTORING 1934 CHEIF NEED COMPLETE FRONTEND WHITH WHEEL AND FENDER ALSO RESTORABLE TANKS DASH MUSTBE REASONABLE PRICED SEMI RETIRED AND ON A TIGHT BUDGET ANY HELP $$$$$$ will be appreciated 910 426 9915 NC

204. softtail5@hotmail.com message: i eend a fron head for a 36 indian JR scout, and a front end could use a socut front forks for it. also some handle bars. i have a nice set of 25 chief cases, with flywheels and rods, came cover, and lifters, still has green paint on it. be willing to trade for the above parts or sale for 1500.00. thanks curtis

203. ##fatdog1903@yahoo.com message: Harley-Davidson 1922 Cylinder and 1915 camcover listed in ad 193 on eBay now! see auctions 250322095553 and 250322101517 Thanks FatDog!

202. hickswd@bellsouth.net message: Looking for Left side Knucklehead engine case, '42 thru '46 or set of cases. Must have original, unaltered VIN.

201. steidclan@hotmail.com message: Restoring '49 FL. Need original sand-cast lower legs. Mike Thanks George

200. chief348@juno.com message: WANTED-11-07-08 Need Knuckle Dash and Tailamp Covers for a 40EL. The Dash Cover should have the V and the Tailamp Cover should be the one with the clips for the Lenses and no screw holes. I'll even take old school ratty chrome. I still have the spare set of 40-46 Knuckle Tanks to trade and found a set of NOS Trim and Emblem Mounts for them and will be included. THANKS GEORGE!

199. wr_cacer@hotmail.com message: need all exaust except for the muffler for my 1936 el knucklehead original or repop cash or parts to trade thanks

198. wr_cacer@hotmail.com message: still looking for (1)one lid for a baby food jar 36/37 valve spring cups that and a 32E copper tag genarator for my project any help would be great dented smashed or perfect on the lid and complete or just the body on genarator have knuck parts or money to trade

197. arth.mac@verizon.net message: In need of a front fender to fit a 1924 jdca. Also need a pair of gas tanks for a 1917 Powerplus with some original paint. I have a good pair to exchange if needed. Thanks ART on Cape Cod

196. indianchoutracer@yahoo.se message: wanted M-51 carburettor.

195. montana-indian@hotmail.com message: Wanted 1946-1947 Indian Chief engine cases must be nice prefer NOT bead blasted.406-434-2005

194. chief348@juno.com message: WANTED; 11-5-08 Need a pair of barn fresh 18 Inch Star Hub Wheels and a complete front brake assy for a 40EL. Need not be stepped hubs. Have an extra pair of restorable 40-46 Style Knuckle Gas Tanks that are missing the emblem mounts to trade.

193. fatdog1903@yahoo.com message: For Trade NEAR NOS HD parts... Cherry 1922 only rear JD (74") cylinder with tons of original nickel and only +.002 on the bore. Also 1915 ONLY! twin Cam Cover with all oil pump internals. Need to trade for 1914 single short coupled racer parts. Email for my want list and photos of parts. Thanks FatDog. www.fatdogvintagesalvage.com

192. Steve45hd@yahoo.com message: Looking for restored WLA send what you have to email address. Thanks for looking

191. mcmanumj@mailbox.sc.edu message: I need a red cycle ray headlight lense for 41 knucklehead police bike, and the bracket or a picture of the bracket to mount dual headlights. thanks - Matt 803-287-8575 or mcmanumj@mailbox.sc.edu

190. claytonrestall@hotmail.com message: Wanted. ULH 13 fin barrels, heads, and carb (M-52L). Also need beehive tail light, footboards, oil tank, and speedo for 39 BT Harley. Have 37 only oil tank with all fittings, and 39U cases with title, cam cover, barrels, pistons, heads, and carb for sale / trade.

189. claytonrestall@hotmail.com message: Wanted. ULH 13 fin barrels, heads, and carb (M-52L). Also need beehive tail light, footboards, oil tank, and speedo for 39 BT Harley. Have 37 only oil tank with all fittings, and 39U cases with title, cam cover, barrels, pistons, heads, and carb for sale / trade.

188. claytonrestall@hotmail.com message: Wanted. ULH 13 fin barrels, heads, and carb (M-52L). Also need beehive tail light, footboards, oil tank, and speedo for 39 BT Harley. Have 37 only oil tank with all fittings, and 39U cases with title, cam cover, barrels, pistons, heads, and carb for sale / trade.

187. bpk@valley.net message: Wanted-Harley front fender tip, 1958, plastic, prefer used/abused-and neglected- doesn't need to be pretty-603-298-5799,bpk@@valley.net

186. thelooseendsband@***gmail.com message: WANTED: Knucklehead parts, engine stuff, and rear brake drum and plate (black)(have chrome stuff) to trade..also, have Panhead stuff to trade or will buy: Have 1948-49 Panhead front head, 1964-5 front head, .030 over cyl, .040 over cyl, complete set of rockers and boxes, and set of D rings....will sell or trade! Call: 417-276-9908
take out the *** in the email address..thanks George!

185. softtail5@hotmail.com message: looking for front end for a 1934 indian scout. also front head and other misc parts. need frame for 15-19 excelsior. thans curtis

184. garcia_r@msn.com message: WANTED: TOP OUTLOOK LENSE FOR HARLEY BOATAIL TAILLIGHT 1939-1946. NOS PREFERED BUT GOOD OEM WILL DO. NEED ASAP. THANKS! 330-360-5586

183. valron@atlanticbb.net message: WANTED:I'M LOOKIN' FOR A COMPLETE SET OF 4 UPPER VALVE SPRING COVERS (TINS) FOR A '46 FL KNUCKLE. ORIGINAL HARLEY STUFF, PARKERIZED NOT CHROME. I HAVE A NICE SET OF ORIGINAL HARLEY ONES WITH NICE OLD CHROME. MAYBE SOME SORT OF TRADE OR CASH? LET ME KNOW. THANKS, RON.

182. busterbrown69@hotmail.com message: im looking for a original complete reardrumbrake for a 1953 rigid frame

181. busterbrown69@hotmail.com message: im looking for a original complete reardrumbrake for a 1953 rigid frame

180. alexgrah1@hotmail.com message: I'm after a couple of frame clamps for my 25 Indian Scout. I'd like a frame clamp for the right angle Corbin drive mount, and a clamp for the Splitdorf generator holder. I just need the smaller part that the bolts go through, not the main part that holds the right angle drive or the generator. Craig. Australia.

179. fastboyhd@bellsouth.net message: looking for NOS front 74 knuclehead cylinder 5 fin. might be interested in nice front with no broken fins to sleeve. must be 74 with the thick gasket surface not a 61 with the fire ring cut off----thank you george

178. durocar@aol.com message: want front fender for 1914 excelsior.old or repro will work. I will buy or trade for my 1912 excelsior front fender.

177. info@trinitymotorworks.com message: Wanted:
Original Paint Indian motorcycles for private collection. Immediately looking for Camelback, 29-31 Indian Four and OHV 1920s race bikes, motors and parts. Also looking for parts loads to finish ongoing projects.
570-460-8123
Thanks George

176. duda@rduda.com message: 1936 Servi, and 34 RL. I need a primary cover for servi and a generator gear for the RL, 632-32. I need a good shifter gate for the servi with reverse. Can anyone send a photo showing me the difference between a 36-41 primary cover and the 41 and up cover. Anyone have a good servi box and fenders for the 36 servi? Thanks george.

175. hitzeleric@netscape.net message: Looking for any and all parts for a 39 knucklehead. Frame, tranny, tanks, etc. I pay cash or have knuckle parts for trade. Email or call 716 725 5289. Thanks.

174. danmargolien***@yahoo.com message: JD parts wanted

in particular need a good or better distributor/timer drive gear- this is on the timer shaft itself. Also, the mating worm gear would be nice.

Need the 2 control rods that connect the timer and the carburator to the control wire. For the HX carb.

THX!

173. (33vle@optonline.net) message: WANTED
Bosch ZEV mag for twin Harley
ANY ORIGINAL PAINT PARTS FOR 1915 AND EARLIER HARLEY
Looking for spare 1915 HD motor...cylinders, bottom, whatever

Thanks...Bill
845-424-3454
remove () from email
"DON'T LET RUST, TURN TO DUST"


172. Repomaninc@aol.com message: Looking for a nice K series bike
Thanx

171. bigyellowt@yahoo.com message: Looking to buy pre 1916 motorcycles, running or not,odd brands are good, will be at the Peterson Museum for the Steve Mc Queen auction in Los Angeles Ca. Oct. 24th and 25th. please call Vince at 530 305-6979

170. FRANTIC.CITY@GMAIL.COM message: ENVELOPES,ENVELOPES,HERE, GET YOUR ENVELOPES HERE, DONT WANT DONUTS,GET AN ENVELOPE,BETTER FOR YOUR WAISTLINE,HUH......SO NOW, LETS START DIGGIN FOR MORE OF THAT EASY TO FIND POLICE STUFF, YUP, JUST REALIZED, THE COPS DONT HAVE THIS STUFF ANYMORE, THEY CANT AFFORD IT. BRING IT OUT AND LETS TRADE FOR STUFFED ENVELOPES, STOCK MARKET CRASH ONLY HELPED THE ANTIQUE MARKET, FOR THOSE WHO HAVE INVESTED IN THEMSELVES AND NOT WHAT THE FIANANCIAL GURUS THOUGHT WOULD BE THE ANSWER, HOW 'BOUT THAT, HAVE A GREAT DAY AND GEORGES IS STILL #1

169. wr_racer@hotmail.com message: looking for a Harley model 32e 3 brush generator that has a copper id tag also need a top lid for a 37/37 baby food jar dented smashed any help would be greatcash or trade thanks

168. 77okchief D@earthlink.net message: WANTED! A few parts to finish bike project or i will sell or trade. Here is the parts i have to work with so far so whatever IS NOT on THIS LIST is what I NEED! INDIAN '48 Chief parts i have are: Speedo with cable and front drive unit,dash w/original Red Generator light,toolbox, Stock frame w/shocks, forks, tanks, motor/trans (some NEW bearing,races,shafts,etc.) almost complete w/rebuilt INDIAN M-6 Linkert,Indian script air cleaner, wheels, front and rear brakes with axles/spacers,etc.,Front FENDER is(fiberglass - old STARKLITE), Flanders Handlebars with Twist grips and guts, NOS high low beam SWITCH and HORN BUTTON , do have Generator with mount and GUARD!, footboards, kickstand and center stand, battery tray, brake and clutch linkage,rear FOOT brake pedal,clevis(3), Headlight(sealed Beam),tail light complete, etc. I have enough for almost a 100% bike here plus MORE extra goodies to trade for those PARTS I DONT HAVE YET!. So let me know what you got to help finish a Stock 48 CHIEF. If i cant find what i need i may have to Sell or trade off project soon. If i do then some can Finish a bike or use as inventory to fix other bikes! Will send Pictures on request with return contact ph# to confirm ONLY and i will do the same, serious only please. delete the D from email. THANKS GEORGE!

167. bll.fowler@gmail.com message: Wanted: '32 thru '34 Indian 4 cylinder parts. I'm restoring a '33 and am in need of plenty. Please respond by e-mail with what you have and what you want for it.

166. softtail5@hotmail.com message: i need a front end for a 15-19 excelsior or some help. i have a front end but it needs repaired and i need another one made can any one out there help out. i need these front ends to get my bikes up and running.

165. union.jack@wxs.nl message: Hi,
I am looking for a pair of cylinders and / or heads for my 41WLD. Offer me anything.
Martin

164. tbarlett@embarqmail.com message: Need Left 1947-48 UL Harley left gas tank.Also need 1950 Harley Big Twin frame,I have early 1949 Frame to trade.Thanks Tom

163. goglidego@yahoo.co.jp message: wanted 57 panhead uncut frame

162. goglidego@yahoo.co.jp message: wanted 41 knucklehead uncut frame

161. proto60pan@mchsi.com message: WANTED: used GOODYEAR 500-16 SUPER EAGLE 100 tire. Must be wide whitewall style. Whitewall measures at least 1-3/4 inches wide. I don't ride this bike, but would still like OK tread. Weather checking is acceptable. Email or call Brad at (563)320-2014 Thank you

160. indianchoutracer@yahoo.se message: Transmission, clutch and rear brake parts for 1915 Excelsior. Have parts for trade or cash. Also for 1919 Harley J-model: rear brake pedal and right sidebar, rear brake and drum.
Complete linkage for gearchange from transmission including gear change lever.

159. indianchoutracer@yahoo.se message: Knucklehead basket case any year wanted.

158. sasobb@gmail.com message: Wanted Case for Panhead 1951-1952 (top conditions) or complete motor.

157. jbingham@hawaii.edu message: FOR SALE: 1922 Indian Scout - complete, matching numbers, older body restoration, but engine and gearbox has been completely overhauled, as new and done professionally (costly) - video and pictures of restoration + history + parts goes with bike.
Pictures of bike on request - open to fair market offers
Bike comes from Australia.

156. jana3076@yahoo.com message: Looking for 1912-1914 Excelsior Autocycle parts;
Front fender and leaf spring.
Frame mount tool box.
Cylinder for a single model.
Exhaust for a single model.
Troxel leather seat.
Gas and oil tank filler caps.
Long style coke bottle handle grips.
If anyone has any of these parts for sale please let me know.
Marty at 1-(714) 241-7307

155. ##hd36ohv@yahoo.com message: I have an intake manifold for a Wagner single - probably pre-teen to trade for HD knucklehead or flathea parts or $150 cash + shipping.

Remove ## to email.

Jerry

154. cmantiques@mac.com message: WANTED HENDERSON FOUR ENGINE AND TRANSMISSION.
ALSO SAME FOR ACE MOTORCYCLE.
Any link or tip appreciated!

153. ((hd65flh@comcast.net)) message: Looking for 48-50 oil pump body for my 49EL. Will take whole assembly if necessary. To reply remove (( )).

152. 77okchiefD@earthlink.net message: WANTED! Anyone know if LANE PLOTNER is still alive?(Not sure if thats spelled correctly,heard he lived in So.Cal area? Maybe San Diego area?). Cant find his ph # or address to write. My father knew him many years ago and i need a good MAGNETO person for information and possible repair/rebuild on a few Magnetos! Also anyone in the OKLAHOMA Indian Territories AREA (neighboring States also) thats into the OLD M/Cs please drop me a line! (I travel back and forth to Southern California occasionally) Anywhere in between, So if you know of someone please relay information so 2 M/C hobbists can get together please. THANK YOU FOR YOUR TIME! Many Thanks to George also of course! delete the D in return email here to thwart the SPAMinators!

151. papabearjkt@yahoo.com message: WANTED: INDIAN 46-47-48 Parts listed BELOW, have extra PARTS for TRADE if needed. Send list if TRADE of PARTS NEEDED and i will do the same. Please include contact Information also to confirm that you are not a Spambot or someone playing games. SOME HD PARTS AVAILABLE FOR TRADE ALSO or OTHER BRANDS and DIFFERENT YEARS(OLD TO NEW) OF AMERICAN MOTO and MOTOR CYCLES! Thanks GEORGE!

150. papabearjkt@yahoo.com message: WANTED: INDIAN 46-47-48 Girder Fork NECK BOTTOM TEE STEM w/or without washer/bearings/Nuts/key. Straight or bent is ok, will consider either depending on trade or Ca$H wanted. Also Triple Tree RISERS(set of both,a matched pair)w/ or without top caps. Stock good used HANDLEBARS or nice reproduction STRAIGHT w/or without Chrome. Inner PRIMARY. SOLO SEAT,Seat TEE and SEAT POST. HEADLIGHT MOUNT. REAR MIDDLE BRAKE CLEVIS PIVOT for rear brake rods attach in middle of bike right side.

149. partyb1@gmail.com message: I want a 1942 Wla-please call 253-232-7824 if you have one.
Thanks Marty

148. donandgerry@bignet.net message: Looking for a 1942 WLC tail light and bracket

147. ase55flh@hotmail.com message: WANTED : My friend (serious collector) Looking for a 1941.42.46 Original Blue paint Harley Davidson Knucklehead.
First one I need minimum 5 pictures.
No junk please!

146. wr_racer@hotmail.com message: any help out there i still need a OEM valve cover spring lid part num. 175-36 so i can finish my engine thanks

145. fgary@adelphia.net message: WANTED TO TRADE!! I HAVE A NICE COMPLETE 1921 CLEVELAND LIGHTWEIGHT TO TRADE FOR A HARLEY J OR JD OR AN INDIAN MODEL K OR O OR SCOUT PROJECT .WHAT HAVE YOU TO OFFER??? E-MAIL OR CALL:GARY AT 440-639-0858 CONCORD ,OHIO GEORGE,THANKS A MILLION!!!

144. tenec01@aol.com message: WANTED: 1956 KHK FUEL TANK ,STOCK HEADER PIPE,

143. lj2615@hotmail.com message: looking for a 1947 California motorcycle plate in good condition.

142. bigyellowt@yahoo.com message: Looking to buy a old barn fresh broadtracker or parts like chassic or motors,any year any brand. call 530 305 6979 or email photos to bigyellowt@yahoo.com

141. Blakshov@yahoo.com message: Need a complete knucklehead engine. El or Fl matching cases and heads. Also would like to find a frame and springer. Cash paid for good parts

140. dinofell@aol.com message: 78 shovel wide front end

139. softtail5@hotmail.com message: i need a oil pump for a 15-19 excelsior, possible tranny, and any other parts you may have. also need intake nuts and coalers for a 14 excelsior. any help out there. curtis

138. hitzeleric@netscape.net message: Looking for a rear 4 fin cylinder for a 39 knuckle. I have a extra front 4 fin(in need of a sleeve) that I'm willing to trade (not sell). Thanks George!

137. hogluvr1340@yahoo.com message: Wanted: 1940 Harley WL flathead 45" cases or complete motor w/good VIN numbers. Thanks George!

136. yanik@omni.gor.net message: Just an observation. I think alot of you out there are wimps putting peoples names up and such I just want to buy bikes not listen to or read junk mail the last one about Hazelton I met him about fifteen years ago was a ego maniac that his wife left him he owns an airline in Australia he is a jerk but always sent my junk. but why do we need george to print this crap up? I have georges home address as well as phone number from a simple search on the web for: Dr. George Pardos Denver Colorado I guess I should post it?
just one person wanting to get rid of junk mail

135. frantic.city@gmail.com message: THATS RIGHT, I'M A PIG,SO WHERE ARE THE COP PARTS??? NEED MORE,FOR SURE THEY HAVENT ALL BEEN SCRAPED, CAUSE IF THEY HAVE, THEIR TOOOO CHEAP FOR WHATS OUT THERE, SOUNDS LIKE $2500 NOW FOR THOSE NOS BATTERIES,HUH!!! REMEMBER,PIGS GET FAT AND HOGS GO TO SLAUGHTER.....SO KEEP ON DIGGIN THEM OUT,AND OH YEA, NO LATE MODEL COOKIECUTTER TWIN-CAM SWILL, GEORGE YOURE THE BEST

134. vvmc_usa@yahoo.com message: looking for a harley davidson 1939 deluxe solo seat any condition thanks

133. pineco@newsguy.com message: Wanted 1957 and 1941 maryland motor cycle tags. Thanks G.

132. bhamster@comcast.net message: 1936 INDIAN Chief WANTED. Complete or parts. Resored, original or basket case. anything 1936 Indian Chief. Thank you 360-815-4426 or 360-752-2730 (Bellingham Washington, state).

131. bigyellowt@yahoo.com message: Wanted old Drag bike, like Knucklehead twin eng. or ??? something cool, I have a old single eng. Knuckle drag bike now and want more.will pay cash or have old motorcycles to trade.call 530 305 6979 email photo and price to bigyellowt@yahoo.com

130. cralllen@aol.com message: Wanted older motorcycle license plates.
I have mc. plates from 1912 and up for trade, send me your want list and the ones you have to trade,thanks Charles from Charlotte NC

129. sthellusson@gmail.com message: anything for Ace 4s,dui splitdorf generator,simms or berling mag,ace messinger saddle,cylinders any top end parts intake or exhaust manifold,schebler hx183,what have you

128. theknucklehead@hotmail.com message: WANTED: 1940-1943 HARLEY STAR HUBS. THESE HAVE THE "SPLIT" IN THE CENTER PORTION OF THE HUB AND FLAT AREA FOR THE ZERK FITTING. I NEED A PAIR OF THESE. NO JUNK PLEASE!!

127. thelooseends***band@gmail.com message: Needed: an old, rusted, crushed, unuseable 45 gas tank, or Pan/Knuckle tank as a donor tank for the fuel reserve shutoff fitting in the top of the tank (threaded nub) Help is appreciated!!! Remove the *** from the email address, or call: 417-276-9908 (Gerald)

126. tbarlett@embarqmail.com message: Still need a Harley mid 46-47 Bull neck frame and a 46 Harley big twin frame.Also need left 47-48 UL 74" flathead gas tank.I have a nice 1938 Harley Big twin frame and a 40 an early ULH Flathead tank to trade or will pay cash.Thanks Tom (913)271-4812

125. bigyellowt@yahoo.com message: Wanted to buy a orig. paint pre 1916 motorcycle or motorcycles today ,please call Vince at 530 305 6979 or email me at bigyellowt@yahoo.com

124. sthellusson@gmail.com message: need almost everything for a 1920 ace.will take new or original parts
would like original messinger saddle so that i can make new ones,also original headlamp i have 4 silversmiths who can easily
fabricate shapedparts.I am missing front cover for front of engine
for timing gears.have indian ace exhaust manifold need ace pattern one.london phones 020 8 8094991 o7796113330

123. craigbgreen@yahoo.com message: Looking for wl/wla frame for a bobber project. I do not need a nos frame for a perfect restorations on this one (rough is ok). I also am looking for 18" clincher rear wheel for peashooter or DL project. 1930-31 drop center might due. Let me know what ya got, Thanks Craig @ craigbgreen@yahoo.com

122. hd36ohv&&&@yahoo.com message: Wanted: Early HD knucklehead front head in any condition. Small port 36 to 39. Cash or trade. Remove &&& to email. Jerry

121. advancom@aol.com message: In dire need of a rear fender for my 1939 Knucklehead project.
Will pay top dollar for an original 1939 to 1946 rear fender.
Thanks
Greg

120. fred@fjwillert.com message: wanted rear fender and tailight for 1938 Harley-Davidson WLD. also aircleaner for 1938 Harley-Daidson

119. 56panstroker@live.com message: Looking for tapered shaft 1.5" primary belt drive for a panhead. Do NOT want a open drive. Looking for 1.5" so i can run it enclosed. Complete would be great. But let me know what you have.. Email me please if you have such items. Have cash ready!!!!

118. llwauto@aol.com message: indian 101 scout 7 bolt front cylinder . allso 32 harley vl cases with good vin#

117. frantic.city@gmail.com message: DONUTS HERE,FREE DONUTS ....DID I MENTION THAT..... JUST 1 CATCH, WANT all THE POLICE STUFF THATS BEEN PUT AWAY FOR ALL THOSE YEARS, INCLUDING THE RADIOS,SIRENS,1ST AID BOXES,BILLY CLUBS,TICKET BOOKS AND OH YEA............. LETS NOT FORGET THE 2000.00 BATTERIES, AND BELIEVE IT OR NOT WE ARE DROP OVER DEAD SERIOUS, TIMES A WASTIN BOYS AND GIRLS..........LETS GO AND GEORGE YOURE THE BEST

116. ironpan@aol.com message: Looking for the following: speedo frame mount for a late 47 kuck original, (x-35/12), will consider whole neck. Need nice 57 handshift gas tanks, have 57 FL footshift tanks to trade. Need original 48 parts mannual. Need large port 47 kuck alum rocker boxes. Please send pictures, i do have good items to trade and all reasonable money offers considered, no junk please!

115. f-14mek@yahoo.com message: Wanted: sidecar spare tire rack and spinner for dutch shoe 1930's Harley VL sidecar. Reproduction if nothing else will do. Measurements or photos of yours will work also. Robert 757-421-9255 east coast time

114. softtail5@hotmail.com message: looking for 15-19 excelsior parts. frame, gas/oil tank or what do you have?

113. chrisbastiaansen@hotmail.com message: Wanted : Henderson KJ inlet manufold / rockerbox no broken ears please, generator bracket and an complete exhaust, want to pay serious money, thanks

112. danielmobati@yahoo.com message: Wanted: HENDERSON: 1913-1918 Henderson parts, engine, frame, etc. Just about anything Henderson realted.

111. thelooseends***band@gmail.com message: WANTED: Harley 1941-46 Civilian Speedo in original condition. Have a '41-'46 WLA (military) speedo in original condition to trade or will buy yours. My WLA speedo shows 44,174 miles. Email for pics: (take out the ***)Thanks!!! Gerald 417-276-9908

110. kahessian@aol.com message: I need a June or July of 56 K or XL frame (6F or 6G). I have other early frames to trade or will buy outright.

109. markXXX@XXXXlinkcycles.com message: Remove X's from around @ for correct email.
I just listed a very unusual Harley JD part on Ebay. It is an alloy cover with an ADDITIONAL oil pump installed. Original oil pump is complete and working. Second pump would be used to pump oil directly to the cylinders or to an overhead valve modification. Ebay user ID is MMASAHD I also have some other JD parts listed including a Doughboy headlight and a 1916 and 1917 only luggage rack bracket.

108. bigyellowt@yahoo.com message: Wanted to buy a stock orig. solo seat for a 1957 Sportster will pay cash or have a nice stock orig.and rare dual pass.1957 Sporster seat with chrome grab handles to trade or other mc parts to trade too!

107. chief348@juno.com message: Wanted 9-7-08; Looking for a nice 41-45, 46-47 Bullneck or Late 47 Knuckle Frame. Have a mint condition 56 Straightleg with 55-56 Footshift Gas Tanks to trade or sell outright for $3,400.

106. bbop@dblclickit.com message: 1972 harley davidson shortster seat. no tears or rips.tanks

105. saintdave23@hotmail.com message: Wanted Gas tanks: a set of 1955 or 1956 Harley Davidson FL, Tank shift Gas Tanks and/or emblems for same.

104. gabri3ride@studioassociatomonica.com message: knuklehead and panhead (also bobber style) with original and matching parts wanted, please mail me pics - and description and your request

103. dkafton@clearwire.net message: HELP WANTED: Hi all, I would like to know if anyone attended the Davenport Iowa swap meet this year and got ANY good pictures of the board track races? I own the Iron Dinosaur board tracker and took 2nd place and don't have any good pictures of the finish. We lost by about a wheel legenth and would really like to see some good digital pictures or better yet, a video. Thank you in advance, Dave (209)368-7259

102. tbarlett@embarqmail.com message: Wanted - Parts for 47 UL Harley. Need bull neck frame, left 47-48 gas tank,speedo and fenders. I have a nice 1938 big twin frame and a right 37-39 UL gas tank for possible trade.Also need a 41-46 frame for 44 U project. Also need 47 tanks for a 47 EL, have a set of 41-46 tanks for possible trade. Please call Tom 913-271-4812, or email , please remove brackets to send email.

101. tcmorrow@yahoo.com message: 1977 FXS Lowrider tank panel- original wrinkle black.- handlebar controls- clutch and brake side. rear disc caliper, disc, and the caliper mount,spacers etc. original factory wiring harness.
thanks
tom

100. bigyellowt@yahoo.com message: Wanted to buy barn fresh stash! of someones life long collection pre 1916 motorcycles and parts ,street bikes and boardtrack racer's,twins and singles,belt drive and chain drive,running cond. or not, from orig. paint to no paint,odd brands are fine,can pick up anywere in the US ,finders fee paid $$$ for leads,please email bigyellowt@yahoo.com or call 530 305-6979

99. thelooseends***band@gmail.com message: WANTED: stock parts for '46 Knucklehead...rocker clutch assy, rear brake pedal assy, rear brake drum, oil tank, inner/outer primary, etc. I have a bunch of this stuff on my bike that has been chromed and want to back with the black stuff. Will buy or trade. Take out the *** in the email address, or call 417-276-9908 (Gerald) Thanks George!!

98. loucev@aol.com message: Need a windshield for a hydra or duo glide. Plastic uppers or lowers with beaded edge. I don't need any mounting parts. Just Good to Excellent plastic only. Thank you.
loucev@aol.com

97. indian_29@hotmail.com message: Cast iron piston for 1925 Harley 1000, standard dimension or 5 or 10 thou oversize in good useable cond. Also 44t. dished rear sprocket wanted.

96. webster@vfemail.net message: Typo on pervious add. Looking for tapered shaft primary belt drive for a panhead. Do NOT want a open drive. Looking for 1.5" so i can run it enclosed. Complete would be great. But let me know what you have.. Email me please if you have such items.

95. webster@vfemail.net message: Looking for panhead tpaered shaft primary belt drive. 1.5" so i can use it enclosed. Do not want an open drive. Email me if you have such items please!!

94. brousso@cgocable.ca message: Hi all , I am looking for , one set rocker lifters for complete my project Indian Scout 101 45 1931,
brousso@cgocable.ca
Thanks Georges !!

93. fredrik@vildabomben.com message: Wanted M-35 Carburettor, for restoration.

92. DPATCH2@KC.RR.COM message: WANTED 1955 PANHEAD STRAIGHT LEG FRAME WILL CONSIDER MOST ANY THING HAVE A 1956 TO TRADE OR CASH WAITING 913 268 5314 DAN

91. 750uhv@gmail.com message: Looking for one body support, a brake drum and a complete set of spring shackles for a 43M package truck.
Thanks.

90. striderer@yahoo.com message: WANTED,AN ORIGINAL PARKING BRAKE ASSEMBLY TO FIT A 1940s MODEL SERVI-CAR

89. bruffsup@yahoo.com message: TRADE ONLY 1913 HARLEY TWIN IN PERFECT ORIGINAL CONDITION FOR BEST BROUGH SUPERIOR OFFERED

88. hd36ohv@hotmail.com message: Wnated buyers for: M-53 bombsight and M-51L Linkert carburators, 1949 type police spotlights, NOS accessory Oil level gauge - on ebay user name is knucklehead_alchemy.
Thanks George

87. v-twin@mail.dk message: I´m looking after a headlight and horn for my Harley-Davidson JD 1919

86. bigyellowt@yahoo.com message: Wanted to Buy A orig. 1907 or 1908 Indian seat frame pipe bracket's that mounts into seat post and bolts to rear wheel axle,( monkey on a stick ) have cash and a orig. stanard 07 seat post frame and cash to trade also wanted a orig. battery tube for the 07 Indian single will be at Davenport my cell is 530 305 6979

85. dmf-Williams3468@damailbox.com message: You have some great products.

84. cbarnes@bemainc.com message: Looking for a 1947 Harley 45. Running if possible, but not necessary. This is a nostalgia rebuild as a tribute to my father who started me riding at age 4 ... 53 years ago. Willing to pay as I know these items are not common or inexpensive.

83. hitzeleric@netscape.net message: DON'T GO TO DAVENPORT WITH A LINKERT M5 CARBURETOR! Sell it to me!!!!!! Call 716 725 5289 or email me at hitzeleric@netscape.net

82. fastboyhd$$$@bellsouth.net message: i need a pair of left hand shift 51-53 gas and oil tanks for a 53 servicar. 51-52 solo is the same. not looking to steal them from you---i will pay for good ones or have lots of pan and knuckle parts to trade. leave out the $$$ on email or call me at six one five--830-5802. thank you george

81. scotty@gmail.com message: clomid and birth defects
http://www.youtube.com/watch?v=W_A7HFqrTkw
[url=http://www.youtube.com/watch?v=W_A7HFqrTkw]clomid and birth defects[url]
clomid unexplained infertility
http://www.youtube.com/watch?v=GPsV07UpLTs
[url=http://www.youtube.com/watch?v=GPsV07UpLTs]clomid unexplained infertility[url]
clomid multiple pregnancies
http://www.youtube.com/watch?v=osxVBoRb6HM
[url=http://www.youtube.com/watch?v=osxVBoRb6HM]clomid multiple pregnancies[url]
clomid and ovarian hyperstimulation
http://www.youtube.com/watch?v=-9Jbn8kzcjQ
[url=http://www.youtube.com/watch?v=-9Jbn8kzcjQ]clomid and ovarian hyperstimulation[url]
clomid aspirin
http://www.youtube.com/watch?v=u9in1_QOeu0
[url=http://www.youtube.com/watch?v=u9in1_QOeu0]clomid aspirin[url]

80. chrisginni@ohio.net message: Looking for a set of Harley VL sidecar leaf springs or one I could use for a pattern.Also looking for a repairable VL sidecar body. Thanks Chris 440-974-1641 home and 216-701-6498 cell

79. peter.salt@exprogroup.com message: 74ci U motor complete ideally 1941,42,43 or good engine casings, barrels, heads.

78. jpatrick@mountaincable.net message: I am looking for the lower front end fork for a 1917 Model O Indian, this takes a plunger style suspension spring connecting the top fork to the bottom like the early Indians. I also require a Magneto for the same bike, it's a Dixie mag, model S-7. I'm still trying to find many other parts, so if you think you might have something drop me a line. Thanks Greg

77. petebt@yahoo.com message: I am looking for WA. motorcycle plates. years '35 '38 '46. thanks!

76. thelooseends***band@gmail.com message: WANTED TO TRADE: I have a complete (less carb) and running Harley 1947 WL engine with clear title (super condition), that I want to trade for a Harley 1941-46 complete and running engine. I'm located in SW Missouri. Call: 417-276-9908 or email (take out the ***)
Thanks, George!!

75. lee222@maplenet.net message: I am looking for a uncut, 1940 knucklehead frame. Will buy outright
or, I have a 1938 frame, to trade. I will be at the Davenport,
AMCA meet spaces C&D 21

74. sskustom@yahoo.com message: I need a oem panhead rigid. Staight leg or wishbone. needs stock neck and axle casting.

73. olebmw@aol.com message: I need an engine mounted V belt Eclipse clutch. I have a flat belt clutch to trade.Can bring to Davenport.

72. fatdog1903$$@yahoo.com message: Need clutch pedal and strap complete for Harley 45 Part number 50543-38, can be rough but needs to be useable. lots to trade or cash. Thanks.... Fatdog! www.fatdogvintagesalvage.com remove $$ from email! Thanks George!

71. hythunder@aol.com message: hummer engine parts

70. alvin65_99@yahoo.com message: Wanted For a 1964 FL 3 light dash,complete stainless air cleaner with the bolt in the center.Front & rear fender tips.rails for the saddlebags.Thanks, 724 333 5469 alvin65_99@yahoo.com

69. fastboyhd@$$$bellsouth.net message: fastboyhd@$$$bellsouth.net message: i need a pair of left hand shift 51-53 gas and oil tanks for a 53 servicar. 51-52 solo is the same. not looking to steal them from you---i will pay for good ones or have lots of pan and knuckle parts to trade. leave out the $$$ on email or call me at six one five--830-5802. thank you george

68. mscottharley!!!@sasktel.net message: WANTED- HARLEY OR INDIAN 45" PROJECT OR BASKET.REMOVE !!! FROM EMAIL.
THANKS GEORGE.

67. fakeit@bellsouth.net message: I NEED A TAILLIGHT ASSY. AND A SET OF LEAF SPRINGS FOR A 1944 INDIAN MILITARY RESTORATION. ALSO A COMPLETE 1936 AND 1939 INDIAN 4 CYL.MOTOR ASSY. THANKS!

66. hitzeleric@netscape.net message: Looking for an Linkert M5 Carburetor for a 39 knuckle. I will pay CASH! Email or call 716 725 5289

65. thelooseendsband@gmail.com message: WANTED: pair of Harley WLDR or WR cylinders, as long as they are good....bore size does not matter as long as they can be used on a running bike. Call: 417-276-9908 Will buy outright or will trade interesting parts...
Thanks, George!

64. chuck@vannuysharley.com message: **wanted** in need of a automatic advance unit for 61 G model servi-car. also looking for a running 33-34 UL unrestored beater i can fix and get back out on the road. Thanks George!!!

63. frantic.city@gmail.com message: OK, NOW ITS BEEN A MONTH OR SO SINCE THE 1ST WANTED AD FOR POLICE STUFF SURFACED, NOW DONT TELL ME ALL THE COPS BOUGHT THEIR OLD PANS AND KNUCKLES FROM THE DEPARTMENTS AND DECIDED THAT THEYRE THE ONLY ONES WHO SHOULD HAVE THEM, LETS FACE IT,THEYRE TOO BUSY TRYING TO FIGURE OUT WHAT JELLY DONUT THEY SHOULD HAVE NEXT, DROP DEAD SERIOUS AS ALWAYS,NOW LETS START DIGGIN THAT POLICE STUFF OUT OF THE CLOSETS AND GARAGES,WILL TRADE FOR CASH OR MAYBE A KRISPY-CREME FRANCHISE, AND AS ALWAYS,GEORGES IS THE BEST.

62. pvtcook@yahoo.com message: I need a military WLA seat tee. I also need a rear seat for my son to ride on.
662-415-1096

61. mscottharley!!!@sasktel.net message: WANTED- 38-40 HARLEY 45" 2 BOLT FRAME OR 36-39 45" FORKS.
CASH OR TRADE.REMOVE !!! FROM EMAIL.THANKS GEORGE.

60. indianchoutracer@yahoo.se message: Instrument panel cover 47 big twin.

59. wr_racer@hotmail.com message: parts needed to complete my 36 EL WANT ONLY OEM PARTS air cleaner, dash cover,rear brake drum,front three {3} piece crash guard,1 baby food jar lid,8 long lug nuts have cash to trade any help would be great thanks

58. bbop@dblclickit.com message: wanted 1948panhead big twin frount safty guard straight/good chrome no crash marks have trades or cash

57. theknucklehead@hotmail.com message: WANTED: BEEHIVE TAIL LIGHT-HARLEY DAVIDSON 1939-1941 STYLE-TYPE 1(glass held in by clips, no screws on the housing, Harley Davidson stamped). YOU HAVE THE PARTS, I HAVE THE CASH, LETS TRADE!

56. kentuapersson@telia.com message: Harley 1916 petroltanks and frontfork I have nice parts for trade. Kent

55. kentuapersson@telia.com message: Wanted IVER JOHNSON 1915-17 cylinder .

54. j.mueller-seidler@iht-gmbh.de message: I am looking for a old functional Harley Davidson WLDR or WL 750 R, EL

If you have some offer for me please contact me by email : j.mueller-seidler@iht-gmbh.de
Thanks and best regards
Jan Mueller-Seidler

53. montanaindian@hotmail.com message: $$$ WANTED $$$ Indian rigid frame and fork..406-434-2005

52. fastboyhd@$$$bellsouth.net message: i need a pair of left hand shift 51-53 gas and oil tanks for a 53 servicar. 51-52 solo is the same. not looking to steal them from you---i will pay for good ones or have lots of pan and knuckle parts to trade. leave out the $$$ on email or call me at six one five--830-5802. thank you george

51. hotrodndn*@comcast.net message: want winged cowell emblem for 59 R/E Chief,[curved one].Have 50-53 Chief[flat one] to trade.Still need a XL trumpet horn[short one].Thanks for the site! omit*

50. bigyellowt@yahoo.com message: Wanted 1912 Harley front fork and handle bars, have orig. 1915 front fork and bars to trade

49. anowka@gmail.com message: Wanted 1938 - 1939 Indian Four frame or any other 38-42 Indian Four engine parts. Thanks!

48. DPATCH2@KC.RR.COM message: WANTED 1955 PANHEAD FRAME ORIGINAL DAN 913 268 5314

47. jurassicracing(remove}@rushmore.com message: i'll pay 20 grand for a merkel twin motor,more if its got a clutch,carb or mag.or trade for pre 15 motorcycles.any motor parts or singles considered.i have cash.

46. wr_racer@hotmail.com message: still looking for OEM wheel lug nuts for a 36 el they are longer heads and thread nipple also head drilled for safty wire can buy or trade also need one 1 lid for the baby food jar valve sping cups also needed stock OEM AIR CLEANER AND REAR BRAKE DRUM TRYING TO FINISH THIS BIKE ANY HELP WOULD BE GREAT

45. hitzeleric@netscape.net message: Looking for an Linkert M5 Carburetor for a 39 knuckle. I will pay CASH! Email or call 716 725 5289

44. csymonds@bigpond.com.au message: looking for 1938 indian four oil pump

43. bigyellowt@yahoo.com message: Wanted to Buy $$$ 1912 to 1914 PEM,Waverly,Jefferson single or twin motor can pick up at Davenport. Vince my cell # is 530 305 6979

42. tommy@yahoo.com message: http://searchengines.o0o.ru/member.php?u=9056
http://searchengines.o0o.ru/member.php?u=9056
[url=http://searchengines.o0o.ru/member.php?u=9056]http://searchengines.o0o.ru/member.php?u=9056[url]
http://www.blister.ru/forum/member.php?u=7267
http://www.blister.ru/forum/member.php?u=7267
[url=http://www.blister.ru/forum/member.php?u=7267]http://www.blister.ru/forum/member.php?u=7267[url]
http://sovserv.ru/vbb/member.php?u=39018
http://sovserv.ru/vbb/member.php?u=39018
[url=http://sovserv.ru/vbb/member.php?u=39018]http://sovserv.ru/vbb/member.php?u=39018[url]
http://www.blister.ru/forum/member.php?u=7277
http://www.blister.ru/forum/member.php?u=7277
[url=http://www.blister.ru/forum/member.php?u=7277]http://www.blister.ru/forum/member.php?u=7277[url]
http://www.x-master.ru/mambo/forum/member.php?u=19047
http://www.x-master.ru/mambo/forum/member.php?u=19047
[url=http://www.x-master.ru/mambo/forum/member.php?u=19047]http://www.x-master.ru/mambo/forum/member.php?u=19047[url]

41. carlmessina@comcast.net message: I am looking for a rear brake banana caliper (Harley Only)for my 1973 Harley FHL. It needs to be in good condition and usable. Please contact me by email if you have one you are willing to part with.

40. bigyellowt@yahoo.com message: Looking for a orig. 1907 Indian head stock badge,orig.paint blue battery tube, orig. top motor mount,orig.narrow 5-20 drive chain

39. 1qazaq@roadrunner.com message: Need an offset springer fork, any condition, 1qazaq@roadrunner.com

38. fastboyhd@$$$bellsouth.net message: wanted---good set of 51-53 left hand shift gas tanks for servicar or 45 solo. will take anything from rusted and beat up to NOS. will pay for quality---remove the $$$ from email thank you george

37. fastboyhd@$$$bellsouth.net message: wanted---good set of 51-53 left hand shift gas tanks. will take anything from rusted and beat up to NOS. will pay for quality---remove the $$$ from email thank you george

36. fatdog1903@??yahoo.com message: Looking for 1914 Harley rear Freewheel cltch parts and rear 1914 single speed hub. Remove ?? from email Thanks FatDog

35. kebarton@cableone.net message: WANTED POWELL SCOOTER PARTS. Restoring a P-48. What do you have ??

34. hotrodndn*@comcast.net message: trade nice 42 od s/w for 41-46 civilian speedo. trade 45 fresh powder-coated rear springer leg for b/t leg..no repop JT!need a 42 cal. plate.omit * when emailing.

33. fatdog1903@??yahoo.com message: Looking for the countershaft parts for 1914 Harley also 1915 Harley single gas and oil tanks. Thanks FatDog Remove ??? in email

32. rolando@e-mailanywhere.com message: cialis levitra sales viagra levitra pill
http://www.youtube.com/watch?v=smei_9FBfAw
[url=http://www.youtube.com/watch?v=smei_9FBfAw]cialis levitra sales viagra levitra pill[url]
buy cialis cialisnarodru domain
http://www.youtube.com/watch?v=ND4OYcE8hxA
[url=http://www.youtube.com/watch?v=ND4OYcE8hxA]buy cialis cialisnarodru domain[url]
what is b cialis b
http://www.youtube.com/watch?v=wleAtuy13ac
[url=http://www.youtube.com/watch?v=wleAtuy13ac]what is b cialis b[url]
generic cialis pills
http://www.youtube.com/watch?v=qTaVvNYII0I
[url=http://www.youtube.com/watch?v=qTaVvNYII0I]generic cialis pills[url]
cialis obsessive compulsion
http://www.youtube.com/watch?v=Yh-mvAiIycQ
[url=http://www.youtube.com/watch?v=Yh-mvAiIycQ]cialis obsessive compulsion[url]

31. theknucklehead@hotmail.com message: WANTED: LOOKING FOR A 1941 HARLEY FRONT BRAKE PERCH AND LEVER. THE BRAKE PERCH DOES NOT HAVE A SLOT IN IT. LEVER AND PERCH ARE ALUMINUM. LEVER HAS NARROW SLOT FOR CABLE. ***TOP DOLLAR PAID***

30. theknucklehead@hotmail.com message: WANTED: 1941 CALIFORNIA MOTORCYCLE LICENSE PLATE. TOP DOLLAR PAID!!

29. amca2475@earthlink.net message: 4sale/trade? 41 Sport Scout front RIM fits 640,641,642 Sport Scouts, has 41 stamped

28. chrisginni@ohio.net message: Looking for a Early inlet manifold for a harly VL 1930to 1933. Thanks Chris 440-974-1641 or cell 216-701-6498

27. knuck39@yahoo.com message: I am looking to replace knuckle rocker boxes,cam covers and cases lost in a fire that burnt my shop and house to the ground july 8th..I am not looking to have things given away...just fair...lost were 6 sets of rocker boxes,6 cam covers and 4 sets of cases...That was just the knuckle stuff...there were 3 set of pan cases,6 sets of heads and 2 vl sets of cases with cam covers as well..There was a lot more that I won't even go into..Please let me know what you've got,and what you can do...much appreciated.Just trying to start to rebuild...knuck39@yahoo.com

26. btoband@gmail.com message: I need 1937 sportscout cylinders and heads. Any help would be appreciated!

Warren Lovell

25. flathead@sol.dk message: WANTED : 1936,1937,1938 or 1939 Knucklehead or engine only.
Only interested in original cases with factory numbers.
Thanks

24. nitroburn@inbox.com message: Wanted a Rigid Frame Sissybar. Needs to fit with the stock fender. Prefer a short one. Also priced for todays economy. In other words damn cheap. Dont care about the chrome as long as its straight.

23. jsrestore@aol.com message: WANTED< Early American Motorcycle Parts >...SUITCASES of CASH AVAILABLE FOR TRADE thanks Jon

22. HD48FL@AOL.COM message: Wanted - Original Inline Knucklehead Springer. Uncut and complete, preferably restored. E-mail me if you have anything, cash ready!

21. bLAKSHOV@YAHOO.COM message: LOOKING FOR A OEM PANHEAD FRAME. ANY YEAR WISHBONE OR STRAIGHT LEG. NEEDS STOCK NECK AND BRAKE CROSSOVERTUBE. NOT WORRIED ABOUT ANY SHAVED OR CHOPPED CASTINGS. JUST A 30 DEGREE NECK. CASH PAID.

20. DEWGARINC@888AOL.COM message: NEEDED FOR PROJECT 1913 HARLEY FRONT FORK ASSEMBLY,RUSTED , BENT , PARTS OF- PLEASE EMAIL WITH WHAT YOU HAVE REMOVE THE THREE EIGHTS FROM EMAIL ADDRESS THANKS

19. chrisginni@ohio.net message: Looking For a Harley VL sidecar Frame and mounts, Also looking for a Knucklehead front small port Head. Thanks Chris 440-974-1641 home and my cell 216-701-6498

18. frantic.city@gmail.com message: OH YES, AND BESIDES ALL THOSE 1000.00 NOS POLICE BATTERIES, EARLY RADIO EQUIPMENT AS WELL, AND LETS NOT FORGET ABOUT TICKET BOOKS AND THE CLIPBOARDS AS WELL, START DIGGIN, WE ALL KNOW ITS OUT THERE,AND AS ALWAYS, I'M DROP-DEAD SERIOUS. GEORGE YOURE #1.

17. $$4cylchevs@xcelco.on.ca$$ message: looking for rigid frame indian scout project prefer rolling but will accept basket case or your unfinished bobber style bike. send pix's and price.

could pick up at davenport

remove all $$ from email

thanks in advance and a big thanks to george

16. rylan@mail.ru message: acetaminophen phenylephrine guaifenesin
http://www.youtube.com/watch?v=RmzQKgBxkMU
[url=http://www.youtube.com/watch?v=RmzQKgBxkMU]acetaminophen phenylephrine guaifenesin[url]
accupril charlie horse
http://www.youtube.com/watch?v=kYqcqjb9ib0
[url=http://www.youtube.com/watch?v=kYqcqjb9ib0]accupril charlie horse[url]
acetaminophen as pain reliever
http://www.youtube.com/watch?v=DtGgPdM573Y
[url=http://www.youtube.com/watch?v=DtGgPdM573Y]acetaminophen as pain reliever[url]
20mg accupril
http://www.youtube.com/watch?v=b6eEFy8jC_s
[url=http://www.youtube.com/watch?v=b6eEFy8jC_s]20mg accupril[url]
acetaminophen and ibuprofen reaction
http://www.youtube.com/watch?v=CzbOp6C_pgY
[url=http://www.youtube.com/watch?v=CzbOp6C_pgY]acetaminophen and ibuprofen reaction[url]

15. lmharley@truvista.net message: Looking for the following parts for a right-hand shift knucklehead:

33692-37 (need 2) - Shifter intermediate lever
33695-37 - Shifter connector link
33696-37 - Shifter connector link clevis
33697-37 - Gear shifter cross shaft
33703-37 (need 2) - Shifter crossover shaft bracket bushing
33707-37 - Shifter crossover shaft bracket
33855-37 - Shifter rod
24794-37 (need 2) - Crossshaft center bolt

FYI, these are shown in the diagram on P.74 of the '41 - '54 parts catalog and are the components less the washers and nuts, everything from the end of the shifter lever to the trans.

Any help or leads you can offer would be appreciated. Thanks.

Lonnie C from SC

14. ulf.lindahl@telia.com message: Front End /Fork for a Sportster 1971 wanted (drumbrakes) send me a mail to ulf.lindahl@telia.com , or give me a call at +46 709 615150, shipping to Michigan or Sweden. Regards Ulf Lindahl

13. henderson@c.dk message: SIDECAR for Harley Davidson VL 1930 (with brake).
Thanks George.

12. pnshunter@comcast.net message: Want goodyear 4.25x18 at for early sportster

11. dustinrsnow@yahoo.com message: want to buy A flathead would prefer a big twin but not picky will take a 45" it must not be restored thats the fun part!

10. hd36////ohv@yahoo.com message: I am in need of a lower crankcase and a front gear cover for a 1934 Indian 4. Interested in any year and repop ok. Have cash or some parts to trade. Remove //// to email. Thanks

9. moises@mail.ru message: http://www.youtube.com/watch?v=_Dz9C6klnyE
http://www.youtube.com/watch?v=_Dz9C6klnyE
[url=http://www.youtube.com/watch?v=_Dz9C6klnyE]http://www.youtube.com/watch?v=_Dz9C6klnyE[url]
http://www.youtube.com/watch?v=Z8FV5yZ9SFk
http://www.youtube.com/watch?v=Z8FV5yZ9SFk
[url=http://www.youtube.com/watch?v=Z8FV5yZ9SFk]http://www.youtube.com/watch?v=Z8FV5yZ9SFk[url]
http://www.youtube.com/watch?v=Z8FV5yZ9SFk
http://www.youtube.com/watch?v=Z8FV5yZ9SFk
[url=http://www.youtube.com/watch?v=Z8FV5yZ9SFk]http://www.youtube.com/watch?v=Z8FV5yZ9SFk[url]
http://www.youtube.com/watch?v=b62_xy50oyw
http://www.youtube.com/watch?v=b62_xy50oyw
[url=http://www.youtube.com/watch?v=b62_xy50oyw]http://www.youtube.com/watch?v=b62_xy50oyw[url]
http://www.youtube.com/watch?v=okx1YEeOxeo
http://www.youtube.com/watch?v=okx1YEeOxeo
[url=http://www.youtube.com/watch?v=okx1YEeOxeo]http://www.youtube.com/watch?v=okx1YEeOxeo[url]

8. lcymansky@yahoo.com message: Looking for 1940 or newer indian chief.Must be in running condition,under $25,000.00

7. oldcycle@rogers.com message: WANTED;seriously in need of 1906 Indian parts,any spare parts will be greatly appreciated,pedal cranks,manifold,gas tank,oil tank.Also in need of 1907 Reading Standard cranks and ecentrics.Please send reply or call Rick at 519-641-1878

6. jk.loesch@neohio.twcbc.com message: Inner Fender (steel, P/N 59616-71) as used on 1971/1972 "boattail" Super Glides. Let me know what you have. John, 440-785-1707

5. hitzeleric@netscape.net message: I am looking for an M5 carb for my 39 knuckle. I will pay cash!!!! Please contact me by email or phone 716 725-5289.

4. bigyellowt@yahoo.com message: Looking to Buy pre 1916 Motorcycle parts inventorys,like motor's,frame's,wheels,gas tanks,fenders ect.,looking for the odd brands

3. frantic.city@gmail.com message: THIS IS SIMPLE................, I WANT ANY AND ALL POLICE-RELATED ACCESSORIES FOR PANHEAD AND KNUCKLEHEAD BIKES, AND TO MAKE IT EVEN EASIER,RIGID FRAME ONLY, ESPECIALLY LIKE THE NOS 1000.00 POLICE BATTERIES, REACH ME AT: FRANTIC.CITY@GMAIL.COM DON'T WAIT, I'M DROP-DEAD SERIOUS, THANKS GEORGE, YOURE THE BEST

2. meREMOVETHISPART@joestuff.com message: WTB: original early sportster XLCH shocks, for my 62 XLCH. I believe fitment was 58 to 65 with Black to spring retainers and cad cam adjustors.

Also looking for correct foot pegs, and a short duel seat or pogo seat assembly.

1. supreme1985@gmx.net message: Searchin for Harley JD Cylinders, please tell me what you got.restored ones or chunk doesn´t matter.
Please write me an email

March 2008

225. harley42fl@aol.com message: I am looking for a red plastic kicker pedal block for a restoration. I have the red plastic grips that were used on knuckleheads in 45 and 46 and were later an accessory. NOS is preferred but will consider any condition. Thanks

224. tombarrera@hotmail.com message: antique harley side car

223. theknucklehead@hotmail.com message: WANTED!!! 1941 HARLEY FL KNUCKLEHEAD TO RESTORE. MOTOR ONLY, CASES ONLY, OR COMPLETE BASKET CASE. PLEASE E-MAIL, I HAVE THE CASH!! YOU HAVE THE PARTS, LET'S TRADE!!!

222. *dan*margolien@yahoo.com message: Looking for original Harley front fender and tanks for a '67 FL. Original paint bike damaged by run in with a deer. Black and Birch white, will consider all for repainting.

Please remove * from email address.

THX!

221. blakshov@yahoo.com message: I am looking for S&S L carbs and parts. Please let me know what you have.

220. swhite48@verizon.net message: I am looking for parts for a "1949 Indian Papoose". Horn, center stand, seat if very good condition and headlight glass, original dunlap tires and wiring harness. If interested e-mail Susan at swhite48@verizon.net Thank you.

219. whadarush@t6b.com message: Wanted ride control upper bracket spacer tube H.D.part#13427-33
5 7/8" long 5/8" OD. 1/2"ID Please contact me at whadarush@t6b.com

218. braxton@hotbox.com message: 258141dc0fcee138f69dda5992b2cb55
http://njdokj.info/d10058c190d96ffd1e4ea5507bfb684b/258141dc0fcee138f69dda5992b2cb55
http://njdokj.info/d10058c190d96ffd1e4ea5507bfb684b/258141dc0fcee138f69dda5992b2cb55
[url]http://njdokj.info/d10058c190d96ffd1e4ea5507bfb684b/258141dc0fcee138f69dda5992b2cb55[url]

217. harley35@bigpond.com message: wanted j model harley suitable for restoration.
i live in australia and will consider importing from overseas
thanks john

216. fgary@adelphia.net message: I need 1918 Indian sidecar attaching hardware. All couplers and the front lower bar. May have an earlier lower rear mount to trade. One or both springs.
I need a door at least for a template. Any interior wood or panels for templates. Cleveland single parts wanted. Will be at Wauseon 2008. Call Gary :440-639-0858 Thank You George!!

215. jcsrestoration@yahoo.com message: Wanted: 1905-1925 bicycle motor or Motorbike or lightweight motorcycle engine. Email me if you have something. Evans, Erie, Steffey, Shaw, among many others. Thanks George.
Dave
WI
AMCA#1388

214. Castillo.atlantico@gmail.com message: Looking for a '59 Harley Davidson. Please send email with brief description

213. theknucklehead@hotmail.com message: Looking for a 1941 Harley Knucklehead FL (74 ci.) project bike. Must have a majority of the correct parts. No junk please. Contact me via e-mail. Thanks

212. monukes@peoplepc.com message: WANTED: ORIGINAL PAINT FRONT FENDER HI-FI PURPLE FOR 63-64 BIG TWIN
THANKS GEORGE

211. donvito17@comcast.net message: WANTED: Original Sam Opie Cut-Down Bike, Frame/Forks, Fenders,
Parts, Anything---Sam Opie!---Thank You!

210. emudad@yahoo.com message: 1935 RLD Tanks and Bars. I also need a good frame restore for the same 35.

Thanks You for any help

209. bigyellowt@yahoo.com message: Looking to buy Henderson KJ front fork and other mis. KJ parts also Wanted Flying Merkel parts and 1912 Emblem manifold too! call 530 305 6979 or email me. have 1929 ? Indian 4 chassic for trade or will sell,has frame,handle bars,forks,wheels,fenders,and tail light

208. lee222@maplenet.net message: Hi, I have a very nice 1938 Harley frame, willing to trade for a
like condition 1940 frame, will be at the Wauseon, OH. AMCA swapmeet
Thanks Lee

207. fam.droogsma@knid.nl message: Hi, I´m looking for some rear wheel studs for a servicar ´71, if you can get me some (total 10) I would be gratefull partnumber 83917-51

206. stefan@ecn.net.au message: wanted; New Departure pedaling wheel for early Indian motorcycle. thanks peter

205. voicecad@gmail.com message: DAYTON parts wanted, especially 3 speed gearbox. Better frame than my circa 1917 would be desired too. Please contact me via email at voicecad@gmail.com
Thanks

Michael Voice

204. dandgweiss@gmail.com message: Looking for Bosch mag/dyno Any d model preferably for indian twin

203. Blakshov@yahoo.com message: I am looking for S&S L series or dual thraots carbs. Any parts, intakes, breathers etc.
Please look thru your parts cash paid.

202. harleyxa@hotmail.com message: Looking for a running, already registered, reliable 1964 or later Servi-Car or other Harley-powered trike. Actually prefer Pan or Shovel motor but a GE would work too!

Must be located in California or Southern Oregon or Nevada.

Must have a reverse.

Doesn't necessarily have to be pretty but MUST be reliable!

Price range is $7,000 to $9,000.

Please reply via my email. Thanks George for the site.

201. jsrestore@aol.com message: WANTED ,,,,,,,1914 CYCLONE MOTOR,,,, CHEAP,, thanks Jon

200. classicmtr@yahoo.com message: Looking for a Schebler DLX 102 Carb...Complete carb or carb body. Call 562-434-9772.

199. donvito17@comcast.net message: WANTED---Excellent Condition Standard Bore 1928 Or 1929 Harley JDH
Cylinders, Pairs Or Singles---Any & All Help, Greatly Appreciated---
Mike Ceklovsky---(916) 962-2942 Or (916) 320-1946

198. bigyellowt@yahoo.com message: Wanted to buy ! Jefferson/Waverley motor,single or twin and mis. parts also Wanted 1909 to 1915 Flying Merkel parts call 530 305 6979 or email me photo and price.

197. amca2475@earthlink.net message: 48 Chief parts, plus more.

196. amca2475@earthlink.net message: 1. WW2 Indian 741 Military Scout 500cc N.O.S. MUFFLER (Nelson Muffler Corp.)still has some comsmoline and wrapping on it,never mounted. NO RUST! 2. Indian CHIEF '37 ONLY SHIFTER righthand side(Excellent ORIGINAL condition,may be NOS?). 3. 48 CHIEF NOS Stewart Warner Front Brake SPEEDO DRIVE Complete w/fiber Gear ALL NOS never mounted. 4. Military CHIEF (74ci = 1200cc) N.O.S. OD GREEN rear FENDER MOUNTS (6 total,different lengths). 5. N.O.S. 1947-up INDIAN CHIEF FRONT FENDER LIGHT ,the best stuff is not cheap.

195. mkmclm@msn.com message: 1929 Harley davidson Restoration Parts needed
Im looking for the following parts for my husband's harley that he is restoring. Do you have the any of the following:

Gear Box Grease Tube part# 2332-25 for 1929 or the 2332-30 for the 1930

Gas Priming Pump #3517-25

Tool Box Transfer #5919-08
Front Check Strap #6587-28
Rear Check Strapw/ end # 6555-28

If you do not, please forward any contacts that might. I would really appreciate it- trying to get these items for a birthday present and found his little list! Thanks

194. monukes@peoplepc.com message: WANTED 1940 U/UL

193. loginrc@bellsouth.net message: Need Harley 1955 FL front fender badge.

192. chrisginni@ohio.net message: Wanted-I need a set of small port head for a 1938 or 1939 Knucklehead. Thanks Chris 440-974-1641 or cell 216-701-6498

191. jonl@thefireplaceguy.com message: 36 Knucklehead parts needed, REAR HEAD - GAS TANKS 507-420-1777

190. fgary@adelphia.net message: I would like to have a side car to put on a 1918 powerplus. I would prefer unrestoried as I don't want to restore the machine.The machine is in it's surface rust patina. All considered. Call or email : Gary 440-639-0858 Thank you! And Thank you ,George!!

189. dougthedog565@yahoo.com message: 2-brake drums-oem 83800-51,rear brake shoess oem lh-83302-51-rh-83300-51 - 2 rear brake cyln.83460-51- 2 spring brake hold down oem-83371-51-2 spring brake,clyn. end-oem-83373-51- 2 spring brake anchor end-oem-83375-51 - 2lock washer bearing end-oem-83154-32 2 oil seals -oem-83163-51 -2 thrush washers-oem-83164-32 2 spring rings oem-83166-32- 2 axle shaft spacers -oem-82900-51. thank you doug

188. cheidinger1225@aol.com message: I am seeking a seat for a 1965 Harley Davidson Electraglide, or a source for a replacement cover for the same make and model. The original seat is coming apart at the seams. Note: the original seat is a buddy seat with a white cover.

187. dewgarinc@securespeed.us message: Wanted front wheel and brake 29 harley B single 1928-1934 OR 1929 C SINGLE OR 45 SMALL BRAKE app. 6 1/2 inches needed for my wifes bike!
please call 207-926-3358 anytime or email dewgarinc@securespeed.us

THANKS

186. larrysbullies@bellsouth.net message: Looking for nos shovel motor 74 or 80 ci must be nos call 270-265-7759 or email larrysbullies@bellsouth.net

185. claytonrestall@hotmail.com message: Hi. I still need these parts for 1939 Harley model U: seat, toolbox, carb cover, speedo, footboards (same as a 45), both heads, oil tank, and the tail light. Cash or possibly trade a 1937 only big twin oil tank, complete with lines and fittings. Thanks, George.

184. claytonrestall@hotmail.com message: Hi. I still need these parts for 1939 Harley model U: seat, toolbox, carb cover, speedo, footboards (same as a 45), both heads, oil tank, and the tail light. Cash or possibly trade a 1937 only big twin oil tank, complete with lines and fittings. Thanks, George.

183. claytonrestall@hotmail.com message: Hi. I still need these parts for 1939 Harley model U: seat, toolbox, carb cover, speedo, footboards (same as a 45), both heads, oil tank, and the tail light. Cash or possibly trade a 1937 only big twin oil tank, complete with lines and fittings. Thanks, George.

182. jpaponne@yahoo.com.ar message: Wanted Harley Davidson 1925 or 1926 JD motor case (number side), I have originals american parts for trade, Buenos Aires, Argentina, Thanks.

181. valron@atlanticbb.net message: WANTED:LOOKIN' FOR A COMPLETE ROCKER CLUTCH ASSEMBLY FOR A '62 PAN. SUPPOSED TO BE DIFFERENT THAN THE EARLY PANS AND KNUCKLES. I DON'T KNOW, I NEVER SAW ONE. HAVE CASH. ANY HELP APPRECIATED. THANKS, RON.

180. kprovencio1@netzero.net message: hi looking for good tranny case early type kick only for my pan hopefully not to pricey,also how rare is a m-36 linkert i piced 1 up but had never seeen this model before.
thanks in advance,tj

179. indianfourdoc@aol.com message: Indian Princess sidecar, 1935-1939 era, complete with brake. Does not have to be fully restored or recently restored, but must be all there and restorable. Marty

178. redfernmotorparts@bigpond.com message: WANTED, further to my last request for a SET of heads, a REAR Panhead cylinder head with -55 markings for a 1956 FL, would suit also. Thanks.

177. redfernmotorparts@bigpond.com message: WANTED Harley-Davidson Panhead cylinder heads, with the casting number showing -55.
This set is for my 1956 FL.
Can anyone assist?
Thanks and many thanks George!!
Tony redfernmotorparts@bigpond.com

176. Blakshov@yahoo.com message: I want to buy S&S L series carbs. I will buy the complete carb or just parts. thanks seth

175. dkafton@clearwire.net message: DIXON NATIONAL SWAP MEET: This is just to give everyone a heads up that the Dixon swap meet and show is next weekend June 20& 21. Sponcered by the Fort Sutter AMCA of Sacramento, Ca. Come and check us out at the Dixon fairgrounds. We are having a banquet dinner on friday night with a guest speaker and raffle prizes. On Saturday we're having a show, field events, food and swap meet.

174. pine@phreego.com message: wanted 1941 and 1957 maryland motorcycle tags.in runable shape. thanks G.

173. troyez66@hotmail.com message: wanted indian sidecar glass windscreen with side wings repro or original. trade or cash

172. ziggy@ziggysmotorworks.com message: Dixon CA. amca national swap meet is in less than 2 weeks ( june 20-21) what do you want to buy?
call or e mail with requests so we can try to bring what you are looking for
ziggys 360 871-8120

171. flathead@sol.dk message: WANTED 1936-1937-1938-1939 or 1940 Knucklehead engine or complete bike. I'm only interested in original parts.....
Mail me pix, price and your phone number
Thanks Søren

170. flathead@sol.dk message: WANTED 1936-1937-1938-1939 or 1940 Knucklehead engine or complete bike. I'm only interested in original parts.....
Mail me pix, price and your phone number
Thanks Søren

169. union.jack@wxs.nl message: For my project I looking for a pair of 41 WL cases. All offers are welcome. Best regards, Martin.

168. harleyman53@spray.se message: Hej!
I need a pair of off-line springerbars! Internals and everything. Pleace send me an e-mail if you got one for sale. And pleace, no sky high price!!!
Regards: Sweden

167. Waynef250@cox.net message: Excellent condition 1961 {or thereabouts} Harley Davidson with tank shift

166. **salo342@gmail.com** message: Wanted: Henderson Deluxe parts. I got Deluxe or Harly JD parts to trade if interested. Email for photo's or lists. Leave out "**"s

165. hotrodndn#@comcast.net message: Wanted 33 Chief cases CEC. Have other years to trade Want 36-39 Chief frame. Have nice 1o1, 46,47,48 frame to trade.Wanted 41-45 HD B/T frame.Have very restorable early 37 frame to trade. Let me know before Dixon[NorCal] to make a deal.[ omit #]

164. hotrodndn#@comcast.net message: Wanted 33 Chief cases CEC. Have other years to trade Want 36-39 Chief frame. Have nice 1o1, 46,47,48 frame to trade.Wanted 41-45 HD B/T frame.Have very restorable early 37 frame to trade. Let me know before Dixon[NorCal] to make a deal.

163. rudy4536@aol.com message: need a old (47)harley side car interior for a barn find runner,thanks

162. bklyndoc7@aol.com message: servicar complete 1958-1973

161. maximusroar@yahoo.com message: Wanted: Henderson Deluxe Frame, any condition. email me or call at 920.629.2520

160. jokerman115@aol.com message: Wanted Pictures of your original or restored Police Harley Davidson radio equipped motorcycle for police my personal cycle picture archive. Also need pictures of any vintage motorcycle radio equipment. Pre WW2 police cycle equipment of particular interest, Link etc. but not limited to. Please send to: Jokerman115@aol.com. Thanks

159. pigstye13@aol.com message: WANTED: I need one good original HD 45" springer rocker plate (the part the front axle goes thru) , even a old chromed one will work as I can strip the chrome and I have NOS bushings, so only the casting itself needs to be in nice condition. Anybody got one for sale?

158. curtisbrimley@yahoo.com message: looking for restorable harley topper scooter, any year.

157. kprchrm@yahoo.com message: I have finished restoring my 1947 knucklehead police.....I am looking for the radio setup....GE...or RCA... made from 1938-1948..need complete setup...left and right boxes ...receiver and power supply...speaker..antenna etc...looking to purchase a complete setup ..or individual pieces...radio chassis,power supply setup,coil boxes etc...I allready have the radio rack and new tubes for a RCA..but GE is also an option...WILL PAY TOP DOLLAR !! (depending on condition)...PAYMENT WILL BE IMMEDIATE..

156. jrklover@hotmail.com message: I am looking for a set of "grooved" push rod covers for my '38 knucklehead they are Colony part # 7133-8 I guess Colony stopped making them for knuckles a year or 2 ago, I'm sure somebody must have a set on their shelf. Thanks for the use of this forum George

155. ducajo@skynet.be message: hi, i am looking for a one year 1965 electra rear crash bar and caps,also for a one year vld1935 slash cut air intake,from belgium,pay shipping,paypal
thanks a lot

154. hotrodndn#@comcast.net message: wanted for 59 Chief,headlight nacel winged emblem. same as 50-53 Chief. 57 Sportster trumpet horn. Thanks George[omit# with response]

153. superman454@hotmail.com message: Looking for a complete brake system for my 1948 Pan

152. henn@geloman.de message: Henderson 4 motor wanted,1915-1919,anything considered.Hassle-free transaction guaranteed.Thanks,
Christian

151. pan54dd@aol.com message: Searching for a female connecting rod ZA-705, with no window, please send pictures if available, thanks for any help....Dave

150. oilleak@yahoo.com message: Looking for Indian 4 rocker covers,and kick assembly

149. Blakshov@yahoo.com message: I am looking for S&S L series carbs in any condition. Cash paid. Please look thru your parts.

148. footclutch@aol.com message: HENDERSON or Other? Gas Cap WANTED: For 1917?-1919. 1-1/4" X 24TPI. Anything, repro or original syringe type, or just cap with these threads. Need right away! Thanks for any help. John.

147. jpaponne@yahoo.com.ar message: Wanted; Harley Davidson 1914 twin parts, Buenos Aires, Argentina, Thanks

146. jpaponne@yahoo.com.ar message: Wanted; 101 Scout parts, Buenos Aires, Argentina, Thanks

145. bigyellowt@yahoo.com message: Buyer looking to pre arrange deal with seller on pre 1916 Motorcycles,parts and memorabilia would like to take delivery at Rhinebeck NY meet June 13-15th. please call Vince at 530 305 6979

144. telricks@gmail.com message: Looking for 1947 knucklehead engine, lower end or maybe complete. Need not be together

143. blakshov@yahoo.com message: I am looking for a good knucklehead engine. I want something that is in decent shape no junk. I have cash to spend. Please help me.

142. wmorgan2325@netzero.net message: I need an outer clutch shell for a 1981 sturgis belt primary please help.

141. ***gofarfast@gmail.com message: WANTED: Red lenses for Unity spotlights used on 1952 Indian cop bike. They measure just a tick under 4 1/4" in diameter. I prefer red but would accept blue, yellow lenses. Prefer getting 2 lenses but will accept one. Contact: ***gofarfast@gmail.com and delete the *** .

140. yorgtat@hotmail.com message: STILL LOOKING FOR A SET OF STELLING & HELLINGS ANGLED/BENT RISERS.....
ANY ONE GOT A SET PLEASE MAIL ME......$$$$$$ WAITING........

139. jim.snow@co.pierce.wi.us message: would like to find a vintage motorcycle jacket black or brown in color ,size is the most important thing .either a 50 or 52.if you can help me out please let me know .send me a email .thanks jim

138. vennepaul@gmail.com message: 1912-16 Excelsior parts wanted any condition: Need crankshaft drive sprocket 1912-14, exhaust pipe clamp nuts 1912-14, rocker cap clamp nut 1916-24, and oil metering valve to crankshaft that is in the oil line from the oil pump to the front cylinder 1915-24. Also various engine and chassis bits. What have you?............1913 Excelsior powered Indian board track racer, Oilzum X Special: 1913 Indian fork, races, goose neck and truss rods. No springs, rockers or linkage. Indian racing handlebars, 1913 Indian gas tank. Repros OK. Thanks, Paul

137. knuck39@yahoo.com message: Need an NOS feed pump for my 38UL..poured oil into it to finally fire it off,only to have it run right out the breather..Have had it off and apart 3 times cleaned it,stretched the springs,replaced the balls..etc.. and know I am going need to buy the tool to re-seat the ball..By the time I do ths,buy the kit to re-do the pump,pay freight,cod,etc...it just isn't worth it to me..I'd rather have new,and since I am not buying a taiwan pump for my bike...NOS is what I am after
If you've got one,or know where there might be one..please let me know...will pay your price...Cash or trades,all leads appreciated..Help me get this thing on the road!!! knuck39@yahoo.com

136. fgary@adelphia.net message: WANTED CLEVELAND AND NERACAR PARTS OR PROJECTS FOR RESTORATION.
CALL GARY 440-639-0858 NORTH EAST OHIO.
THANK YOU GEORGE

135. iburv@online.no message: For my Reading Standard 1920/22 I want both right and left side handlebar levers for clutch and brake handling.
Or borrowing for copying.
Best regards Ingulv.

134. bigyellowt@yahoo.com message: Does anyone have a odd orig. pre 1916 Motorcycle for sale ? if so email photo and price also interested in buying barn fresh pre 1916 collection of bikes and parts.

133. 1qazaq@roadrunner.com message: I need an offset rear springer leg, any condition considered! 1qazaq@roadrunner.com

132. barneswillis@yahoo.com message: wanted; anything RACYCLE- motorcycles, engines, saddles, etc...RACYCLE- bicycles, parts, chainrings, -literature. SMITH MOTOR WHEEL whole unit, parts-anything. thanks.

131. bbop@dblclickit.com message: spoofer probably goofer. noway to b.s.you. soundslike you have plenty. 3 parts and a palmer book.instant expert.please do not hang up

130. chief348@juno.com message: WANTED; 5-19-08 Need ONE lone 57 Gas Tank Emblem in any condition for a set of Tanks I just found. Even a tired old repop with some scratches or minor cracks would be fine. I have cash and stuff for trade. Let me know what you are looking for??

129. gemyv2001@yahoo.com message: Looking for a Harley Davidson starter gear also known as a spider gear. For a 45 servi-car transmission.

128. cyclemikel@comcast.net message: wanted indian chief fork assy 50-53 tube front end -cash and or harley parts to trade

127. softtail5@hotmail.com message: i need big loop front spring for 14-19 excelsior, and gas/oil tank for 15-18 excelsior. any thing would help. thanks curtis

126. rcassin@aol.com message: WANTED DEAD OR ALIVE HARLEY DAVIDSON WLA

125. h.lang@telus.net message: I am looking for parts for splitdorf areo magneto model # 246-C. It is for a 1928 indian 101 scout. Regards Howard Lang

124. bigyellowt@yahoo.com message: Wanted 1913 Jefferson stock frame and misc. parts ,have cash or other MC parts to trade

123. bigyellowt@yahoo.com message: Wanted NOS or good old used narrow 5-20 chain for pre 1910 Indian motorcycle.have cash or parts to trade

122. krrtrue@yahoo.com message: Wanted 1971 Super glide parts.P# 59171-71 Nameplate left (decal)
P# 59172-71 Nameplate right (decal)
P# 59553-69 reflector

121. footclutch@aol.com message: HENDERSON 1920-23 DELUXE Long Gas Tank WANTED. K MODEL will fit also. Need ORIGINAL long tank. Have cash, original short tank, and many Deluxe, KJ, Super-X, Excelsior parts to trade. Thanks, John.

120. hitzeleric@netscape.net message: Looking for a complete M5 carb for a 39 knuckle project. Have complete M74B and M5F body which I would consider in trade.

119. dkafton@clearwire.net message: WANTED:I need a Cam for 1920 Harley "J" and a seat mount for a 1912 HD. Thanks George

118. trainnut0001@sbcglobal.net message: need oil pump for a 1914 twin Indian motor.

117. fgary@adelphia.net message: CLEVELAND AND NERACAR MOTORCYCLES WANTED FOR PARTS AND RESTORATION. CLEVELAND MUFFLERS TO TRADE FOR PARTS.NERACAR HAND GRIPS TO TRADE FOR PARTS. CLEVELAND LIT, AND PARTS BOOKS WANTED PRE 1920.
THANK YOU GEORGE! CALL GARY 440-639-0858

116. a53pan@aol.com message: need S&M lamp co # 5710 with clear lens for redoing a old indian police bike

115. dbrilla@aol.com message: Wanted; 101 Scout parts. Thanks.

114. dbrilla@aol.com message: Wanted; 1933 Indian parts Chief, Scout & Four Thanks.

113. nonne2@hotmail.com message: WANTED ! Right side tank for Harley Davidson UL,ULH 41-46

Thanks George !

112. fatboy00@hickorytech.net message: LOOKING FOR NICE STRAIGHT 1955-57 PANHEAD REAR FENDER!! CALL (507)327-9911 IF YOU GOT ONE FOR SALE. THANKS!

111. **jonl@thefireplaceguy.com** message: 36 Knucklehead parts needed, REAR HEAD - GAS TANKS 507-420-1777

110. amcayouthprogram@hotmail.com message: Hi I need a three speed reverse shift drum for a Harley four speed.

109. greg@acsreps.com message: Wanted original 1939 thru 1946 knucklehead rear fender in good condition. E-mail or call Greg @ 408 202 6481

108. my46wl@yahoo.com message: Wanted, rear brake drum for 1960 panhead, HD # 41409-48A

107. omallyhd@hotmail.com message: NEEDED ASAP 3-5/8'S STOCK LENTH KNUCKLEHEAD BARRELS ANYONE WITH A SET OF FLATHEAD POWER CYL'S PLEASE CALL OMALLY 201 779 6644 OR ANY LEADS...THANKS JOHN aka. Omally
as always will also trade for needed parts for you too.....

106. dan_wadella@norampac.com message: WANTED VL SPRINGER BACK LEGS AND/OR PARTS. thanks

105. bbop@dblclickit.com message: trade 1999 corvette for kj henderson /no restored bikes

104. jcp02@cox.net message: Wanted: Inner perforated spacer and the "v' shaped spring for 29036-41A Carb Air Filter Assembly. Good condition a big plus, surface rust okay, but please no wasted out junk. E-mail scammers stay away, you will be reported. E-mail or call 619-449-8560 West coast time zone. Thanks. Jim Hansen

103. fred@fjwillert.com message: wanted1938 Harley-Davidson Speedometer and rear fender with bullit tailight Fred

102. BRAD727@AOL.COM message: 1969 R69S WANTED-PREFER one in excellent shape and close to Minnesota

101. brianapryl@verizon.net message: I am looking for a set of NOS harley pistons part # 22186-48 ( 256-48F ). These would be .030 0ver for a 48-52 EL. Thanks in advance for any help, Brian

100. ricky47@prtc.net message: looking complete linkage for tank and cluth for 1916 henderson original or repro,thank you.

99. softtail5@hotmail.com message: i need the round big spring for pre 19 excelsior, and a gas oil tank for a 15-18 excelsior. any help? i have a 19 style gas tank that needs some work the will trade for the same in the 15-18 style. thanks curtis

98. gunner1968@gmail.com message: I'm looking for a pair of original , authentic harley davidson 1960 -1961 gunsight tank logos. Anybody seen any?

CPL Royce Wagner
Delta Co. 1/160 INF.(LT)Iraq

97. *hd36ohv@yahoo.com* message: I am in need of a Knucklehead/BT Flathead rear fender. 1947 preferred but can use any year. Cash or trade. Remove * to email.

96. fred@fjwillert.com message: wanted 1938 Harley- Davidson rear fender and tailight

95. jsrestore@aol.com message: 1930 INDIAN OUTBOARD MOTOR I need an exhaust and a cylinder thanks

94. claudiojankovic@hotmail.com message: WANTED HENDERSON 1912 FOUR-CYLINDER MOTORCYCLE ENGINE IN ANY CONDITION

93. softtail5@hotmail.com message: lookinf for these x parts. the spring for the front forks, the big round one. and a gas oil tank for the 15-18. thanks curtis

92. 1qazaq@roadrunner.com message: Need an offset rear fork leg,any condition! 1qazaq@roadrunner.com

91. ricky47@prtc.net message: i need for henderson 1916, kickstarter crank pedal, rims and spokes,thank you.

90. ricky47@prtc.net message: i need for henderson 1916, kickstarter crank pedal, rims and spokes,thank you.

89. lsrezin@hotmail.com message: Hoping to find any old, black, studded mudflaps for this original paint Chief. Front and or rear. Thanks much

88. footclutch@aol.com message: HENDERSON 1918/19 MODEL H and Z: Need front fender, have rear available, transmission parts-ALL(1917-19), or complete motor. Thank you for any help. John

87. footclutch@aol.com message: EXCELSIOR SUPER-X Parts Wanted: "1928 only" aluminum muffler can, pipes, anything! Someone reproduced these before, any information, drawing to copy, helpful. Exhaust nuts(need multiple sets), toolbox/battery box bracket, generator bracket, headlight brackets(like Streamline X and KJ), foot-starter gear parts, anything! Thanks, John

86. pigstye13@aol.com message: WANTED. I need a couple of original horn buttons (or even just the chrome covers) Part # 71800-26. Fits all models 1926 to 1964. Cash or trade, ............Mutt

85. tommydeshazo@hotmail.com message: Need parts for 1975 Harley Davidson SX-175. Need 1 complete engine gasket & seal set. Need piston kit. Need magneto cover. Need seat, or foam & cover

84. jp1212pc@aol.com message: I" looking for 3" to 4" dog bone risers, stud bolts and dampeners for a 92 FXSTS(high post style only, without the pull back since I have fat bob tanks and don't think pull backs will allow for clearance.

83. evostevo2@aol.com message: Wanted-Panhead transmission and front fork for a 1952 FL. also need handshift gas tanks.

82. hd65flh@comcast.net message: Need a 49 FLH rear fender, Needs to be OEM please.

81. donvito17@comcast.net message: WANTED---1928 or 1929 Harley JD, JH, JDH "BEAM-TYPE" (Factory/Dealer Replacement) COMPLETE FRONT FORK ASSEMBLY---Also JDH Cylinder Pairs
in Excellent Condition (Carrillo or Standard 74inch JDH)---ANY HELP
GREATLY APPRECIATED---Thank You, George!---Mike (916) 962-2942

80. donvito17@comcast.net message: WANTED---1928 or 1929 Harley JD, JH, JDH "BEAM-TYPE" (Factory/Dealer Replacement) COMPLETE FRONT FORK ASSEMBLY---Also JDH Cylinder Pairs
in Excellent Condition (Carrillo or Standard 74inch JDH)---ANY HELP
GREATLY APPRECIATED---Thank You, George!---Mike (916) 962-2942

79. tnriffleman@aol.com message: I need a rear fender for my 1954 harley davidson. must be in good shap. If anybody can help please e mail me and let me know Thanks O by the way its 1954 fl

78. pigstye13@aol.com message: wanted. I need a good rear head for a 1941 Indian Sport Scout & also a good front cylinder for same. Mutt (903) 873-6644

77. softtail5@hotmail.com message: i need a 15-18 excelsior gas tank. has oil and gas spickets. can trade a 19 tank for it needs work or but out right. thanks curtis

76. jensh@surfmail.dk message: Hi
I need some new parts for my HD 1912. Is ther any firma there can help mee ?
regads Jens Hansen Denmark

75. jensh@surfmail.dk message: Hi
I need some new parts for my HD 1912. Is ther any firma there can help mee ?
regads Jens Hansen Denmark

74. kentscycles@yahoo.com message: WANTED

73. hdridingbiker@yahoo.com message: WANTED

73. hdridingbiker@yahoo.com message: WANTED

73. hdridingbiker@yahoo.com message: WANTED

72. hdridingbiker@yahoo.com message: WANTED

71. hdridingbiker@yahoo.com message: original aluminum valve rocker covers for a panhead

70. fasstJim@aol.com message: Headset casting for a 1940 or later Sport Scout frame.

69. pffp64@hotmail.com message: WANTED: FLH HEADS FOR 1963,1964,OR 1965.Outside oiler panheads.

68. campheidewald@web.de message: Looking to Buy pre 1920 unrestored or restored Motorcycle at the Oley Pa. meet if you have one for sale please email me photos to pre arange a deal. campheidewald@web.de

67. chrisginni@ohio.net message: WANTED} Looking for knucklehead 4 fin cylinders and a set of small port heads.Also need two early star hubs withthe step. Thanks Chris 216-701-6498

66. donvito17@comcast.net message: WANTED: TWO (Pair) of Harley 1928-29 JDH Standard Bore (No Over Bore) Cylinders---61 inch Reccardo Type or 74 inch Standard---Must be Excellent to NOS Condition---Any leads Greatly Appreciated!---
Thanks,George!---Mike Home Phone (916) 962-2942

65. donvito17@comcast.net message: WANTED: TWO (Pair) of Harley 1928-29 JDH Standard Bore (No Over Bore) Cylinders---61 inch Reccardo Type or 74 inch Standard---Must be Excellent to NOS Condition---Any leads Greatly Appreciated!---
Thanks,George!---Mike Home Phone (916) 962-2942

64. campheidewald@web.de message: Looking to Buy pre 1920 unrestored or restored Motorcycle Bicycle at the Oley Pa. meet if you have one for sale please email me photos to pre arange a deal. campheidewald@web.de

63. jones3cats@suddenlink.net message: We need rear brake drums for a 1964 Rand Mailster. I don't know if Westcoaster drums will fit or not. These are 8" 5 lug drums

Melissa

62. laughingindian@msn.com message: WANTED 1961 or 1962 Servi-Car Tanks. Will buy or trade

61. Blakshov@yahoo.com message: I am looking for a left replacement case for my knucklehead. My left case has cracked beyond repair. Do not want to be forced to use aftermarket cases. I have a pan left case that is NOS still needs machine work to trade.

60. hotrodndn*@comcast.net message: 41-45 BT frame,57-65 XL trumpet horn,41-46 BT tanks + speedo. Indian-25 Scout tank,36-39 Chief frame,46-48 forks,80mph Corbin. Have lots to trade. Email your trades and needs[omit*]

59. sjohnson2@sc.rr.com message: Looking for a police model generator with fan for a 1948 Panhead Model F. This was a firebike with the 2 way radio and high amp generator. Looking for the entire generator (in working condition). This generator needs to have the attached fan.

58. bobbothefist@hotmail.com message: Hello. I am looking to trade a vehicle or two, or three, or four :^) for an antique motorcycle. I have a 1935 Chevy four door half way through restoration,: a full size 1903 Oldsmobile Curved Dash Runabout replica that was built in the 50s,: a 1934 Jaguar kit car with a 1600cc VW chassis and motor and last but not least,: a 1959 Ford F100 short box pick up. Will trade one or all for the right antique/vintage motorcycle. Brand and condition does not matter too much but if you want all four in trade it will have to be a pretty nice one. I'm in Manitoba, Canada and I can email pictures of the vehicles if anyone would like. Thank you for your time in reading this ad. Have a great day, Bob

57. monukes@peoplepc.com message: WANTED- HORN MOUNTING PILLARS FOR 1929 JD. JEFF

56. monukes@peoplepc.com message: WANTED - 1940 BIG TWIN ROLLING CHASSIS OR CORRECT 1940 U or UL COMPLETE BIKE. JEFF Thanks George

55. monukes@peoplepc.com message: WANTED - 63/64 HI FI PURPLE ORIGINAL PAINT FRONT FENDER.JEFF Thanks George.

54. contanti@gmail.com message: Looking for 2 16 inch star hub wheels in good cond. prefer black hub black rim.. Consider others.

Also looking for complete rear mechanical drum brake assembly from panhead

53. plc6944@aol.com message: plc6944@aol.com message: WANTED: 1961 or 1962 FL / FLH Panhead basket case
... Must be at least 90% OEM

52. acemoto@aol.com message: Wanted Motorcycle memorabillia from 1901 till present
want dealer signs and posters , fobs, pins , pennants , motorcycle cloting
email
acemoto@aol.com

51. TLSALEEBA@COMCAST.NET message: HI, LOOKING FOR REBUILDABLE PANHEAD SPEEDOMETER AT A FAIR PRICE. FOR PANHEAD BOBBER PROJECT. LIKE 56-61, WOULD APPRECIATE ANY HELP. HAVE STAR HUBS, EARLY SHOVEL BUDDY SEAT, STUFF TO TRADE? THANKS, TOM

50. sjsudderth@yahoo.com message: I am looking for a set of 57 or 58 panhead gastanks. Must have the tebs for the emblems Thanks

49. dks**60@sbcglobal.net message: Looking for original rear brake shoes to fit 1947 45 flathead. No repros please. Remove ** from email address. Thanks George!!

48. bca.Williams4522@damailbox.com message: none

47. blakshov@yahoo.com message: Looking for u,ul or ulh parts. Completes or baskets Cases,Frames, springers, Fenders and etc. Thanks

46. mariobuerger@gmx.de message: hello.i'm looking for a original intake manifold for harley-davidson 1915.thanks,mario

45. bigyellowt@yahoo.com message: Looking to Buy pre 1916 Motorcycle at the Oley Pa. meet if you have one for sale please email me photos to pre arange a deal there my cell # is 530 305 6979

44. bbop@dblclickit.com message: wanted 1940 servi car cases .matching numbers ex.case number only. 41g 52g 56g cases for trade. thanks

43. plefe@hotmail.com message: Looking for clean Electra-Glide front fender with all the trim for 1976 FLH. Bumper not necessary but will accept. Thanks George!

42. compeau_12@hotmail.com message: Looking for a blown-up or non-runnig 883 or 1200 sportster motor.

41. info@bareboneschopper.net message: parts and or complete 1963 harley servi car.

40. bigyellowt@yahoo.com message: Still looking to buy anything 1913 Waverly,Jefferson,PEM like a frame,fork,handle bars,fenders,oil tank ect. have cash or rare MC parts to trade call 530 305 6979

39. fatback.custom@gmail.com message: Interested in early v-twin engine. Any manufacturer considered. Pre-war.

38. chrisginni@ohio.net message: Wanted' Looking for two early star hubs with the step and a early kucklehead smoothe cam cover.Also looking for a big twin springer rear leg. Thanks Chris 216-701-6498

37. harleyaug@excite.com message: wanted 1971 boat tail fender seat tail light assembly for superglide

36. harleyaug@excite.com message: wanted 1971 boat tail fender seat tail light assembly

35. dzuber1633@aol.com message: 1956 Panhead cases wanted. Preferably matched cases. Must have original VIN and come with bill of sale or title. Will consider complete motor. I have 39 UL matched cases if interested in partial trade. Thanks George

34. survivalcycle@yahoo.com message: WANTED: Running Big Twin Flathead Motor U-UL-ULH Any Year 74 OR 80 CU.IN.Please contact Jim at survivalcycle@yahoo.com or please call 520-432-6993 I am Located in Bisbee Arizona Thanks Jim

33. waloo321@yahoo.com message: Looking for a 1957 straightleg frame.

Thanks, George.

32. pigstye13@aol.com message: wanted. I need a good rear head for a 1941 Indian Sport Scout & also a good front cylinder for same. Mutt (903) 873-6644

31. bigyellowt@yahoo.com message: Looking to buy pre 1916 Motorcycle's and parts, like frames,motors,sheet metal,wheels,ect. any make,any cond.,any amount, can meet at the Oley Pa. meet or will pick up at your place anywere in the U.S.

30. kim6723@aol.com message: HELP!!! Wanted for 35 original paint VL - parking lamps, speedo cable, any nice patina parts,accessories. Have much to trade Thank You Kim

29. shuvl427@comcast.net message: Help still in need of 36/37 baby food jar tops i need 3 OEM parts only. i would like to finish my engine also in need of 8 long shank lug nuts the ones that are drilled for safty wire so i can put it on wheels please HELP by looking thru your parts stashes can trade or buy thanks

28. jrklover@hotmail.com message: WANTED: I need an original 1938 Harley "skull" dash, or just the cover would be fine, I also need a ignition/key switch cover assembly for the same dash. Thanks for the use of this forum!

27. vennepaul@gmail.com message: Still interested: All parts for 1912-24 Excelsior motorcycles. I have projects for 1913-15 and other years may apply. Thanks George, Paul V Los Angeles

26. wacopsc@aol.com message: looking for a XR-750 frame, forks and alloy tank
Call anytime regards Paul 617 834-9354

25. wacopsc@aol.com message: looking for a XR 750 frame and forks best regards Paul

24. scootershak@midconetwork.com message: I'm looking for a set a gas tanks for a panhead 1951-1954 with the hand shift. not new. you can e-mail or call Ross at The Scooter Shak
(701)667-2033

23. mscottharley@sasktel.net??? message: WANTED-34-39 HARLEY 45 FRONT FENDER ANY CONDITION...OR JUST THE BRACES.CASH OR TRADE.REMOVE ??? FROM EMAIL.

22. kim6723@aol.com message: HELP WANTED--- Hello 1912 hd single fans, need fenders & belt tensioner lever + small parts. Need small pieces left over from restorations. Thank You Very Much. Have pre 15 hd parts to trade & some KJ pieces also !!!

21. a1937ws@hotmail.com message: WANTED TOOLBOX # 3452-35A , HAVE A VERY NICE TOOLBOX 3452-35 TO TRADE.

20. greg@acsreps.com message: Wanted: I'm looking to buy a 1939 Harley Knucklehead Frame.
Please e-mail or Call 408 202-6481
Thanks
Greg

19. rboykeps@yahoo.com message: i am looking for Harley Davidson Ultra 90th anniversary Tachometer.
please, email me.. thanks

18. Blakshov@yahoo.com message: need some 40 spoke borrani 18 and 21 inch shouldred rims.Have cash

17. Blakshov@yahoo.com message: Cash paid for a 2.75x21 avon speedmaster front tires. Any condition

16. Blakshov@yahoo.com message: Cash paid for a 2.75x21 avon speedmaster front tires. Ay condition

15. rmcrh@shaw.ca message: wanted short flanders risers for springer

14. ulfhd@gmx.net message: i need fore a 1914 hd twin parts like fender,fork cainguard,i have hd parts fore trade.thanks george.

13. tobruk@mail.ru message: Hi, I am Slava from Russia. I wanted model XS 42 with sidecar`s drive wheel. Did you see this motorcycle anytime? Can you help me? I am ready to pay for good restored HD XS 42 50 000 $ and more.
Any ideas?
Please, contact me.
Sincerely yours,
Slava.

13. tobruk@mail.ru message: Hi, I am Slava from Russia. I wanted model XS 42 with sidecar`s drive wheel. Did you see this motorcycle anytime? Can you help me? I am ready to pay for good restored HD XS 42 50 000 $ and more.
Any ideas?
Please, contact me.
Sincerely yours,
Slava.

12. nicolaischweiz@ebmnet.ch message: WANTED INDIAN Bobber '36 Original stuff restored or unrestored if you have and want to sale let me know Gracias

11. hogluvr1340@yahoo.com message: WANTED:

1940 W, WL flathead 45" engine cases, have cash or will trade a nice set of 1947 WL cases.

Thanks George!!

10. yorgtat@hotmail.com message: STILL LOOKING FOR A HAND TO FOOT SHIFT CONVERSION.....B&H OR THORO.... IDEALY CONPLETE.....ALSO THE ANGLED/INVERTED RISERS......PLEASE EMAIL IF YOU HAVE ANYTHING OF THESE....THANK YOU........

9. kim6723@aol.com message: WANTED - Original paint motorcycles, all makes, all years, private collector wanting one or collections Thank You Kim 513-407-2575

8. ttboy1962@hotmail.com message: Wanted Knucklehead, not a shiny restoration but in one piece and running. What have you got? Ian ttboy1962@hotmail.com

7. heinhobb1@aol.com message: Spring fork J 1927. Have a J-Model from 1927 in restauration and found out, that the front part of springer has brackets for the smaller earlier fender. So I´m looking for that springer fork (only front part) that will fit for the later wider fender 1926 up.
Would appreciate any help.

6. hogluvr1340@yahoo.com message: WANTED: Battery box for Harley 45" Solo. Thanks George!!

5. chrisginni@ohio.net message: Looking for a early right side knucklehead motor case and a set of small port heads. Thanks Chris 326-701-6498

4. thelooseendsband*@gmail.com message: Wanted: old unuseable, crushed, rusted out Harley 45 oil tanks....call me 417-276-9908, or email: thelooseendsband*@gmail.com (take out the *) Thanks!!!

3. sylvain.lebart@wanadoo.fr message: Harley Davidson 1930' VL fork.

2. nomadman1956@sprintpcs.com message: wanted 1934 harley vld, jugs, heads, fenders, brake hubs and drums, shifter, pedals, seat post and many other misc. items
let me know what you have for sale

1. yorgtat@hotmail.com message: LOOKING FOR A SET OF 40`S ANGLED RISERS,HELLINGS AND STELLING,FLANDERS......PLEASE MAIL ME IF YOU HAVE A SET YOU WANT TO SELL.....THANK YOU.........

January 2008

153. ggleason@twcny.rr.com message: FOR SALE ALL MUST GO 71 Huskie 360 enduro right shift, 87 1/2 Cagiva 650Elephant Paris D'car model 2500 miles orig, (2)Hodaka combat wombat and parts,75Hodaka Road Toad 100cc enduro,75hodaka 125 enduro,80 Montessa cota trials bike 350,74 Indian 100cc Made in china. Everything and more parts fron the 70's call me. My name is Kurt 315-682-8635

152. obsurfer67@yahoo.com message: looking for 1947 Mass. motorcycle plate. any leads appreciated

151. chuck4t@aol.com message: Looking for a 1959 Duo-Glide as original as iI can find~! Thanks

146. lsrezin@hotmail.com message: Looking for an original set of "Roadmaster" scripts for a Chief fender. Any condition .

145. sourgrapes@att.com message: I like how peolple write on here and do not identify them as who they are My ad has my phone number and I will answer any questions anyone has for me it is 559-977-5998 and it is in the listing as well. the person that wrote this has not the curage to call. I think I know whom it is and they are over sour grapes as they did not have any cash to buy a bike recently they knew where was for the last thirty years and I purchased it after it went into the amca magazine.
.

144. shuvljenny69@live.com message: *shuvljenny69@live.com: WARNING! 8 Valve Indian Track Racer on e-Bay motors. Item # 200205617280.
This bike is a FAKE!
Original paint frame but motor has a Lange repop top end.
Advertised as Honest Injun factory rocket but isa Non Genuine bike built up fake up
Seller ebay handle - cleveland4cylinder
aka Patrick James out of Fresno
bike an Seller well known in SoCal - beware!

143. llwauto@aol.com message: wanted 1920-29 indian scout flywheel assembly compleat with rods and shafts 45inch or 37 inch webed wheels. all so 31-33 harley vl left number side case with good numbers.

142. lbhill1@verizon.net message: 6"air cleaner&backing plate for linkert carb. Saddlebags for 1940 ULH.

141. redfernmotorparts@bigpond.com message: 1917 Harley-Davidson JD model outer primary cover ( front chain guard ) needed. If you can help please e me at redfernmotorparts@bigpond.com Thank you and thank you George.

140. jjeno2@yahoo.com message: Bosch ZEV for JD Model F Rebuildable OK
Also need Magneto cases ,,,,,Have Generator and cases to trade or $$$
Tahnks
Jeno

139. donvito17@comcast.net message: WANTED: 1938 or 1939 INDIAN CHIEF OR FOUR In Original, Restored, Good
Running Condition---Must be a Matching Numbers Bike---No RePop Parts
---E-Mail Photos & Price--- Thank You!---Mike (916) 962-2942
E-Mail donvito17@comcast.net

138. pine@phreego.com message: Hello looking for Maryland 1941 and 1957 motorcycle tags.thanks. jeff email - pine@phreego.com

137. 37wldr@gmail.com message: Need a 43 to early 46 Knucklehead 29deg frame. Must be really good. Top $$ paid for the frame if it is what I want..Also willing to trade..What do you need??..THANKS..Rob, NORTHERN THUNDER CLASSICS...email 37wldr@gmail.com

136. buana55@hotmail.com message: Hello
I am looking for a harley 1966 sidecar for police service. Please say 1966 sidecar in subject area.
Thanks in advance

135. vista333@hotmail.com message: Wanted kicker side bubble bag lid

134. info@utw-gmbh.com message: looking for Harley tandem seat parts, not buddy seat, any condition.
thanks, George

133. chrisginni@ohio.net message: Looking for a early Knucklehead Righ side engine case and early EL wheels and rods. Thanks Chris. Cell 216-701-6498

132. 15hedstrom@tpg.com.au message: WANTED: NEW CRANKPIN FOR 1915 BIG TWIN HEDSTROM INDIAN

131. col.wright@bsa.qld.gov.au message: Harley J model 1924 or 1925 heel brake pedal wanted to complete well advanced restoration. If you can help please email me

130. flathead@sol.dk message: WANTED!!!! 1937 or 1938 Knucklehead project or only the engine.
Please mail pix and price.

129. bigyellowt@yahoo.com message: $$Cash today!$$ for old Motorcycles,any brand,pre 1916, street or race bikes,single or twins,belt or chain drive,also parts wanted like motors,frames,forks,handle bars,wheels,gas tanks,fenders,ect. email me photos and prices if possible ?

128. fbac@family-net.net message: WANTED: Mid 30's (34-36) seat "T" bar for Harley RL.
This one has no bushing in the pivot and a single
saddle post pin..
Thanks George..

127. warfield@mo-net.com message: looking for in fair to good shape set of harley shovelhead cases(motor block) 1966-68 with title to buy or would trade 1970 shovel cases(nose cone)matching belly numbers in good shape.thanks 417 846 0471.thanks

126. michaelcbr1@yahoo.com message: 2-stroke Harley part bikes or parts. I am a disabled vet and want to build a few amf bikes for cheap. Thank you for your time. please call 570-292-0162 or michaelcbr1@yahoo.com with any info you may have.

125. jbdaneconst@hotmail.com message: looking for 1975&1976 xlh parts frontal crash

124. donvito17@comcast.net message: WANTED: 1901 to 1908 California Or Yale-California Motorcycle
(Motor-Bike)---Any Leads Greatly Appreciated!---Thank You, George!---
Mike, (916) 962-2942

123. ga.vandal@yahoo.com message: I need to find an oem inline or offset springer rear leg. 1 in. stem stock length

122. blakshov@yahoo.com message: Need some help finding a 2.75 x 21 avon speedmaster. someone has to have one to sell

121. info@tempestcycles.com message: looking for early 1900's motor and tranny. prefer single cyl. and unusual brand. need to be able to put back in working order if not running.

120. indianchoutracer@yahoo.se message: Wanted: 42 degree "Baby-Bosch" magneto.

119. thelooseendsband*@gmail.com message: WANTED: INFORMATION: I have a Harley intake manifold, casting number 428-35...it's for a 3-bolt, small dia. linkert, has a straight inlet to the cylinders (T) shaped like a Pan intake), and has a slight goosneck bend between the carb mount and the nipple mounts...it also looks like a B and a 3 stamped into the flat part of the carb mount on the outside edge. Any help is appreciated....I suspect a '27-'29 D model twin? (take the * out of the email address) Thanks, Gerald

118. valron@atlanticbb.net message: WANTED: LOOKIN' FOR A GOOD USED HARLEY SIDECAR. '58-'67 STYLE WITH JUICE BRAKE AND METAL BODY. EVEN JUST GOOD FRAME OR CHASSIS. PLEASE SEND PIX AND ASKIN' PRICE. I'M LOCATED IN WESTERN PA. E-MAIL OR PHONE 1-814-749-8070. THANKS, RON.

117. wcbishop@bellsouth.net message: Wanted: A left side Harley Davidson 47-50 fuel tank emblem. Thanks for your consideration. wcbishop(@)bellsouth.net Remove () for e-mail

116. flatsidejohnny@hotmail.com message: please I need a rt. side case half to fit a 58 panhead I think 58-62 will work. please let me know what you have I can swap if you need something I also have plenty of early 48-52 rt. case halfs to swap. thanks Omally 201 779 6644 thanks George see you all at the swaps please stop by and say hello will be at oley and surounding areas of amca meets many motor also to buld for sale omallyhd dotcom

115. dandgweiss@gmail.com message: Looking for Bosch magdyno for Indian.

114. hitzeleric@netscape.net message: Looking for a pair of 36-39 four fin cylinders for 39 Knuckle. Also interested in any other original 39 knuck parts! Thanks George

113. flathead@sol.dk message: WANTED!!!! 1937 or 1938 Knucklehead project or only the engine.
Please mail pix and price.


112. cmanz56@yahoo.com message: I need a front end, front and back fenders, gas tanks and a transmission for a 1928 Harley JD.

I also need original 1927 and 1928 California license plates for Harley JD's.

I am looking for a basket case for a 1936 VLH.

I am looking for a basket case for a 1912 Harley

Thanks.

111. eb@patrimoinescontacts.com message: Search a 1918 Harley gearcase cover (model with oil pump inside) maybe you have one to sell ?
Thanks for respons
Regards

110. mcintosh95482@yahoo.com message: need generator right case pan\shv
any yr tell me what you have
keith

109. henderson@c.dk message: Henderson 1918 - 1919: crankcase and other parts.

108. lj2615@hotmail.com message: Looking for a M35 linkert carb for my 1947 El.

107. bnerstrom@yahoo.com message: Looking for an older runner (HD, Indian, other?) does not have to be original or good looking. 20's-40's are the years that I am looking for. Don't want a restoration - just a beater for the right price. Please feel free to email me with that hunk of junk in the corner. I'm in Chicago but can travel or arrange shipping.
Brett
bnerstrom@yahoo.com

Thanks everyone.

106. chuckthornton@mac.com message: WANTED: A Harley-Davidson (Super) Deluxe Buddy Seat with hand rails in Red & White for a 1965 FLH. I would like this seat to be in near perfect condition. Thanks!

105. djlamb511@aol.com message: I need a 1938 knucklehead rear rocker box cover. Thanks Jeremy

104. blakshov@yahoo.com message: I want to find 2.75x21 avon speedmasters cash paid thanks

103. thtileworks@mwt.net message: Need to find some parts for a 45" flathead front wheel, as follows:
Brake cam and actuating lever, set of brake shoes, and the bracket or fixture to attach the brake drum to the springer. Thanks, Andy

102. damonpf@msn.com message: Wanted 1900-1930 American Motorcycles Top Dollar Paid in 48 Hours. No Collection to small or large. We also buy Pre 1920 Motorcycle Parts and Motors. Damon 614 206 6575 or damonpf@msn.com

101. shuvl427@comcast.net message: help please still need 3 tops for the baby food jars on a 36/37 knucklehead these are the valva spring cup lids some one should have something please would like oem only as the repops dont fit look thru your parts stashes also need 8 of the long head long shank drilled for safty wire wheel lug nuts thanks

100. bigestuna@aol.com message: need 45 solo or later servicar seat pan,,,,

99. bigestuna@aol.com message: 1939 harley deluxe solo seat bridle rosetta. its 1 7/8" round, nickel plated with a 1" glass center with roses painted on this glass center. $200 cash money!!! have a set for glass jewels for a 1940 harley deluxe seat, i would trade for the above.

98. brad.roadpirate@hotmail.com message: Looking for rear frame section and rear end for a servi car- '65 and up. To be mated to a evo rigded frame.

97. anothertsc@yahoo.com message: Seeking info relating to a 1941 HD Knucklhead I owned while in the Marine Corps in the mid to late 70's. I know it ended in Syracuse, NY in 1977. Chopped at the time I sold it to a different person, it had an 18 over springer, railroad light for a brake light and was a metallic magenta/purple in color. I have a vin number. I am also seeking a moderately priced Indian Chief in running condition. I reside in Knoxville, TN. thx

96. damonpf@msn.com message: 1910-1914 Harley Motor cases or parts or even the whole bikes. I’m restoring an old 1910 need to find a good set of cases and other parts. Thanks Damon 614 206 6575

95. monukes@peoplepc.com message: Searching for an original 65 FLH rear fender, and dual exhaust pipes. Please send price and pic. Still looking for a late 30s servicar right fender. THANKS

94. bigyellowt@yahoo.com message: Wanted for 1912 Emblem , twin manifold,pipes,muffler,rear wheel V belt pulley brackets also need for 1909 Thor single, a set of fenders

93. ebourrague@wanadoo.fr message: Hell all
I search a 1918 gearcase cover (model with oil pump inside) maybe you have one to sell ?
Thanks for respons
Regards

92. pan54dd@aol.com message: Searching for a female connecting rod ZA-705, with no window, please send pictures if available, thanks for any help....Dave

91. domr@shaw.ca message: WANTED any information on a 1909 THOR, I have a complete running motor, need frame /chassis and literature or pictures please! domr@shaw.ca

90. domr@shaw.ca message: 1911-1914 Indian Hedstrom hendee twin motor required, cases, engine parts anything engine related. Name your price with the parts list. domr@shaw.ca

89. vennepaul@gmail.com message: Wanted for my 1914 Excelsior 2 speed restoration: I need at least 3' of obsolete 520 chain with the thin side plates. Modern 520 chain is too wide and jams. Anyone got some? Used is OK. Thanks George, Paul V in Los Angeles

88. flovikholm@hotmail.com message: 27 Chief. Looking for a frame and fenders.

87. panhead50@rogers.com message: 3speed/reverse trany or case to fit a 1969 FL.THANKS 613-741-3618

86. beth-casey@mindspring.com message: I'm restoring a '34 VD Looking for a good set of fenders and tanks. I have early 30-33 fenders for possible trade. Also looking for a set of speedster bars and shifter linkage from tank to transmission and any other VD VL VLH parts you may have. Battery box and cover too. Thanks in advance! Casey

85. dgmagnum@hotmail.com message: Looking for a light mast to fit a 1972 police servi-car.Need mast and brackets to mount.

84. blakshov@yahoo.com message: I am looking for some borrani/akront, jones or dunlop rims in 18,19and 21 in. 40 holes. Also I would like to find a avon 2.75x21 speedmaster. Blakshov@yahoo.com

83. jonnyonwheels@yahoo.com message: SERVI-CAR AXLE WANTED for trike project. I'm a 26yr old paraplegic looking to get back on my bike once it's a trike. Please let me know what you've got. Thanks.

82. jtchuk@telusplanet.net message: Restoring a 1934 VL looking for primary cover as well as shifter with gate and linkage and any other 34 parts

81. jafaq69@hotmial.com message: I am looking for a starter kit for a 1958 panhead.

80. harrysbikes@yahoo.com message: 1912 Harley Davidson needs rear shiv pulley for clutch type rear hub. Also fenders and muffler. Any help appreciated. Email me at harrysbikes@yahoo.com or call 920-758-2309

79. fastboyhd @ bellsouth.net message: i need a number side engine case for 41-47 knucklehead. does not need to have good numbers as i have a partial case with good numbers and title that is a 46 FL. i prefer one that needs nothing else but will take what i can get. prefer 46 though. leave out the spaces to email me or call 615--830--5802. thank you george. great site

78. mph3000@aol.com message: need 1911 to 1914 harley vtwin engine parts. can be totally broken, rusted badly , unusable ect. will trade for hd 1910 single parts if needed or pay cash.

thanks george

77. c urtva@mchsi.com message: Looking for a front fender for a 42WLA. Would consider original or reproduction fender.

76. oldeharley@aol.com message: Please help.

Desparately need 1912 HD rear hub. New original or parts. Name your price.
Best regards,

John cell # 610-715-9511

75. obion_county_man@yahoo.com message: In need of the front rim and all parts with it for a 1977 electra glide 16 inch in good shape no rust please thats whats wrong with the one i have email me with it if you got it

74. info@trinitymotorworks.com message: In ad for Indian Model O gas tank contact phone number is 570-460-8123, www.trinitymotorworks.com

73. info@trinitymotorworks.com message: Wanted: Original gas tank Indian Model O. Have Indian Parts for trade or cash. Original bike so looking for an original tank. Nice, rusty, crusty, whatever you may have. I have been told it is the same as the 13-16 Indian tanks (if you know otherwise let me know).

72. dkafton@clearwire.net message: WANTED: Handlebars and rear stand for 1912 H-D single. Original or reproduction are OK. Thanks, Dave

71. rustyscooters@hotmail.com message: I NEED A WICO XV1922. WILLING TO PAY WHAT IT IS WORTH OR I HAVE LOTS OF KNUCKLE AND PAN PARTS TO TRADE. THANKS FOR ANY HELP.

70. blakshov@yahoo.com message: I am looking for borrani 40 hole aluminum rims in 18, 19 or 21. thanks for any help

69. rk112785@aol.com message: Hello, i am looking for an origianl 1930 Indian Horn cover

68. jessejames_gtx@yahoo.com message: I am looking for an original paint peacock blue, 2 light dash cover. Must be straight but paint in any condition. For a 49 pan.
Thanks 1-330-853-6910.

67. kevparker@aol.com message: Wanted: Akront shouldered style aluminum rim. 40 hole to fit a 5.00 x 16 inch tire for a Harley Davidson. Thanks!

66. no1rides@yahoo.com message: I am looking for a Harley bullneck frame (second version with spark control tab on left down tube) for my '47 EL project. Prefer ready to build condition, but will consider all.

Thanks, Jon

65. stevemontagna@comcast.net message: Wanted, 1915 Indian rear wheel, clutch and primary cover. Prefer rusty and crusty, but useable, for an original unrestored bike. email or call 413 204-6179 (Thanks George)

64. dlvanommen@gmail.com message: WANTED-UL Harley 80cu. Thirteen Fin front cyl in a repairable cond its ok ill sleev it please call 626 332-4056 ask for Danny sr.

63. satanherself @gmail.com message: SERVICAR Rear wanted have NOS Wassel Banana Tank and Excellent 16" Round spoke 9 6 spoke ) rear Wheel to trade.. PA/NJ area

62. burnsy@kc.rr.com message: I have an indian mini mini from 1975. Ineed a condenser and a coil for it. I would buy an entire bike if anyone has one

61. blakshov@yahoo.com message: I am looking for 18.19 and 21 in. borrani rims any condition. Please contact me if you ahve any

60. claytonrestall@hotmail.com message: Wanted: Harley 3 speed with reverse trans for Big Twin. Prefer 1937 to 1940. Thanks, Clay.

59. claytonrestall@hotmail.com message: Wanted: Harley 3 speed with reverse trans for Big Twin. Prefer 1937 to 1940. Thanks, Clay.

58. claytonrestall@hotmail.com message: Wanted: Harley 3 speed with reverse trans for Big Twin. Prefer 1937 to 1940. Thanks, Clay.

57. shuvl427@comcast.net message: Please help I still need 3 oem baby food jar lids (36/37)knucklehead valve spring covers. so I can finish my 36 el please look thru your piles to see if you can help. also would like 9 more of the long head long shank drilled wheel lug bolts. there has to be some of this stuff out there no repops thanks

56. knuck39@yahoo.com message: Need 4 fin front knucklehead cylinder...something that needs to be sleeved is totaly fine,as that is the case with the one rear I have...good fins would be a plus...but will consider any/all...cash,or trade.all leads appreciated..knuck39@yahoo.com

55. fred@fjwillert.com message: rear fender with round tailight fo 1938 WLD Fred fred@fjwillert.com 619-520-1394

54. claytonrestall@hotmail.com message: WANTED: original only for 1939 Harley U BT flathead: toolbox, oil tank, speedo, footboards, tail light, & aircleaner. Also need parts for 1937 BT side car. Have original 37 only knuck / BT oil tank to trade, complete/dip stick and all lines & fittings. Excellent condition. Also have an original tombstone tail light for trade.

53. claytonrestall@hotmail.com message: WANTED: original only for 1939 Harley U BT flathead: toolbox, oil tank, speedo, footboards, tail light, & aircleaner. Also need parts for 1937 BT side car. Have original 37 only knuck / BT oil tank to trade, complete/dip stick and all lines & fittings. Excellent condition. Also have an original tombstone tail light for trade.

52. claytonrestall@hotmail.com message: WANTED: original only for 1939 Harley U BT flathead: toolbox, oil tank, speedo, footboards, tail light, & aircleaner. Also need parts for 1937 BT side car. Have original 37 only knuck / BT oil tank to trade, complete/dip stick and all lines & fittings. Excellent condition. Also have an original tombstone tail light for trade.

51. bird_boy_5@yahoo.com.au message: 1925 fe frame tank forks all tin wear

50. bigyellowt@yahoo.com message: Looking to Buy ! A odd pre 1916 orig. paint Am. twin belt or chain drive or whole barn load of pre 16 bikes and parts email photo and price if possible ?

49. allsure@bigpond.net.au message: WARNING.WARNING.WARNING. BEWARE OF THIS MAN...
In March 2007 I bought and paid for a magneto from Martin Warther
6424 Peach Street Louisville OH.330 875 5547.He is just a common thief and will not send me the magneto or the money and won't answer my emails or the telephone.Does anyone know this man? I am prepared to pay expenses for anyone who will find him and knock on his door for me! Regards from Australia and thanks. Ian Donaldson.

48. union.jack@wxs.nl message: Looking for wl'41 cases, with bill of sale or title. Must be shipped to Holland. Martin

47. nanuk63@centrum.cz message: Looking for H-D Police in original status or restored, only in perfect visual and technical condition.

46. mcmanumj@mailbox.sc.edu message: Looking for a North or South Carolina 1941 and 1947 motorcycle license plates. Must be in restorable condition. Please send pictures and price to mcmanumj@mailbox.sc.edu Thanks, Matt

45. fbac@family-net.net message: WANTED: Center brake rear end for early (32-36) harley servi car.
Also: L.H. Gas/Oil tank for Harley RL 32-36, also complete dash unit for same.

44. vennepaul@gmail.com message: Wanted: 1913 Indian twin gas tank or parts, any condition. Also need a bare fork, racing handlebars and linkage for racer application. Need tank side oil pump for racer. Thanks George. Paul Los Angeles

43. vennepaul@gmail.com message: Wanted: 1912-14 Excelsior 61 cu. in. V twin engine, all or parts, original paint gas tank and fittings for same, racing fork and handlebar or specific information on the fork to convert a stock one, also Messenger leaf spring seat or parts. Info on Messenger racing seats 1914. Thanks George, Paul in Los Angeles

42. fatdog1903@yahoo.com message: Looking for Harley-Davidson intermediate worm gear for 1915-1918 Singles This is the gear that runs the oil pump, but is different than the twins. Part number is DA872. Also looking for 1914 Harley parts, what do you have?

41. speedmann@freesurf.ch message: I search a 46 knuckle-frame. Cash or trade with other harley stuff . email speedmann"ed" freesurf.ch
thanks

40. donvito17@comcast.net message: WANTED: 1936 to 1939 INDIAN CHIEF or INDIAN FOUR CYLINDER---Original Or Restored---Any & All Leads Greatly Appreciated---Thanks, George!
---Call Mike At--- (916) 962-2942

Also, Any Pre 1916 American Motorcycles Or Parts

39. retiredsfcroy@yahoo.com message: Looking for 1936 Indian ignition for a magnito Must have "M" on reverse side or info on if anyone is making them. Thanks

38. rayfast@aol.com message: 61 sportster oval plastic gas tank emblems.Thank you..

37. flovikholm@hotmail.com message: Wanted: Frame and rear fender for 27 Chief.

36. cffrey@mindspring.com message: 74" Knuckle manifold.
Spigots are about 3.6" apart.
Thanks
Charlie
cffrey@mindspring.com

35. bigyellowt@yahoo.com message: Wanted a 1908 Thor or Indian twin motor,1912 Emblem twin manifold and rear V belt pulley braces that mount to rear rim,1912 Harley handle bars,rear stand, (2)28 x 2 1/2in. rim's 1913 Jefferson frame,set of rat trap pedals,1909 to 1912 Indian rear fender or at least the back half,going on a racer, orig.red 48 panhead right gas tank,have very nice 51 pan right tank for trade.email photo and price if possible ?

34. fatdog1903@yahoo.com message: Looking for Harley-Davidson intermediate worm gear for 1915-1918 Singles This is the gear that runs the oil pump, but is different than the twins. Part number is DA872. Also looking for 1914 Harley parts, what do you have?

33. platinumtp@yahoo.com message: WANTED: Harley 1951- 1963 Police Special. Running or Not. Restored or Not.

32. jcp02@cox.net message: WANTED: Beehive tail light reds lens P/N 68090-39. NOS or as close to NOS as possible. I broke my customer's and I need to replace it. Help guys! Call 619-449-8560 05 619-933-1760 or e-mail with what you have with asking price and shipping to 92071. Thanks in advance.
Jim Hansen

31. vennepaul@gmail.com message: Want nice original paint gas tank for 1912-14 Excelsior twin. Thanks George. Paul in LA

30. wacopsc@aol.com message: Wanted trike frame or partial 45 frame(front to seatpost)
regards Paul

29. itzig1@web.de message: Searching pierce 4 engine also carb and mag.
thanks erik

28. OLDVTWIN1@COMCAST.NET message: NEED PARTS FOR 1918 HARLEY TWIN . HAVE DRIVE DRAIN BUT NEED FRAME FENDERS, HUBS AND LOTS OTHER STUFF, PLEASE LET ME KNOW WHAT YOU HAVE THANKS 248 343 4686

27. oldvtwin1@comcast.net message: NEED PARTS FOR 1918 HARLEY TWIN . HAVE DRIVE DRAIN BUT NEED FRAME FENDERS, HUBS AND LOTS OTHER STUFF, PLEASE LET ME KNOW WHAT YOU HAVE THANKS 248 343 4686

26. blakshov@yahoo.com message: Any one got a 2.75 x 21 avon speedmaster? I have cash thanks for any help

25. blakshov@yahoo.com message: Any one got a 2.75 x 21 avon speedmaster? I have cash thanks for any help

24. steidclan@hotmail.com message: Need "sargeant stripes" for '49 rear fender. Thanks! Mike

23. ironhead10134@aol.com message: Need oem cylinder for 67 shoveltop part #16484-66 Please e-mail me if you can help.

22. donvito17@comcast.net message: WANTED: 1910 Racycle Frame,Forks,Handlebars & Any Other Original Parts
---Want to build a complete bike from my Original 1910 Engine---
Mike (916) 962-2942 ---Thanks, George!

21. flathead@sol.dk message: WANTED!!!! 1937,1938 or 1939 Knucklehead engine.
Please mail pix and price.

20. flathead@sol.dk message: WANTED!!!! 1937,1938 or 1939 Knucklehead engine.
Please mail pix and price.

19. henderson@c.dk message: Ner A Car motorcycle i am interested in ALL.

18. henderson@c.dk message: Absolut ALL parts for Ner A Car Wanted!!!!
Buy or trade with other American parts.

17. mscottharley???@sasktel.net message: WANTED- HARLEY 34-39 45"(WL)FRONT FENDER OR FENDER BRACES.CASH OR TRADE.
REMOVE ??? FROM EMAIL.THANKS

16. bobsbikes51@verizon.net message: I want a hardtail custom frame for my harley 45 motor ,call 1-661-723-7555 have money or parts to trade THANKS for any help i can get, bob

15. dawkins_08322@yahoo.com message: I am looking for a rear shovelhead head for my 1975 shovelhead. The front head is a 1975 and I am trying to match it as close as possible. If anyone has a nice one available for sale, please let me know. Thanks. South Jersey Eddie

14. duggy@cybernex.net message: mustang mc / cushman eagle with or without motor

13. chrisginni@ohio.net message: Looking for speedo or speedo part for 1941 to 1947. I will take parts or a whole speedo.Cash or I have harley parts to trade. Thanks Chris 216-701-6498

12. otlawpan@verizon.net message: WANTED, Right side case for 1953 Panhead, must be in good condition w/o cracks or unrepairable damage, pictures a must.

11. blakshov@yahoo.com message: Hello I would like to find an early avon 2.75x21 tire any condition or an racing buggy 22 or23 in narrow rim and tire like in the early choppers magazine. Please send a email to blakshov@yahoo.com if you have anything

10. info@trinitymotorworks.com message: WANTED: Pre 1932 Indian Four Cylinder. Looking for an original. But consider all bikes. Cash waiting.
570-460-8123
Thanks
George

9. hogluvr@att.net message: WANTED: Harley 32E generator in rebuildable shape.

8. hogluvr@att.net message: 1940 WL engine cases WANTED, will pay cash or trade a nice set of 1947 WL cases.

7. barrygipe@hotmail.com message: need cam cover & sprocket cover for 1965 xlh sporster.

6. sfarrell@epix.net message: Wanted 1942 Wla Military Bike and 1940's Knucklehead Thanks Scott

5. DPATCH2@KC.RR.COM message: WANTED RIGHT SIDE CASE FOR A 41-46 KNUCKLEHEAD DAN 913 515 3721 913268 5314

4. rcullen@gotadsl.co.uk message: I'm looking for parts for 1922-28 Henderson DeLux. Specifically Front & rear hubs ,Handlebar grips, correct carb, Battery Carrier, Rear stand, Gearbox internals - in fact interested in any parts .
Also can anyone tell me correct color for a 1925 Model ??
Thank you

3. evostevo2@aol.com message: Wanted-1952 Panhead engine case, Number case or whole bottom end.

2. JOHNCAMP@INDY.RR.COM message: WANTED A TOW BAR FOR A 48 SEVICAR

1. johncamp@indy.rr.com message: WANT A SEVICAR TOW BAT FOR A 48

November 2007

133. emer974@msn.com message: Wanted to buy 1937 Knuckle heads any condition or trade for nice set of 1938 heads.

132. fbac@family-net.net message: WANTED: L.H. Differential housing to fit 32-36 servi-car.
Part No. 7135-32
Thanks George..

131. hickswd@bellsouth.net message: Looking to buy 65 - 69 Big Twin Cases, must have good, clean unaltered VIN #'s and be in good, useable condition. Will consider partial or complete engines as well, but must be 65 - 69 HD cases. Title is a plus but not required. Looking for good cases at a fair price & can pay ASAP. Please email if you have something. or call 770-236-0806

130. mph3000@aol.com message: need basket case pre 1915 harley v-twin engine.can be totally broken, rusted, no fins ect.will pay cash or trade for 1910 hd single parts.
also need an engine for a 1977/78 hd 250mx two stroke.
thanks

129. fbac@family-net.net message: Wanted:
LH Gas/Oil tank for 32-36 45 Harley R-RL.
Also footclutch for same.
Don
fbac@family-net.net

128. monukes@peoplepc.com message: LOOKING RIGHT SIDE FENDER OFFLATE 30'S HD SERVICAR. I REQUIRE THE TYPE WITH FULL LENGTH MOUNTING FLARE OFF THE SIDE OF THE FENDER. THANKS GEORGE

127. monukes@peoplepc.com message: LOOLING FOR HORN MOUNTING POSTS FOR A 1929 JD HARLEY. THANKS GEORGE

126. DPATCH2@KC.RR.COM message: WANTED TO BUY A OLD HARLEY FRAME TABLE DAN 913 515 3721

125. soyleni5@gmail.com message: Looking for parts for a 37' ULH. At this point all I've got is the motor, so everything else is needed. Looking for correct frame, springer, 4-speed, tanks, star hub wheels, etc. If you've got anything you'd like to trade for some cash you can email me at soyleni5@gmail.com or give me a call at 763-639-4643. THANKS! Chris

124. v.macrino@comcast.net message: I need the footboard sidebars ( clutch and brake pedal straps, the support rods for the sidebars, the front and rear fenders, and a spark coil for a 1929 harley Model D

123. col.wright@bsa.qld.gov.au message: Can anyone give me contact information for a leather seat restorer Heinemann (not sure of spelling)Thanks Heaps

122. col.wright@bsa.qld.gov.au message: Can anyone give me contact information for a leather seat restorer Heinemann (not sure of spelling)Thanks Heaps

121. col.wright@bsa.qld.gov.au message: Can anyone give me contact information for a leather seat restorer Heinemann (not sure of spelling)Thanks Heaps

120. caravel3@msn.com message: Hydra-Glide Front Fender Emblems

119. hitzeleric@netscape.net message: Looking for any part for a 39 Knuckle. Frame, bars, tranny...Whatever.

118. eb@patrimoinescontacts.com message: Hello,
Search timing cover for a 1918 Harley. Timing with oil pump inside. Make offer, i have some parts for trade.
Thanks George

117. thelooseendsband*@gmail.com message: WANTED: Buyer for Linkert M-344 Carb for 1941-44 Indian Chief (on eBay now)....will trade for Linkert M-53 carb...I have no Indians, just Harleys. Also have a nice Linkert M-642 for Indian 45 Scout.
Call: 417-276-9908 or email..take out the * in the email address.
Thanks, George!!

116. sve@tds.net message: WANTED for 68 FLH; Aaccesory chrome trim for top of inner primary also enclosed rear chain guard. good condition. Thank You

115. gerrard.kijkindevegte@hetnet.nl message: Looking for model J 1925 61 cui. parts. Still need headlight, rearlight, handoilpump, floorboards, exhaust. Thanks.

114. henderson@c.dk message: Parts for: Emblem 1920, Cleveland, Reading Standard, Thor, Excelsior 1917, Henderson 1918 - 1919, HD 21" TV or SV, Ner A Car,....
Thanks
Carl

113. blaircl2003@yahoo.com message: Looking for early Indian motorcycle engine. Need big chief complete motor and trans. Will trade 1917-1919 Indian bicycle with Evans Bolt on Motorbike kit with operators manual,handelbars,engine,magneto,gas tank,wheelsheath,gas levers,original old stock decals.Ready to restore. This is a neat old prewar colectors piece.Will also throw-in incomplete 1917 Indian model O engine. Let me hear from you if interested. Contact Steve (540) 649-2935 in VA

112. maximusroar@yahoo.com message: Need Henderson frame 25-28 short tank low frame and tank. Thanks Luke

111. ktcap@cox.net message: kick starter for 1917 Indian Power Plus

110. dwells@straussystems.com message: Still looking for 52-53 chief parts, need frame,352 carb,tanks,or sell me your project

109. rayfast@aol.com message: Luggage Rack for a 1961 sportster.Thanks

108. flathead@sol.dk message: Wanted 1937 or 1938 Knucklehead engine.
Mail me pix and price.
Thanks

107. bufordjunkyard@yahoo.com message: I am looking for a 2.75x21 avon speedmaster. Any help would be appreciated. thanks

106. bigyellowt@yahoo.com message: Have 1942 Harley XA frame looking to trade for 1923 Harley WJ opposed parts fenders,ex.manifold,floor boards,brake pedal ect.or will sell outright.

105. ja-nyb@online.no message: Wanted: Parts for my 1916 Thor Modell A project. Brake pedal, rear and front hub's, fenders, Troxel seat and other smal parts. Jan

104. ja-nyb@online.no message: Want cylinders for my 1927 Chief 74" engine. I need both. Hope you can help me. Jan

103. theknucklehead@hotmail.com message: WANTED: 16" KELSEY HAYES RIMS must be in very good condition. Will consider complete star hub wheels. Still looking for an original 1948 Harley rear fender.

102. "kickstart"mc@yahoo.com message: wanted,
1954 fl, flh,cases,left case half,or just h-d title,for my 54 pan
1926 wisconsin motorcycle plate
drop the " " on e-mail address

101. monukes@peoplepc.com message: Interested in purchasing 1940 HARLEY U or UL. Any condition considered.
THANKS GEORGE

100. stefan@ecn.net.au message: reading-standard parts wanted engine,transmission, complete wheels,any parts or imformation would be good . thanks peter

99. norgrovedave@hotmail.com message: Wanted: 1912 Reading Standard twin parts. I need cam/gear cover for right side of engine, carb and intake, tank, magneto, cams and gears for mag drive. Thanks George. Great site!

98. info@trinitymotorworks.com message: Wanted: Indian or parts for early camelbacks pre 09. Also 101 Scout parts or bikes. buying entire loads of early American bikes.
Cash Paid or trade. Have 20s and 30s Indian Scout and Chief parts, projects, bikes. Also complete 48 Chief runner. 38 Chief Bobber runner. 47 WL runner. 570-460-8123 Todd.
Check out our website www.trinitymotorworks.com
Thanks George

97. smp915@((sbc))global.net message: Looking for 1936 Indian ignition for a magnito Must have "M" on reverse Remove(( )) for e-mail. Thanks

96. presso54@idx.com.au message: Wanted Harley Davidson red white blue number 1 one belt buckle.
Please e mail with subject Belt Buckle.
Thank you John Happy new year everbody.

95. indianut @ msn.com message: Wanted 1947 Chief Sheet Metal with Original paint or very old repaint in nice shape. Remove space around @ to email. indianut@msn.com

94. presso54@idx.com.au message: Wanted harley davidson red white blue number 1 one belt buckle
thanks john

93. craigbgreen@yahoo.com message: I am looking for a front and rear clincher wheels for a 1929 Harley Davidson model D.

92. sheyanov@vtb.ru message: Dear Johan,

My name is Slava. I am from Moscow, Russia. I am interesting the history of military motorcycles (only sidecar`s wheel drive) and ready to pay good (very good) money for my hobby. This is the list of motorcycles witch I need. All machines should be restored and ready to ride. May be you have or suggest me some kind of broker?

1) Moto Guzzi" Trialce (Italy);

2) Gilera VL Marte 1942 (Italy);

3) "Harley Davidson" XS (USA);

4) "FN" M 12 SM (Belgium);

5) "Sarolea" H (Belgium);

6) "Gillet" Herstal AB 720 (Belgium);

7) NV Military 1000 cc (Sweden) Producer: Nymans Verkstander, Uppsala

8) Rikuo type 97 (Japan)

My contact is (English speaking possible):

Mobile + 7 985 106 63 41

Secretary + 7 846 332 60 26

E-mail: sheyanov@vtb.ru

Happy New Year!!!

Sincerely yours,

Slava


91. bruffsup@yahoo.com message: LOOKING FOR SIDECAR OR JUST CHASSIS TO FIT HENDERSON. ANYTHING CONSIDERED BARN FRESH ROUGH CONDITION OK. Want to make bike hauler platform for my dirt tracker . bruffsup@yahoo.com

90. vvmc_usa@yahoo.com message: help still need (2) two lids dented or bent or good for the 36/37 baby food jars ,which is the valve spring cups on those years of a knucklehead engine thanks for any help or leads

89. robertlloyd@cox.net message:
Looking for a sidecar body only, to fit an earlier Goulding chassis. Somewhere in the late thirties or early 40's would work, preferably a short torpedo style body that can be mounted on the right or left of the bike. 714 321-7577 or e-mail pictures

88. dwells@straussystems.com message: Looking for Indian News with- 1940 Indians in competition at langhorne -Has a full page of photos of indian racers. I will pay $300 if you have the pic i need. SEND PHOTO

87. kim6723@aol.com message: WANTED FOR 35 VL ORIGINAL PAINT-PARKING LAMPS,mounted on horn bracket bolts, both sides of headlight, in accessory catalog. Any accessories in patina condition,any parts in nice patina condition. Thank you all, & THANK YOU GEORGE !!! Kim

86. cknoop36"@"hotmail.com message: Pierce single chasis / forks Circa 1912 wanted. Trade FN single shaft drive frame / forks or cash.
cknoop36"@"hotmail.com

85. thelooseendsband*@gmail.com message: Wanted: 1949-1952 Panhead frame, front fork (glide), anything else you might have.....have original drivetrain..wanting to put this bike back stock. 417-276-9908 Thanks, Gerald (take the* out of the email)

84. thelooseendsband*@gmail.com message: WANTED: 1941, 1942 Harley "G" or "W" LH 45" engine case...can be close to junk or good.....let me know what you have!! Also, WLD/WLDR/WR cylinders, or other engine parts. Take the * out of the email address....or call: 417-276-9908 Thanks! Gerald

83. softtail5@hotmail.com message: looking for a nice 45 solo frame.

82. dwells@straussystems.com message: need m352carb,53 frame, 53 tanks email or call 281-642-6386

81. rmellon550@aol.com message: 1997 Softail Heratige Springer (the white with blue)10,600 original
miles. All original and in very good condition. Want to trade for basket case or beater (American only) plus cash.

80. thelooseendsband*@gmail.com message: Wanted: pair of Sportster 18" aluminum rims with the ridge around the outside edge. Also, any Harley WR stuff, or odds and ends, large or small lots of Harley W stuff. (take the * out of the email address) or call 417-276-9908 (Gerald)

79. rudderpower@telus.net message: wanted Headlight visor 7 inch for harley 1947 to 1959 style

78. jpierce@trical.cl message: Wanted: 1953 Harley K model parts. Motor, trans, etc.
Thanks. Jason

77. harleyjames@alltel.net message: Wanted: Indian sidecar,46 to 53. Contact Vern Goodwin at 402-785-9201 or Jim Francis at 402-466-4784 or email Jim at harleyjames@alltel.net

76. bigyellowt@yahoo.com message: Looking to buy a nice 1905 to 1915 twin motor,stock or racing eng.,please email photo and price,can be anywere in the U.S.

75. sberggren@sullivanconcretetextures.com message: I'm looking for an unrestored Harley Davidson around 1920. Thanks Steve

74. jdh28@NETZERO.NET message: 4161-28 COIL SPRING CLIP 4162-28 COIL CLIP (TO FORK BRACKET)1406-28 AIR CLEANER CONECTON 4107-28 ANTI-CHATER DEVICE 3452-25 TOOL BOX DOOR AMP METER BRACKET FOR A 1928JD hARLEY-DAVIDSON

73. mscottharley???@sasktel.net message: WANTED-Harley 39 only 45" ride control.Cash or trade.
Remove ??? from email address.

72. flathead@sol.dk message: WANTED!!!
1937, 1938 or 1939 Knucklehead engine.

71. flatheat@sol.dk message: WANTED!!!! 1937,1938 or 1939 Knucklehead engine.
Please mail pix and price.
Thanks

70. alan@robertsbridgeca.com message: Ace Ace Ace needed help in finding supplier for rubber handlebar grips & rubber footboard covers also ratchet kicker gear the one inside the trans.Thank You

69. ryan.orr@att.net message: I am looking for a knucle pan or flat head cylinder jug. That is
without a match and cannot be saved. I am looking for it for donor
fins.
Thanks
Creep

68. clownclass@yahoo.com message: Wanted a nice set of heads for a 1953 FL, have cash or parts to trade.

67. 48hdbob@onramp.bz message: Wanted: Late '47 Harley-Davidson Big Twin frame, not the bullneck

66. henderson@c.dk message: Thor about 1916 parts, interested in ALL parts for this motorcycle.
Have rare parts to trade with.

65. bigyellowt@yahoo.com message: Wanted 1913 Jefferson\Waverly stock twin frame,handle bars,fenders and oil tank,have cash or trades also looking for a 1909 to 1912 Indian rear fender bottom half can be cut off just need top half

64. bigyellowt@yahoo.com message: Wanted 1912 Emblem V twin manifold,ex.pipes and muffler,rear V belt pulley mounting brackets. cash or trade for other old mc parts

63. bigyellowt@yahoo.com message: Wanted 1909 Thor parts,like fenders,ex.pipe and muffler,will trade a 1912 HD twin manifold and carb.for 09 Thor manifold and carb.

62. bigyellowt@yahoo.com message: Wanted 1923 WJ fenders,manifold and carb,ex.pipes and muffler running boards and clutch and brake pedals,rear stand,ect. have extra 1919 WJ motor to trade or cash!

61. donvito17@comcast.net message: WANTED: Excellent Running Original 1936, 1937, 1938 Or 1939 Only-
Indian Four Cylinder Motorcycle-Looking for a real Nice Reliable
Bike---Thank You, George!---Mike---(916) 962-2942

60. cotra@tin.it message: Wanted: ACE Sporting Solo handlebar.
Stefano.
cotra@tin.it

59. cotra@tin.it message: Wanted: ACE Sporting Solo handlebar

58. chief348(((@)))juno.com message: WANTED; 12-13-07 Looking for a nice original uncut NECK for a 48 Panhead Frame. Might consider a repop casting if the price is right. Delete the ((( ))) when emailing. Thanks George.

57. indianut @ msn.com message: WANTED 1947 Indian Chief sheet metal with ORIGINAL PAINT in any color. I have to trade a set of 1953 Chief tanks and 1953 Chief POLICE rear fender both in EXCELLENT condition. remove space around @ to email!!

56. kim6723@aol.com message: WANTED ORIGINAL PAINT BIKES : Top Dollar, One to collections, some repaints could be considered if repaint is very old ! Thank You Kim PS American,European,Jap, All bikes

55. kim6723@aol.com message: WANTED ORIGINAL PAINT BIKES : Top Dollar, One to collections, some repaints could be considered if repaint is very old ! Thank You Kim

54. brianapryl@verizon.net message: Following items wanted, pair of pistons #22186-48 (256-48F), sand cast 8 rib gear cover for panhead, set of 51-53 handshift tanks.
Thanks, Brian

53. fatboy00@hickorytech.net message: WANTED: 1957-58 HANDSHIFT PANHEAD GAS TANK OR TANKS ALSO OTHER ORIGINAL PARTS FOR 1957!!!

52. vvmc_usa@yahoo.com message: HELP PLEASE i still need 3 tops to babyfood jars for 36/37 knucklehead engine. i need OEM parts bent,dented, whatever you have please look thru your stashes and see if you can help i need these to finish the engine ALSO need 9 original wheel lugs the long head /long shank that are drilled so they can be wire tied thanks for all for your help

51. yorgtat@hotmail.com message: LOOKING TO FIND A 40`S THORO FOOTSHIFT CONVERSION.....COMPLETE...WOULD ALSO CONSIDER B&H IF COMPLETE....ANY INFO WOULD BE VERY MUCH APPRECIATED....THANK YOU.....

50. stumpy45@zoominternet.net message: looking for box and right hand shift gate for 1951 servicar

49. indian@indy.rr.com message: Any American Motorcycles or American Parts for any kind of Motorcycle before 1953. No load to big or small. Will buy your whole collection. Have big cash and will travel. Joey at 317 201-7777 or indian@indy.rr.com

48. theknucklehead@hotmail.com message: WANTED ORIGINAL SPARK PLUG BOOTS WITH HARLEY DAVIDSON WRITING.

47. maximusroar@yahoo.com message: Wanted. Looking for Henderson deluxe low frame 24-28, and complete rear wheel. thanks.

46. bobsbikes51@verizon.net message: need exhaust system for my 1920 indian scout ,any one happen to have one laying around thanks everyone bob 1-661-723-7555

45. valron@atlanticbb.net message: WANTED:LOOKIN' FOR A NICE SET OF BLACK PANHEAD WAFFLE HANDLE BAR GRIPS TO FINISH UP A '57 PAN PROJECT. NICE USED OR NOS IF AFFORDABLE. PART #56212-53. I AM POSTING THIS FOR A COMPUTER ILLITERATE FRIEND. ANY HELP APPRECIATED. THANKS, RON.

44. roosterfish@verizon.net message: WANTED - Primary Cover 1913 Harley Davidson Single / Chain Drive E-mail me roosterfish@verizon.net

43. flathead@sol.dk message: Wanted 1937 or 1938 Knucklehead engine.
Best regards Søren

42. flathead@sol.dk message: Wanted 1937 or 1938 Knucklehead engine.
Best regards Søren

41. flathead@sol.dk message: Wanted 1937 or 1938 Knucklehead engine.
Best regards Søren

40. mph3000@aol.com message: wanted: 1911-1914 harley twin engine. can be total junk, rusted, broken no problem. can trade for 1910 hd single parts

39. marshmetz@aol.com message: Wanted: Motor for a Marsh Metz Twin. Also sold as National, Arrow and Peerless. This is a 90 degree twin very easy to identify. Any condition or parts. Ken

38. sfarrell@epix.net message: Wanted miltary wla restored or project,also looking for a knucklehead

37. vvmc_usa@yahoo.com message: HELP i still need a set or even one,two ,threeor four babyfood jar lids dented beat up or what ever so i can finish my engine with all OEM parts thanks

36. fatdog1903@yahoo.com message: Still looking for anything for my 1914 Harley 10B project. Especially Countershaft or Freewheel parts. Will take anything! Building this screw by clip! Have lots to trade or cash. Help a guy get an old one back on the road. Those parts will do better on a running bike than rusting in your basement!

35. vennepaul@gmail.com message: Wanted: 1914 Excelsior single speed chain drive primary cover and chain guard. Cheap reproductions would be fine since I am using them on my 1915-16 Excelsior restoration which is rusty, battered, original, and pieced together. Thanks, Paul Phone 1-562-4942811 Los Angeles, Ca.

34. fatboy00@hickorytech.net message: WANTED: SET OF 1957-58 HANDSHIFT GAS TANKS!!!!

33. indianchoutracer@yahoo.se message: 31-33 VL Basket case wanted.

32. doky2@centrum.cz message: Hi folks

i am looking for 101 indian scout... for riding and having fun
please offer, original or restored, doesnť matter.

thanx jan

31. DPATCH2@KC.RR.COM message: 1940 AND EARLIER HARLEY 45 FRAME AND SPRINGER . TRADE ONLY FOR A 46 FRAME AND SPRINGER AND A LIITLE BOOT DAN 913 515 3721

30. dcarmichael@2woh.rr.com message: right side suspention dampener plate/bar has a bushing in one end and is slotted down the center, also need the adjusting handle, for old style stock springer front end

29. vennepaul@gmail.com message: Wanted: 1914 Excelsior 61 cu in 2 speed crankshaft sprocket. Distance from face of crankcase to center of sprocket gear is 1 7/8". Also need crankshaft sprocket for single speed application single or twin. 1916 Excelsior: Exhaust nuts and intake cap nut. Any. Thanks George. Paul Los Angeles

28. johncamp@indy.rr.com message: WANT ANY THING FOR A 1923 JD ELEC.PARTS TOOL BOX,SWITCH,BUZZ OR AN MAG

27. info+++@---ace-ltd-usa.com message:

Posted 11/24/2007: WANTED - BUYERS - PARTING OUT a 1919 to 1923 Harley twin.


Sorry for posting to WANTED Section but my for sale postings never stick, so here goes!


All parts are near NOS condition unless otherwise noted.



1917 loop frame in perfect condition


1923 front and rear fenders in near perfect condition 1 dent


1918 to late 1919 electric switch


1920 to mid 1920's generator with distributor, rotor, cap and wires


Teens pigskin seat with H-D log in near perfect rideable condition


Teens auxilliary seat springs in perfect condition


1917 to early 1920's tool box


Teens handle bars, bare, slightly bent but otherwise perfect condition


1923 headlamp with connnector in near perfect condition


Teens taillamp near perfect, glass is chipped


PICTURES HERE


Remove the "s from the email address if sending email


Call Pete at ACE - Antique Cycle Engineering 603.396.8355





26. DPATCH2@KC.RR.COM message: WANTED 45 ENGINE CASES PREFER WL WLA DAN 913 268 5314 . NUMBERS MUST BE GOOD 913 268 5314

25. bigyellowt@yahoo.com message: Wanted to buy! your pile of pre 1916 motorcycles running or not,any make of pre 1916 motor's, twin's or single's,street and racing,frames,wheels,sheet metal, ect.email day or night!

24. burgular@comcast.net message: WANTED : Guide GLASS RH-55 red tail light lense. Must have Guidex script & have no cracks or chips, will pay reasonable market value. Must be able to send detailed closeup photos to: burgular@comcast.net or call Elmer at : (860) 982-6126

23. marklee1@charter.net message: Looking for vintage Lambretta scooter sx200 / tv200 / gp200 contact me at: MarkLee1@charter.net

22. harleyman53@spray.se message: Hello.
I am looking for a komplete set of bars for a 1947 offline, bigtwin, Knucklehead springerfork! I`d love if it is complete but it is okay with atleast handcontrols on it.I live in Sweden and i hope someone could make my cristmas this year. Thank`S..
Regards/Peter

21. DPATCH2@KC.RR.COM message: 1956 HARLEY PANHEAD FRAME UNCUT WOULD LIKE TO TRADE FOR A 1955 IN SAME SHAPE DAN 913 268 5314 913 515 3721

20. tarotplane@aol.com message: Need pre 1912 THOR frame! from poor to vg condition. picture and price or description. All answered! George em: tarotplane@aol.com

19. tarotplane@aol.com message: Need pre 1912 Shaw motor cycle or motor bike frame from poor to vg condition. picture and price or description. All answered! George em: tarotplane@aol.com

18. tarotplane@aol.com message: Need early 20s Harley handlebars from poor to vg condition. picture and price or description. All answered! George em: tarotplane@aol.com

17. valron@atlanticbb.net message: WANTED: I'M LOOKIN' FOR AN ORIGINAL KNUCKLE "LICENSE PLATE" BRACKET THAT GOES WITH THE BEEHIVE TAILIGHT ON MY '41 KNUCKLE PROJECT. IT HAS THE "HARLEY-DAVIDSON" STAMPED INTO IT. ANY HELP APPRECIATED. THANKS, RON.

16. monukes@peoplepc.com message: LOOKING FOR RIGHT SIDE SERVICAR FENDER LATE 30S-40S.MUST ME NICE CONDITION. WILL BUY THE PAIR TO GET ONE IF I NEED TO. JEFF 719-648-1233
********************THANKS GEORGE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

15. 48hdbob@onramp.bz message: Wanted;Late '47 Harley big twin frame, not the bullneck

14. bags@wildernesstrading.com message: Wanted to buy - All Linkert cores and NOS / Reproduction parts. We are buying all M-series Linkerts and now are also buying all DC models as we have started rebuilding those as well. Also Scheblers and parts. Thanks, Into The Wilderness Trading - see us ion the web.

13. testing@foofoofoo.com message:


testing


12. jpbeaufays@skynet.be message: Wanted: Front rod for 1922 Sport model flat-twin Harley-Davidson. Should also be interested in a complete crankshaft in very good condition.Thank you.

11. jim.snow@co.pierce.wi.us message: I NEED 2 OEM FRONT FENDER LIGHT GLASS, THE CLEAR ONE FOR A 49 PANHEAD,IF YOU HAVE ONE OR 2 PLEASE CALL OR EMAIL ME .THANKS FOR THE HELP.JIM 651-388-0546 EVENINGS

10. chief348(((@)))juno.com message: WANTED; 11-20-07 Looking for a real nice 48 Pan Front Head. I have a bare 56 front with perfect fins but the valve seats are a little shallow and the outer lip of the intake nipple has a small piece missing. All threads are nice and there is no spark plug crack. I'll trade it for a comparable bare 48 front or sell it for $300 so I can go buy the one I need. Photos available and delete the ((( ))) when emailing. Thank you George!

9. athelooseendsband@gmail.com message: thelooseendsband*@gmail.com message: WANTED: any rotted out, unuseable Harley 45 (WL,WLA,G, etc)gas and oil tanks. I know there are some of these rusted out tanks around.....let me know what you have! Also..any other W/WR stuff! (TAKE THE * OUT OF THE EMAIL ADDRESS) Thanks George!!
Gerald (417-276-9908)

8. jgoudzwaard@bellsouth.com message: Need a 55-57 RH Panhead Engine case please

7. vvmc_usa@yahoo.com message: HELP STILL NEED A SET OF 4 OEM LIDS FOR BABYFOOD JARS ON 36/37 KNUCKLEHEAD THIS IS THE LAST PIECES I NEED TO COMPLETE MY ENGINE I WILL TAKE BENT DENTED RUSTY OR WHAT EVER THERE HAS TO BE SOME SOMEPLACE THANKS EVERYBODY

6. tlf@hammercreek.com message: Still trying to locate a rotted, trashed, dead or dying VL style sidecar tub. Already have a nasty chassis, need a body to put on it for a rust display. I would also consider a complete unit with merit for restoration purposes, thanks, Tom

5. flathead@sol.dk message: 1937 or 1938 Knucklehead engine - complete or parts wanted.
Please send pictures and price
Best regards Søren

4. garcia_r@msn.com message: WANTED: HARLEY-DAVIDSON ORIGINAL THREE RIVIT CHAINGUARD FOR BIG TWIN, SEAT TEE WITH ZERK FITTING POINTING UP FOR BIG TWIN 1938-1939. RAY... 330-360-5586

3. dmelvill@gmail.com message: Looking for gas\oil tanks for an old flathead Harley Davidson 45". Between 1938-1950 would work. Also 3 speed trans, a 6 volt generator, and and an old springer front end for same. Most any condition, even if not all there.
Reasonable price please, I am on a fixed budget! Trying to complete a project I started many years ago.
Can pay via paypal if that makes life easier.
Thanks.

2. redfernmotorparts@bigpond.com message: HARLEY-DAVIDSON FRONT FORK LEG NEEDED FOR A 1939 W MODEL 45".
PART # IS 2607-30, AND SHOULD HAVE THE BOSS AND HOLES TO ACCOMMODATE THE 1936 UP RIDE CONTROL I BELIEVE.PLEASE E ME ON redfernmotorparts@bigpond.com IF YOU CAN ASSIST.MANY THANKS GEORGE!

1. bobsbikes51@verizon.net message: Hi all,would like to find xhaust pipes that will work on my 1920 scout have parts to trade or cash, can you help names bob 1-661-723-7555 I'm in so. cal THANKS

October 2007

85. dwells@straussystems.com message: looking for 53 chief parts to finish a few projects. send email with what you have and price or call 2814891006 and leave messege.

84. lardo1981@yahoo.com message: Always want my bike to look nice.And boy does it need some things .It's a 1964flh Duo-glide.
Windshield (with blue bottom half)
kicker petal (white)
Mufflers (fishtailed)
Mirror
Stock rubber floor mats
Any thing I can put on her to pritty her up (lights,
chrome balls,fancy stuff)

Thank You Arn Brown
(518)8438711 Evenings
(518)8433716 Ext.126 Days

83. donvito17@comcast.net message: WANTED: Frame, Leading-Link-Parallel-Strut Fork, HandleBars,Fenders
& other parts for a 1909 or 1910 RACYCLE Belt-Drive Single---Any & All Leads Greatly Appreciated---Thank You!---Mike (916) 962-2942

82. pigstye13@aol.com message: WANTED: I'm looking for a KR #2 rear intake cam to match to the KR #3 cam I have. Any one got one for sale or trade? Looks to be .375 lift, nothing but K R 3 stmped on the lobe.Thanks

81. bc422@aol.com message: Looking for 1959 to 1962 Harley Davidson sidecar axle
Contact Gene 610 666 6900

80. col.wright@bsa.qld.gov.au message: Can anyone help with an inlet manifold for a 1924 or later harley J (the distance between cylinders is longer than earlier models) to suit small schebler carburettor. This the only thing stopping me getting this bike running.thanks

79. lynven@yahoo.com message: I need a Split Dorf NS2-2524, right hand rotation, 45 degree firing magneto. It is for a 1926 Super X. Thanks much. Lynn 218-435-1517

78. hd36ohv$$@yahoo.com message: Harley Davidson VL oval toolbox and horn on eBAY 220170080318. User name = ulnut

77. bbop@dblclickit.com message: trade earley top dl primary cover for late32 up lower cover have early outer primary dl cover needs work for 35 rl outer cover

76. pigstye13@aol.com message: Wanted. 1941 45 front brake shackle in NICE condition. Also NOS 1940 EL front cylinder (I have the NOS rear ) & oil pump,cylinders and heads for 1939 Indian Scout. Parts to trade, restoration work or cash. Thanks.......Mutt
(903) 873-6644

75. bc1924@jippii.fi message: Wanted: Hedstrom carburetor and manifold for an 1910 Indian single.

74. mikesalonen@aol.com message: Wanted - set of cylinder heads for Harley Panhead. Prefer late model external oil feeds. Must be restorable.

73. uponrs@comcast.net message: LINKERT DC-12 wanted for 64 Sportster. Also looking for ORIGINAL 64 HORN. Thank you!

72. thelooseendsband*@gmail.com message: WANTED: any rotted out, unuseable Harley 45 (WL,WLA,G, etc)gas and oil tanks. I know there are some of these rusted out tanks around.....let me know what you have! Also..any other W stuff! (TAKE THE * OUT OF THE EMAIL ADDRESS) Thanks George!!
Gerald (417-276-9908)

71. hdsneegas@sunflower.com message: I'm looking for a straight, Servicar front fender with the hole cut in it for the siren. Specific year is 72 but I think and glide front end servicar fender should work. Thanks!!...Jim

70. cadyman_69_85@yahoo.com message: looking for 1959 xlch mag. for 900cc sportster

69. oldcycle@allstream.net message: Hey,I am looking for 1934-35 VLD Harley cylinders and heads.Tool box and speedo drive.Also looking for 1912 Yale 5hp cam gear cover,1907 Reading Standard parts for counter shaft ecentric and battery tube.Would appreciate any help on these items.Rick

THANKS GEORGE!!!!!

68. fatboypeanut@aol.com message: looking for 74/80 inch knuckle cases with good title

67. thelooseendsband*@gmail.com message: WANTED: Rear axle mounts or rear frame legs for a Harley 45 frame. I have a nice frame and some "dork" at some time cut the axle mounts off of and put on some kind of Indian-lookin' springs. ALSO: wanted any kind of HD WR stuff. Take the* out of the email address!
As Always...thanks for the ad George!
Gerald (417-276-9908)

66. BUFORDJUNKYARD@YAHOO.COM message: Hello I am looking for ribbed rear fenders stamped made in England have cash

65. mooseng@xplornet.com message: 1935 Harley RL parts. I am looking for a transmission, rear chain guard, horn mounting brackets, rear brake light switch, air cleaner. If you have any of these and are willing to part with them, send me a note.

64. vennepaul@gmail.com message: 1916-1924 Excelsior twin. I need one ring nut to hold the valve cap also called tower and one exhaust collar nut to get my motor running. Only need workable parts, not mint stuff. Got any left overs from your restoration? Thanks, Paul Los Angeles

63. valron@atlanticbb.net message: WANTED: LOOKIN' FOR BEEHIVE TAILLITE GASKETS. I ESPECIALLY NEED THE ONE FOR THE RED LENS. WILL TAKE ALL IF YOU HAVE THEM. ALSO THE 4 CLIPS THAT HOLD THE LENSES IN. WHERE DO YOU GET THIS STUFF? ANY HELP OR LEADS WOULD BE APPRECIATED. E-MAIL ME AT: valron@atlanticbb.net thanks, ron.

63. valron@atlanticbb.net message: WANTED: LOOKIN' FOR BEEHIVE TAILLITE GASKETS. I ESPECIALLY NEED THE ONE FOR THE RED LENS. WILL TAKE ALL IF YOU HAVE THEM. ALSO THE 4 CLIPS THAT HOLD THE LENSES IN. WHERE DO YOU GET THIS STUFF? ANY HELP OR LEADS WOULD BE APPRECIATED. E-MAIL ME AT: valron@atlanticbb.net thanks, ron.

62. chief348(((@))juno.com message: Wanted; 11-02-07 Need an unrestored 41-46 Knuckle Police Speedometer. I have an unrestored one year only 47 Knuckle Speedo that needs some internal work along with a new glass and bezel. It would be perfect for an unrestored bike when fixed. I will trade or sell the 47 speedo for $550. Recently a real nice untouched unrestored 47 speedo sold for over $1,000 on ebay! Delete the ((( ))) when emailing. Thanks!

61. 1qazaq@roadrunner.com message: I need 2,S&S L series carb, throttle disc & shafts, Shaft is smaller dia. then the newer avaliable kits! or any L series carbs for parts. Please Email: 1qazaq@roadrunner.com or call (740) 663-2210 Thanks George, Blackie.

60. maximusroar@yahoo.com message: Wanted: Need Henderson Deluxe frame, rear wheel w/hub, tank and seat. For my 27 power unit. Thanks

59. 48hdbob@onramp.bz message: Late '47 Harley-Davidson Knuckle frame in reasonable condition, Not the bullneck

58. wcbishop(@)bellsouth.net message: I am looking for an original Servi-car alternator cover as well as the alternator belt drive cover (any condition for either)for a museum quality Atlanta Police Servi car. Thanks for your consideration. remove the ( )from around the @ to e-mail Wayne

57. henderson@c.dk message: Reading Standard, Ner A Car, Cleveland, Emblem all parts

56. henderson@c.dk message: Henderson 1918 - 1919 all parts

55. henderson@c.dk message: Thor 1916 all parts

54. nonne2@hotmail.com message: SERVI CAR 1951-54 parts WANTED

- Gas/oil tanks
- Speedometer
- Seat post
- Hub caps
- Rear fender trim
- Handlebars


Thanks George !

53. Lcb66@sbcglobal.net message: I am looking for a Powell C 47 scooter. I am also lookinf for a C47 gas tank with the pump and gas cap. 707-489-8644 Pacific time zone.
Thank you.
Lee

52. thtileworks@mwt.net message: Old H-D battery wanted. Need not be funtional, but in good shape. Looking for one from the 1940's - early 1950's. Need the type designed for big twins. THANK YOU, Andy

51. rasmu2001@yahoo.co.uk message: Looking for a frame or frame parts for Indian 1910-1912.

50. MCINTOSH95482@YAHOO.COM message: WANTED-1930-36 VL FRAME,OR
PART FRAMES, CHOPPED FRAMES
TELL ME WHAT U HAVE

49. theknucklehead@hotmail.com message: WANTED++ I'M STILL WILLING TO PAY TOP DOLLAR FOR A 1948 HARLEY RIGID REAR FENDER. THIS IS THE LAST PART I NEED TO COMPLETE THIS BIKE. ANY HELP OR LEADS WOULD BE APPRECIATED. PLEASE, NO AFTERMARKET OR JUNK.

48. mph3000@aol.com message: wanted: basket case 1911-1915 harley twin engine. can be totally rusted out, broken ect. sell me your unusable engine.
thanks

47. fatdog1903@yahoo.com message: Looking for 1914 Harley Stuff, No motor part, I have all that. Need everything else, especially Freewheel parts. Have lots of NOS to trade Plus cash!

46. rocky@ironwigwam.com message: Looking for a Indian Powerplus clutch basket or parts, 1916-1926.

45. satanherself@gmail.com message: NEED. Useable rear 38-48 springer legs,can have lower damage as using for extened fork set up. ALSO 56-64 BT Transmission case with Reverse boss.

Thanx George

44. cyclepsycho@gol.com message: Hello, I'm looking for 2 NOS Judson Cycle-tron ignition coils. Thanks

43. jim.snow@co.pierce.wi.us message: I NEED A 1950 SIDE CAR ADJUSTABLE TREE FRONT FORK ASSEMBLY.IT IS THE ONE WITH 2 BOLTS THROUGH THE FORK NECK ,WHERE THEY SLIDE IN THE BOTTOM OF THE TREE.WANT HOLE ASSEMBLY OR PARTS.NEED HELP LOCATING PARTS.JIM SNOW 651-388-0546 EVENINGS OR LEAVE MESSAGE

42. bobsbikes51@verizon.net message: hi everyone i need a working mag for my 1920 indian scout, have parts to trade? or cash . i'm in ca. names bob call 1-661-723-7555-THANKS

41. brianapryl@verizon.net message: Hi, anyone have a sand-cast , 8 rib gear case cover for a 51-54 pan they would like to sell? Must be in good usable shape,nothing chromed or polishid please. Thanks Brian
{brianapryl@verizon.net}

40. FAKEIT@BELLSOUTH.NET message: WANTED!!!! 1936 AND 1939 (4) CYL. MOTOR ASSY. I HAVE ROLLING CHASSIS FOR BOTH INDIANS BUT NO MOTORS. THANKS RICHARD

39. rust2gold@comcast.net message: Wanted: Any parts for 1902-1905 Columbia motorycle. Manufactured by the Pope Manufacturing Company, Hartford, Conn. The Columbia was also sold under the name of American, Cleveland, Imperial and Rambler
Mark

38. robert.sigond@ge.com message: Wanted 1947 HD EL 61" rear cylinder. No broken fins please.

37. doky2@centrum.cz message: Hi folks

i am looking for 101 indian scout... for riding and having fun
please offer, original or restored, doesnť matter.

thanx jan

36. sve***ger@online.no message: Looking for a Harley Racing jersey, the dark green with dark colored arms or a white & black would do.
Could be used and even abused but should be medium size or bigger.
Remove the *** from e-mail address.
Thanks George
Sverre K. Gerber

35. thelooseendsband*@gmail.com message: WANTED: any Harley WR parts, WL, WLA,WLD, WLDR left engine cases, or blank cases, RH W engine cases, transmissions,orig W sheetmetal, 45 springers, f&r wheels, handlebars, Linkert carbs,etc. Let me know what you have!
Cell: 417-276-9908 (Gerald)
REMOVE the * from email

34. m.vandentillaard@chello.nl message: Want to buy factory lowered TT oiltank (horseshoe) for Pan or Knuckle frame. Preferably in good condition.
Thanks!

33. bigyellowt@yahoo.com message: Wanted for 1912 Harley twin belt drive ,any orig.paint parts like gas tanks,fenders,tool box,fork or frame,have old 1950's repainted 1912 twin belt parts in mint cond. to trade and cash!

32. info@trinitymotorworks.com message: Have Indian bikes and parts for sale or trade.
WANTED: Buying Indian parts, collections, bikes, etc.
Specifically interested in Indian 101 Scout parts, bikes, collections. Cash or trade for other Indian parts. Also looking for ANYTHING 1920s Indian racing (bikes, parts, memorablia), and Indian Camelback parts / bikes. Todd, www.trinitymotorworks.com, info@trinitymotorworks.com, 570-460-8123

31. the74shop@yahoo.com message: WANTED!
1971-1972 FX Superglide OEM sheetmetal. preferably original paint. Also looking for other parts pretaining to 71-72 FX's. Also looking for other complete original paint 71-72 FX's. Finder's Fee paid upon successful purchase of leads provided. Steve 845-389-7197

30. tlf@hammercreek.com message: Does anyone have a trashed, rotted, hammered or beaten VL sidecar tub to sell. Already have a frame, just want a shell to alter. Would consider a complete unit if it is inexpensive, thanks.

29. stephan.jetzer@bluewin.ch message: Hello
i search a komplett Ignition Distributor for a Harley Davidson 1923
Modell J
Thank Jou
Stephan Jetzer
Switzerland

28. mph3000@aol.com message: need a basket case harley early teens v-twin engine. not looking for good condition. can be a junker engine.

thanks

mike

27. info@kmlafilm.com message: looking for bike builders - who work with vintage parts. go to www.greatamericanbuilder.tv for info.

26. FickauPrototypes@cs.com message: Looking for any condition any year original Willard Battery. Complete or just a shell, cracked or not does not matter.
Thank you. Tom Fickau-Wisconsin

25. FickauPrototypes@cs.com message: Wanted: Headlight dimmer switch for a early 50's verticle -any condition considered. Thank you. Tom Fickau

24. info@utw-gmbh.com message: wanted: looking for Harley tandem seat (no buddy seat)parts, any condition. Thanks George!

23. oscarhedstrom@hotmail.com message: WANTED 10/20/2007: for Indian 1914 pedal single speed. Fuel tank, oil tank, fenders, fender stays, front foot board mounts and footboards, brake pedal and rod and some 28 x 3 clincher tires.. I am sure other stuff is needed so let me know what you may have for sale or trade. I am in Massachusetts USA. Email oscarhedstrom at hotmail.com THANKS..

22. keyla185@sbcglobal.net message: Wanted information and paperwork like owners manual etc.For 1935 Harley Davidson VD.Phone 203-215-3826.

21. jeffrey.goodsell@boehringer-ingelheim.com message: 27 SINGLE PARTS NEEDED: HEADLIGHT, HORN AND TAILIGHT,
BATTERY BOX, DIST CAP and SPRING CLIP-NOS or ORGINAL

20. oldmtrcyc@msn.com message: Anything Orient motorcycle from 1899-1903.

19. motorheadmike@comcast.net message: Hello out there, Im looking fo a engine and transmission for a indian chief 1922 - 25 . I have the chassis except the fork .I would prefer a complete powerplant. Also i would like to find a complete or mostly complete reading standard 1920 -24. Thankyou Mike 732 255 5854 .N.J.

18. motorheadmike@comcast.net message: Hello out there, Im looking fo a engine and transmission for a indian chief 1922 - 25 . I have the chassis except the fork .I would prefer a complete powerplant. Also i would like to find a complete or mostly complete reading standard 1920 -24. Thankyou Mike 723 255 5854 .N.J.

17. my46wl@yahoo.com message: STILL looking for a nice set of 46wl fenders, Original only in good shape. Also I need a 6ofl rear brake drum, Orginal only. Thanks

16. jpaponne@yahoo.com.ar message: I looking for pair carters for Indian Chief 1946 engine !!

15. sc1chuck@aol.com message: Looking for a Vard front end, would like a compleat one, and a springer for a XA call 713-478-4568

14. monukes@peoplepc.com message: WANTED....... HARLEY PACKAGE TRUCK CHASSIS, FRAME OR FENDER. THANKS

13. doky2@centrum.cz message: looking for 101 indian scout... please offer, original or restored. thanx jan

12. mcmanumj@mailbox.sc.edu message: I need a pair or 55 panhead heads for an upcoming project, I have a really nice set of 56 heads to trade or I can just buy them. Thanks, Matt 803-287-8575

11. mcmanumj@mailbox.sc.edu message: I need a pair or 55 panhead heads for an upcoming project, I have a really nice set of 56 heads to trade or I can just buy them. Thanks, Matt 803-287-8575

10. mcmanumj@mailbox.sc.edu message: I need a 6" J-Slot air cleaner cover and backing plate, it is the only piece that I am missing for my recently restored 40 EL. Must be restoreed or in restorable condition. Thanks Matt 803-287-8575

9. info"@"ace-ltd-usa.com message: W A N T E D : (Posted 10/16/07) I need a good set of Harley "bubble bags" saddle bags. Looking for original patina - no junk please. Call Pete 603 396 8355. Remove the "'s around the email address. Thanks!

8. shuvl427@comcast.net message: desprate still needed to finish my 36 el a set of baby food jar tops smashed dented bent or even good ones, only want oem parts no repops cash awaiting mabe some trade please look thru your parts stash i would like to ride this bike thanks

7. tarotplane@aol.com message: NEED EARLY THOR FRAME FOR BELT DRIVE, FUEL TANK AND MUCH ELSE..NEED PIX FOR RESTORATION! ANY THOR BITS FOR SALE! ALSO ANYONE W/ DATING INFO ON MOTOR SERIAL NUMBER? EMAIL OR CALL 10AM TO 10pm CENTRAL TIME , EM: TAROTPLANE@AOL.COM GEORGE 630-719-0168

6. wadella@mac.com message: WANTED OFFSET SPRINGER 47-48.....OR LEGS ..REAR OR FRONT .....THANKS .SCAMMERS BEWARE ......I DONT PHONE THE COPS I DEAL WITH IT PERSONALY

5. fyi@ihateebayscammers.com message: ALL: Watch out for ebay seller "barnut2003". He keeps advertising Harley KH fender emblems for $350 buy it now. They are an excellent repop, but they are repop and he is claiming they are original. I've held them in my hand and they are amazingly close but no cigar.

4. racefsm@aol.com message: we need 1951 clipboard for harley police bike......thanks

3. pan49@arcor.de message: wanted: rear fender and beehive taillight for knuckle 1946. Thanks

2. hd36ohv*@*yahoo.com message: 4 speed transmission or case for a 1984 or 1985 HD FXST Softail.

Jerry

1. lardo1981@yahoo.com message: WANTED:Anything fancy----Lights,Chrome,Dodads, Gadgets,Ring-o-fire,Anything I can stick on my 48 flathead to make her look pretty !!!!!!
Arn
(518)8438711

September (woops didn't update for a few months)2007

91. donvito17@comcast.net message: WANTED: PRE- 1915 AMERICAN MOTORCYCLES & PARTS---Thank You George!!!
Mike (916) 962-2942

90. mph3000@aol.com message: wanted: early teens harley twin engine. sell me your junk, can be broken, rusted and unusable. thanks

89. lardo1981@yahoo.com message: Looking for stock 1967 harley davidson motorcycle.(518)8438711
Arnie

88. lardo1981@yahoo.com message: Looking for stock 1967 harley davidson motorcycle

87. hogluvr@att.net message: Wanted: Harley Davidson inline springer handlebars, thanks!!

86. trent@atomiccustom.com message: Looking for a NICE 38 Knuckle frame. I have a beater, I need a nice one.
Also looking for a matching springer. Complete and in good shape please.

Email me with what you have.

85. info@trinitymotorworks.com message: WANTED: Buying Indian parts, collections, bikes, etc.
Specifically interested in Indian 101 Scout parts, bikes, collections. Cash or trade for other Indian parts. Also looking for ANYTHING 1920s Indian racing (bikes, parts, memorablia), and Indian Camelback parts / bikes. Todd, www.trinitymotorworks.com, info@trinitymotorworks.com, 570-460-8123

84. **hd65flh@comcast.net** message: Looking for stainless j-slot air cleaner for 49 EL. To reply remove asterisks

83. yorgtat@hotmail.com message: LOOKING FOR A 50`S ACCESSORY...FINNED ALLOY BRAKE COOLING RING...DONT MIND REPRO ASLONG....EMAIL ME IF YOU HAVE ONE TO SELL.....THANK YOU......

82. pigstye13@aol.com message: Wanted. 1941 45 front brake shackle in NICE condition. Also NOS 1940 EL front cylinder (I have the NOS rear ) & oil pump for 1939 Scout. Parts to trade, restoration work or cash. Thanks.......Mutt
(903) 873-6644

81. mph3000@aol.com message: need early teen twin harley engine. can be broken, cracked ,missing fins and totally rusted thru. thanks. sell me your junk

80. mlang@baycomp.net message: Wanted Beehive Taillight and Speedo for 1946 Knuckle. Call Mark 905-815-7782

79. wheldt@terra.com.pe message: need parts for a early Harley Peashooter sidevalve model
-schebler carb, tires, rubberboards, etc

78. bigyellowt@yahoo.com message: Wanted to buy pre 1916 American made belt drive twin in orig.paint if possible ? will buy outright or have nice orig. paint 1916 Henderson 4 cy.er,in running cond.

77. monukes@peoplepc.com message: WANTED - PACKAGE TRUCK FRAME AND FENDER FOR LATE30S TO 40S. JEFF 719-648-1233 THANKS GEORGE

76. flexform@qwickconnect.net message: Wanted: 1909 Pierce 4 clutch any condition or parts. Powerplus gas cap and syringe. Bosch ZEV mag parts for Indian. Thanks George. Chris C.

75. me@*removethis*joestuff.com message: Wanted, 62 XLCH CH sportster frame. Interested in the right part, not the manufacture date. Must be un-chopped. Have K Model frame, original, unmolested, as possible trade. I think it's KH 56, but not sure. Thanks George. Joe 301-962-6266

74. m.vandentillaard@chello.nl message: A while ago I spotted a lowered horseshoe oiltank for a bigtwin Harley. Lowered approx 1 inch. This was an aftermarket or factory tank, not done by the owner. Anyone have a tank like this in good shape they'd want to sell..?

I'm also looking for a vintage brace to mount over the springs/front leg of my inline springer. I can show you a pic of what I mean if you don't understand..
Please e-mail...

Thanks!

73. bigyellowt@yahoo.com message: Wanted Orig. Paint 1948 Panhead Gas Tank. Must be orig. paint red. Does not have to be in good condition just orig. and red. I only need the right side tank but a complete set would be okay also.
I also need a orig. 48 panhead speedo the light blue one.

Will buy outright or have many good old mc parts to trade.
530 305-6979

72. CBGUNS@COMCAST.NET message: Hi looking for a speedomter for a 1950 WL HARLEY
and a few odds and ends
any help would be great thanks
chris
cbguns@comcast.net

71. footclutch@aol.com message: Excelsior 1917 Lightweight Single Parts and Information WANTED. I have a good start, but need the help of the following: Wheels or Hubs, front and rear drive pully's, seat, controls, footboards, muffler, etc. Good Pictures would be very helpful! THANKS, John.

70. keyla185@sbcglobal.net message: Looking to buy a stock older Harley Davidson Full Dresser.Must be stock and prefer original.I am in Connecticut,serious and have a truck to come and pick it up in the area within several hours.Prefer it running,but will consider what you have.Please email me at keyla185@sbcglobal.net or call 203-215-3826.Thank you.

69. doky2@centrum.cz message: Looking for INDIAN 101 scout 45ci - original conditions or restored, ´28 or ´29 prefered but not necessary, THANX bye jan

68. vinceh@sause.com message: Want to buy left side of undamaged crankcase for 1962 XLH or XLCH. Will consider complete crankcase, if left side is undamaged. Parts with title preferred. Cash available.

67. info%%%@ace-ltd-usa.com message: W A N T E D : (10/06/07) I am looking for a nice original or perfect reproduction battery box for a 1919 Harley 61" twin. I have a not so perfect but original paint decent condition box for trading purposes. Call Pete at 603-396-8355. Thanks!

66. info%%%@ace-ltd-usa.com message: W A N T E D : (10/06/07) I am looking for the following in good overall condition with good light to medium patina for a 1955 panhead. I have NOS or near NOS of the same to trade. List: 1 or 2 SH-2 short stem spot lights, 1 set of black bubble bags, 1 inner primary, foot board studs for left side, used original H-D hardware of any type or size, rear stand, 1 stainless J-slot air cleaner cover, 1 chrome or stainless derby cover, 3 battery filler plugs, original mouse trap cover screws, rear cabbage cutter bumper, rear fender tip trim. I have a lot of extra 55-56 parts that I will be selling or willing to trade so please call me with what you have. Call Pete at 603 396 8355. Thanks!

65. americantreecare1961@yahoo.com message: 1950 panheads casting #1950 K-9 also 1948 to 1950 gastanks with tankshift Please call Dan @1-620-343-7013 or email@ americantreecare1961@yahoo.com

64. vr6_golf2@web.de message: Searching for Harley J JD cylinders, a pair or only one doesnt matter
Please let me know what you got
greetings
thx to george

63. dbs1968@hotmail.com message: Indian four first thought would be a 38-42 since I have a little more knowledge with those years but not to count out other years. Numbers not an issue just completed and twin project and want the take the next step up. I am most likley in a long list but you don't know until you ask! Thanks, Dave

62. dewgarinc@securespeed.us message: NEEDED 1912-1913 Harley clutch release disc.I believe I have everything else. cash, trade-all help appreciated!
THANKS Dewey
dewgarinc@securespeed.us

61. lazlobassett@optonline.net message: For '34 Indian Chief, Chain Guard, Gen. belt cover, Scavenger pick up cover, Motolamp headlight, Horn, Front Brake lever clamp. Have WLA Cycle Ray & original Harley Horn for possible trade.

Thanks,
Matt Picaro AMCA#9993

60. donvito17@comcast.net message: WANTED: 1952 to 1960 NIMBUS Special Or Sport Model Four Cylinder
With Or Without SideCar---Must Be In Excellent To Mint Original Or Restored Condition---Mike---(916) 962-2942
THANKS GEORGE!!!

59. vennepaul@gmail.com message: Wanted: All or part of the push rod assembly for the 1912-14 Excelsior twin. Thanks George. Paul Los Angeles

58. jim.snow@co.pierce.wi.us message: WANTED 1948 SIDE CAR PARTS,NEED BOTTOM SEAT CUSHION IN GOOD OLD CONDITION,SPARE TIRE MOUNT SPINNER AND LOCK,48-67 STEP,FRONT SIDE CAR BODY SUPPORT BRACE,REAR BUMPER.AND THE MAIN THING I NEED IS A SIDE CAR FENDER LIGHT .AND IF ANY ONE IS LOOKING TO TRADE A 48 SIDE CAR I WOULD LIKE A 49 SIDE CAR.JIM SNOW EMAIL OR CALL EVENINGS 1-651-388-0546

57. fatdog1903@yahoo.com message: Will trade for 1914 rear freewheel parts and countershaft parts! Very complete Harley-Davidson 1918 F engine with carb and mag. on EBay now see auction # 250171186891 This will go cheap and make someone a great twin racer engine!

56. kss3775@charter.net message: Wanted frame wheels front end for 1912 Excelsior belt drive. I have only a complete motor so any help would be greatly apreciated for any thing related. I have some parts to trade not for Excelsior.

55. DPATCH2@KC.RR.COM message: WANTED PANHEAD WISHBONE FRAME STOCK DAN 913 515 3721

54. sskustom@yahoo.com message: I really need a inline or offset springer rear leg. please help me out

53. sskustom@yahoo.com message: I really need a inline or offset springer rear leg. pleas3 help me out

52. fred@fjwillert.com message: I am restoring a 1938 Harley-Davidson WLD, need pictures of paint schemes and colors,

51. vr6_golf2@web.de message: Hello im searching for an ACE frame , fork, rolling chassis, or an basket case, engine parts,
all you got.
Please write me an email.
thx George

50. footclutch@aol.com message: Henderson K Model or Deluxe long gas tank needed, 1920-1923. Any condition. Transmission parts for 1917-19 needed. Thanks.

49. gpardos@ix.netcom.com message: test, wanted ads should be working now.

48. gpardos@ix.netcom.com message: test, wanted ads should be working now.

47. fatdog1903@yahoo.com message: Very complete Harley-Davidson 1918 F engine with carb and mag. on EBay now see auction # 250171186891 This will go cheap and make someone a great twin racer engine!

46. (clownclass)@yahoo.com message: Need a set of gas tanks for a 1948 FL, have some stuff to trade or CASH. Thanks for the ad.

45. dbs1968@hotmail.com message: 1938-42 Indian four project. Numbers do not need to match but would like the major parts like engine and frame. I know I am not alone with this request but you don't know until you ask. Thanks, Dave

44. panhead2@telus.net message: WANTED: panhead cases with good title, or complete motor. no shitty numbers

43. outfitter1996@yahoo.com message: Building a replica Bike and I need a 1910/1916 Indian Gas Tank or Henderson or Excelsor
Thanks

42. tmorris5@bellsouth.net message: lookin for a part #35809-58 to fit 75 sportster

41. jsm.clark@verizon.net message: I'm looking for a set of "sargeant stripes" rear fender trim, if anyone knows of an outlet re-pop or original, i would sure appreciate the heads up. Thanks JC jsm.clark@verizon.net

40. fakeit@bellsouth.net message: I have located a 1936 indian(4) rolling chassis and looking for a complete motor assy.

39. sales@@sams-cycles.com message: I have 2 1914 Harley twins in need of rear hub parts. For the single speed, I need the right bearing cup assy and the driving hub on the left side.
I need the right cone assy for the two speed.
Please take one of the @ symbols out of my email address before sending me any msgs.
Thanks
Sam

38. mscottharley???@sasktel.net message: WANTED- 34-39 HARLEY 45 FRONT FENDER STAYS OR CRAPPY,RUSTY FRONT FENDER....WITH GOOD STAYS.REMOVE ??? FROM EMAIL.
THANKS GEORGE !!!!!

37. NAM9TH@aol.com message: COMBAT WOUNDED VIETNAM VETERAN LOOKING FOR A 1942 WLA, MILITARY, OLD ORIGINAL CONDITION, OR WORSE, IS ABOUT ALL I CAN AFFORD, THANKS ALL & GOD BLESS...BILL IN FLA.

36. mph3000@aol.com message: wanted: early teens harley twin engine. can be cracked ,rusted broken , unusable,ect. sell me your junk engine for display. need one as complete as possible.
thanks

35. test@test.com message: does this work?

34. test@test.com message: does this work?

33. doky2@centrum.cz message: Wanna buy ** INDIAN 101 ** scout preferably 45 c.i., preferably 1928-29; original conditions or properly restored; THANX a lot for any offers incl. price and pictures (if possible)

32. **hd65flh@comcast.net** message: Looking for buddy seat for my 65 pan. Needs to have date stamp on underside. Thx. Plz remover astericks when contacting me

31. itzbill@nctv.com message: Hi !
Looking for gas shut off valve for a 1929 Henderson. It has a 1/8NPT male thread on one end. any shut off with this thread would probably work.
Thanks,
bill nary

30. alongrider@yahoo.com message: I am looking for a UL or ULH flathead basketcase,almost complete basket case(tranny,motor,frame,primary)well you getthe idea.I have a 47 Knuckle,a 52 Pan,and a 57 Pan with 76 Shovel top end.Looking to find that flathead to build and run.

29. hogluvr@att.net message: Wanted: Harley 45 2-bolt sprocket cover and clutch arm for 1940 transmission, also looking for a set of inline springer handlebars.

28. nonne2@hotmail.com message: SERVI CAR rear rims 1951-up !

27. info@@@beautyofspeed.com message: I'm looking for a 1936-1941 left side knucklehead case. ANY CONDITION. Email me with just one @. Thanks,
Eric

26. mscottharley???@sasktel.net message: WANTED- 36-38 HARLEY KNUCKLEHEAD ROCKER ARMS AND ROCKER SHAFTS.WHOLE SET OR SINGLE PART.CASH OR TRADE.
REMOVE ??? FROM EMAIL ADDRESS.

25. ((33vle@optonline.net)) message: WANTED
1915 HARLEY 3 SPEED FRAME
I know a few were sold @ Davenport this year, but I couldn't make it....

Looking for Prest-o-lite tank cradle( includes headlamp) for handlebars....I'll be happy with just tank straps for handlebars too...

Am also looking for 15 and earlier cylinders and pre 09 motors.. (can't hurt to wish)

Just remove (()) from email
Thanks, Bill

24. asphaltbouncer@hotmail.com message: Looking for a chainguard for a short frame 1920-1927 Indian Scout. To email me remove the + sighns, asphaltbouncer+@+hotmail.com Thanks, Mark

23. ga.vandal@yahoo.com message: Really need a vl springer front leg and top clamp.

22. mph3000@aol.com message: wanted: early teens harley v-twin engine. any condition.
thanks

21. my46wl@yahoo.com message: Need the following parts, 46wl fenders, must be in good shape and original, also need a rear brake drum for 60 panhead stock only, # ends in 58c, Thanks for any help

20. valron@atlanticbb.net message: WANTED: STILL LOOKIN' FOR A "BASE" FOR AN OLD SPORTY FAIRBANKS-MORSE MAGNETO. THE ONE WITH THE HOLE IN IT FOR THE TACH DRIVE CABLE. ANY HELP WOULD BE APPRECIATED. E-MAIL OR PHONE ME AT 814-749-8070. WEST CENTRAL PA. THANKS, RON.

19. jarichardson4+@+msn.com message: I build Indian engines. Chief or Scout. I build them as if they are my own. Thanks Remove + to email me!!

18. LPHFARM@AOL.COM message: HARLEY J TYPE FRAME FOR RACER PROJECT. I HAVE A 1921 ENGINE AND AM LOOKING FOR A SUITABLE FRAME. KERRY 904-845-7400 OFFICE

17. pnordling@epicor.com message: Desperately seeking a 1947 knucklehead motor w/ matching cases and heads. Good price for a good motor! Could even consider buying just a good set of cases and heads. Please email pictures and asking price.

16. mkmfox@comcast.net message: I am in need of the front forks, brake backing plate and handlebars for a 1929 Harley JD. Any help would be appreciated.

15. sjsudderth@yahoo.com message: looking for a bates seat does anyone have one for sale cash paid

14. ga.vandal@yahoo.com message: Would like to find an xa springer. thanks for any leads

13. pknoll49@hotmail.com message: Need speedometer cable for 1966 Harley Davidson M50 Sport, 50cc that I am restoring. Hope someone out there has one! This is the last part I need to complete the restoration.

12. bobby.mahal@forbesengg.com message: 42 WLA rear military fender

11. marshmetz@aol.com message: Wanted: Motor for a Marsh Metz Twin. Any condition or parts. Ken

10. vr6_golf2@web.de message: Hello ,Searching for a Knucklehead basket case (bottom end)nice one or something to repair.
Please let me know what you got.
Write me an mail.
Thx george

9. danfitzgerald@insightbb.com message: Looking to buy a 1937, 1938 or 1939 Chief. Unrestored bike or fairly complete basket case or older restoration. I have the funds available and just want to pay a fair price for an honest bike. E-mail danfitzgerald@insightbb.com if you can help.

8. grevbo@yahoo.com message: CAN ANY BODY HELP ME WITH A ENGINE OR GEARBOX FOR JAMES W-TWIN 1929-32 OHV
OR HANDLERBARS WITH LIVERS,SPEEDO AND SPEEDODRIVE.
THANKS JORGEN

7. vr6_golf2@web.de message: Searching for an 1000 ohv JAP engine, KTO / R or JTO / R
If anyone got something,complete or not doesn´t matter,so please write me an email to vr6_golf2@web.de
Greetings
Thx to George

6. theknucklehead@hotmail.com message: WANTED: 1948 PANHEAD REAR FENDER. TOP DOLLAR PAID!!

5. hickswd@bellsouth.net message: I need an exhaust rocker arm for a knuckle front head, must be in runable condition.

4. info%%%@ace-ltd-usa.com message: W A N T E D : A buyer for my 1919 twin and 1932 C model single Harleys. See them at www.ace-ltd-usa.com/1919 and www.ace-ltd-usa.com/1932 . Call Pete at 603-396-8355 . Sorry for posting to WANTED but I can't seem to get my listings on the FOR SALE side to save my life. Remove %%% in email address to contact me via email. This message posted 09/12/2007. Thanks George.

3. bigyellowt@yahoo.com message: Wanted 1911 or 12 Armac single or twin motor and mis.parts will buy outright or trade other MC parts you may need ?

2. proto60pan@mchsi.com message: Needed: original paint HI-FI blue front fender, rear fender and taillight for a 59 panhead (563)320-2014 -Brad

1. shuvl427@comcast.net message: needed to finish my 1936 el
1-valve spring cover caps 175-36 4 needed will take any you have
2-a three rivet rear chain guard 3817-36
3-jiffy stand leg 13201-36 the short one
4-wheel mounting socket screws 4026-35 longer then normal with hole drilled for wire tying need 9 of them
any help to finish this project would be great please look long and hard someone should have some of this thanks

June 2007

148. dcalla@buckeye-express.com message: looking for manual and wireing diagram for 1978 AMF roadmaster Motorized bicycle. Also need the rear cover for the engine.

147. jsrestore@aol.com message: does anyone have contact info for bruce meinking at sport specialties, he manufactures parts for servi car axles,, thanks

146. jsrestyore@aol.com message: does anyone have contact info for bruce meinking at sport specialties, he manufactures parts for servi car axles,, thanks

145. dixchief@gmail.com message: Indian junior scout motor/tranny. Thanks George
RG

144. tony.parella@sharedtechinc.com message: Hello, I am looking for a motorla police radio,antenna, period correct siren, and police graphics for a 1956 Harley davidson servi-car. Please email or call 214-475-8088 Ask for Tony.

143. info"(@)"ace-ltd-usa.com message: W A N T E D : Would like to trade a very nice 1919 H-D motor for a 1923 motor of near equal quality. Also need a 1923 "spring" tail light and trade an early electric switch for a later switch and terminal plate. Remove the '"'s and the "()"'s before responding via email. Pictures of the parts in question can be viewed at www.ace-ltd-usa.com/1919 . Call Pete for more details at 603 396 8355.

142. ryan.orr@att.net message: I need a set of gears for the cam chest on a 47 knuckle.
Thanks

141. duda@rduda.com message: Servi car parts, need 33-34 servi frame, need 3 piece chain guard, need speedo for 36 servi, 802-888-7689, thanks George

140. duda@rduda.com message: Servi car parts, need 33-34 servi frame, need 3 piece chain guard, need speedo for 36 servi, 802-888-7689, thanks George

139. footclutch@aol.com message: ACE fork bearing cups wanted for pre-Indian fork. Anybody making these? Tnanks for any response.

138. footclutch@aol.com message: Henderson transmission parts wanted for 1917 - 1919, anything!! Flywheel, clutch, timing gears wanted. Anybody interested in new foot-starter jaws for same? I am thinking of having a few made. Let me know please. Regards, John.

137. fbac@family-net.net message: WANTED: Early 30's Harley Servi Car 32-35.Complete or project.

136. bikerbobj81@comcast.net message: Looking for a Luggage Box Nameplate part # 53311-69
It's a HARD DECAL for the Box Lid. See the item I'm looking for on page 154 of the FL 1941 to 1984 Harley Parts Catalog, item # 33.
Any help is appreciated. Thanks, Bob

135. dande@svtv.com message: WANTED SQUASHED BIRD TRIM FOR 42 HARLEY FRONT & REAR FENDERS, THIS IS A PART THAT THAT FITS ON TOP OF FENDERS. DREW ANDERSON CANTON SD dande@svtv.com or call eves 605-987-2494

134. gpardos@ix.netcom.com message: test

133. vennepaul@gmail.com message: Wanted: Clutch arm/worm for 1916 Excelsior 61 cu in twin. Arm is two piece with the upper section adjustable to activate the transmission interlock. Not same as 1915 arm or later heaver 1919 clutch arm. Also need valve cap ring nut in chewed up but usable condition. Thanks George. Excelsior! Paul in Los Angeles

132. theknucklehead@hotmail.com message: WANTED: 1948 HARLEY RIGID REAR FENDER. MUST BE ORIGINAL, NO AFTERMARKET OR JUNK.
THANKS

131. ((33vle@optonline.net)) message: Looking for Prest-o-lite tank straps (for handelbars) and /or headlight tank mounts....
Thanks Bill
Remove (( )) from email

130. ((33vle@optonline.net)) message: For ad 129, remove (( ))

129. ((33vle@optonline.net)) message: WANTED
1915 Harley 3 speed frame
Any early Harley parts welcomed
Thanks,
Bill

128. bigdz888@cox.net message: wanted : Indian hubs for my 1940 chief . one hub or a set with 18" rims and spokes what do you have ? any help would be appreciated. call or Email Dino 440 773 5848 or Bigdz888@cox.net

127. bob_mcmillen@yahoo.com message: WANTED

An origional Yellow Jackets MC Jersey from 1940s 0r early 1950s.
Black body with yellow and black striped sleeves.

Large round patch on back with large Yellowjacet wasp,
Inclosed by " Yellow Jackets MC

Also looking for living 1940s and 1950s YJMC members.

126. pigstye13@aol.com message: WANTED: I need a nice complete oil pump for a 39 Indian Scout. reasonally priced please or will traded restoration work.
(903) 873-6644

125. jcsrestoration@yahoo.com message: Email address was incorrect in last ad. it's jcsrestoration@yahoo.com .
Wanted:Chassis or Forks, Frame, wheels, etc. for 1940 Indian Scout 640 project. Email me with prices and we'll go from there, thanks for the help, thanks George.
Dave
AMCA#1388
WI

124. jcsrestoration@yshoo.com message: Wanted:Chassis or Forks, Frame, wheels, etc. for 1940 Indian Scout 640 project. Email me with prices and we'll go from there, thanks for the help, thanks George.
Dave
AMCA#1388
WI

123. chief348(((@)))juno.com message: Wanted; 9-3-07, Need a nice original or decent repairable 41 to 45 HD Big Twin Frame for a friend of mine here in New England. He has a real nice 45 Solo 3 bolt Frame, 45 Springer and 45 civilian rear fender to trade or sell for $2500 outright. I can tell you right now because of his age he is not going to ship the frame, springer or fender. E-mail me -delete the ((( )))- and I can put you in touch with him as he is not online. Thanks George!

122. softtail5@hotmail.com message: i need a 45 solo frame and front end. and a 12-14 excelsior escentric set up. thanks curtis

121. bradamazza@libero.it message: Hello.
i'm looking for harley gas caps 61103-83, 61102-83a nos in original package.
Can you help me?
Thanks a lot.
Francesco

120. work1006@@@@earthlink.net message: Looking for rear fender for 1925-27 Harley twin
anything repairable needed. plus head lamp any extras?
thanks take @@@@ to email.

119. vr6_golf2@web.de message: Hello I´m searching for Harley WL oder WLA Parts, searching front fork ,transmissions, frames.
Please let me know what you got.
Also searching for a Stearmy Archer LS HW 4 bolt transmission.
Write me an email.
Greetings

118. bizzycook@hotmail.com message: Hello, I'm looking for a set of decals or an orginal tank for a 1976 superglide liberty edition...any help would be great!, Cody

117. hogluvr@att.net message: Wanted: Inline springer handlebars and other parts for a WL project. Thanks George!!

116. rboykeps@yahoo.com message: i am lookin for M88 Linkert carb [For WLA]
>completed condition<,.... please,.. email me
thanks

115. garcia_r@msn.com message: WANTED: OEM Harley 3 rivit chainguard.... not a "made" or repro, must be ORIGINAL. Thanks

114. sandbyland@tele2.se message: I am looking for a 36-39 Knuck.
Must be quite original.
With nice VIN, frame, fenders, tank.
I am a enthusists that is looking for a original bike to ride and use after if needed some restauration.
No museum or trailer queens here...;-)
Is today riding a nice original 1938 BT flattie with sidecar.
Should be nice with a top valve engine for solo driving...

113. $$4cylchevs@xcelco.on.ca message: wanted for 1914 excelsior single belt drive gas and oil caps, gas petcock, tank straps,idler spring,1 male control rod end, 1 female control rod end, 1/4 thread brake clevis, eclipse clutch stationary arm, eclipse accuating arm ( long ) exhaust nut, spark advance arm, gas tank, front and rear rims, 1 3/4' belt sheath, used white tires

I have an original paint twin tank - needs some body work to trade for the single tank - can send pixs

remove $$ for email address

thanks george

112. valron@atlanticbb.net message: WANTED: LOOKIN' FOR A GOOD BASE FOR A OLDER FAIRBANKS-MORSE MAGNETO. THE SPORTSTER MAG WITH THE HOLE FOR TACH DRIVE CABLE. ANY HELP WOULD BE APPRECIATED. E-MAIL OR PHONE ME AT (814)322-4003.
WEST CENTRAL PA. THANKS, RON.

111. tarotplane@aol.com message: Indian power plus parts wanted..speedo, rear wheel , hub, gears, lots of misc..carb Schb 21 or 24 email tarotplane@aol.com or call george 630-719-0168 home or cell 630-728-7866 10 am to 10PM central Chicago !

110. tarotplane@aol.com message: Wanted : 1906-1919 project bike for restoration, all considered! I want near complete motors from same period. Also want 50s Indian vertical parts for Warrior Warrior TT : rear wheel, hub sprocket,chainguard, buckhorn h/ bars, speedo. Warrior tt motor. front hub/braking assembly. I answer all emails! email : tarotplane@aol.com or call George Home 630-719-0168 10 am - 10PM cell- 630-728-7866 central time ..I will be at Davenport!

109. sjsudderth@yahoo.com message: looking for S&S L series carbs. cash paid thanks

108. jcp02@cox.net message: Needed: Set of 74" panhead cylinders with late 1951 or early 1952 date codes. Idea set will have no broken fins or dropped wrist pin keepers and at least one good bore left in them. Good price paid for the right set. E-mail or call with what you have. Thanks! Jim Hansen 619-449-8560

107. pamob1@yahoo.com message: Dad wants a fixer-upper Harley Servi-car.
Green Bay, Wisconsin

106. ga.vandal@yahoo.com message: hello I would like to find a Bates Seat. If anyone has one for sale please let me know thanks

105. dpatch2@kc.rr.com message: WANTED 1952 1953 PANHEAD CASES OR MOTOR DAN 913 268 5314 913 515 3721 CELL

104. classic_bikes@web.de message: Hello, i´m searching for a Sturmey Archer HW (heavy weight) Transmission in good shape,im also searching for an english motorcycle seat, maybe racing seat.
Please send me a mail if you got something of this stuff.
Thx George

103. jcsrestoration@yahoo.com message: Wanted: Looking for a 1940-41 Indian Scout 45 cu in. project or any parts?Anyone got?I'll be in Davenport. Email or call and we'll line something up, thanks George.
Dave
(920)627-2163
AMCA#1388

102. redfernmotorparts@bigpond.com message: HARLEY-DAVIDSON U MODEL ALUMINIUM CYLINDER HEADS WANTED. IF ANYONE CAN ASSIST, PLEASE CONTACT ME ON redfernmotorparts@bigpond.com MANY THANKS, AND THANKS GEORGE.

101. blackmariah1962@yahoo.com message: i am looking for a volume control switch in the handlebar control for 88-95 hd dressers #71593-88 and 71806-88 button. these parts are obsolete fromm hd. any help in locating these will be greatly appreciated thanks

100. deserthawg@hotmail.com message: Wanted: 1946-1953 Indian Chief rolling frame and/or misc. parts.

99. blackchevee3@yahoo.com message: I wouldlike to know is there a way to stop the engine oiling the chain , without hurting the engine its messy the bike is a 31 harley VL thanks

98. luke2007@mail.goo.ne.jp message: looking for 41~47knucklehead leftside crankcase.no welded preffered.

97. mysterious_angel_face@yahoo.com message: to whom it may concern . i have a 73/75 harley x90 and im looking for severaul parts to rebiuld the bike including a how to repair manual. im also trying to find tyres for the bike as well tyre size 3.00-10 knobby and street tread. ive had the motor in a bike shop for one year and 3 months and im not getting any closer to completion could anybody please help me to do just that with some info on parts and if anyone knows of some one with a bascket case x90 as well im looking to biuld more to pass on to my children here in austraila

96. sjsudderth@yahoo.com message: lOOKING FOR A VL FRONT LEG AND THE TOP CLAMP WITH 1 1/8 NUT THANX

95. pnordling@epicor.com message: Looking for a complete 1947 FL engine with at least for '47 correct VIN #, matching belly numbers and heads. Just a matching pair of '47 engine cases would also be of interest. No need for titel.

94. stefan@ecn.net.au message: harley 1919 flat twin parts footboards & controls , rear brake backing plate . indian 1913 rear cylinder intake dome & intake manifold for single . thanks peter

93. bigyellowt@yahoo.com message: Wanted Indian Racing Jersey pre 1910 if possible in any cond.also orig. Ca. race poster's from 1908 or 09 will pay or trade rare parts,will be at Davenport

92. ktomicic@toughcustoms.com message: I am looking for a very rare Harley Motorcycle engine. It is a 1921 Harley Davidson "Racer" The motor was 61 cubic inches (1000cc) and had eight valves. Either original or a remanufactured version.

thanks, Kris

91. glidepath1(@)cox.net message: Looking for parts for a 1914 HD Twin. Parts to trade of will purchase outright. Please remove the ( ) around the @. Thanks.

90. charles-epineau@club-internet.fr message: Hi, I seek a buddy seat for my Panhead 48-52 or Buco. Deal possible with a pairs of Buco leather saddlebags in very good condition (NOS)if interest someone.
Thanks.

89. dmk441@yahoo.com message: Wanted:1940-41 Indian Super Scout 45 cu in. project or parts. email me if you have anything, thanks George.
Dave

88. msoden@snet.net message: 1949 Indian Scout Vertical Twin Parts

87. kim6723@aol.com message: WANTED- 1912 hd single oem parts, I'm building an original paint bike with brown rusty frame & fork. Any rough parts will work. Have 12 trading stock. Thank you very much, Kim amca # 6452

86. ga.vandal@yahoo.com message: Looking for a b/t inline or offset springer rear leg.

85. indianfourdoc@aol.com message: 1937-39 chief or four leaf spring front end. All sheet metal, original prefered 37-39 chief or four. Marty

84. fredrik@vildabomben.com message: Henderson-Heath aircraft motor wanted. Earlier Henderson model De Luxe aircraft motor conversions considered. WIll buy or trade for 36-39 Knucklehead parts.

83. hdpan@atlanticbb.net message: Wanted Knucklehead motor WITH GOOD title

82. luke2007@mail.goo.ne.jp message: looking for 1941~47 knucklehead leftside crankcase.please tell me condition and price.

81. gamado1@verizon.net message: Wanted 1967 HD servi-car fiberglass box and other associated parts. Have main parts frame rearend motor and trans. Looking for left side shifter, clutch pedal, starter, generator and any other accessories.

80. khellendall@comcast.net message: I own a 1969 restored police Servi-car that was used for parking enforcement. I am looking for an original Harledy Davidson chalk stick that was used to mark tires. THANKS Ken

79. sjsudderth@yahoo.com message: looking for some goodyear grasshopper tires. Let me know what you got.

78. henderson@c.dk message: THOR about 1916, interested in ALL parts for this motorcycle!!!!
If you not want money then:
I have manny parts for very old American motorcycle to trade with.
Kind Regards Carl

77. jcsrestoration@yahoo.com message: Wanted: 1939-41 Indian Sport scout project, fairly complete non running or running. Thanks George.
Dave
WI

76. MIKEM38@OPTONLINE.NET message: LOOKING FOR OIL PUMP COVER FOR A 38 KNUCKLE.COVER I HAVE HAS OIL FITTINGS THAT ARE PART OF THE CAST.THANKS.

75. ib@trupart.co.uk message: WANTED; Schebler HX160 or DLX12 carb for 1919 HD model F. I have a HX189 (Indian Scout) perfect and rebuilt to sell, exchange, other.
Thanks Ian

74. pigstye13@aol.com message: WANTED: I need a good Sunnen AN-600 hone head. Have many completely restored Linkerts from 1933-65 on hand for trading material or lots of other vintage Harley parts from that time frame. Thanks....................Mutt (903) 873-6644

73. meyer-juergen@lycos.de message: Hello I'm looking for a
Indian 741-B Lower Tree
can you help me please
I'm in Germany
Thank you
J.M.

72. 48hdbob@onramp.bz message: Wanted: Knuckle rocker boxes with -9 date code for early '40 EL. No junk please

71. dewgarinc@aol.com message: Wanted late teens to 1923 era harley coach green paint,can, tube, whatever you have!Don,t need much just a sample! please email me thanks Dewey

70. ironcountychoppers@yahoo.com message: WANTED : USED PISTONS FOR HARLEY JD 1929,,, thanks

69. classic_bikes@web.de message: Hello I´m Searching for Harley JD and WL/WLA parts.
Needed WL/WLA Parts
Frames,Tanks,Front forks

Needed JD Parts
Tanks,Cylinders,Front Fork,Wheels

Please Email me if you got some of this things.
Greetings and Thx to George
Hagen

68. bdeveloursprod@noos.fr message: looking for an Indian Scout 1923-25 in very good condition
or an older Powerplus,for sale at a reasonable price

67. hogluvr@att.net message: Looking for a front brake shackle for a '40-52 WL, have a '30-39 shackle to trade or cash. Also looking for a set of '40 WL cases, have a set of '47 cases to trade or cash. Looking for inline handlebars, front and rear fenders, and a lot of smaller stuff for a 1940 WL project, have some small WLA parts for trade or buy outright.

66. willy@southwind.net message: Looking for the following original parts for a 1972 Penton Jackpiner:

head light
tail light
speedometer
aluminum fenders
front number plate
gators for front forks
tool pouch
tool rack to hold the tool pouch

65. ealex58@ix.netcom.com message: Wanted to purchase any American belt drive, singles or twins, restored or unrestored condition. Prefer Harley's. Also looking for pre 1915 American bikes chain or belt drive. Fair prices paid for good bikes.

64. admin@test.com message: test hi test
july 27 2007

63. hogluvr@att.net message: 1940 WL cases, will buy outright or trade off a set of 1947 cases, have a few other things to trade as well.

62. ga.vandal@yahoo.com message: Looking for early georgia m/c license plate 1930's to 1969 thanks

61. jcsrestoration@yahoo.com message: Anyone have any Evans Power Cycle parts?email me if you do, thanks George.
DK

60. dmk441@yahoo.com message: Wanted: indian project, sport scout, scout, or chief project 1932-1947. Email me with photos and a price. Can pay cash, I also have an R27 for partial trade, thanks George.
Dave

59. allsure@bigpond.net.au message: G'day from Australia!
I need a pair of conrods from an Indian 1200 military model.
I have some parts that maybe I can swap or I will pay cash.
Regards
Ian Donaldson

58. janhatfield@msn.com message: wanted original genuine paint 1980 or 1981 fxwg flame 5 gal tanks. thanks, jan 304-544-1956

57. $$4cylchevs@xcelco.on.ca message: still looking for the following parts for my 1914 excelsior single belt drive, gas and oil caps, gas petcock, tank fittings, tank straps, idler spring, corbin brake hub nut, exhaust nut, eclipse stationary arm. eclipse clutch arm ( long ), spark advance lever

will be at wauseon AMCA meet this weekend - look for the enlarged photos of this bike to find my spot

remove $$ for email address

thanks george for the great site

56. bigyellowt@yahoo.com message: Wanted to buy! Flying Merkel 1902 to 1915 any cond.also looking for a 1913 twin rear cy.er,muffler and header pipe,push rods,rear tool box,peddle arms and peddle's,cash or trade ?

55. pswonnell@shaw.ca message: I'm trying to trace the whereabouts of my old 1928 Indian ACE sold in the mid 1990s.Last known owner was Dean Rigsby of California.Any leads as to it's present location would be GREATLY APPRECIATED.Also looking for a decent ACE frame and or motor.Thanks George,Pat.

54. bphealey@yahoo.com message: Looking for a 1942 New Jersey motorcycle license plate. Email pics and information to bphealey@yahoo.com Thanks!

53. markSSS@SSSlinkcycles.com message: 1909 Indian Motorcycle News just listed on Ebay. Item # 250142073532. This is Vol 3 No. 6 and includes the 1910 model anouncements.
Also Excelsior Parts book as well as other early literature available.
Thanks
Mark Masa
REMOVE CAPITAL SSS BEFORE AND AFTER @ sign to correct email address

52. robert.moon93@ntlworld.com message: I am looking for an exhaust system front pipe and silencer for my 1947 Gilera Nettuno.I am based in the UK and am happy to pay shipping etc.Any advice on where to find would be werlocome.

51. topdog7825@yahoo.com message: I have two Powell motor scooters and need parts for them if any one can help please contact me? I mainly need engine parts and if you email me please put Powell scooters in the subject line. Thanks, Curt

50. bwilliamsand1@yahoo.com message: Hello, I am in need of a lot of harley b single stuff. I bought a 1927 that pretty much needs everything.

49. jim@guidera.com message: WANTED: Wheel hubs (step style), jiffy stand, 9 bolt horn. All need to be correct for 1937 EL.

48. *lazlobassett@optonline.net message: Looking for 1954 Indian Papoose parts, need front wheel, headlight lens/socket etc... remove stars from email address

47. duda@rduda.com message: Harley Davidson servi. I want to trade a 50s original paint box w/fenders for a box for my 1949. Richard, 802-888-7689

46. ricky47@prtc.net message: wanted, for Henderson 1916, FRAME,TANKS,FENDERS,FORKS,ETC,THANK YOU.

45. atlvandal@yahoo.com message: Lookig for a vl springer front leg and top clamp

44. bigyellowt@yahoo.com message: Thor 1909 orig.paint gas tank Wanted also ex.pipe and muffler,

43. fred@fjwillert.com message: Wanted rear taillight, Air cleaner, dash panel and speedometer for 1938 Harley WLD

42. stefan@ecn.net.au message: wanted 1919-23 harley opposed clutch & brake pedals , kick starter ,rear brake band assembly. thanks peter

41. DPATCH2@KC.RR.COM message: WANTED 1953 PANHEAD CASE OR CASES DAN 913 268 5314 CELL 913 515 3721.41-46 KNUCLEHEAD FRAME . INLINE 45 SPRINGER

40. jsrestore@aol.com message: Looking for any early american motorcycle parts or complete bikes,motors,hubs,wheels,frames, literature especially need parts for restoration of 1914 Crawford 1911 harley 1901 Colorado and also any Thomas motorcycle parts

39. else.larry@towerautomotive.com message: free to any hard working guy. 1939 harley come by towerautomotive Hall Road & Groesbek Clinton Township MI. and get ask 4 larry Else.

38. DPATHC2@KC.RR.COM message: WANTED INLINE 45 SPRINGER BRAZED 1941 -1945 DAN 913 268 5314 CELL 913 515 3721 AND ALSO A 41-46 BIG TWIN FRAME

37. vairlarry@sbcglobal.net message: WANTED : WLD / WLDD CYLINDERS ( F&R )FOR 1941 H.D. GOOD SHAPE-NO BROKEN FINNS / REPAIRABLE ? PICTUERS ?
THANK YOU FOR YOUR TIME AND RESPONCE .
MIKE

36. atlvandal@yahoo.com message: Looking for an offset springer rear leg and any early georgia motorcycle license plates thannks Seth

35. work1000@@@@earthlink.net message: HAVE A SET OF 12 13 EXCELSIOR CYLINDERS W/CARB COMPLETE
LOOKING TO SELL OR TRADE KNUCKLEHEAD PARTS WANTED

THANKS

34. indianfourdoc@aol.com message: 1937-38 original motolamp headlight for Indian chief. Marty. Thanks George!

33. lsrezin@ hotmail.com message: Looking for an original "chum-me" or "buddy" seat with skirt. Any condition of leather is fine. Thanks 608 378 4022

32. mollytina31@yahoo.com message: I have a 1979 kawaskie 650,ltd and i am looking for a carburator for it,i cant find one anywhere if someone has one and would sell it please contact me asap at mollytina31@yahoo.com or call 502-507-1526,or if someone knows where i could find one.

31. chief348(((@)))juno.com message: WANTED; (6-28-07) Looking for a 46 dated coded Knuckle, Big Twin Complete Trans or Case. Have a rare 53 Panhead 3-3 Date Code complete Trans with early no neutral switch -52 Lid and pig snout kicker cover. Will trade or sell for $850. Needs one small stud repair. Lid only has barrel and Kick Cover has one common internal crack. Delete the ((( ))) when emailing.

30. jmsflint@aol.com message: Looking for Indian Prince parts.

29. pigstye13@aol.com message: Wanted. 1941 only 45" clutch release lever and 1941 45 front brake shackle. Also NOS 1940 EL front cylinder (I have the NOS rear )Parts to trade, restoration work or cash. Thanks.......Mutt
(903) 873-6644

28. ALLMETALSR@AOL.COM message: I AM LOOKING FOR THE DASHBOARD COVRER FOR A 64 FL DUO-GLIDE HAND SHIFT,MIRRORS FOR A 64 FL AND THE TOOLBOX FOR A 64 FL DUOGLIDE

27. bigyellowt@yahoo.com message: Looking to buy pre 1916 motorcycle's and part's any make any cond.

26. lqindian@lagere.de.com message: Helo Have the 1912 Henderson motarad for sale wenting Harley knucklehead parts for trade I have pictures wanting 1939 around heads for motorad equal trade or the same.
Corgy, denmark

25. shuvl427@comcast.net message: looking for any 1934 indian a chief scout what ever, prefer a complete or close to complete thanks

24. vennepaul@gmail.com message: Wanted: Oil pump for 1913-15 Indian twin. Also fits 1917 little twin. Any condition. Thanks George, Paul Los Angeles

23. eric@bourgetsflorida.com message: Seeking a Linkert Carburetor for a '41 HD Knucklehead

22. sdjh$$@telusplanet.net message: Wanted for a 1926 H-D J Model. I need a rear rounded spline hub and an original Distributor Cap, even if I could just borrow one so I can have some made. Thank you for any help! Remove the $$ from my email to contact me

21. emanuelpfister@hotmail.com message: Hello
I search a Harley Knucklehead , not a Base case , a original Bike in any condition ....please offer all ...

20. bbop@dblclickit.com message: wanted pre 37 servi car frame rear end also 18 inch. rear wheels trade 1938wld cases matching case numbers ex. vin number no cracks,1935 rlcases same 1936 rld cases same thanks.

19. ironheadhd79@yahoo.com message: looking for ironhead cases or engine

18. vennepaul@gmail.com message: Wanted: For 1916 Excelsior. 1916-1924 Excelsior 61 cu. in. oil pump or parts. Anything. Also 1 exhaust pipe nut, 1 head stay (L shaped 1/4" thick), and one intake cap ring nut( 2 1/4" OD ). Thanks, Paul Los Angeles

17. dkafton@?clearwire.net message: WANTED< I am looking for a good 12 tooth motor sprocket for a Harley "J" boardtrack racer. Any help would be appriciated. Remove the question mark in my address to replay. Thank you, Dave

16. nicola@indian-motocycle.de message: Looking for a complete 1939 Indian Chief engine (or parts like crankcases (set), cylinders, heads...). Thanks!

15. amphib032003@yahoo.com message: looking for parts for a 1923 jd

14. knuck39@yahoo.com message: Wanted for HD VL 30-36. 3 piece Valve cover pieces..(3) of HD part# 174-30B which is the screw in lower piece to the set,which tapers down at the bottom to attach at the lifter block,then steps up and screws into the center portion of the valve cover,and then (2) of 173-37,which is the sliding piece that exstend upwards into the center portion of the valve cover,to the head side.Cash or trade,all leads appreciated.knuck39@yahoo.com

13. grinch@airmail.net message: Want VL shiftgate with reverse for 33 VLE resoration project. Can
send photo of what I am looking for. Thanks. Greg Sveska
Monument CO

12. yorgtat@hotmail.com message: Looking for a 40-50`s conversion kit,from tank shift to foot,not 60`s moustrapp,for old hand shift tranny lid not ratchet.....idealy LEE,but also THORO ,or what have you.....anything interesting,but NOT B&H.......please contact me if you have something to sell....thank you......

11. *garcia_r@msn.com* message: WANTED: OEM HARLEY NARROW STRAP FRONT FENDER FOR BIG TWIN, MUST BE SOLID & STRAIGHT. Ray 330-799-3738 CA$H WAITING

10. LUCKY461@ADELPHIA.NET message: WANTED THE SHORT FLANDERS SPRINGER RISERS APPROX. 2 5/8" THAT FIT ON DOG EAR TOP CLAMP.ALSO WANTED THE FLANDERS INVERTED OR ANGLED RISERS THAT THEY USED ON THE OLD RACERS.TOP DOLLAR PAID... ALSO LOTS OF PARTS TO TRADE

9. jefftiernan@yahoo.com message: wanted 24 henderson delux frame and rear wheel,gas tank, handlebars.

8. bigyellowt@yahoo.com message: 1912-1915 Pirate twin motor cycle or motor Wanted!,can in any cond. please email photo and price if possible ? have money or trade also looking for unrestored 1912 Henderson 4

7. esmcsm7304@att.net message: I'm looking for a '52 - '53 Chief 289R amal carburetor or any parts
like air cleaner adapter, manifold adapter, mounting bracket, ect.
Thanks

6. indianfourdoc@aol.com message: Wanted: 1938 or 1939 Indian Chief, frame, front end or complete chassis. Cylinders with casting numbers 85998 and 85996 for motor build. All 38-39 sheet metal. 1938 terminal strip that mounts to rear fender. Inner primary and script primary cover. Marty. Thanks George!

5. ebuyou@dm-tech.net message: Looking for people or museums that own a 1942 Harley-Davidson Model XA. I am writing a book about where these bikes have gone since the end of WWII. If you have one or know where one is and would like to be considered for inclusion in the book, please E-mail me or call Ron at (530) 824-9053. 11 June 2007. Thanks George!

4. ebuyou@dm-tech.net message: ebuyou@dm-tech.net message: Looking for an NOS (or really good used) Harley-Davidson XA skidplate. Anybody have one? Thanks George! E-mail me or call Ron at (530) 824-9053. 11 June 2007.

3. ebuyou@dm-tech.net message: Looking for an NOS (or really good used) Firestone Sportsman 4.50 x 18 tire. This is the one with the + tread design. Anybody have one? Thanks George! E-mail me or call Ron at (530) 824-9053. 11 June 2007.

2. ziggy@ziggysmotorworks.com message: Wanted to buy :NOS mlitary indian 640 parts
im collecting to finish a nos 640 military 45"scout
ziggy 360 871-8120
www.ziggysmotorworks.com

1. stefan@ecn.net.au message: wanted 1925 indian prince foot peg rubber . thanks peter

April 2007

111. jmsflint@aol.com message: Looking for Indian Prince parts.

110. bigyellowt@yahoo.com message: Wanted to buy any one off's 1930's hand made art deco,alum.or steel bodied streamline looking Motorcycle,running or not,

109. bigyellowt@yahoo.com message: Looking to Buy pre 1916 motorcycle any brand any cond.single or twin,orig.barn fresh if possible? belt or chain drive,also parts and related items.

108. grinch@airmail.net message: Wanted: VL shiftgate with reverse for 33 VLE & sidecar restoration.
Need it for July 4th parade. THanks. 817 683 8191

107. tmartley@aol.com message: Wanted; 1946 harley u model 74 engine, original or restored

106. ken@cheersamp.com message: !917 Harley Davidson, all parts wanted to restore project. Complete motor etc. Motor is 7/9 horsepower and this model ran until 1919.
even sidcar peices. all parts considered. even a complete bike. we are in australia and happy to look worldwide, ken

105. rudedogdot@aol.com message: looking for rt side lid for 83 flht

104. sms@cgmtech.com message: Looking for complete 1951 original harley hydra-glide front end, plus any other parts related to this year.


Norm

103. chief348@juno.com message: Wanted 5-3-07; Need 1946 Knuckle Springer Offset original bars. Have an original CHROME 1947-1948 Springer Cycleray Headlight perfect for an unrestored machine. Trade or sell outright for $500. Has some dings and minor dents and a patina on the chrome that probably would not be suited for a restoration. Cycleray Glass is original and has all correct markings.

102. 36knuck*@sbcglobal.net message: Need HD UL parts such as left UL flywheel, UL rear cylinder, UL rod set and 47-48 UL gas tank. Have parts to trade- UL frt. cyl.,cam cover,pan gas tanks, other parts. Email without asterisk(*) or call 210-533-0111.

101. ebuyou@"dm-tech.net message: Need a front and rear fender for a 1942 Harley-Davidson Model XA. Take out the " for reply. Thanks George!

100. valron@atlanticbb.net message: WANTED:LOOKIN' FOR AN ORIGINAL BASE WITH SOCKET AND PIGTAIL FOR MY KNUCKLE BEEHIVE TAIL LITE. THOUGHT I HAD A COMPLETE LITE AND FIND OUT MY BASE HAS DISAPPEARED. ANY HELP WOULD BE APPRECIATED. E-MAIL OR PHONE ME AT 814-749-8070. ASK FOR RON. THANKS.

99. pigstye13@aol.com message: Wanted. 1941 only 45" clutch release lever and 1941 45 front brake shackle. Parts to trade, restoration work or cash. Thanks.......Mutt
(903) 873-6644

98. pigstye13@aol.com message: WANTED: Need a NOS in the package 45" low gear. Part # 35275-41 (old # 2294-41) Don't want a repop. They suck. Lots of vintage HD stuff to trade or cash. Thanks..................Mutt (903) 873-6644

97. iwork4kikes@yahoo.com message: Hot FlatTrack Racing SHOES for any american make of motorcycles, prefer special make that will fit clubfoot. see example here > http://www.youtube.com/watch?v=wCF3ywukQYA < .......George thanks for the site! Its almost June,why the APRIL listing still? Must be on Vacation. 5/25/07

96. thelooseendsband@gmail.com message: WANTED: unrestored 1948-52 SW OEM Harley Speedo: Have a 1956, 1958-61 OEM SW speedo to trade, or will buy yours outright.
My cell phone: 417-276-9908 or
thelooseendsband@gmail.com

95. softtail5@hotmail.com message: i need a gas/oil tank for a 15/18 excelsior? thanks curtis

94. bikebag@itwtrading.com message: Buying good used old, NOS, or new production Linkert carburetor parts. Also need rebuildable cores and bodies with NO body damage or bad threads, complete or incomplete, all models.( NO helicoil stuff.) Thanks. Mike

93. theknucklehead@hotmail.com message: I am in desperate need of a CHROME HARLEY SPRINGER CYCLERAY HEADLIGHT with the guide in script(preferably restored). Also need a 1948 HARLEY KICKER COVER with the raised numbers and 1947-1950 HD TANK EMBLEMS in good to excellent condition.
$$$$$ WILL PAY TOP DOLLAR $$$$$

92. **hd65flh@comcast.net** message: Looking for OEM rubber handlebar grips for my 49EL. (plz remove asterisks to reply...thx)

91. mplanet9@aol.com message: Wanted: Looking for a HD (U Model) U, UL, ULH to restore, own, keep. I would prefer an intact frame and engine and restoration quality is OK as long as it is reflected in the price. If you have one please contact me at mplanet9@aol.com. Thanks for the posting George.

90. celticbloodcycle@hotmail.com message: Looking for a vespa project; hopefully 50-60's model
barn fresh, seized, damaged not a real concern
pictures and asking price thanks

89. vennepaul@gmail.com message: Wanted: Musselman or Early (1913) Corbin rear hub for 1913 Excelsior belt drive. Am also interested in shell if that is all you have. Musselman hub is stamped with Excelsior name around center of hub. Also need most linkage parts and intake valve parts for 1916 Excelsior. Thank you George! Paul V. 562-4942811

88. theknucklehead@hotmail.com message: Looking for a Harley 1948 Kicker cover. Also 1947-50 Harley Original tank emblems in excellent shape. Thanks George!

87. oldmtrcyc@msn.com message: Wanted: Tanks and fenders for 1939 knucklehead.

86. atlvandal@yahoo.com message: I am looking for a 1957 georgia motorcycle tag. please let me know if you have one for sale. Seth

85. wjkn45@yahoo.com message: hi was wondering if that yellow &white panhead was forsale if so is it a 62 and how much are you asking for it thank you.

84. montana-indian@hotmail.com message: I WILL TRADE A BEAUTIFUL RESTORED 1946 HARLEY WL FLATHEAD MOTORCYCLE FOR INDIAN PARTS OR PROJECTS..406-434-2005

83. boudrot@hotmail.fr message: I'm looking for a flat twin engine for Indian circa 1913. Thanks, Stephen

82. INJUNWAYNE@CS.COM message: I NEED A RIGHT TANK BADGE OR A PAIR FOR A 41 KNUCKLE BARN BIKE. I ALSO NEED THE FRONT TRIM PIECE FOR THE LEFT TANK, A SPEEDO THAT IS WORKING AND NEVER BEEN APART, & THE LICENSE PLATE GLASS WINDOW FOR A BEEHIVE TAIL LIGHT. THANKS GEORGE!!!! I AM ON EASTERN TIME. INJUNWAYNE 540-854-8501

81. 4cylchevs@xcelco.on.ca$$ message: SOMEONE PLEASE HELP - still looking for the few remaining items for my 1914 excelsior single belt drive. I need gas and oil caps, gas petcock, tank fittings ( or complete tank ), tank straps, idler spring, exhaust nut, corbin brake hub nut, eclipse clutch stationary arm, eclipse clutch operating arm, spark advance lever, idler stud.
also still looking to find other owners of this year and model for correspondance, as well as a breakdown of excelsior single serial numbers. thanks in advance and a big thanks to george. remove $$ from email address - aka hawg

80. topjimmy@mnsi.net message: for sale; 1956-1961 speedometer faces, glass back screened in original green color, these are the finest anywhere.asking u.s.$40.00 each.thanks george.

79. luke2007@mail.goo.ne.jp message: looking for knucklehead full wheelcover Front&Rear.48 motor &transmission with clear title.

78. ebrown@pgonline.com message: Wanted: Harley 1920 W opposed Sport Twin parts - Magneto Bosh BA2, exhaust and toolbox. Thanks, Eldon

77. softtail5@hotmail.com message: i need a 15-18 excelsior gas/oil tank. solid rusty or crusty? come on guys some of you have one around that you are not going to use. thanks curtis

76. gkottsick@yahoo.com message: desperate need 1967 clutch shell,primary chain & engine sprocket.Its keeping me from riding.Any help greatly appriciated.gkottsick@yahoo.com

75. vennepaul@gmail.com message: Wanted: 1915-16 Excelsior parts. Other years may fit. Need intake valve parts. Valve spring covers. 1915 serial crankcase and transmission case. 1915 rear brake. Auction went sour and I lost a bunch of parts. Thanks, Paul 562-4942811

74. 100scoot +@+charter.net message: i got a big twin front brake shackle to trade for a forty five inch one
this ones like nos
remove the ++ to email me

73. 100scoot +@+charter.net message: how the hell do you guys post here without getting the stupid oops 30 yrs or older crap??????

72. 651.svensson@telia.com message: Wanted:Saddlebag glass reflectors, 4 green and 2 amber.Top dollar paid.Thanks...Stefan

71. brianchidsey@yahoo.com message: Looking for an original 1965 FL. Must have all the dressing with it. Either old restoration or original paint considered. Have Cash money! Prefer you to be in Great Lakes Region. Thanks George !!!

70. theknucklehead@hotmail.com message: Looking for an Original Harley 1940's front fender light in good condition. Also need a Harley 1948 transmission kicker cover with the number plate. Any help or leads appreciated. Thanks

69. jjeno2@*yahoo.com message: Looking to buy or trade for bosch zev magneto for 21 HD
also need magneto gear case for same
I have gear case and generator with coil and points cover to trade
I am going to build f model no electrics
Thanks
leave out the * in email

68. sdjh$$@telusplanet.net message: Wanted for a 1926 H-D J Model. I need a Schebler DLX12 Carb and original Distributor Cap. Thank you for any help! Remove the $$ from my email to contact me.

67. bowlesjeff@hotmail.com message: I need #4675-52 it is the star shaped spring washer for the bottom of the steering damper 54-65 k model and XL , XLCH, XLH
Thanks

66. ponykeg@earthlink.net message: Need a working original speedometer for a 52 panhead. Thanks. Cary.

65. mscottharley???@sasktel.net message: Wanted- 1936-1940 Harley 45" outer primary cover.NOS to good condition.Cash or trade.Remove ??? from email.
Thanks....Scott

64. bentleg@optusnet.com.au message: I AM LOOKING FOR 1915 HARLEY GEARBOX CASE HAVE 16 TO SWAP AND SOME EARLY PARTS

63. indianchief1947@hotmail.com message: WANTED ENGINE CASES FOR A 1923 INDIAN CHIEF 90VXXX NUMBERS .ALSO CYLINDERS NON DETACHABLE HEAD TYPE FOR THE 74 CI CHIEF. WHAT HAVE YOU GOT THAT IS GOOD
THANKS MARC

62. indianchief1947@hotmail.com message: I AM LOOKING FOR REPORDUCTION ENGINE PARTS ETC FOR THE EARLY 1920'S INDIAN CHIEF. WHO DO YOU KNOW MAKES OR SELLS THESE PARTS. EMAIL ADDRESSES WOULD BE GREAT. THANKS
MARC

61. bigyellowt@yahoo.com message: Wanted to buy 1912 Emblem twin gas tank and twin manifold to finish bike,also have some other old MC parts for trade

60. brianchidsey@yahoo.com message: Looking for an original 1965 FL. Must have all the dressing with it. Either old restoration or original paint considered. Have Cash money! Prefer you to be in Great Lakes Region. Thanks George !!!

59. fox.danny@sbcglobal.net message: 1948 harley panhead basket or restorable.

58. friedenstab@shaw.ca message: Wanted;Cheap basket 1947 basket fl #ed case side for insuring my bike,my #s were messed with Thanks George

57. hogluvr1340@yahoo.com message: Wanted: Harley Davidson Inline Springer Handlebars, cash or have some small WLA parts to trade, Thanks George!!

56. pcaputo@voitco.com message: anyone interested in a 1941 schwinn flyer? trade for harley parts or sell. email for pics thanks

55. bigtreebluesea*@earthlink.net message: Wanted for 1940 Canadian 640: original 640 data tag, a usable left side engine case with any serial number from FDO 1517 to FDO 2067. Also need the smaller round, flat aircleaner assemby similar to some civilian Scouts. Please remove * from email address. Thanks, George!

54. theknucklehead@hotmail.com message: Looking for an ORIGINAL 1940's Harley front fender light in good condition. Also need a 1947 California license plate in good to excellent condition. Any help or leads appreciated! Thanks

53. indianfourdoc@aol.com message: Wanted: 1938 Indian chief cylinders, heads,frame, forks, or complete chassis. Marty

52. DEWGARINC@AOL.COM message: HELP NEED PISTON,RINGS, WRIST PIN FOR 1926 HARLEY B MODEL SINGLE CASH WAITING THANKS DEWEY EMAIL ME OR CALL 1-207-926-3358

51. theknucklehead@hotmail.com message: Looking for an Original Harley front fender light, 40's era.
Also need a 1947 California motorcycle license plate in very good condition.

50. atlvandal@yahoo.com message: hey I am looking for an avon speedmaster 2.75 x 21 please let me know if you have one. Not the 3.00 x 21 I can get those easily. thanx

49. host@harleyhummer.com message: WANTED:

HARLEY DAVIDSON HUMMER, SCAT, PACER, SUPER-10, 125, 165, Ranger and Bobcat parts. NOS, USED, basketcase, etc. Top dollar paid!
Be sure to visit WWW.HARLEYHUMMER.COM

48. aprilfedelesmith19803@yahoo.com message: 1972 FLH inner primmary chain housing

47. mark(@)linkcycles.com message: Wanted for 1913 Harley Single Motor. Gearcase, Gearcase cover, cylinder, flywheels and conecting rod. I basicly just have a set of cases and want to put together a motor.
Thanks
Mark Masa
330-722-2241

46. 1mbwlc@verizon.net message: HI,

Looking for original parts (NOS or take off) for 1942 H-D WLC (Canadian Military Model):

- Windshield complete assy - Part No. 11292-36NC
- Tandem (Buddy) seat complete assy - Part No. 11235-41N
- Front marker light complete assy - Part No. 4901-41AN
- Horn & bracket complete assy - Part No. 4800-42M

Thank you, Prem (PA, USA, 570-476-6834)

45. tbarlett@earthlink.net message: Looking for a 57 or earlier Servi-car.Original,restored,project or parts.What do you have?"tbarlett@earthlink.net" 913-271-4812 Tom

44. pigstye13@aol.com message: Wanted. 1941 only 45" clutch release lever and 1941 45 front brake schackle.Parts to trade, restoration work or cash. Thanks........Mutt

43. softtail5@hotmail.com message: needed set of side car springs pre 1940. thanks curtis

42. fred@fjwillert.com message: Wanted Stock tailight for 1938 WLD. Solo seat for 1938 WLD

41. softtail5@hotmail.com message: Wanted: Schebler GX2, GX5 or GX11 for indian prince. also need a gas tank for a 15-18 excelsior, excelsior 14 front end. thanks curtis

40. softtail5@hotmail.com message: Wanted: Schebler GX2, GX5 or GX11 for indian prince. also need a gas tank for a 15-18 excelsior, excelsior 14 front end. thanks curtis

39. redfernmotorparts@bigpond.com message: Harley-Davidson 1939 EL motor needed, for a correct 1939, that has had a flathead motor put into it. If anyone can assist, it would be appreciated. Thankyou, and thanks George. Please e me at redfernmotorparts@bigpond.com

38. chief348xx@xxjuno.com message: Wanted; want to find someone who needs a space at Oley this coming week. I have an extra one. Delete the xx xx when emailing.

37. yorgtat@hotmail.com message: Looking for a pair of megaphone/bell tip/cocktail shaker mufflers,dont mind short or long tip,interested in any condition as long as the tips are the removable type and they are not dented.....as they will be painted and fitted on an old HD racer/bobber....please contact me if you have a set to sell,i am in Europe...thank you..........

36. info"@"ace-ltd-usa.com message:


B U Y E R W A N T E D F O R : 1955 Harley Panhead complete and all original parts. Go to www.ace-ltd-usa.com/1955
35. JBABCHAK@TRIBUNE.COM message: Sportster Trike Frame Wanted- Jim 917-355-6903 Thank you- leads appreciated...

34. valron@atlanticbb.net message: WANTED: ANY ONE OUT THERE WITH AN OLD KEY FOR MY FAIRBANKS-MORSE MAG? NUMBER IS "LL-302". ANY HELP WOULD BE MUCH APPRECIATED. E-MAIL OR PHONE ME AT 1-814-749-8070. THANKS, RON.

33. atlvandal@yahoo.com message: looking for a avon speedmaster 2.75x21 also looking for a 55,56 or 57 panhead engine or just the cases.

32. dks60@sbcglobal.net message: Wanted: Front fender for 1947 45 Solo. Thanks George!

31. pigpen11@hotmail.com message: Wanted: Lower fork bracket for adjustable triple trees. Part number is 45707-50. For panheads and later. I can email pixs if you need them. Thanks George

30. thelooseendsband@gmail.com message: WANTED: 16" drop center rims for WL?G 45..(Kelsey-Hayes 470 TA)...chrome, painted, I don't care, but must have the correct spoke angle for the 45 hub....wheels already laced up to 45 hub would be great! Would be interested in any WL/solo stuff! Email: thelooseendsband@gmail.com Thanks George!

29. thelooseendsband@gmail.com message: WANTED: for 1949-52 WL/G inline springer handlebar, 1947 Harley speedo (repop face OK), 1948-52 HD speedo (repop face OK), front 3-pc fender (side brace) 1947-49 WL....any other WL parts you might have..I would probably buy all! Thanks to George and to all in advance. email: thelooseendsband@gmail.com

28. bikebag@itwtrading.com message: LINKERT Carburetors !!!!! I restore Linkerts and always need cores for rebuilding as well as your misc. NOS parts kicking around. All models. Email Mike at bikebag@itwtrading.com with parts & prices for an immediate yes/no. Payment by paypal, check, M.O. upon receipt. Shipping also reimbursed. Not interested in repro parts unless in bulk, as I already carry every part reproduced today.

27. JOHNCAMP@INDY.RR.COM message: Electrical key switch and fuse box with buzzer assembly for my 1923 jd

26. apache@on2k.com.au message: 49-53 Ridgid Panhead Harley OEM rear fender Wanted" Can repair Busted or dusted Stuff

Have 53 Pan Tanks to trade?

25. pedrojsc@hotmail.com message: I am interested in Henderson deluxe Models unrestored condition. Indian scout 1920 to 1932.mostly 101 scout.I am located in europe and i can go to USA to pick the bike.

24. bbinns@kubota.com.au message: Wanted: Excelsior Big X Parts (1917-1924). Any parts considered, but mainly after cyclinders, cam and timing gears, timing cover, front and rear hubs, gearbox parts and oil tank/tool box. Thank You
Email: bbinns@kubota.com.au

23. softtail5@hotmail.com message: wanted: front end for 14 excelsior, excelsior 15-18 gas tank solid or rusty and crusty.

22. agriffis400@charter.net message: I need a ignition coil and retifier for a 1 horse power mcculloch amf roadmaster moped made in 1981.. Thanks Archie

21. DPATCH2@KC.RR.COM message: WANTED 1949 GLIDE FRONT END AND A 1950 WISHBONE FRAME MUST BE STOCK DAN 913 268 5314 CELL 913 515 3721

20. onwellerm@aol.com message: looking for 1935 to 1947 harley for restoration can be called @810 245-7085 usa only

19. dande@svtv.com message:
Wanted 1947-1948 Original Harley Lock-tite saddlebags,. Also want squashed bird emblem that goes on top of front and rear fender of 1942 Harley. Also need 130 MPH Indian speedometer. Any leads apprectiated, I know above items are tall order but they are out there. Thanks George>

18. vennepaul@gmail.com message: Wanted: 1915-1916 Excelsior 61 cu. in. parts. Correct rear brake for either year. Exjaist valve spring covers. Intake valve parts, all. Brake and clutch pedals and linkages. Midco mag-generator. Thanks, Paul

17. vennepaul@gmail.com message: Wanted: 1915-1916 Excelsior 61 cu. in. parts. Correct rear brake for either year. Exjaist valve spring covers. Intake valve parts, all. Brake and clutch pedals and linkages. Midco mag-generator. Thanks, Paul

16. bigyellowt@yahoo.com message: Looking to by early Am. Motorcycle and parts any brand pre 1916 running or not twin belt drive perfered also good running 1938 Indian 4 ,can pick up at Oley. please email photo and price if possible ?

15. jpatrick@mountaincable.net message: Need open frame Bosch magneto. Known as plain bearing circa 1908-1911 for Indian 5 HP. Have the rest of bike. Want to get it running for 2008. Any help is appreciated. John Phone 905-574-8958

14. devidoldmoto@yahoo.it message: Hello
I look for two cylinders under good conditions for a 1928-29 Harley JD model, contact in email to devidoldmoto@yahoo.it
Thanks George

13. iwork4kikes@yahoo.com message: I pay the most, call me last, anything,toomuch money.

12. tomjg62@sbcglobal.net message: Looking for Pre 1969 big twin motor. Would take tranny and drive train if available. I would prefer a 74 knucklehead, 74 or 80 flathead, or a 74 panhead. Motor does not need to be complete, would take cases with the title.

11. dvallone1@verizon.net message: 1973 Harley Davidson FX Superglide, restored preferred,all considered. no chopped or bobbed. small tank with single speedo guage bar mounting. large single brake calipers frt & rear.

10. blbossiersr@aol.com message: Rider/collector wants to buy: 1929 Cleveland Four Toronado or Century; 1929-30 K Models. Willing to pay for top condition. Call 318-443-5686x154 anytime or leave message.

9. henderson@c.dk message: Ner A Car and Emblem motorcycle, and all parts for this.
Thanks George

8. BPRM@JUNO.COM message: 1941 WLA PARTS NEEDED...COMPLETE SPRINGER...HANDLEBARS AND TOP CALMP...CHAIN GUARD...ALUMINUM HEADS...REAR FENDER...18 INCH WHEELS OR JUST THE RIMS....I HAVE 16 INCH COMPLETE RIMS AND HUBS LACED ON THERE NOW....WANT THE 18 INCH ONES...GENERATOR WAL STYLE 6 VOLT OR A 12 VOLT CONVERSOIN IN THE CORRECT MODEL 32 FRAME..GIVE ME A LIST OF WLA PARTS YOU HAVE...IVE GOT A 35 I BEAM 45 SPRINGER AND OTHER PARTS TO TRADE AROUND WITH YOU IF YOU NEED WHAT IVE GOT....NO JUNK PLEASE!!/..CALL 314 583 1037.......THANX GEORGE!!

7. 1qazaq@adelphia.net message: I need ul alloy heads, front & rear any condition, broke fins,chromed or drilled. 1qazaq@adelphia.net

6. poppa69@sbcglobal.net message: Wanted,good useable kicker for early 40's Chief. poppa69@sbcglobal.net

5. copperguy@snet.net message: Wanted '55-'59 FLH panhead complete. Restored or restorable. matching #'s

4. slugbiscuit@yahoo.com message: Wanted: 1912-1915 Indian two cylinder motor--complete.(602) 569-2394 Slugbiscuit@yahoo.com

3. lsrezin@hotmail.com message: Looking for a horizontal cross bar for mounting a windshield to a 1948 Chief.( fastens to forks) . Also trying to find some old fender trim , the four long narrow strips that bolt to the sides of the fenders. Any condition.

2. wagg04@yahoo.com message: Parts wanted to fit a 1969-72 JAWA 350 twin......right side cover, airbox and snorkel, finned carb cover, and black plastic-headed key. Please respond with asking price(s) and condition description. Thanks.

1. couper33@neo.rr.com message: 59606-82 and 62044-82

March 2007

77. portapotti@prexar.com message: I need a 1913 Harley twin frame. Dig in your Great Grandpas cellar and help me out. Email or phone Dave at 207-695-2500. Frame must be sound and useable. Thanks George for the best site.

76. ironcountychoppers@yahoo.com message: WANTED; PISTONS FOR 1923 J-JD ,, I NEED 2,, Thanks

75. ironcountychoppers@yahoo.com message: WANTED; J-JD 74ci. PISTONS FOR 1923 , I NEED 2 ,thanks george

74. pigstye13@aol.com message: WANTED
Need a New Old Stock 5 fin FRONT cylinder for my 1940 EL.
I have a NOS rear cylinder and need the matching front.
I have a cherry SET of NOS 1948-52 Panhead EL cylinders I would like to swap. Please NO sleeved/repaired stuff. NOS mint condition only................Mutt (903) 873-6644

73. bbop@dblclickit.com message: wanted buco saddle bag.is 1957 buco cat. need right side leather part number 1591 with fringe thank you

72. ATLVANDAL@YAHOO.COM message: LOOKING FOR A IMPERIAL PRODUCTS FINNED PRIMARY COVER FOR PANS AND KNUCKS THANK FOR ANY INFO

71. bigyellowt@yahoo.com message: Wanted barn fresh Flying Merkel or Harley in any cond. 1915 or early Please email photo and price.

70. allsure@bigpond.net.au message: G'day from Australia!
Wanted 1942 Harley WLA springer handlebars complete, front and rear wheels and a complete set of handlebars for a 1924 Indian chief.
Thanks Ian

69. chrisbaeck@gmail.com message: hey, im looking for a Panhead engine or cases with clean and good numbers or a shovelhead engine or case up to 1974 clean and good numbers<. thanks

68. frazer.jelleyman@tbwa-london.com message: HARLEY WLA 45 WANTED.Civilian models only. Must be a runner but apart from that will consider any condition.

67. proto60pan@mchsi.com message: WANTED: NOS or near NOS GOODYEAR 500-16 SUPER EAGLE 100 blackwall tire(s). Brad (563)320-2014

66. hogluvr1340@yahoo.com message: Wanted: Front & rear wheels, brakes and fenders for a Harley Davidson WL Solo. Also looking to trade a set of 1947 cases in very good condition for a set of 1940 cases in similar shape.

65. mscottharley???@sasktel.net message: WANTED- FOR 39 HARLEY 45".. 35-40 TOOLBOX MOUNT #3467-35. ALSO NEED ORIGINAL RECTANGULAR TOOLBOX AND ORIGINAL 34-39 FRONT FENDER,39-40 REAR FENDER. CASH OR TRADE.REMOVE ??? FROM EMAIL.

64. obsurfer67@yahoo.com message: Looking for 1947 Massachusetts motorcycle plate. Please email if available or thoughts on who to contact

63. bobrakestraw@people*pc.com message: 57 xl original exhaust or parts, trumpet horn. 41-45 HD B/T frame[uncut neck],tanks,speedo.36-39 Chief frame. Have HD and Indian trades. remove * when responding by email. Thanks Georges World.

62. apache@on2k.com.au message: Looking for a OEM Panhead ridgid Rear fender 49 onwards Can work with Metal , Required for a 50 Pan Project

Regards Grant

61. RABFAB1@MAIL.COM message: LOOKING FOR INDIAN SIDECAR FRAME, 1940 AND LATER, ANY CONDITION, DO NOT NEED BODY OR FENDER, EMAIL ME AT RABFAB1@MAIL.COM THANKYOU ALSO NEED 65 AND DOWN FLH FIBERGLASS SADDLE BAGS AS WELL AS 1965 SMOOTH TOP BUDDY SEATS , ANY COLOR IS FINE, ALSO NEED INFO ON THE S&M OVAL LIGHT COMPANY, THINK THEY WERE IN BUSINESS DURING 30s and maybe 40s thankyou

60. RABFAB1@MAIL.COM message: LOOKING FOR INDIAN SIDECAR FRAME, 1940 AND LATER, ANY CONDITION, DO NOT NEED BODY OR FENDER, EMAIL ME AT RABFAB@MAIL.COM THANKYOU

59. dave905@hotmail.com message: wanted rear stand for indian jr scout also front fork stem need these to part bike back on the road i am in the uk

58. cyclespast@vermontel.net message: WANTED.....PRE-1930'S AMERICAN MOTORCYCLES AND PARTS/ACCESSORIES
ALSO WANTED TO BUY FAM AWARDS/MEDALS,,,,,,,,,MOTORDROME/BOARDTRACK MEMORABILIA
CYCLESPAST@VERMONTEL.NET.....802-885-6553......SCOTT

57. meeksemily@wild blue.net message: looking for a mustang motorcycle, complete, to restore. 1950 to 1965 . Prefer a poney or a stallion, will consider a thourbred. thank you.

56. softtail5@hotmail.com message: looking for a gx2, gx5, gx8 or gx11 carb for my 1926 indian prince. complete please if you have floor boards, exaust, generator guard or battry box can use them also. also want a front end for a 1914 and 1919 excelsior. any help out there

55. pcaputo@voitco.com message: wanted 1966 right side case in good to excellent condition. thanks

54. valron@atlanticbb.net message: wanted:lookin' for someone that makes keys or has knowledge of anyone that can make me a key for a fairbanks-morse magneto for a old sportster. any help would be appreciated. e-mail or phone at 1-814-749-8070. thanks, ron.

53. valron@atlanticbb.net message: WANTED: I NEED A GREEN TURN SIGNAL INDICATOR LENS FOR MY '65 PAN. THESE ARE THE ONES THAT GOES BEHIND THE HEADLIGHT NACELLE. WILL TAKE WHOLE ASSEMBLY OR BOTH IF NEED BE. NEED IT TO FINISH MY '65 ELECTRAGLIDE. ANY HELP WOULD BE APPRECIATED. E-MAIL OR PHONE ME AT 1-814-749-8070. THANKS, RON.

52. bhamster@comcast.net message: Wanted, Anything whole or part 1936 Indian Chief. Thanks 360-815-4426 in Bellingham Washington.

51. drewehe@verizon.net message: WANTED 34-39 INDIAN CHIEF.. WILL CONSIDER OTHER YEARS.
ALSO LOOKING FOR HARLEY DAVIDSON U , UL,US,UH,ULH,UHS.
CONTACT VIA EMAIL
DREWEHE@VERIZON.NET

50. Dpzoller@aol.com message: Wanted, original stock swingarm frame for restoration of a 1962 Panhead. Contact Dennis at 806-352-0305 or Dpzoller@aol.com

49. nhenderson63@aol.com message: WANT TO SWAP ONLY..... Corbin speedo head, 100mph dial, internally lit,optional max speed recording hand, working condition restored 5 yrs ago, swap for a 80mph dial version in same condition with same extras.
Thanks.

48. nhenderson63@aol.com message: DAYTON parts for 1914 single speeder or original literature. Interested in all bits incl. Spacke engine etc etc.
Thanks.

47. rustyscooters@hotmail.com message: I am looking for a pair of late 51 or very early 52 panhead FL cylinders for my 52 FL TT project. I am also looking for a worn but useable solo seat.Any help is greatly appriciated.I have lots of pan,knuckle and flaty parts if you would rather trade than sell out right.

46. curleejim@pitel.net message: Wnated For a 1965 FL: Choke lever assembly, shock covers, round long stem mirror, and a rear bumper. All have to be in very good, or better condition. Thanks Jim

45. bigyellowt@yahoo.com message: $$Wanted to Buy $$ Pre 1916 twin or single ,street bike or racer,any brand in orig.cond.running or not,just out of a barn,can pick up anywere in the U.S.,email photo and price if possible ? or call 530 823-7870

44. bigyellowt@yahoo.com message: Wanted to Buy 1930's streamline Artdeco looking motor cycle anymake,anysize with history, even home made one off's ,alum.bodied Rocketship Airflow futuristic looking. please send photos and price.

43. jpierce@trical.cl message: Wanted: 1931 V parts. Anything you may have.

42. duda@rduda.com message: NERACAR, wanted info on the nera car. I am gathering info about the bike and would like to find one for sale. Call 802-888-7689 or duda@rduda.com

41. sdjh@telusplanet.net6 message: Wanted: Schebler DLX12 or HX160 for 1926 H-D J Model. I also need a Distributor Cap for same. Please help me out if you can, I appreciate it and need it. Remove the 6 from my email. Jim.

40. jogo03@comcast.net message: hey i am looking for some side car parts they are brake cross over shaft 87688-39 , left cross shaft arm 87674-39 right cross shaft arm 87681-41 backing plate arm 87676-36 brake lever link 87685-30. i sell on ebay at tamale38 i am wheeling to do some horse trading. thanks and happy trails

39. bigyellowt@yahoo.com message: Wanted Parts for 1930 Super X ,rear stand and clip,rear luggage rack,gas cap for 1929 Indian 101 Scout fenders,chain gaurd,rear stand,for 1920 Indian Scout,handle bars,chain guard,rear fender,rear stand,set of 20 in. tires,tank decals,For 1913 Jefferson frame,forks and handle bars, have parts to trade

38. brianapryl@verizon.net message: Looking to start an EL project, year not important. looking for at least a decent set of cases or more if you have it. Thanks

37. henderson@c.dk message: EMBLEM parts for the little model about 1917-1920

36. henderson@c.dk message: INDIAN model K or O gearbox.

35. redfernmotorparts@bigpond.com message: JIFFY STAND, OR SIDE STAND IF YOU PREFER, WANTED FOR A HARLEY-DAVIDSON, 1930 to 1936 VL MODEL. IF YOU CAN HELP, PLEASE EMAIL ME. THANKS, AND MANY THANKS GEORGE. TONY. redfernmotorparts@bigpond.com

34. DPATCH2@KC.RR.COM message: WANTED 50 OR 53 PANHEAD FRAME ORIGINAL DAN 913 268 5314 913 515 3721

33. DPATHC2@KC.RR.COM message: WANTED 50 OR 53 PANHEAD FRAME ORIGINAL DAN 913 268 5314 913 515 3721

32. bmon30@insightbb.com message: Wanted for 60 XLCH Front section of 2 into 1 High Pipe for rust repair. I need the bent front cylinder section or a damaged, partial ,or complete high pipe to repair my rusted one.Dents are OK
Thanks , Bob Montgomery 859-278-1499 bmon30@insightbb.com

31. knabbefeldt@charter.net message: Wanted for 1929 DL, front brake shackle part # 4130-28 has casting # QE-8341 and front brake arm #4123-28A,also connecting rods with casting #QA-705T & QA-706T

30. donvito17@comcast.net message: WANTED: 1938 INDIAN FOUR CYLINDER MOTORCYCLE ---Must be Excellent Runner (No Smoke/Leaks) with Recent Professional Restoration ---
Matching Serial Numbers---No Made Up Bikes, Please---I am looking for a Top Quality 1938 Four---Thank You For Any & All Leads---Mike
(916) 962-2942
P.S.---Thank You, George!---You have a Great Site!!!

30. donvito17@comcast.net message: WANTED: 1938 INDIAN FOUR CYLINDER MOTORCYCLE ---Must be Excellent Runner (No Smoke/Leaks) with Recent Professional Restoration ---
Matching Serial Numbers---No Made Up Bikes, Please---I am looking for a Top Quality 1938 Four---Thank You For Any & All Leads---Mike
(916) 962-2942
P.S.---Thank You, George!---You have a Great Site!!!

29. ronniecox@peoplepc.com message: needed 1940 stewart warner speedometer face? used-new don't care

28. thtileworks@mwt.net message: Parts for my 1945 H-D LE sidecar. Need a REAR RECOIL CHECK ASSEMBLY, part#6551-31; Front moulding strip,non-plated for painting; "Beehive" red glass lens for fender running light. Thanks, Andy in Wisconsin thtileworks@mwt.net
608/562-3429

27. elemore.3@virgin.net message: Wanted - harley motor cases 1928 or 1929 must be matching cases with ggod numbers,
email pictures and price,
thanks - John

26. elemore.3@virgin.net message: Wanted - decal/transfer kit for 1928 henderson deluxe,
must be 100% accurate.
thanks George!

25. hydraglide51@tiscali.it message: I'm finding one speedometer originates them in good conditions, "cheaper price if is possible!", for harley davidson WLA Liberetor of 1941
Tank you George

24. 1qazaq@adelphia.net message: I need VLH jugs,front or rear.Any condition. # 120-362 or # 120-363.Will consider UL jugs? 1qazaq@adelphia.net Blackie Sharp.

23. jcp02@cox.net message: WANTED: Needed, one set of piston rings for early Harley J piston part # 252-15. Bore size is not critical and condition is not critical, but a decent set would be prefered. To be used for museum display. Let me know what you have along with price and shipping. Thanks, any help appreciated. Jim Hansen 619-449-8560

22. pan49@arcor.de message: looking for kink size saddlebags, correct for 48-49,orange piping/ "western buckles"
thanks in advance

21. heliplex@cyberpc.com message: Looking For the correct engine for my 1915 reading Standard..currantly has a HD engine in it , and I NEED to know is this the Correct motor or Not ???

thanks in advance for ANY help on this project..I WILL make her purr Again with alittle help !!!!

Mark
Oregon USA
3/10/07

20. oldbikebuilder@verizon.net message: I am looking for a good, unrestored, complete,(or close) Harley J or JD engine 1917-1923 only. Prefer a mag model with matching components. Send Pics and pricing please.
Thanks all, John

19. pascoe40@hotmail.com message: wanted a complete ace engine to buy or parts cases

18. danmargolien@yahoo.com message: For Schebler HX181: needle, knurled knob, inlet valve/seat, float. Thank you.

17. dieter.hofem@t-online.de message: I look for a small Mesinger Saddle with springs for my old JD Racer.
Thanks George- sincley Dieter

16. pnordling@epicor.com message: Looking for a '54-'56 KHK. Even a project will do, but only if the correct parts are included.

15. elmore.3@virgin.net message: WANTED REAR BUMPER BAR AND BRACKETS FOR 1936 SERVICAR
EMAIL - elemore.3@virgin.net

14. elemore.3@virgin.net message: WANTED - CORRECT HEADLAMP FOR MY 1928 HENDERSON DELUXE,
ALSO CONTACTS FOR ANY REPRO PARTS,
EMAIL - elemore.3@virgin.net
THANKS - JOHN

13. marshmetz@aol.com message: Early teens motorcycle two cylinder motor. Cylinders are at 90 degrees or right angle to each other. No markings on cases other than a serial number. If you have one send photo with email. Ken

12. mscottharley???@sasktel.net message: WANTED-1940 ONLY HARLEY 45" GAS/OIL TANKS.WILL TRADE NOS 41-46 GAS TANK FOR GOOD SET OR CASH.REMOVE ??? FROM EMAIL.

11. obsurfer67@yahoo.com message: Looking for 1947 Massachusetts motorcycle plate. please email if available or thoughts on who to contact
obsurfer67@yahoo.com

10. Mx_reeb@yahoo.com message: Looking for 48 pan engine. Interested in other 48ish parts as well. Feel free to email and tell me what ya have.

9. vtwin@ix.netcom.!com message: WANTED: OEM 47-50 FL gas tanks. Remove the "!" from the email address.
Thank you George.

8. devid.moto@virgilio.it message: I wanted a 1926 Harley frame for a big twin, for sale or excange.
Thanks George

7. ironcountychoppers@yahoo.com message: WANTED; CONNECTING RODS AND PISTONS FOR 1923 JD HARLEY, thanks,george

6. oldcycle@allstream.net message: WANTED 1914 twin Harley 2 speed rear wheel parts,have about 75% of the rear hub (Any small parts),any help would be greatly appreciated to getting this original paint machine rolling again.Also need a 14 HD front fender,rear stand and spring clip.Looking also for 1907 Reading Standard ecentrics and battery tube,email at oldcycle@allstream.net,thanks Rick


GREAT JOB GEORGE "THANKS AGAIN!!!"

5. gipehomeimprovements@msn.com message: need parts for 1965 XLH sporster. sprocket cover (has a rib on it. part #-3487257). left & right rear panels for headlight nacelle. (part #'s -4629159a / 4629259a) parts must be in good condition. thanks

4. gorillatat@msn.com message: I want to trade that 46 knuckle fender for 51/53 left side tank and f/fender. Boyd Benson in Buffalo please call me. Your phone number doesn't work! Scott,206-790-5982 I also have a 1940 and earlier knuck clutch assy. (must of it) I think it's a 1938.It's got a lot of surface rust but it looks usable. I also have that 1938 only odd size kicker gear nos. I'll trade for a stock mouse trap assy. or good 51/53 type headlight, OEM only please. I also need a 1953 Speedo.

3. bluedog5@cox.net message: WANTED : 1917 and up INDIAN powerplus rear rim complete and assorted motor parts have extra frames or indian cases cylinders flywheels for trade or cash. ALSO need a series 20 EXCELSIOR motor ,thanks

2. pan49@arcor.de message: wanted:original paint 58 duo glide. thanks

1. dmk441@yahoo.com message: Wanted: Pre 1930 Lightweight american motorcycle or motorbike project, in any condition, email me at dmk441@yahoo.com. thanks George.
Dave
AMCA#1388

February 2007

35. ebourrague@wanadoo.fr message: WANTED, FLXI SIDECAR or FRAME ONLY or any information and pictures

34. torsten.pesler@arcor.de message: WL45 with papers for restoration,
some missing parts is not a problem.

33. ja-nyb@online.no message: Interested in parts for my 1916 Thor. Gearbox and rear cylinder are wanted. Have some engine parts for 1913 Thor if you have the right parts for me.

32. kevparker@aol.com message: Wanted Indian Chief 1934? to 1939 rear wheel backing plate with shoes brake cam and curved brake arm. What have ya got? Thanks, George for the site!!

31. lostmorality@hotmail.com message: Need a 45 (flatty ) oil tank,,no crazy $400 tanks please. Thanks George

30. duffymt60@aol.com message: Looking for a pair of original wheels for 67 xlch pref. aluminum, also solo seat hardware thanks

29. happypig5@hotmail.com message: Looking to buy one 1947 - 1948 HD Locktite Saddle bag.
These are the smooth-grained black leather bags with two cover straps and two tie-back straps. In place of the cover's middle strap is a chrome-plated twist lock with a place for a padlock. The cover is embossed with the winged HD bar-and-sheild and edged in a row of nickel spots over a row of hand-stamped rectangles. The body has a row of nickel spots. I only need one bag. Thanks... and Thank you George!

28. sc1chuck@aol.com message: Looking for a rear head for 1936 VLD 9 bolt aluminum with primer port.I don't know who made them, as they are different from the 1940 9 bolt aluminum heads. I have the front head, have found other sets, but no one will break up a set and I can't blame them. Chuck @713-478-4568

27. ecs1015@ispwest.com message:
Moto Scoot/Salisbury Aero
Looking for tadem version and various other one. All scooter should have original motors and as complete as possible. Also looking for a 1937 Salisbury Aero with 3/4 horsepower engine. Please send pictures and prices. Also any pictures, literature,clubs, or swap meets

26. motorheadmike@comcast.net message: I would like to buy a complete or there about late Reading Standard. 1915-24.Like a 1924. Any fairly complete projects.I would consider any parts or chassis items .Please call or e -mail Mike 732-255-5854.n.j. .

25. vtwin@ix.netcom!.com message: WANTED: Set of 57-58 BT tank shift tanks. Remove the ! from the email address.

24. polo69@verizon.net message: wanted front cylinder head for 1940 sport scout,with angled spark plug hole will trade straight one and cash thanks greg 215 766 0242

23. shuvl427@comcast.net message: Desperat to finish my engine, I have a 1936 EL that needs the baby food jars, I have the front intake lower part only, I need all four [4]tops, also the lowers for both F&R exaust and the rear intake hope someone can help please look through your parts I will take any or all of the parts thanks

22. DPATHC2@KC.RR.COM message: WANTED PANHEAD WISHBONE FRAME 913 268 5314 CELL 913 515 3721

21. bhamster@comcast.net message: WANTED....Anything whole or part(s) ...1936 INDIAN CHIEF... 360-815-4426 or 360-752-2730. Thanks (again)

20. bhamster@comcast.net message: WANTED....Anything whole or part(s) 1936 Indian Chief thanks

19. bbop@dblclickit.com message: want 1935 r or rl good engine cases good numbers matching numbers will buy out right or trade 1936 rld of the same. thanks

18. indian@indy.rr.com message: Any American Motorcycles or American Parts for any kind of Motorcycle before 1953. No load to big or small. Will buy your whole collection of bikes or parts. Have cash and will travel. Joey at 317 201-7777 indian@indy.rr.com

17. ridinh@nwi.net message: Sorry, FL, Need the drum for a FL 58-62. Thanks Brad

16. ridinh@nwi.net message: I need a NOS or gently used rear brake drum and sprocket 58-62 black or chrome. Thanks Brad

15. Joe58Duoglide@aol.com message: ***** CASH MONEY, TOP DOLLAR PAID ****
Desperatley need REAR cylinder head for 1958FLH panhead, FORGET EBAY will pay good money for decent rebuildable rear head, 58 thru 62 email Joe58Duoglide@aol.com

14. 100scoot @ charter.net message: looking to trade a 46 only wl rear fork leg for a 47-52 wl rear fork leg
must be excellent condition as mine is

13. 48hdbob@onramp.bz message: Need 2 focus/adjustor screws part #11384-38 and 2 11375-38 door screws for Harley-Davidson SH-2 spotlights, prefer NOS parts.

12. 48hdbob@onramp.bz message: Need contact information, address/phone number of man who has the rivets to restore the early Harley-Davidson SH-2 spotlights.

11. talktojon@aol.com message: $$WANTED$$ HEADLIGHT Original MOTOLAMP /JOHN BROWN Headlight for early thirties 1931-1932 Any leads will be appreciated and rewarded! Thanks George!!

10. talktojon@aol.com message: $$WANTED$$ Original PowerPlus outer primary cover. Any leads will be appreciated and rewarded! Thanks George!!

9. brianapryl@verizon.net message: Looking to start an EL project. Need at least a set of cases , more if you have it. Not looking for anything recently rebuilt.Any help would be greatly appreciated. Thanks.

8. chopper4lfe@aol.com message: hello. wanted a 65 and up 4-speed ratchet top tranny case. good condition no cracks or breaks. its for my 67 flh project. looking for original but will look at anything. e-mail me with pics, prices and details. thanks a bunch. great site.

7. keyla185@sbcglobal.net message: Wanted to purchase an older Harley Davidson Full Dresser,must be stock and original.Looking to pay a reasonable cash price.I do not want a put together or custom motorcycle.Prefer in Connecticut but will travel in the New England area.Email keyla185@sbcglobal.net Phone 203-215-3826.

6. indian52@maine.rr.com message: Hi
I'm looking for an axle and brake assy. for a Goulding sidecar. The body mounting holes don't line up with the Rocket body so maybe it is for a package truck? Don't know what is fits, but I need to buy or borrow to copy the axle and brake assy. 1-207-650-1795 Thanks
Paul

5. (((33VLE@OPTONLINE.NET))) message: AM SEARCHING FOR A DECENT 1915-1923 HARLEY LOOP FRAME FOR A TWIN 3 SPEED PROJECT. WILL CONSIDER ALL.
THANKS !
PLEASE REMOVE THE ((( ))) FROM EMAIL ADDRESS
CONTACT ME IF YOU MIGHT BE GOING TO OLEY WITH A FRAME OR ROLLER

4. fakeit@bellsouth.net message: WANTED 1942 XA exhaust pipes , foot pegs , and battery.

3. Indian#ken@nmax.net message: Ace Crankcases Wanted.
A set of good or repairable Ace upper and lower cases.
Will pay Cash or Trade with my antique M/C parts, H/D, Indian, etc.
To email remove # from address.
Thanks, Ken

2. hd36ohv@yahoo.com message: NOS WR/KR intake manifold on eBay 220078749421

1. r.risinger@sbcglobal.net message: Need fuel tanks for 1946 U, UL Big Twin Flathead. Tanks from 1941-1946 are the same. 281-352-3655 Thanks George for letting me post.

January 2007

54. kippeg@optonline.net message: Hi, I'm searching for general info and pictures of circa 1909 Racycle motorcycles made by the Miami motor manufacturing in Middletown Ohio. Thanks.....Kip

53. bobbyandaudria@sbcglobal.net message: want to buy an I beam springer front end chrome not an issue stock length

52. pigstye13@aol.com message: WANTED> I need a GOOD left side flywheel half for a 38 EL. Anyone got one for sale? Thanks.............Mutt (903)873-6644

51. henderson1926@aol.com message: Wanted Big Twin Harley springer front end complete. Extended is ok
207-318-5406

50. henderson1926@aol.com message: Wanted Indian 4 cylinder and Henderson motorcycles complete machines or basket cases. Any model any year any condition CASH WAITING 207-318-5406

49. nalovely_6@hotmail.com message: WANTED : HARLEY MOTOR, ANY CONDITION,SHOVELHEAD,,

48. clapton824@aol.com message: Wanted 1916-1928 HD with sidecar. Bike must be mechanically sound and cosmetically clean. I'm near Baltimore, Md. thanks Rich

47. patjim@sacoriver.net message: Indian Warrior pistons wanted for 1950-53 Vertical. Looking for several sets of nos +.020 or greater. Thanks. Jim patjim@sacoriver.net

46. pigstye13@aol.com message: WANTED. I need the top tree (handlebar clamp) for a VL, doesn't matter what year or condition.Tons of parts to trade or cash.
Mutt

45. jogo03@comcast.net message: hi. i am looking for some side car brake parts i need the left-right side shaft arms. the cross offer shaft and the backing plate . for a 1939-57. i have some later side car parts i will horse trade. and i have some early vl mounting brackets . thanks and happy trails

44. rpassehl@comcast.net message: LOOKING FOR A 1955 FL OR PERFERABLY FLH COMPLETE MOTOR AND OR TRANS. CHEERS TO GEORGE! rpassehl@comcast.net

43. hotrodndn@peoplepc.come message: wanted 41-45 HD 29 degree b/t frame with uncut neck.Have 48 wishbone with oem stock neck[working lock]to trade.also need 41-46 tanks. have 48 set in rough shape to trade. or buy outright. thanks George.leave e off end of email when responding

42. hotrodndn@peoplepc.come message: wanted 41-45 HD 29 degree b/t frame with uncut neck.Have 48 wishbone with oem stock neck[working lock]to trade.also need 41-46 tanks. have 48 set in rough shape to trade. or buy outright. thanks George.leave e off end of email when responding

41. pbennett@westernshelter.com message: Wanted. 1930 Model D front fender complete.

40. 1qazaq@adelphia.net message: Wanted : VLH 9 bolt heads & Jugs,any condition? What have you? front or rear.

39. chief348(((@)))juno.com message: Wanted; Looking for owner of 38EL2497. If you can prove to me you own this Motorcycle I might have some interesting Literature for you dating back to 1943. The Bike had ties to Newport News, VA. and Syracuse, NY. and places in between those points back then. Just a longshot?? Drop the ((( ))) if you email me. Thanks George!

38. ebuyou"@"dm-tech.net message:

Looking for a Harley-Davidson Scat rear chain guard. Part number 60301-63. Used is okay as long as it has all of the bolt holes and tabs, etc. Thanks. Take out the "" around the @ for reply.

37. tavis3-@-excite.com message: I am in need of handlebars for a 1937 Indian Scout. Not the 1938-42 Scout and 741 style. Prefer straight and unchromed, but will consider in any condition. I don't care if they are original or reproduction. Please reply with price and a photo if possible? I have Cash or Scout Parts to trade. Remove the - around the @ to reply by email. Or call me at 701-483-0854.

36. indianchief1947@hotmail.com message: WANTED NAMES OF SUPPLIERS OF 1920'S INDIAN CHIEF ENGINE PARTS.
PLEASE EMAIL ME IF YOU CAN SUPPLY PARTS OR KNOW WHO CAN

35. mediabear@comcast.net message: Looking for an electric start setup for a 45" H-D servicar.

34. lonerglide@sbcglobal.net message: Im in need of a inner primary for a 1969 flh,,if anybody has one please send me mail,,this is not for a restore but for a everyday rider,,Thanks,,Glide

33. ridinh@nwi.net message: I need a set of NOS rear brake pads part # 41801-58A for a 62 panhead. I would consider pads and rivits also. Thanks Brad

32. grinch@airmail.net message: Wanted: Harley VL shift gate with reverse for my 1933 VLE project. Also looking for 1932 Harley LE sidecar interior. Thanks. 817 683-8191

31. harlo003@hotmail.com message: lookig for ul or ulh engine. 813.228.9087

30. bbop@dblclickit.com message: 1930 dl orig. paint frontend intrresting trades only

29. 100scoot +@+charter.net message:
i need a few shrader type inner tubes 18" size
forgot to say i dont care if i gotta patch some holes in them
i'll pay a good $ for them
remove the +++ to email me

28. 100scoot +@+charter.net message:
i need a few shrader type inner tubes 18" size

i'll pay a good $ for them
remove the +++ to email me

27. lsrezin@hotmail.com message: Wanted : Used set of handlebars for a 1948 Indian chief. Like to have 'em straight but the chrome doesn't matter. Also hoping to find a set of heads and a kicker arm.

26. amphib032003@yahoo.com message: wanted spokes sets for a 1923 jd

25. duda@rduda.com message: SERVI CAR wanted. Looking for a running servi from 34-58. Give me a call if you have one to sell. Thansk George

24. v.thor@pc.dk message: Hi, still looking for a 36-39 bigtwin kickarm. Think someone out there must have an extra that might be for sale.
Thanks in advance.
Villy

23. garcia_r@msn.com message: $$WANTED$$ : OEM Harley Big Twin Narrow Brace Front Fender. Must be solid, complete & in good condition. Must have factory holes for side trim. Call Ray 330-799-3738. AMCA # 4885

22. bbop@dblclickit.com message: trade only 1929 dl tool box need 1935 horn brackets 1935 air intake# 1406 35a for 35 r model thank you

21. HD48FL@AOL.COM message: Wanted: '48 wishbone frame

20. ghwoodworks@cablerocket.com message: wanted for 27 jd 61 ci...solo seat, single headlight,tail light and bracket..rear cylinder, front axle nuts and misc hardware...thanks george

19. jsrestore@aol.com message: anyone have any info on a circa 1900 COLORADO motorcycle? manufactured in denver, thanks

18. harleyman53@spray.se message: Hello!
I am looking for the complete internals for my off-line springer, bigtwin handlebars. Spirals, wires, handles. Even lightswitsh. Everything i need to make it colplete. Now...i am from Sweden so i might not be spelling the words wright but i tryed! hope that counts!
Thanks George.
Ps.I live in Västerås, 100 km from Stockholm.

17. geoffcooke@eftel.com message: Wanted-1x5 stud rear wheel for hydraulic rear end Servi-Car.Used from 51 up.Pic would be appreciated with email contact.Thanks & Great Site George.

16. marylong8@sbcglobal.net message: Need knucklehead lefthand case blueprint. must layout all the demetions.

15. mscottharley???@sasktel.net message: Wanted....38-39 Harley 45" transmission and clutch.Also primary cover.Remove ??? from email.Thanks George.

14. jbabchak@tribune.com message: Sportster trike frame wanted. Any year or condition. Thank you- call Jim 917-355-6903 or email jbabchak@tribune.com

13. 100scoot +@+charter.net message: i'm in dire need of FACTORY pictures of 47 wr and 49 wr
they must be the factory pix only
i'll pay a good $ for them
remove the +++ to email me

12. marshmetz@aol.com message: Early teens motorcycle two cylinder motor. Cylinders are at 90 degrees or right angle to each other. No markings on cases other than a serial number. If you have one send photo with email. Ken

11. my46wl@yahoo.com message: In need of a few things to finish some projects, Front and rear fenders for 46wl,speedometer for a 60 panhead, all must be in good original condition, Thanks Greg

10. blacktop12@comcast.net message: wanted anything whole or part 1936 Indian chief. 360-815-4426 or 360-752-2730 thanks

9. bhamster@comcast.net message: Wanted any thing 1936 Indian chief, like frame, fork, motor ect. Thanks 360-815-4426

8. bhamster@comcast.net message: Wanted any thing 1936 Indian chief, like frame, fork, motor ect. Thanks

7. iamjm@yahoo.com message: Duo-glide 2 piece handlebars wanted. Decent only. Internals a plus. Thanks Jonathan

6. atlvandal@yahoo.com message: Looking for a 1957 Georgia M/C tag. needs to be in good condition.

5. mscottharley???@sasktel.net message: WANTED..1942 0R 1943 HARLEY WLD DAMAGED LEFT SIDE MOTOR CASE OR CASES OR GOOD 1937 TO 1942 MOTOR WLD CASES....ANYTHING WLD CONSIDERED.ALSO DAMAGED WLDR OR WLDD MOTOR CASE OR CASES.
REMOVE ??? FROM EMAIL.THANKS GEORGE!!!!

4. dixchief@gmail.com message: need a pair of OHV heads near 750cc in size. Thes will be modified to fit the jugs so several makes will work: Indian,JAP,Matchless,HD peashooters. Thanks George

3. s.w.gilbert@DL45Homepage.com message: Hey People, Trying to locate an early servi-car rear end for a friend. This is the first castings with the brake in the center housing. This is the model BEFORE the truss rods were used. Any leads would be appreciated. Thanks!! Stephen Gilbert DL45Homepage.com

2. r_5932@hotmail.com message: Wanted leaf springs and u bolts to fit 38 harley sidecar. also looking for the oil pump for 38 EL knucklehead that has raised casting boss for oil pressure switch positioned between the top two stud holes instead of inline with the right hole. Thanks Rob

1. fatdog1903@yahoo.com message: have rare 1914 Harley 2 speed rear hub shell great threads and original nickel. need to trade for 14' single speed hub or 15' single tanks and cash or freewheel hub. Need lots!

December 2006

107. llwauto@aol.com message: wanted 1920s 45 7 bolt 101 scout front cylnder

106. jd1917jennings@yahoo.com message: WANTED ONE POINT COVER FOR A BERLING B-21 MAGNETO.DOES ANYONE HAVE ONE FOR SALE OR TRADE?THANKS JOE J.

105. chrisginni@ohio.net message: Wanted; 1912 Harley cylinder in nice shape also a carb for the same motor.Thanks Chris

104. amca2475JT@earthlink.net message: Wanted a 1952 Bob Rackstraw,this bike maynot be operating on all cylinders, last seen at side of road with blown head gasket. I have parts to fix but need location to deliver parts! Where are you??? give me a call. Take out JT before the @ ...OK B@B make the call or anyone that knows where he is?? JT

103. henderson@c.dk message: Henderson 1918 1919 all parts.
Have manny American parts for trade.

102. pwidger@shawneelink.net message: Try it again: Need a '73 Front Brake Caliper for Harley Davidson. Phone 1-877-209-2099. Tim

101. pwidger@shawneelink.net message: Need a '73 Front Brake Caliper for Harely Davidson. Phone 1-877-209-2099. Tim

100. pigstye13@aol.com message: pigstye13@aol.com message: WANTED: any 3 bolt 1 1/4" carb body in decent shape. Don't care if it's a M11 M21 M31 M41 M41L M51 M51L etc, don't care if it has a single part attatched to it, just need the bare body. I have a ton of old Harley parts to trade. Anybody got something I can use? Thanks
Mutt.........(903) 873-6644

99. pigstye13@aol.com message: WANTED: any 3 bolt 1 1/4" carb body in decent shape. Don't care if it's a M11 M21 M31 M41 M41L M51 M51L etc, don't care if it has a single part attatched to it, just need the bare body. I have a ton of old Harley parts to trade. Anybody got something I can use? Thanks
Mutt.........(903) 873-6644

98. jcape2626@aol.com message: For 1969 Harley-Davidson XLH Sportster - I need a five-gallon fuel tank and both fenders. New or used. One or all parts.

97. rudy4536@aol.com message: need 1935RL rear fender parts part no.3745-29 this is the -2- pc right fender brace clip with the rear chain guard clip that was bolted to the brace, also need the chain guard,and outer primary cover, got some cool things to trade or cash thanks.....rudy

96. bbop@dblclickit.com message: wanted 1931=34 hd rl tool box/will buy or trade for same but vl thanks

95. hogluvr1340@yahoo.com message: Oops...

94. hogluvr1340@yahoo.com message: Looking for a complete clutch assembly for a 2-bolt transmission. Also looking for 2-bolt transmission parts for a 1940 transmission. Let me know what you have. Thanks...

93. hogluvr1340@yahoo.com message: Looking for a complete transmission assembly for a 2-bolt transmission. Also looking for 2-bolt transmission parts for a 1940 transmission. Let me know what you have. Thanks...

92. softtail5@hotmail.com message: looking for a carb and magneto for a 26 indian prince. gas tank for a 14 excelsior. thanks curtis

91. rudy4536@aol.com message: need rear stand for a 35RL, Thanks

90. Powerlifter626@yahoo.com message: WANTED: Looking for a Mounting Bracket to mount a 55-58 K and XL Speedometer OEM# 67200-54 If anyone has one or knows where I might be able to find one please let me know. Thanks

89. garcia_r@msn.com message: $$WANTED$$: OEM Harley Big Twin Narrow Brace Front Fender. Must be complete & in good solid condition with factory holes for side trim. Ray 330-799-3738

88. cdh_2136chief+@+hotmail.com message: Any body out there got any INFO on HD riding(rentals,events,etc) on any of the Islands in Hawaii??? Also any Old bikes or parts on Oahu? Maui? Kuwaui, Kona -Hilo on the Big Island? any old or new M/C riders/enthusists out that way? If so i'd like to hear from ya. take out the + around the @ for response. Thanks George!

87. 651.svensson@telia.com message: WANTED:Detectalite headlights lamp visor.Top dollar paid.Thanks Stefan

86. $indianken@nmax.net message: Wanted ACE crankcases, or engine. To finish my restoration project. will take a non matching upper or lower case too. Also looking for 1914 or 1915 Indian twin cases in useable condition.
Thanks. Please remove $ in email address to reply.

85. howardb"@"visi.net message: WANTED: 1951 G Servi-car engine cases with good numbers and matching belly numbers. remove " quotes from email address

84. modularinc@aol.com message: Lookig for Schebler carburetor HX181 in good condition.
Cash or trade have early 20's carb for 61" HD. MR4 Linkert

83. tom.englund@kolumbus.fi message: INDIAN Sport Scout 1941-42 Kicker Bracket!!Thanks Tom

82. dalderson@pta.wa.gov.au message: Desperately seeking cylinder head for AJS K10. 1928-31. 500cc OHC.
Mine cracked beyond repair.Thanks,Dave.

81. dmetzcus@comcast.net message: Looking for a 45 big twin springer offset top clamp with dog ears. Finish does not matter. Email: dmetzcus@comcast.net

80. patjim@sacoriver.net message: Indian Patrol 1952 parts/information wanted. I would be interested to talk with anyone who has one of these 3 wheel Verticals for information exchange and to create a registry. Always interested in parts for these bikes also. Thanks. Jim Garrett 207-929-8035 patjim@sacoriver.net

79. johnnyc@icehouse.net message: 1947 rear fender to a "45" solo WL model. OEM! pretty darn straight
rear fender with the wide braces [as compared to the narrow '46].
what I see: some surface rust underneath popping thru the funky
gray primer. some bondo. few dings [NOT major dents]. an extra
50 cent piece size hole was put into tail that will hide directly
behind the correct tombstone light body. has saddlebag bracket holes.
minor rust pitting. a very restorable original fender. $200. firm.

78. pan67@aol.com message: I am looking for a back rest that is formed to the seat rail on a 77 to 84 FLH seat rail. the rear of this back rest is formed to fit this rail. Thanks

77. mscottharley!!!@sasktel.net message: Wanted- Harley wr,wldr,wldd,rldr motor or cases.Also WR tanks.Cash or trade.
Remove !!! from email.Thanks.

76. timfengmc@yahoo.com message: Hi I'm looking for a (1961) New York state motorcycle plate.Thank you .Tim

75. hogluvr1340@yahoo.com message: 1/2/07: Have a very nice set of 1947 WL cases, would like to trade for a set of 1940 WL cases in similar shape.

74. hogluvr1340@yahoo.com message: 1/2/07: Looking for a 45" Solo springer front end, all or part.

73. joe157@comcast.net message: Wanted to buy, 1969 or older XLCH sportster. Basket cases, unfinished projects, ragged out, or original cond.

72. pterison@maine.rr.com message: I am looking for a 42-46 big twin frame must be in original uncut condition will pay top dollar for nice frame ,also 41-46 tanks , narrow brace fenders etc. have cash and parts to trade. thanks george

71. Bamercan(@)kans.com message: I need a seat for a 1926-32 Harley Davidson Model B single, part number 31-7826. Remove ( ) from around @ and reply to: Bamercan(@)kans.com THANK YOU

70. thunterww@yahoo.com message: Wanted 1976 Sportster parts Rear brake pedal -foot rest assembly with cable and adjuster nut if poss.

69. oldtimes30@yahoo.com message: FRONT 4 FIN KNUCKLEHEAD CYLINDER.PLEASE EMAIL IF SOMEONE HAS ONE THANKS

68. johncamp@indy.rr.com message: looking for harley 1923 jd parts handle bar,lights,any thing

67. yorgtat@hotmail.com message: Hello there,anyone have a 41ULH left side case with original vin#....must be in good condition...thank you.....

66. elemore.3@virgin.net message: collector seeking vintage American motorcycles pre 1950 v twins and fours, harley,indian,ace,henderson, basket cases especially!
also looking for good frames and motors/cases
email with details of what you have,
thanks - John

65. v.thor@pc.dk message: Hi, looking for a 36-39 bigtwin kickarm, hope somoone can help me out..Thanks in advance..

64. Steirerlisa@aol.com message: looking for a decent set of 1948 ul engine cases and timing cover and both oil pumps thanks

63. oniytruth@aol.com message: set of matching panhead cases 56-62

62. knuck39@yahoo.com message: Need 48-54 panhead right side engine case,Big Base Indian Scout front frame secion,trans,and primary drive parts..Cash or trade,all leads appreciated..knuck39@yahoo.com

61. ja-nyb@online.no message: I am interested in parts for my 1916 Thor. Cylinders and gearbox are the most wanted parts, but other parts may be interesting.

60. yorgtat@hotmail.com message: ALLOY FINNED PRIMARY cover for HD big twins,to replace tin one...made in the 60`s...imprial products...need the primary cover not the matching derby cover..rare chopper part,have cash,please mail me info..any condition considered....thank you...happy hollidays....

59. keyla185@sbcglobal.net message: Wanted to buy,an older Harley Davidson Full Dresser.I want a stock only Bike and it need not run,but I prefer a running machine.I am looking for 1 bike for myself to occasionally ride locally.I do not want a put together machine.Thank you.phone 203-215-3826.

58. mcpoorgreg@aol.com message: I'm looking for a set of saddle bags for a 50's Harley big twin. Harley had availible, colored bags. Blue,red and green. I am looking for a set of the green ones. Thank You. 315 365 2232

57. pigpen11@hotmail.com message: WANTED:49 to 59 Harley Panhead adjustable triple trees for sidecar rig. email pigpen11@hotmail.com or call 440-339-5141. Thanks George

56. tdpeirano@hotmail.com message: I'm looking for a Tilloston MD carb for a 1971 Servi-Car. The Blueknights are restoring one for The Cincinnati Police Museum. The one that was on it was stolen at a Shop where we had it stored.

55. !!hd65flh@comcast.net!! message: Looking for 3 speed/reverse shift gate for my 49 EL. To reply please remove asterisks befor and after email address.

54. garcia_r@msn.com message: $WANTED$: NARROW BRACE FRONT FENDER FOR BIG TWIN HARLEY. MUST BE COMPLETE SOLID CONDITION & HAVE HOLES FOR SIDE TRIM. CA$H WAITING. RAY (330) 799-3738

53. axel@wethink.de message: 1929 D PARTS WANTED...I'm searching for parts to complete a 1929 Model D basket case. Parts missing are (among others): jiffy stand, rear stand, dash board, tranny parts, Klaxon 11 horn ... . If you have something that fit's, pls. contact me. Thanks, Axel

52. dpatchl@kc.rr.com message: NEED GLIDE FRONT END FOR A 54 PANHEAD ANF BOTH FENDERS 913 268 5314 913 515 3721

51. bbop @dblclicket.com message: speed shift 1948 era thoro chicago ill.linkage /mousetrape spring any it. or factory instr.lit. copy fine thanks

50. raddman999@yahoo.com message: "WANTED" IM looking for a 1918 8-valve indian motorcycle and im willing to pay any price. please help if possible.
Thank you.

49. r_5932@hotmail.com message: Looking for a 38 Knucklehead EL oil pump body. Has a raised casting positioned between the two upper stud holes on the pump instead of in line with the right stud hole.Raised casting part is where the oil pressure switch goes. 604 535 7696. Any info or leads greatly appreciated. Thanks Rob

48. soffttail5@hotmail.com message: wanted, Schebler gx2, gx5 or gx11. magneto DU-5 (CCW) splitdorf magneto, this is for my 1926 indian prince. curtis

47. michael@drew-rogers.com message: I am looking for mounting brackets for servi car leg sheilds for my 1963 model. Please email info to Michael@drew-rogers.com

46. billbaughm4@aol.com message: 1947 Knucklehead need springer, tranny, tanks.

45. ironcountychoppers@yahoo.com message: WANTED;BLOWN OR JUNK , BIGTWIN MOTOR,ANY YEAR,SHOULD LOOK-BE COMPLETE,CRACKED CASES OK,DOES NOT NEED TO RUN,NO FLYWHEELS OK,NO TITLE OK ,I AM USING IT FOR A WALL HANGER IN A TAVERN,THANKS

44. jsrestore@aol.com message: looking for 1913 excelsior countershaft clutch or eclipse clutch,, also Spacke Deluxe motor and parts as well as an excelsior 1913 mussleman rear hub

43. montana-indian@hotmail.com message: $$$WANTED$$$ ORIGINAL PAINT OR OLD AND CRUSTY 1930-1939 CHIEF OR SCOUT..

42. randd62(@)adelphia.net message: Looking for clean used or nos rear fender 59604-58 and struts
59932-58 and 59933-58 for 62 FLH - in my family 40yrs- rear ended
by uninsured idiot. Please help,thanks -- remove ( ) for email
thanks again

41. ATLVANDAL@YAHOO.COM message: LOOKING FOR IMPERIAL FINNED PRIMARY COVER. EMAIL ME SOME PICS IF YOU HAVE ANYTHING

40. lalindb((@))online.no message: Wanted cylinder and head to HD single OHV, any condition. Please remowe (( )) from mail adress. Thanks George

39. loikav@aol.com message: Wanted: 1912-14 Excelsior V twin motor and parts including mag and carb and all control linkage systems. Also factory issue racing handlebars in any condition. Thanks George, Excelsior! Paul

38. loikav@aol.com message: Wanted: 1912-14 Excelsior V twin motor and all control linkage systems. Also factory issue racing handlebars in any condition. Thanks George, Paul

37. ebourrague@wanadoo.fr message: Hello,
I search parts for 1917-20 Harley j project. Make offer.
Thanks

36. hydraglide51@tiscali.it message: I'm searching an used drum front brake complete for harley davidson wla of 1941.
If someone have on sale please contact me
Tank you George

35. brianapryl@verizon.net message: I am looking for a set of EL motor cases. Year not important. Must be in decent shape and have matching belly #'s as well as good VIN. Would consider whole motor or bottom end, not looking for anything that has been recently rebuilt. Please include pictures with your
E-mail.Would also pay a $100 finders fee for info that directly leads to my purchase. Thanks, Brian

34. lssrezin@hotmail.com message: Looking for an OLD set of saddle bags (40's?) for an original paint bike. Any condition. (only one "s" in the email address)

33. talktojon@aol.com message: $$WANTED$$ Original PowerPlus outer primary cover. Any leads will be appreciated and rewarded! Thanks George!!

32. talktojon@aol.com message: $$WANTED$$ HEADLIGHT Original Motolamp /John Brown Headlight for early thirties 1931-1932 Any leads will be rewarded! Thanks George!!

31. dalderson@pta.wa.gov.au message: Wanted. Longuemare carb for 1907 Rex motorcycle (or any other early model). Long shot I know but getting desperate

30. globalance@hotmail.com, message: Looking for an original side car for a 1942 WLA42 Harley Davidson, WWII vintage. We live in Thailand and recently scored this rare bike from Burma. Thanks, Rollee

29. DEWGARINC@SECURESPEED.US-NOSPAM message: WANTED 1913 HARLEY FRAME FOR TWIN CONDITION UNIMPORTANT, ANY OTHER 1913 PARTS YOU MIGHT HAVE CASH WAITING- REMOVE DASH NOSPAM FROM EMAIL ADDRESS THANKS ITS GETTING SO THESE SPAMMERS ARE RUINING EVERYTHING THANKS GEORGE

28. popsflat@charter.net message: i need a set of 41-46 ul gas tanks cash waiting or plenty of hd stuff for trade

27. bbop@dblclickit.com message: wanted for harley davidson 1950's beck shift knob blue or white used white kicker pedal rubbers alumium deluxe foot boards. thanks

26. tiredironhd@windstream.net message: WANTED: OFFICIAL HARLEY DAVIDSON SERVICE MANUALS for a 1950 WL 45ci twin and for a 1958 G 45ci Servi-car trike. Thanks

25. mrgdwrench39@aol.com message: Looking for a 65 panhead motor. Doesn't have to run but must have good cases and a Good title. Thanks George!

24. workforbikes@@@@@@@earthlink.net message: Looking for cleveland four parts.. bikes anything I have a few. I also have a huge trade box..
to email as always take the "@@" out to get to me.

23. ccrider@humboldt1.com message: cylinders for 1940 ul 74 cubic inch flathead

22. wolfgang.scheerer@iname.com message: Wanted: Harley-Davidson racing sweater from the 40s, either original or reproduction. Any hint highly appreciated.
Thanks, Wolf

21. nikon59@yahoo.com message: compleat windshield assembly or just the canvas for a 1948 Harley sidecar. A pattern for the canvas would even do great so I could make one. I am restoring my dads one owner 48 Pan Head with side hack.

20. rrrrobert1960@yahoo.com message: fender front and rear for 1955 panhead stock only

19. vankirk@thevision.net message: 12/01/06 - Looking for a 1951 Indian Warrior or Warrior/TT project

18. redfernmotorparts@bigpond.com message: Can anyone assist me in obtaining a toolbox key, for a MAGNETO style toolbox. Bike is a 1923 Harley-Davidson FD model.An original key would be best, however a repop ( if they were ever made ), would work. There are tools etc in the box, and I want to get them out without damaging anything. Thanks and thankyou George. Please e me on redfernmotorparts@bigpond.com

17. garcia_r@msn.com message: $WANTED$: Narrow Strap OEM Harley Big Twin Front Fender ~ Must be solid & complete with holes for side trim. CA$H WAITING ! Ray (330)799-3738

16. bamercan(@)kans.com message: Wanted: Transmission for 1928 Harley single. Complete or parts. Also need trans end cover part number 2260-28. Remove ()from around @ and reply to: Bamercan(@)kans.com THANK YOU

15. geirsmi@online.no message: Hi
Can anybody help me with an intakemanifold to a Shaw motorbike ?
Thanks
Geir Smidt
Norway

14. s.w.gilbert@dl45homepage.com message: Hey guys!! I have a 1936-37 45 Tranny with reverse that I am trying to find the parts for . See what you have in stock. Please include pics if you have them.

Thanks!!

Stephen Gilbert
DL45Homepage.com

2270-33 inspection cover
2304-33 countershaft cluster gear bushing
2365-33 reverse idler gear
2367-33 reverse idler gear shaft
2345-32 sprocket cover for early Servi-Car

13. mx_drt_rdr@yahoo.com message: Hello All,
I am in search of a few parts for my 1960 XLR
33053-52R Starter crank and pedal
43010-52R Steel rim rear 19"
43002-52R Steel rim front 19"
92051-62 Tachomter head
92053-53R Drive cable
92064-53R Drive cable assembly
92067-53R Adapter cap
59610-60R Aluminum rear fender
Will buy or trade. Serious offers only
Thanks George

12. lsrezin@hotmail.com message: Trying to find an old front fender tip and a "Defender" style front bumper(7/16 rod that wraps around front fender) for late 40's Chief. Rusty or pitted is fine. Thanks

11. johncamp@indy.rr.com message: WANTED HARLEY 1923 JD FRAME,

10. bamercan(@)kans.com message: Wanted: Seat T-bar, part number 310526, for a 1928 Harley Davidson single. Remove the ( ) from around the @ and email: bamercan(@)kans.com Thanks!

9. marshmetz@aol.com message: Marsh Metz Twin motor or parts. This is the same twin motor used in National, Arrow and Peerless motorcycles. Ken

8. vincebourge@tiscali.fr message: Hi,I looking for a knuck or pan oil pump cover 41-50,tell me your price including shipping to france,I pay throught paypal,thanks Vince

7. info@trinitymotorworks.com message: WANTED: Indian Camelback Bike or parts. TOP DOLLAR PAID. Any leads would be appreciated. ANY CONDITION. Todd 570-460-8123, info@trinitymotorworks.com

6. knuck39@yahoo.com message: WANTED...PARTS FOR SPORT SCOUT PROJECT...NEED FRONT FRAME SECTION,FORK UPPER AND LOWER TREES WITH NECK STEM,BARS,TRANS,CLUTCH ASSY,PRIMARYS,WHEELS+BRAKES.HAVE MINT 741 FRONT MILITARY FRAME SECTION,PLUS ANOTHER COMPLETE FRAME,+741 ENGINE FOR TRADE,OR I WILL; PAY CASH.... Knuck39@yahoo.com

5. my46wl @yahoo.com message: needed to finished a all original resto, front fender for a 46 wl.good condition... call 919-761-1201

4. bbop@dblclickit.com message: wanted right side buco saddle bag.for hd big twin in the1957 buco cataloge is part number 1591with fringe

3. 651.svensson@telia.com message: Wanted.Detectalite headlight visor,the flying horse version.Thanks
Stefan

2. garcia_r@msn.com message: $$$WANTED$$$ OEM HARLEY BIG TWIN NARROW STRAP FRONT FENDER WITH HOLES FOR SIDE TRIM. MUST BE SOLID & COMPLETE. RAY (330)799-3738

1. talktojon@aol.com message: $$WANTED$$ Original Indian Motolamp /John Brown Headlight for early thirties Indian 1931-1932-1933. Thanks George!!

September 2006

170. junkerbikes@roadrunner.com message: please help me ,i need one square running board with some rubber on it,also an original used cycleray lens or headlight

169. atlvandal@yahoo.com message: looking for a good vl springer mostly complete let me know what you have

168. bbop@dblclickit.com message: wanted mech. brake rear end for 1949 harley servi car thanks

167. blackbomber65@hotmail.com message: WANTED.....offset springer front forks ...must be in good shape , no welds or bends ..just a good useable part no junk ...i will take a rear leg as well ...need to finish off a 47 ..thanks .....must be oem hd.......

166. bamercan(@)kans.com message: Wanted: Transmission and end cover for 1928 Harley Single. Remove the ( ) from around the @ and email: bamercan(@)kans.com Thanks!

165. lalindb@online.no message: Wanted engine or parts to HD 350 ohv peashooter.

164. sales@motorcyclerescue.nl message: looking for model B 1926 springer fork,fuel tanks.handlebars and gearbox.thanks jack.

163. lsrezin@hotmail.com message: Wanted , Heads and kicker gear for a 74" 1948 Chief . Also looking for a rolling chassis project bike. Doesn't need to include engine or tranny.

162. iriengr@hpnts.net message: Wanted, right side flywheel for 1939 Knucklehead, Casting # 150-35, 1 1/2" thick X 8 1/8" OD with good bores and good rod thrust washer counterbore. Thank you for any leads or help that you can provide.

161. pzphansen@aol.com message: Wanted any Springcycle parts, these motorbikes where made in Los Angles, Ca email me or call with what you have.
Thanks Peter
1-414-350-0797

160. Pzphansen@aol.com message: Wanted any Moto-scoot parts or complete scooters or Safticycle parts or complete safticycles or any old motorscooters email me or call me with what you have.
Thanks Peter
1-414-350-0797

159. indianchoutracer@yahoo.se message: Knucklehead tool box, even a box without lid is interesting. Have some nice knucklehead trades.

158. indianchoutracer@yahoo.com message: Knucklehead tool box, even a box without lid is interesting. Have some nice knucklehead trades.

157. alexis.guiomard@laposte.net message: Hi, I'm french and I'm looking for Harley Davidson title (only title) for panhead, shovelhead, or evolution big twin.
I pay with paypal.
Thanks
Alexis

156. xxxloikavxxx@aol.com message: Wanted: Complete oil pump assy for 1915 Excelsior twin. 1915-1924 may fit. Any help here? Thanks and remove "xxx's" before emailing. Paul Los Angeles, California

155. info***@***beautyofspeed.com message: WANTED complete K model / early Sporster rear wheel, with brake, drop center steel rim etc... Remove *** in email to contact me. Thanks

154. **jurassicracing@rushmore.com message: looking for a 1956 harley K-model,complete bike,restored or original,must at least look original and correct,no baskets.remove the ** from the email.thanks

153. DPATCH1@KC.RR.COM message: PAERTS NEED FOR A 1954 PANHEAD 50 ANNIVERSERY FENDER EMBLEM TANKS ,FRONT END ,FENDERS CALL DAN PATCH 913 515 3721 913 268 5314

152. anteks@msn.com message: Looking for a good 65a generator with or without regulator. Thanks George!

151. *garcia_r@msn.com* message: WANTED: OEM HARLEY BIG TWIN NARROW STRAP FRONT FENDER, MUST BE COMPLETE & SOLID $$ WAITING. PH. 330-799-3738 Ray Thanks George !

150. ebourrague@wanadoo.fr message: Hello,
I search parts for 1917-20 Harley j project. Make offer.
Thanks

149. randyslattery@yahoo.com message: 1958 Harley Hummer Model B. No Battery.

Need One Part # 71502-55 Light Switch, complete with screws.

Thx.

148. ebrown@pgonline.com message: Wanted - Rear knucklehead, small port, any year. Also need rear 4 fin cylinder for knuckle.

147. devid.moto@virgilio.it message: I look for a gear 3 speed for a 1915 HD, for sale or for exchange with other gear speed or HD spare parts.
Thanks: Devid

146. corner1"@"ebox.tninet.se message: Wanted for a 1938 E/EL: left side gas tank, oil tank.
corner1"@"ebox.tninet.se remove " in the email adress.
Thanks George for a greate site...
Thomas


145. "garcia_r@msn.com" message: JUST LISTED ON E-Bay A VERY RARE HARLEY DETECTALITE HEADLIGHT VISOR.... YOU WON"T FIND ANOTHER ! JUST TYPE IN KNUCKLEHEAD VISOR. THANKS, GEORGE !

144. jsrestore@aol.com message: looking for 1913 excelsior countershaft clutch or eclipse clutch,, also Spacke Deluxe motor and parts as well as an excelsior 1913 mussleman rear hub

143. camman@operamail.com message: Need 1958 to 1969 Fl or flh right side engine case. Also need left gas tank 1974 flh in original black paint. Price and pictures to camman@operamail.com thanks

142. tonydemarco@dochs.org message: I need a set of split tanks for 45 solo, left hand shift. 1950 and up.
e-mail Tony @ tonydemarco@dochs.org.

141. yorgtat@hotmail.com message: Hello there...looking for an early alluminum RIBBED carb cover,50`s-60`s accessory,to fit linkert left side for flathead,made by R.S&Sons but maybe others also...usually seen on old Bobber,racer photos.....anyone have one kicking around,Please mail me......thank in advance.......

140. 9dkafton@clearwire.net9 message: WANTED: Front fender for a 1912 Excelsior. Also, I need a pinion shaft for a 1918 Reading Standard. Thanks, Dave ( remove the 9's to reply)

139. delautjes@planet.nl message: Wanted: Set Indian teardrop tank decals (1940- 1941) including striping (left & right)
Thanks

138. loikav@aol.com message: Wanted: 1915 Splitdorf mag/generator for 1915 Excelsior twin with lights. Also looking for 1912-14 Excelsior front wheel. OK if hub is gutted but must be otherwise usable. Thanks George, Paul V California

137. crossbone2110"@"aol.com message: HARLEY 1942 - 1946 BLACK plastic hand grips and the PAINTED HD Emblems. Remove " " from email address. Thanks, Lenny 202-648-8026

136. ramasauskas@sbcglobal.net message: wanted Excelsior Henderson 4 and FN 4 cylinders motorcycles.Send me pictures and price please! Thanks

135. redfernmotorparts@bigpond.com message: 1966 XLCH Sportster solo seat, and mounting assembly needed for an original old bike that has had an aftermarket seat fitted. It has to go, and be replaced with the correct solo one. Is there anyone out there can help me? Please e me at redfernmotorparts@bigpond.com
Appreciate the opportunity George.

134. DPATCH1@KC.RR.COM message: WANTED PANHEAD CASES 57 OR EARLIER #'S MUST BE GOOD CASH WAITING DO NOT NEED PAPERES 913 515 3721 913 268 5314

133. girardfox@aol.com message: Hello All....
Looking for Henderson DeLuxe handlebars. I also need Sunbeam clutch parts to fit my
1934 Model 80: cork plates and springs.

Thank you!

132. HD4774@aol.com message: I need a engine oil line 1947 Knucklhead Timing cover to Heads Original's only no REPO's

131. HD4774@aol.com message: I need a engine oil line 1947 Knucklhead Timing cover to Heads

130. sethro57@yahoo.com message: Looking for a roth/custom cycle eng. breather for linkert carbs. anbody out there got one for sale. email please I can send money asap thanx

129. fatdog1903@yahoo.com message: Looking for Early Harley Single parts. Need Rear 14 single speed chaindrive freewheel and hub, 1915 Single tanks and all fittings freewheel quadrant and lever rear brake 14-15 single speed. 14 eccentric and pedals just about everything except motor frame and fork. Thanks FatDog

128. rsharp@rcn.com message: I am looking for a good OEM rear fender for 56 or 57. This is the last of the ridged frame rears with the cutout for the newer tail light (not tombstone).

127. mortensprivate(@)hotmail.com message: Does anyone know, where in the US I can buy new ( or usable ) cams for Harley 21" OHV Peashooter?
Thanks
Morten, Denmark

126. bbop @dblclicket.com message: need a blue beck shift knob also plastic blue beck hand grips

125. garcia_r@msn.com message: WANTED: OEM HARLEY NARROW STRAP FRONT FENDER FOR BIG TWIN, MUST BE COMPLETE AND GOOD SOLID CONDITION. (330) 799-3738 $$$

124. barnyard@twcny.rr.com message: Looking for 2 late solid servicar wheels. any condition.

123. azpaul50@hotmail.com message: Posted ad for Harley Topper windshield handlebar brackets last month and actually found one! Still need the other, part number 58082-60. (928) 345-0537 Thanks!

122. softtail5@hotmail.com message: Wanted: carb for a 1926 indian prince complete. a frame, front end sheet metal for a 1914 excelsior thanks curtis

121. oldcycle@allstream.net message: WANTED 1914 Harley two speed rear wheel or any spare parts to this machine,also looking for complete engine or bottom end for this 1914 twin.Have original paint machine with some engine parts,I need these parts to help complete.Long time AMCA member #3749 ,any help would be appreciated,thanks Rick

George thanks again fantastic classifies

120. redfernmotorparts@bigpond.com message: Howdy, I need a genuine/real, V model HD sidestand. Can anyone help?
$$$$$$$ or can trade some V model parts if I have them.
Thanks and thanks George! e me at redfernmotorparts@bigpond.com

119. gofarfast@gmail.com message: WANTED: Hoyt ammeter for 1944 Indian Chief. Must be in very good cosmetic condition and fully functional. Contact me by email at gofarfast@gmail.com if you have one!

118. "4cylchevs@xcelco.on.ca" message: looking for a source for the "V" band brake material. still looking for 14 excelsior single belt brive parts as well as correspondance with any owner of one of these motorcycles. remove "" from email address.
thanks for the great site

117. peterlaplante@yahoo.com message: WANTED. ORIGINAL SADDLEBAGS AND BUDDYSEAT FOR 1948 FL. ALSO ANY INFO ON SPRINGER "PARKING LIGHTS" OFFERED AS AN ORDERED OPTION....

116. info=@=beautyofspeed.com message: WANTED: S&S 45" Stroker flywheels. S&S stopped selling their 45" stroker setup, I'm hoping someone out there might have a spare one on the shelf. If anyone has one for sale or know where I might find one please let me know. Remove the = in my email to contact me. Thanks for any help,
Eric

115. DEWGARINC@SECURESPEED.US message: LOOKING FOR 1913 HARLEY TWIN - TIMING CHEST AND COVER EMAIL WITH ANYTHING YOU HAVE THANKS

114. grohde@eotnet.net message: WANTED DEAD OR BROKEN 1902 MARSH ENGINE PARTS,LITE,CARB VALVE LIFTER,ECT.

113. alan@drivesouth.us message: Hello ,I'm looking for a rear frame section for a 741,please email if You can help;I'm located in England but have connections in San Francisco,Alan

112. blackbomber65@hotmail.com message: LOOKING FOR A 1946 -1947 -1948 offset springer ...or just rear leg in good shape {not busted bent re welded}....i know this is a lot to ask but i know there is one out there at a un ridicules price .....trying to gather parts for a 47 knuckle any parts welcome actually.....thanks ......NO NIGERIAN SCAMMERS NEED APPLY...{NOT STUPID}.....thanks george for the opportunity

111. henderson@c.dk message: Henderson engine: 1917, 1918, or 1919.

110. bigestuna@aol.com message: 1927 JD rear fender....will trade for a RARE 1928/1929 JD?JDH front fender..or cash

109. pigstye13@aol.com message: Wanted. I need a decent J slot backing plate for the 41 to 55 Harley Linkert carbs. Anyone out there got one for sale/trade? (903) 873-6644

108. donbishopp@yahoo.co.uk message: i want to buy bikes , used cars and motocycle from any body that want to sell pls contact me with this email address below donbishopp@yahoo.co.uk
regards

107. saxton@execulink.com message: Looking for a GOOD or possibly NOS key & switch assy. for a factory Harley Fairbanks /Morris magneto. Sportster version. Thanks.

106. ebourrague@wanadoo.fr message: Hello,
I saerch parts for 1917-20 Harley j project. Let me know
Regards

105. r_5932@hotmail.com message: Looking for oil pump for 38 EL Knucklehead. It has a raised boss longer than usual where the oil pump pressure switch goes. I have never seen one of these but Palmers lists this as one year only. Thanks Rob

104. garcia_r@msn.com message: WANTED: OEM HARLEY BIG TWIN NARROW STRAP FRONT FENDER... MUST BE SOLID AND IN GOOD CONDITION. (330)-799-3738. Cel (330) 507-3738.

103. acemoto@aol.com message: Wanted Indian , Harley Knuck , Cleveland , Pope , Henderson motorcycles also looking for original paint tanks and fenders any model.
Also wanted any Mint clean Japan motorcycles
email Larry @
acemoto@aol.com or call 917-771-7100

102. work1000@@@@@@earthlink.net message: Looking for 1924-27 Harley JD rotor I have a huge trade box.... or cash
take the extra @@@@ to email me
thanks

101. hogluvr1340@yahoo.com message: Wanted: ServiCar 45" intake manifold, part #1107-36